NEW RELEASE
Hi. This is a special app for clients of Caixa Geral de Depósitos, a portuguese Bank.
This bank uses a matriz card to validate online banking.
Requirements:
-> .Net Framework 3.5
-> All resolutions
-> Instructions in the app
Special features:
-> Encryption
-> Password
Also in MS Marketplace, xda marketplace and freewarepocketpc.net (omarket)
UPDATE - http://forum.xda-developers.com/showpost.php?p=6992447&postcount=12 bug solved!
Sorry, please delete
error posting
good app.
I can leave my matriz card at home now
PS: just a question?? Will this send my data to you
mikhe69 said:
good app.
I can leave my matriz card at home now
PS: just a question?? Will this send my data to you
Click to expand...
Click to collapse
No, but if you want i can put here the source and you compile it.
BTW, wonderful ideal, i will upload it.
Hi. It's already uploaded.
IF anyone want to help me to develop, i will be glad.
New release v1.2 with CAB and improved!
herpez said:
NEW RELEASE - v1.2
Hi. This is a special app for clients of Caixa Geral de Depósitos, a portuguese Bank.
This bank uses a matriz card to validate online banking.
Requirements:
-> .Net Framework 3.5
-> WVGA or VGA
-> BEFORE the first start, edit matriz.txt in the app folder and change it to your matriz card. After the 1st run, that file will be encripted, renamed and the txt deleted.
ToDo:
- add password to open
- QVGA support
If anyone want to help me changing the source to make some of the "ToDo", i would be very thankful.
Click to expand...
Click to collapse
Tnks!! will try it
but I advice to think well before you put your data in any electronic media....
if there is only the matrix card data, then nothing special can be done.
you will have to know also the login and the password, or else it will e totally useless.
I will try it as well.
PS: There should be an app to replace ATM, identity, social security, finance, and all cards, so I can leave my wallet at home
gluonyc said:
Tnks!! will try it
but I advice to think well before you put your data in any electronic media....
Click to expand...
Click to collapse
Sure, but i guess that the odds to loose your PDA or someone access data on it its the same as loose your wallet (with matriz card inside) or someone check it.
Although, aware of that, thats the reason i encrypted the file, i deleted the matriz.txt and i will implement password. I may call it try to lower the odds of something bad happen, however, it's always a risk
Hi
Just one question this programs works well???
i try but the numbers are not my numbers
Best Regards
Hi. Yes, it works. However i think that something can go wrong.
But lets check first some things.
Did you edited the file matriz.txt to your matriz? If not, you need to do that BEFORE run the app for the first time, otherwise you will get a default matriz card which is random.
If you didnt edit, and now that you have run the app, let me say how you can do it.
Go to you app folder, which maybe /Program Files/Matriz CGD/ or /Storage Card/Program Files/Matriz CGD/
Then delete a file called matriz
Then, in your windows notepad, edit the file i posted as attachment here to your card. For example, if your matriz is 123 687 497... it will become 1 2 3 6 8 7 4 9 7 ... and do it for ALL the numbers, this way you will replace the entire numbers in the attached txt.
Then, put that file (the matriz.txt) in your app folder (maybe /Program Files/Matriz CGD/ or /Storage Card/Program Files/Matriz CGD/)
Any doubt just say, or if you want we can talk by pm.
Thanks
Hi,
I did leave a comment on windows marketplace for your application, did you see that?
I already installed the new release but I found an error that crash the application. If I push the button "calcular" after putting the password, the program shows an error and close because no column or line is selected.
regards
rhcpu2 said:
Hi,
I did leave a comment on windows marketplace for your application, did you see that?
I already installed the new release but I found an error that crash the application. If I push the button "calcular" after putting the password, the program shows an error and close because no column or line is selected.
regards
Click to expand...
Click to collapse
Hi. I didint see it yet. One new release is on its way and i will update that.
Thanks for let me know, i miss the feedback
rhcpu2 said:
Hi,
I did leave a comment on windows marketplace for your application, did you see that?
I already installed the new release but I found an error that crash the application. If I push the button "calcular" after putting the password, the program shows an error and close because no column or line is selected.
regards
Click to expand...
Click to collapse
It's Solved. You can install the last cab from here or wait from marketplace. If you wait for marketplace, it will take about 1 week or more because one other version is on it's way so just after that being approved i can send this one.
I saw now your comment, however i would ask you to next time please mail me or send me here the bugs because i see it more often here.
Really thanks for the help!
And i hope you liked the new instructions and matriz card input (it will be easier to input in the next marketplace version)
herpez said:
It's Solved. You can install the last cab from here or wait from marketplace. If you wait for marketplace, it will take about 1 week or more because one other version is on it's way so just after that being approved i can send this one.
I saw now your comment, however i would ask you to next time please mail me or send me here the bugs because i see it more often here.
Really thanks for the help!
And i hope you liked the new instructions and matriz card input (it will be easier to input in the next marketplace version)
Click to expand...
Click to collapse
Nice! Good Program!!!
Obrigado (Thanks!)
rhcpu2 said:
Nice! Good Program!!!
Obrigado (Thanks!)
Click to expand...
Click to collapse
You're welcome!
Hope you like it.
Marketplace has one version with no bugs so far.
