Flashing error after a succeeded "Done writing SD card to WINCE Device" message
HEllo. After reading and executing the following procedure:
First install http://freewareppc.com/download/util...ryeditor.shtml or any others PPC registry editor
then open it and in key HKLM\Security\Policies\Policies\"00001001" change value from 2 to 1
(before stupid question HKLM means HKeyLocalMachine)
Connect your mobile phone to Activesync or Win7 mobile phone centrum
Open Qmat 5.6
(must be registered version)
(under Win7 you have to run as Administrator)
1 - go to Calculators\Generators
2 - Generate HTC gold card
3 - chose MEGA and memory card in your phone (must to be formated in fat32)
4 - press get SD card serial from WinCE device
5 - save gold card image to WinCE SD
After that make soft restart and you can flash original ROM directly from windows or extract this rom in your PC, rename RUU_signed.nbh file to PB74IMG.nbh ,copy to your card, switch OFF phone, hold vol.down and press pwr.button then continue due instructions on display.
the gold card is successfully made. and i get this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happens that when I try to flash an Portuguese or wwe rom from windows, I still got the CID problem.
Any suggestions?
is your sd card HC (High Class)?!
your sd card must be a 1g or 2g normal, no HC models
sd card
hello. thanks for your reply. my sd is Verbatin 2gb, but no HS.
i am using a cracked version of qmat (version 5.07).
this version is working, and produces the out success output:
"Done writing SD card to WINCE Device"
Then i turn off and turn on again and wait for activesync be ready.
then i run custumupdate rom and i always get the error: invalid vendor (using an wwe rom and an portuguese rom).....
luismatos123 said:
hello. thanks for your reply. my sd is Verbatin 2gb, but no HS.
i am using a cracked version of qmat (version 5.07).
this version is working, and produces the out success output:
"Done writing SD card to WINCE Device"
Then i turn off and turn on again and wait for activesync be ready.
then i run custumupdate rom and i always get the error: invalid vendor (using an wwe rom and an portuguese rom).....
Click to expand...
Click to collapse
i test all cracked qmat and dont work!!
i buy psas and i can change my rom,any version of cracked qmat dont work successful in change
i had success with gold card method. but only PSAS original will work. Thanks reza_majd
Related
Hi guys,
After updating to 2003SE using easy bootloader/himaupdate.exe method my SD locks the unit after insertion or from boot. Was ok before (transcend 256Mb card) worked for last year+ till tonight.
Before I tried that method I bootloader/console dumped old rom image to the card, but ive formatted it now a few times with FAT and FAT32, no luck, still locks unit now.
Any ideas anyone?? Thanks.
Also, accessing start menu now causes a hardware style interlace looking flicker down the bottom 1/4-1/2 of the screen. Anyone???
Congrats and thanks to everyone involved with the 2003SE update, ... now if only this SD card works...
Cheers
WARNING !!!! I have tried a new 1Gb ATP SD Card and a new Kingston 512Mb SD Card and both brand new cards also lock the unit.
It would appear the 2003SE flash is incompatible with some revision hardwares and causes the SD slot to cease working correctly.
Also, the update causes the blacklight to sometimes flicker very fast, likely damaging the life of the backlight.
Be warned...
No problem
No problem .
Get the Pocket Mechanic http://www.antontomov.com
I have fillings it will help .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
Thankyou for the advice, however when inserting the sd card it locks the unit down hard, even with pocket mechanic ready to format, or running from boot quickly before it locks (once detects sd).
Seems the flash really killed the SD slot on my h/ware since no other reports it must be revision related at this point, bootloader can still read/detect updates on SD so its an update issue I think
The biggest problem
:arrow: The biggest problem I had with 2003SE is :
Poping up mesaage with "Need more memory" for Contacts .
I had to do the Hard Reset for a couple times .
Now I am OK .
Hi,
I know that this is an old question, but I did not manage to find a final answer.
Is it possible to use some 8 Gb SD card in a Prophet with WM 6 or WM 6.1?
Thank you in advance for the answers!
Narot
Narot said:
Hi,
I know that this is an old question, but I did not manage to find a final answer.
Is it possible to use some 8 Gb SD card in a Prophet with WM 6 or WM 6.1?
Thank you in advance for the answers!
Narot
Click to expand...
Click to collapse
Man......
