Hi to everyone, i'm in a dire need to uninstall a HSPL from my device, the only way tio do that, as i was told, is to install a fresh offical rom from sd card: my problem is that i don't know how or from where extract the proper .nbh file.
I've installed the hspl and a cooked rom, then, i've stupidly overflashed an offical rom. Now i can't reinstall any cooked rom, nor uninstall hspl again.
Thanks in advance for any advice or hint.
You said you have flashed an official rom. You might have already removed HSPL.
just to make sure you have hspl on your device power off your device. then press volume down button, hold it when short pressing the power button.
this will bring your devece in bootloader screen which is red,green,blue and white.
you should see something here like
SPL-1.42.HSPL XE
cotullaHSPL
1.42 is the version of hspl. if it is different you have used a newerone.
report here what you see on the screen
we will be able to help you further
When you run any stock .exe file, it extracts the contents to a temp folder on Windows and runs the RUU.exe from there.
Simple way how I get it is :
(1) Run the stock packed exe (Keep it open, do not click next)
(2) Goto Run prompt in Windows, and type %temp%
(3) The new folder that opens is the temp folder being used by Windows
(4) Sort the folders by Date and see the latest modified one probably like Zip... or Rar... something
(5) you will find the .nbh files inside this folder
Copy away wherever you want
Copy this nbh to root of your card and name it LEOIMG.nbh
Restart phone...keep Vol Down pressed and when asked press Power button....Happy Restoring
The problem is that HSPL seems to not work, i've done all the passages shown in post #3, but when i restart os from sd, a new 1.66 SPL appears instead of mine 1.4200 and then it goes stuck, i've to put in bootloader and load the rom from the original .exe package, if i try to run the HSPL again, it shows the "we've hacked" screen, but when i try to load a cooked rom, appear the warnigns about the bootloader and the getinfo, therefore i flash and in the end i arrive always at the same stuck white htc logo, what's wrong?
Thaks for the answers
Marco
extract it use seven zip or WinRAR......Right Click In rom ship.exe and choose Extract file and you can see the .nbh file in extracted folder
The windows in our computers not read .nbh !!?
what is application needed to run .nbh?
poketpc.htc said:
The windows in our computers not read .nbh !!?
what is application needed to run .nbh?
Click to expand...
Click to collapse
You need to use the attached file.
i have custom ruu from 2 days but i don't know how i can use..
any way thank you.
poketpc.htc said:
i have custom ruu from 2 days but i don't know how i can use..
any way thank you.
Click to expand...
Click to collapse
You need to read the stickys in the ROM Development forum and learn how to do it. Don't start trying to flash a new ROM before you have any idea of what you are doing, you could brick your HD2.
Read here for a brief overview, and look over the stickys in the ROM Development section so you know what you are doing.
They are talk about HTC HD and my phone is HTC TOUCH HD
ex: they are asking for SPL 1.42.0000, SPL 1.42.HSPL, SPL 1.62.0000, SPL 1.66.0000, SPL 1.66.HSPL,
SPL 2.07.0000, SPL 2.08.0000 SPL, 2.08.HSPL
and in HTC TOUCH HD we dont have like this rom
i don't know. what is going on.
poketpc.htc said:
you talk about HTC HD and my phone is HTC TOUCH HD
Click to expand...
Click to collapse
Sorry but LOL!
Try here: http://forum.xda-developers.com/forumdisplay.php?f=453
poketpc.htc said:
you talk about HTC HD and my phone is HTC TOUCH HD
Click to expand...
Click to collapse
you are in the wrong area of the forum then
Related
Sorry if this is a stupid question but I am in a hurry so have no time to search and investigate in this mater by myself for now!
I have flashed several roms in the past, right now I am running RomeOS 1.40
However I have now sold my device and need to revert to the original rom and SPL!
I have the Swedish rom, but the problem is that the file I have is RUU_Signed.nbh I dont have the wrapper or what it is called so that I can flash my raphael!
