help me please bro,, i want hacked my htc hd 2 and first i flash with hspl in this
and susscessed,,
and next my step is flashing stock room and i download in this
Code:
4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
i download stock rom LEO 2.10 next my htc hd2 updating sudenly htc hd2 restart before finished update the screen after restart is triangle look like this pic
and i tried another stock rom but the screen like this
and im waiting but the loading never finished
this my tricolor
SPL 2.08 before i flash stock rom my spl 1.42
anything idea how to fix my htc hd2 problem ???
thanks for your help
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
ClydeB1 said:
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
Click to expand...
Click to collapse
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
thats correct
you must go into bootloader mode, start the the tool and then u can install it(push and hold volume down+turn on the phone)
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
ok i'll try bro thanks again for ur help...u have yahoo id bro?
****thefuckerz said:
ok i'll try bro thanks again for ur help...u have yahoo id bro?
Click to expand...
Click to collapse
Pleasure m8. No I don't. You can PM me though if you have more questions.
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
****thefuckerz said:
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
Click to expand...
Click to collapse
Load spl 2.08.hspl by running the hspl2 tool. Once that is successful (check in bootloader again to see that it has successfully installed) then you can flash to the rom of your choice.
hi pls help
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
loonyozzy said:
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
Click to expand...
Click to collapse
Enter bootloader and supply all of the info you see there.
Actually you can't do much wrong. just connect the to your pc and then use the brilliant hspl2 to hack your spl on the phone, and then you can reflash the rom....
I have had same symptoms, tried everything... then....
Finally I have noticed that I can't flash through USB because on my micro-sd card I have placed LEOIMG.nbh which caused HSPL error 0028002
Before you flash remove micro-sd.
I hope my experience will help.
SAME problem no resolution
HI I have same problem Screen with exclamation mark then boot screen with gour colours showing this
HX-BC
SPL-1.42.0000 XE.
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So I've tried to install HSPL 1.42 With no card inside but during installation i get.
Download http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
1. Remove micro SD card.
2. Reboot phone while holding volume down.
3. Connect to the PC via USB.
4. Run HSPL2_RUN.exe and follow the steps on your screen
Same problem
Hi, I have also this problem. I tried to install the stock rom but during it an error occured and it stopped before finished. Then there is the triangle and "software update failed". My spl says that I have the version 3. and something and also when I try to run the hspl.exe an error occurs that says that a file RAPi.dll cannot be found and then it waits for usb connection and finaly an error occurs "cannot connect".
Please could someone help me ? WHat am I doing wrong ? Or what should I do ?
thanks
Related
Hi i'm newbie
I'm french thus excuse me for my english
I try to upgrade my htc in WM6, i sucess, no problem.
After i upgrade with a rom radio and the upgrade block at 40 %.
Now the phone boot in tricolor mode.
IPL-1.04
SPL-2.10.Olipro
I find in the forum that for unbricked my htc i must to flash any rom in nbh format.
How to do that.
I try to install also original ROM_9600_FRA_10303.exe rom but activsync it not active.
Someone can help me please
thanks
Connect you device in bootloader screen with your PC with USB and you should see USB appear at the bottom of the screen on yor device. Now flash any .nbh with the RUU wrapper and select SPL 2.10 New bootloader and flash the ROM...
what is the RUU Wrapper, where can i download it?
unikgwada said:
what is the RUU Wrapper, where can i download it?
Click to expand...
Click to collapse
Here it is
RUU wrapper is a software?
Explain me which is it
unikgwada said:
RUU wrapper is a software?
Explain me which is it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298737
when i use RUUWrapper i havbe an error [260].
What i can do
In the tri color screen with the device plugged in via USB do you have USB written at the bottom? Does your device appear in the device manager?
Yes USB is written on the bottom, and yes the phone appear in device manager .
What are you using XP or vista?? You could try a different USB port or if that doesn´t work you may have to roll back the driver... read this http://forum.xda-developers.com/showthread.php?t=299657
I'm using XP.
When i use myyt.exe the phone make something, but when i try to upgrade any rom i have always this message error [260]
i try to update with rom radio 1.47.00.10 , the upgrade is correct 100%
but when i reboot i return in tricolor mode
I success to install rom with UUwrapper but now the phone block on the picture windows mobile
Thanks
i fine a the solution
Could you please share the solution ? I've got a similar case, thanks.