It is not about the wm version, but the physical electronic design of the card,
8GB SD card should work with our prophet (if you have) logically,
but not SDHC....
dioxda2 said:
Man......
It is not about the wm version, but the physical electronic design of the card,
8GB SD card should work with our prophet (if you have) logically,
but not SDHC....
Click to expand...
Click to collapse
Man, how can it work? I have tried with my 4Gb SD Card (not SDHC) but it can not recognize. And with the SDHC I have tried the SDHC driver for windows mobile of pras but it can not work too.
The problem can be easily solved by filling the card by dates below the level of 2GB free space (so U have for example 2.1GB used and 1.9 free for 4gb card), only then your card will be recognized by he device. That is because prophet is not able to see more than 2gb of free space on a card.
for yours reference...
tested on 20755 ( other rom same result actually )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well. Now it is imposibble. But let see it later.
Anyway flash under vista works now. Just let Cloudyfa's release.
It needs time. Because he doesnt use Prophet for a long time. And All of you should wait, until his friend borrow him once.
varanusvincent said:
Well. Now it is imposibble. But let see it later.
Anyway flash under vista works now. Just let Cloudyfa's release.
It needs time. Because he doesnt use Prophet for a long time. And All of you should wait, until his friend borrow him once.
Click to expand...
Click to collapse
If I were in Vietnam I will borrow him mine
I'm using normal 4GB SDcards in my Prophet running Varanusvincent's LF3 German.
Everything is working fine.
First 4GB-card: CnMemory 133x (NO SDHC)
Gesamter Kartenspeicher: 3796.57MB (Total storage card Mmemory)
Belegt: 0.01MB (In use) Frei: 3796.56MB (Free)
Second 4GB-card: Platinum (NO SDHC)
Gesamter Kartenspeicher: 3774.14MB (Total storage card Mmemory)
Belegt: 2612.64MB (In use) Frei: 1161.50MB (Free)
Hardy
Hi Guys,
I've just got a new 16GB microSDHC card. I've formatted it in the phone through android and through recovery, I've formatted it with GParted under Ubuntu and I've formatted it under Windows 7 (Quick format).
Despite all this I'm getting an I/O error from ACast whenever I try to download a podcast and the same from Google Listen.
Also when I go to look at the contents of the card in the file manager sometimes it says the card contains the correct files and folders and sometimes it says the card is empty or only has two or so folders.
What's going on? Have I got a dud card?
I'm running Cyanogen Mod 7.0 Stable.
(I'm going to try a long format under Windows 7 now while I'm at work, but I'll check the thread again when I'm home (about 9.30pm GMT)
Cheers
Grindboy
OK a full format under windows 7 hasn't helped. Unless anyone has a suggestion I'm going to return the card for a replacement.
EDIT: Just stuck my original 2gb SD card back in and it's working perfectly so I'm gonna email for a replacement tomorrow. I must say I'm impressed that android picked up the error rather than just spazzing out!
Sent from my Hero using XDA App
when does the problem start? probably it damaged when you create goldcard...?...?
No. My Hero's been rooted since the 2.1 update to too long to come out. I never needed the GoldCard. I've returned the card and I'm just waiting for a replacement now.
Having the exact problem except it's too late to return my card so I need to find a way to fix it. Got a 32gb class 6 right before I traveled. When I put files/folders onto my new sd card from my old one, most (if not all) the folders end up being empty and the most files are missing from the root when I reinsert the sd to my phone or computer. Have no clue what the problem is. I attemped an A2SD as soon as I opened the box so could that've messed it up somehow? Thanks.
I was wondering about the formatting of the card as well. First thing I did ootb was format the card using recovery. I'm thinking that might have been my big mistake. Once the new card gets here I'll try it without formatting and simply using the built in apps2sd which doesn't require a ext partition.
Sent from my Hero using XDA App
I'm running VR13 so i had to use old skool version of A2SD. But really, does ANYONE know what in the funk is wrong with my sd
Buggeration!
The replacement 16GB card is having the same issue. Found a forum thread here which suggests getting Windows to "check and repair" the disk. Gonna try that now, give me a minute to reboot to my windows partition and run the disk check and I'll report back.
[edit] OK that didn't help
Here's the result of the disk check. It says it found and fixed some errors:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But upon trying to download a podcast the download errors out with "I/O Error".