Also, do I need to SPL lock the device again? and if so how do I do that?
Last but not least, after flashing RomeOS, I got alot of information on the first screen (You know when you first start the device where it shows the radio version and everything!) But the problem is that I have tried to flash other roms but the information on the first screen is still there!
How do I get rid of it so it looks like the original?
Hope you know what I mean and how to help me!
Thanks in advance!
branko.savic said:
Sorry if this is a stupid question but I am in a hurry so have no time to search and investigate in this mater by myself for now!
I have flashed several roms in the past, right now I am running RomeOS 1.40
However I have now sold my device and need to revert to the original rom and SPL!
I have the Swedish rom, but the problem is that the file I have is RUU_Signed.nbh I dont have the wrapper or what it is called so that I can flash my raphael!
Also, do I need to SPL lock the device again? and if so how do I do that?
Last but not least, after flashing RomeOS, I got alot of information on the first screen (You know when you first start the device where it shows the radio version and everything!) But the problem is that I have tried to flash other roms but the information on the first screen is still there!
How do I get rid of it so it looks like the original?
Hope you know what I mean and how to help me!
Thanks in advance!
Click to expand...
Click to collapse
The wrapper is included in the attached file along with the htc splash screen. the original spl also in there so do the following:
1- extract the zip file and put the customruu + your RUU_Signed.nbh in one folder and run that to get your original rom
2- put now the customruu + htcsplash together and flash to change the splash screen
3- Now use the spl tool to revert to the original spl
karimartine said:
The wrapper is included in the attached file along with the htc splash screen. the original spl also in there so do the following:
1- extract the zip file and put the customruu + your RUU_Signed.nbh in one folder and run that to get your original rom
2- put now the customruu + htcsplash together and flash to change the splash screen
3- Now use the spl tool to revert to the original spl
Click to expand...
Click to collapse
Thank you, I did everything you told me and it worked like a charm!
I cant thanks you enough!
The flashing can now begin (without fear of not being able to return it to stock form)! And for those who need a way to return to stock form, HTC has come through!
http://www.htc.com/us/support/pure-att/downloads/
HTC PURE (AT&T) Original Ship ROM | 02.05.2010
This software is the actual ROM that the HTC PURE (AT&T) shipped with. less
In the event that the device has a fatal error and cannot be recovered by Soft Resetting or Hard Resetting the device, it may be recovered by reloading the original ROM. Please note that during this recovery process, the device will be Hard Reset and anything that is NOT part of the Operating System (contacts, calendar, music, etc) will be permanently deleted; always make a point of backing up your devices data on a regular basis!
Instructions:
1. Download and save the HTC PURE (AT&T) Original Ship ROM to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (tri-colored).
5. Once it bootloader mode, wait for "serial" which shows at the bottom of the screen to change to "USB".
6. Once USB shows on the device, on your PC double click on the HTC PURE (AT&T) Original Ship ROM to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
http://member.america.htc.com/download/RomCode/HTC Pure/HTCPUREATTOriginalShipROM.exe
A BIG THANK YOU to HTC!
will it change spl
for flashing we use hard spl 1.83olineix
will it change back to stock spl after the flash
Good eye dynamius; I've been hoping that this would show up at some point.
Is this with 2.1 manila?
manila 2.1
chikoo said:
Is this with 2.1 manila?
Click to expand...
Click to collapse
Unfortunately this is with manilla 2.1.
Does this mean we should expect to see a new official ROM in the near future though?
mizzikedamosher said:
Does this mean we should expect to see a new official ROM in the near future though?
Click to expand...
Click to collapse
There is already a new leaked rom but needed to a new hspl to flash it.
Cant Download
Hi
I can't download this rom.
I click in the link and it redirect me to another page, and I keep looping.
Now I'm in Costa Rica and maybe I need to be in USA to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
Thanks
blancofran said:
hi
i can't download this rom.