Hi I have looked through all the threads and cannot find any help can some one help I tried to flash my rom and now the imate is stuck on the bootloaders screen ? Red, Green,Blue with IPL 1.00 and SPL 2.13 but it will not connect via USB to recover. I have tried all the steps shown but with no connection its not working. Thanks in advance and I hope someone can help.
taylor99 said:
Hi I have looked through all the threads and cannot find any help can some one help I tried to flash my rom and now the imate is stuck on the bootloaders screen ? Red, Green,Blue with IPL 1.00 and SPL 2.13 but it will not connect via USB to recover. I have tried all the steps shown but with no connection its not working. Thanks in advance and I hope someone can help.
Click to expand...
Click to collapse
1. try my post @ my signature, since your device had not done HARDSPL,
steps are:-
1. choose your favourite nk.nbf (from new rom) and put in the the folder of my tool ( that you had downloaded to your PC),
2. force Prophet into bootloader manually ------> very very important,
3. plug to PC and you should see the " USB" on the Prophet screen,
4. double click "upgrade.bat" from my lazy tool,
5. wait, and follow the on screen instruction,
6. DONE
4. double click "upgrade.bat" from my lazy tool,
Click to expand...
Click to collapse
That won't work as your tool needs an active sync connection!
Please read this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
follow it, and then after that, dioxdas tool will work.
I did my first flash a few days ago, eventually i had the same problem you have, I downloaded the original rom for my phone from an ftp (forgot the link) and it flashed successfully (no other rom was working!) from bootloaders screen then upgraded back to wm6.1 Hope this helps!
I have a small question for the experts, my IPL is 1.00 and SPL is 2.13, does this mean I have a g3 phone?
Good Luck!
mouhahaha said:
... my IPL is 1.00 and SPL is 2.13, does this mean I have a g3 phone?
Click to expand...
Click to collapse
Yes indeed, your device is G3.
Yes, you have a G3 device.
Imate OK now
Thank You guys My Imate is working now , I salute your skills and expertise
Thanks
My Raphael is dead...
1. I flash Hard SPL 1.90.OliNex
2. I flash original Russian ROM and have this message on screen "Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center"
3. I flash stock SPL
and now when I'm trying to flash any ROM or Hard SPL I have on the screen of PC "0% image upgrade in progress" and "0%" on the screen of Raphael
after some time on the screen of PC I see ERROR [262]: UPDATE ERROR
What I must to do?
Help me, please
P.S.
Now when I'm trying to flash HTC_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_R aphael_52.33.25.17_1.02.25.19 I have "Invalid Vendor ID" Message
dishef said:
P.S.
Now when I'm trying to flash HTC_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_R aphael_52.33.25.17_1.02.25.19 I have "Invalid Vendor ID" Message
Click to expand...
Click to collapse
When you receive "Invalid Vendor ID", than your device is not Hard SPL! Please follow the update procedure again. There must have been something wrong.
DeepThought said:
When you receive "Invalid Vendor ID", than your device is not Hard SPL! Please follow the update procedure again. There must have been something wrong.
Click to expand...
Click to collapse
But when I'm trying to flash Hard SPL I have ERROR[262]
Does any method to flash Hard SPL from SD card exist?
dishef said:
But when I'm trying to flash Hard SPL I have ERROR[262]
Click to expand...
Click to collapse
Read here please http://forum.xda-developers.com/showthread.php?t=425922
taiseer999 said:
Read here please http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
sorry for the offtopic (or not...)
i have tryied many times to connect to my TP using mtty, but no luck. i'm using Vista Ultimate, and can connect and use mtty with my Kaiser, but can't with Raphael.
Is there any special thing i need to do to get mtty working with raphael?
Thanks in advance
Cheers
jcespi2005 said:
sorry for the offtopic (or not...)
i have tryied many times to connect to my TP using mtty, but no luck. i'm using Vista Ultimate, and can connect and use mtty with my Kaiser, but can't with Raphael.
Is there any special thing i need to do to get mtty working with raphael?
Thanks in advance
Cheers
Click to expand...