I've emailed the merchant who supplied me with the cards (mymemory.co.uk) they are a really good company and I've used them for years so I'm certain its nothing dogdey going on. Could just be a faulty batch. I'll let you know what they suggest.
I'm having an issue with the SD card in this version. It works fine in android 2.2 thingy.
Total space
Unavaliable
Avaliable space
Unavaliable
Mount SD Card
Insert an SD card for mounting
Erase SD Card
Erases all data..
--
If I reinsert my SD card, It seems to give me a message saying it's been inserted. But it's still not detected. How can I fix this?
Regards.
delete your ext2 or ext3 partition.
only fat32 with 1 partition (you don't need ext2 anymore for your sdcard)
make backup of your sd card before!
I'm unsure how to do this. Also, thanks for your response. It's been total chaos for me. I guess they should've included this step in the installation process.
backup your sd card via computer then format your sd card to fat32 then try if is detected.
sory for bad english
I did that and there is still an issue.
when you insert sd in phone do you select mount sd card? maybe your sd card is not working great
Eyama said:
when you insert sd in phone do you select mount sd card? maybe your sd card is not working great
Click to expand...
Click to collapse
My SD card is fine. It works in every other version (1.6,2.1,2.2) It's not working in android 2.3 so I doubt it's my SD card.
What's the cause of this?
strange it should work on that rom maybe you could yust reflash rom
I've tried reflashing the rom alot of times. It's not working!
Than i dont know ask slade if he know what is wrong here.
Sent from my X10minipro using XDA Premium App
Anyone? help?
hey do you have option in CyanogenMod setting - Performance settings - SD card Cache size
maybe you can try difrent cache size
i hope will work
Not working where is everyone!
go on development forum there you may find a solution or install CM7 gingerbread v13
Right click Computer - Manage - Disk Manager.
Then delete al the ext partions and reformat your card.
do as terrormattie.
makesure you're deleting the right partition and storage.
you can always use other tools like partition wizard to delete or create it later.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's only one partion.
-.-" Up! -.-"
Up!.............
Over a month and still nothing?
UP!
Hello!
First of all, happy new year!
I have a problem with my Honor 7. I have a Toshiba Exceria 128 GB SD Card. When I inserted it, my phone recognized it in the parameters menus but it gave the SD Card a strange name: 1489-D352. And of course /sdcard/ cannot be found...
My configuration:
Honor 7
Build PLK-01C432B380
EMUI 4.0.1
Android 6.0
Til I didn't consider as the main storage place in the parameters, /sdcard/ can be found and it corresponds to internal storage. As soon as I declare the external sd card as the main storage, it starts malfunctionning.
As the name isn't correct, lot of applications can't find SD Card path and I have to set it manually for every application that needs to write on the SD Card.
I formated it in my phone, in my computer, exFAT or NTFS. Started the phone with the SD Card, without it, format it before, after... Nothing changes...
Can you help me, please? And forbid my english as I'm french...
i got toshiba 32 gb sdcard working fine as ext_SdCard.... android 6.0 emui 4.1
Thanks for you answer, Thelous. How does it appear when you want to access to it?
BBBenj said:
Thanks for you answer, Thelous. How does it appear when you want to access to it?
Click to expand...
Click to collapse
this is what it shows in flile explorer, ive selected sdcard as main storage in settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is what I have...
have you tried using FAT32 format?
Formatting in FAT32 is impossible from Windows. I opened a Command Windows and I launched "format J: /fs:fat32". But it takes a while to foemat 128 GB ! 3% right now.
I'll come back to give news when it's ready.
Volume is too big for FAT32...
Any other idea ?
BBBenj said:
Volume is too big for FAT32...
Any other idea ?
Click to expand...
Click to collapse
my sd card runs on ntfs.... (changed when i was moving 5gb+ files and there was limit)
OK, I formated my sd card with NTFS file format.
If it's not main storage location, it's OK. It's named sdcard and everything is OK... Except that there's only 2GB left on main storage !
As soon as I changed my main storage location to external sd card, everything goes wrong.
But, in the third and last screen capture, you can see what Files (correct application name ???) shows: sd card. Correct name but it's the only place it appears so. In other applications, the sd card is named 9CB87....
GAAAAAAAAAHHHHH!
Coucou !
Still no idea ? As it's a real problem for me.
Anytime I insert my new sd card and wait for a while it dissapears and i re-insert but still the same.
i dont know if its my phone but it works ok when am using the pc