I click in the link and it redirect me to another page, and i keep looping.
Now i'm in costa rica and maybe i need to be in usa to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
thanks
Click to expand...
Click to collapse
MEGAUPLOAD: http://www.megaupload.com/?d=E01IBRNN
opensea said:
There is already a new leaked rom but needed to a new hspl to flash it.
Click to expand...
Click to collapse
Where is this official leaked ROM you speak of for the pure?
Only ROMs I see out is 3rd party cooked ROMs. Not anywhere close to the quality of official ROMs. And only ROMs that I've seen out that makes a huge difference in anything is the ones with Manila 2.5. Which are horrible in the sense that MMS doesn't work on them, because there is no way of opening it unless you do a registry hack and add a cab for it to open in windows messaging client.
finally! i've been looking forward to this
Thanks
Hey. Thank you very much
Hi
Hello How can I change the band to the following:
Network Type : GSM
Band Frequency: GSM (900+1800+UMTS(2100+900)
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
PURE dialer canvas
Great find! Any chance that someone could / has extract(ed) the phone canvas out of this rom to see if it addresses the delay issues associated with the topaz and leo roms?
great find buddy
naplesbill said:
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
Click to expand...
Click to collapse
that was a awesome work buddy ..
perhaps someone can re package the relocker with spl found from the download
Sucess
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
So that confirms you have to relock the spl before it will replace the hardspl with the original spl. That is good to know.
relocker replaces the spl to stock spl version 1.33
flashing again flashes the spl to 1.83
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
which rom ? ive downloaded the exe and notcied there were 2 nbh files, just wasnt sure
Hi, i need to remove HSPL and wonder if anybody have a stock...i mean stock rom for Sweden (SE). All i found is broken links. From HTC Sweden 1.48 and 1.66 can be downloaded. But we started out on 1.43 and i guess thats what i need to get rid of HSPL.
HTC Support site?
Try downloading one of these from HTC Support. (You will need your serial)
Then start the upgrade utility, follow instructions until you need to awknoledge you have read the warning in red.
Now in your temp folder there will be a folder containing the ROM (RUU_signed.nbh). (in my case the folder is named pft100.tmp)
Copy the ROM to a safe place
Close upgrade utility.
Now follow instructions as in Flash guide:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
This method removes HSPL!!
slightly simpler ways to get the ruu_signed file
right click the rom.exe choose extract here
or
right click the rom.exe and choose open with (winrar, winzip ro whatever)
or
right click the rom.exe choose rename and change the extension from .exe to .zip then double click the file to open it with winrar/winzip whatever you have installed.
however you dont really need to extract the .nbh file anymore, you can run hspl2 and choose 1.66.0000 (or 1.42.0000) and then when it has done hspl is now gone, and you can flash the rom over usb by running the .exe.
Also, , Leo Official Roms thread, first post first link, , the 1.48 and 1.66 folders both contain SVE stock roms.
Thnx for your quick and detaild responses.
Why i asked for a official 1.43 or old Swedish rom was because i have done the steps above (Exept using HSPL2) and when i boot (with volym down) nothing happens, text is saying serial on boot screen.
Now, im using the first HSPL (perhaps the first ever to come out) version since my phones is old now (almost a year =). Could maybe this fix it, and isnt HSPL2 for us modells of HD2?
Nakazul said:
Thnx for your quick and detaild responses.
Why i asked for a official 1.43 or old Swedish rom was because i have done the steps above (Exept using HSPL2) and when i boot (with volym down) nothing happens, text is saying serial on boot screen.
Now, im using the first HSPL (perhaps the first ever to come out) version since my phones is old now (almost a year =). Could maybe this fix it, and isnt HSPL2 for us modells of HD2?
Click to expand...
Click to collapse
nope, hspl2 is for regular hd2, , the first one that you have only supported 1.42.0000, hspl2 supports all spl versions. HSPl3 is for US tmous hd2 (and telstra).