Click to collapse
Have you remembered to disable USB connections from activesync connection settings?
taiseer999 said:
Read here please http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i used the MTTY to format the device
but still have ERROR[262] when trying to flash Hard SPL
using info 2 on MTTY i got "HTCSHTC__J15Wаа`HTCE"
but I have HTC Raphael (Touch Pro)
does any way to flash hard spl with MTTY exist?
or may be I can flash ROM with MTTY?
i have this problem whit hard spl
i test it whitout sim-micro sd-win xp-win vista-i dont use usb hub
i use ssple but i had 262 error again and pc was hang on 0%
i have touch pro
i dont want MTTY
it's risk
maby my phon is going to be off for ever
This procedure can damage your phone
hi friends,
i have a htc dual touch with french language ,
i want to change the language to english ..
first i treid to do hard spl (getting error , not starting)SPL_1160000_Ship.exe
ps help me...
the info is
NIKI 100
SPL-10.16.0000
CPL4D
AND THE VERSION IS 131.71.09.........
and i have run the file
1."RUU_****_HTC_WWE_11340501_Radi.exe"
2.RUU_****_HTCASIA_AUS_13171012_.exe
3.RUU_****_HTC_WWE_2094051_Radio.exe
and the hard spl file "hardspl-1.22-****-shipped.zip"
but getting error
pls help me
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
can anybody tell me why its not starting even the hard spl??
ameerali19 said:
can anybody tell me why its not starting even the hard spl??
Click to expand...
Click to collapse
Sorry buddy, but you don't have hardspl and that is your problem, so you have to do the hardspl again.
Succes
sir
i have tried with these hrad spl files....
1.hardspl-1.15mfg-nike.zip
2.flash-hardspl-niki.zip
3.Hard-SPL-Neon.zip
4.hardspl-1.22-nike-shipped.zip
if i am wrong can you give me a good /working hard spl??
or how can i cid unlocikmthe phone(i dont know the phone is cid licked or not)
thanks in advance
Hi buddy, try this
1. Copy the sspl 1.16 to your phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Greetz,
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
ameerali19 said:
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
Click to expand...
Click to collapse
You have to flash the hardspl from your computer (same procedure as flashing a rom) while your phone is conncted to your computer and not try to run or launched it from your phone.
Greetz,
now its running suddenly to 100% and geting the error(244)
i have tried with the file
hardspl-1.15mfg-nike.zip
and
Hard-SPL-Neon.zip
pls help me
thanks in advance
Just do as I wrote above and don't try to use another Hardspl which is not ment for your device, because error 244 means that you have used the wrong RUU to do the upgrade.
If you have trouble's to flash the hardspl 1.22 just do it from the bootloader to get in the bootloader is turn your device off and turn it on while pressing the on/off button and the camera button on the same time.
Now you are in the bootloader (it's a 4-coloured screen with some text) connect your phone on your computer, phone must stay in bootloader and then flash Hardspl 1.22 from your computer.
That will do the trick.
Greetz,
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
run sspl1.16 on phone
disconnect USB cable
kill Active sync (or disable AS USB connections)
connect USB cable
run hspl 1.22
it must work...
or go to friend and do it on his computer...
ameerali19 said:
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
Click to expand...
Click to collapse
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
addgsm said:
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
Click to expand...
Click to collapse
Send me a pm and I'm gonna try to help you
Greetz
ameerali19 said:
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
Click to expand...
Click to collapse
i have same Problem ......
any other idea ?
Thanks.
denva said:
i have same Problem ......
any other idea ?
Thanks.
Click to expand...
Click to collapse
Hi denva, try it this way http://forum.xda-developers.com/showpost.php?p=11218363&postcount=701
Greetz,
I have HTC HD2 t-mobile version. my phone now is broken i am not sour should I do with it anymore. it stuck at 1st screen. please help me
this my spl
PB81120 HX-B3
SPL-3.03.HSPL XE
0X05
CotullaHSPL 0X40
T-Mobile.com
Get latest 3.14 rom
From bootloader (stripey screen)
Plug in USB cable
Run 3.14 rom.exe
Report results.
I download that it is install 8% and error
samsamuel said:
T-Mobile.com
Get latest 3.14 rom
From bootloader (stripey screen)
Plug in USB cable
Run 3.14 rom.exe
Report results.
Click to expand...
Click to collapse
What did you do last before this issue occurred?
Search for "task29" and do this, that might also help. After that flash with your favorite rom(probably the one you were trying to flash)
You can also look on youtube for "task29 hd2" for some tutorials.
I was change my phone to andriod but I don't like it. so I want to change it back to window mobile when I doing it. it is error . so I try flash different radio and how it error. anyone have any idea how to make my phone working? I need phone to use please help me
thanks so much
Marvlesz said:
What did you do last before this issue occurred?
Click to expand...
Click to collapse