Downloaded HSPL2. Installed Swedish stock rom 1.66 and used HSPL2.... it worked, incredble. Thnx for the help all.
Just Download the first rom availible from htc.com and install it. Mine was RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship and after installing i used HSPL2 to go back to hspl 2.08.0000
Good luck
that didn't work for me
Pleas sir be aware that the use of HSPL on latest stock ROM 3.14 reduce your available free program memory to +/- 50MB!!
I always just use the SD card flash method. Download official ROM from HTC.com, extract it using WinRAR and then rename the .nbh file to leoimg.nbh. Copy this leoimg.nbh file to an empty microSD card and insert it into the phone. Turn off the phone, and then turn it on while holding down the volume down button. Your phone will go into the bootloader and ask you whether you want to flash the rom. Confirm this and you're good to go.
Easy, effective and pretty much failsafe. It will simply install the SPL that was included in the ROM, allowing you to re-apply HSPL or whatever you prefer.
les_paulde said:
I always just use the SD card flash method. Download official ROM from HTC.com, extract it using WinRAR and then rename the .nbh file to leoimg.nbh. Copy this leoimg.nbh file to an empty microSD card and insert it into the phone. Turn off the phone, and then turn it on while holding down the volume down button. Your phone will go into the bootloader and ask you whether you want to flash the rom. Confirm this and you're good to go.
Easy, effective and pretty much failsafe. It will simply install the SPL that was included in the ROM, allowing you to re-apply HSPL or whatever you prefer.
Click to expand...
Click to collapse
that only works for nonbranded hd2's.
just an info, so that not everyone here around thinks, that he can do it like that
DN41
DN41 said:
that only works for nonbranded hd2's.
just an info, so that not everyone here around thinks, that he can do it like that
DN41
Click to expand...
Click to collapse
Ah ok, I didn't know that. Thanks for the update!
it's a pleasure
DN41
les_paulde said:
I always just use the SD card flash method. Download official ROM from HTC.com, extract it using WinRAR and then rename the .nbh file to leoimg.nbh. Copy this leoimg.nbh file to an empty microSD card and insert it into the phone. Turn off the phone, and then turn it on while holding down the volume down button. Your phone will go into the bootloader and ask you whether you want to flash the rom. Confirm this and you're good to go.
Easy, effective and pretty much failsafe. It will simply install the SPL that was included in the ROM, allowing you to re-apply HSPL or whatever you prefer.
Click to expand...
Click to collapse
I have downloaded the 1.66 NOR update. If i follow your method, will I be able to install HSPL and flash custom roms?
Svendheim said:
I have downloaded the 1.66 NOR update. If i follow your method, will I be able to install HSPL and flash custom roms?
Click to expand...
Click to collapse
Yes sir. previous stock ROM versions are compatible with HSPL.
And about flashing over SD downgrade your SPL version.
I have the HTC HD2 TMoUS with the most recent stock rom (3.14.5xx) but for some reason the spl is still 2.10 rather than 3.03. Does anyone know how I can get spl 3.03 so that I may run android on the phone (I have tried searching, but have not been able to find anything).
kurt-willems said:
Yes sir. previous stock ROM versions are compatible with HSPL.
And about flashing over SD downgrade your SPL version.
Click to expand...
Click to collapse
hello,
i have a problem with spl 3.03..... on htc hd 2, because when i load the soft, the SKIP its not response when i touch the phone screen, its blocked, no reaction. and the phone its blocked, not working anymore.
What can i do
the same problem is in spl 1 48 or 1 66.
thanks so much, for any advise
How can I get more device space on a cooked rom. Regular stock rom has over 600 mb of device space and cooked roms only have about 40 mb of rom. How can I create more space. I keep getting phone running low on stoaage message on every cooked rom I put on my phone.
Thnaks for your help.
that is kinda strange, as i have the opposite.
task 29 before installing new rom?
what roms have you tried? energy always seems good.
Sounds as though you have HSPL and a 3.14 based ROM.
I have tried using Enegry Dinik of Glass rom and it give me that message also. How do I perform task 29.
Hey I have HSPL and yes it's a 3.14 Rom. what should I do to get more space.
Thanks
kasualnupe2 said:
Hey I have HSPL and yes it's a 3.14 Rom. what should I do to get more space.
Thanks
Click to expand...
Click to collapse
Get start to remove HSPL: Use HSPL_RUU.exe and select a spl value.
And reinstall Stock ROM 3.14
Stock ROM 3.14 isn't compatible with HSPL!
should I try to put an older rom instead of 3.14. Is there a video on how to put new rom on sd card or how to remove hspl.
kasualnupe2 said:
should I try to put an older rom instead of 3.14. Is there a video on how to put new rom on sd card or how to remove hspl.
Click to expand...
Click to collapse
There are two ways to do it:
A)Over ActiveSync
1) Download HSPL2_RUN.exe
2 Connect your device to your PC
3) Run HSPL2_RUN.exe and set your SPL value to SPL 1.66.
2. Soft reset your device after you have done that.
3) Download with your S/N from the HTC webpage your ROM version 3.14
4) After downloading this to your PC, connect device to PC and be awair that it is well connect over ActiveSync or WMC
5) Run the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file from your PC as administrator.
6) Follow the steps on your screen
Click to expand...
Click to collapse
Or
B)Over SD card
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your device screen
Click to expand...
Click to collapse
Thanks alot for the videos. So, when I want to put another custom rom. Should I use 3.14 Rom or something older, so I don't have this problem anymore. Or could I hardspl and boot android with tm us stock rom. I really like android and trying to get up to putting nand android on my phone.
Thanks for all you guys help.
I can't get hardspl to run it keeps giving me an error. So, I can unistall hspl 2.08hspl. I can't do the SD card because my sd card is 16gb. So, do you know what I can do.
Thanks
kasualnupe2 said:
I can't get hardspl to run it keeps giving me an error. So, I can unistall hspl 2.08hspl. I can't do the SD card because my sd card is 16gb. So, do you know what I can do.
Thanks
Click to expand...
Click to collapse
are you running it as an administrator (right click, run as administrator). if you got hspl on your phone via activesync, you should be able to get it off.
You cannot run HSPL on a 3.14 ROM as the SPL is 3.03.
First find an older version of your ROM - go to the HTC website and download a 2.10 ROM using your phone's serial number (this should guarantee that you are using a correct ROM for your phone). Flash the phone with that ROM. Now the SPL will no longer be 3.03.
Run HSPL3 and select 2.08.HSPL.
Make sure that the RADIO is 2.08.50.xx or higher with a .50 (it should be mentioned in the ROM download name as like 2.08.50.14)
Now go to the NAND Andriod section, pick a ROM and carefully read the instructions.
Does anyone know why I am recieving a Write Flash Error
kasualnupe2 said:
Does anyone know why I am recieving a Write Flash Error
Click to expand...
Click to collapse
Maybe you used a wrong stock ROM??
I can't find them on HTC website. I tried looking from hd2 phone cateogory but I can't find any.
kasualnupe2 said:
I can't find them on HTC website. I tried looking from hd2 phone cateogory but I can't find any.
Click to expand...
Click to collapse
Can you communicate your S/N, I will look for you.
S/n - sh05cpr04279
thanks
kasualnupe2 said:
S/n - sh05cpr04279
thanks
Click to expand...
Click to collapse
Based on your S/N you have a branded device ore a device aria who isn't updated yet.
Pleas use GoldCard Technique for installing a stock ROM 3.14 read more about it
thanks I will try it
kasualnupe2 said:
thanks I will try it
Click to expand...
Click to collapse
You're welcome sir.