Thanks
Congratulations for this great app. Can you also make the same app, but for Montepio? Is it only a matter of changing the logo?
Obrigado desde já. (Thanks in advance)
bgcngm said:
Congratulations for this great app. Can you also make the same app, but for Montepio? Is it only a matter of changing the logo?
Obrigado desde já. (Thanks in advance)
Click to expand...
Click to collapse
Hi. Im working or expand it to BCP, Montepio and so on, however, it takes a bit of time and by now i dont have it. Really Sorry.
I dont really know how does the matriz from montepio works, can you tell me please?
Obrigado
Related
Can anyone tell me if there is a way to default Pocket Outlook to display First Name, Last Name.
I have set all my contact on the PC to First, Last, but if I create a new contact on the XDA or I edit the name of any contact on the XDA it reverts to Last, First.
I have tried this on a Dell Axim X5 (PPC2003) and this seems to be the same.
Thanks
Matt
Yep got that same prob!! But I got around it by saving the contact to SIM then copy to phone and from there add any additional details.
Hope this helps.
Max
If anyone has an easy answer to this one, I'd be very pleased.
I've been fighting with this one for months.
max me up said:
Yep got that same prob!! But I got around it by saving the contact to SIM then copy to phone and from there add any additional details.
Hope this helps.
Max
Click to expand...
Click to collapse
This will work but as soon as you edit any part of the name in the address book it reverts to Last, First again and you have to repeat the process again!
When you sysn to Outlook 2002/XP go to contact select the contact name you want to edit their is an option called "File as" which is drop down menu. it will display the First AND Last Name . Save AND Close repeat step for other contacts.
Hope this helps :wink:
This doesn't help when you add a new contact on the XDA, it files it LAST, FIRST, until you get a chance to sync the XDA and change it back in Outlook.
Can anyone tell me if there is a way to default Pocket Outlook to display First Name, Last Name.
Click to expand...
Click to collapse
Oh boy, my favorite Pocket Outlook annoyance, one of many, since I use the GroupWise 6.5 client with IntelliSync to synchronize. What can I say: masochism, a way of life?
Anyway, I solved it by cutting the last name and appending that to the first name for all (250-300 ) my contacts. Only takes one night and is a real good practise for getting used to the touchscreen.
I have searched on a lot of forums, and only 1 tip can be read time after time: get a different PIM, even if you don't have the issue we're discussing right now.
Really, why Microsoft didn't put an option to change the View in there will probably never cease to amaze me :shock:
xda-rocks said:
This doesn't help when you add a new contact on the XDA, it files it LAST, FIRST, until you get a chance to sync the XDA and change it back in Outlook.
Click to expand...
Click to collapse
I understand your point but it all depends how often you sysnc your XDA and use Outlook 2000/XP as you PIM . Well it's one soultion..... :?
X-Ray said:
Can anyone tell me if there is a way to default Pocket Outlook to display First Name, Last Name.
Click to expand...
Click to collapse
Anyway, I solved it by cutting the last name and appending that to the first name for all (250-300 ) my contacts. Only takes one night and is a real good practise for getting used to the touchscreen.
:shock:
Click to expand...
Click to collapse
The best solution for me is to change all contacts to First Name only containing all full name, but as I am a lazy software engineer I wrote some software to do it. I also wrote it to change any (UK) mobile number it finds to +44 at the start so the caller ID appears when then send sms.
I don't have an ftp site so if anyone wants to e-mail me I can send them a copy - runs on the PC with Office 2000 or greater installed and you can preview what changes it will do before altering anything.
Usual disclaimer applies - Don't blame me and make a back up of your contacts in Outlook before you start.
Files are available at the following http download site:
http://www31.brinkster.com/pissterons/onameconverter/onameconverter.zip
Please cut and paste the link into a new browser window.
Let me know if anyone has any problems.
Matt
I can not download the file.. I'm getting this msg:
HTTP1.1 STATUS 403 Remote Access to this object forbidden This file cannot be directly accessed from a remote site, but must be linked through the Brinkster Member's site.
So, please advice,,,
Best regards,,,
If you cut the address and paste it into the address bar of a new explorer (or other browser) window it should work. :wink: If not mail me and I will e-mail you.
Can you mailit to me as well? I too couldnot access that website.
me too.. 8)
could u pls mail it to me too. thanks
Name Converter Software
Converter First Name Last Name entries to All First Name in Outlook on the PC.
Thanks 8)
wtf does
"A Man said to the Universe, Sir I Exist..
But this never created in him the Sense of obligation.."
mean ?
something along the lines of.
"This man felt compelled to create an irritating signature and succeeded"
:?
Hmmmm...
Mr Web.. Hey up Matey.. You Again.. !!!
Thanks for the CD's Which I haven't recive (Yet.. ).
By The Way.. Have you found Something about the eVC (and/or) eVB.. ??
And the 22Way Conn. ??
And for the Signature.. :roll: No Comments.. !!
Hey up Matt..
Guess You've "left" That Same Frame that Reminds of the Something we used to Call "TimeBomb" Expiry.. !!!
P.S.
I Can't Wait for Alan anymore..
Just Die'ng to Get my XDA..
T H A N X Matt..
_________________
Hi there,
I was looking around for an app to let you choose different ringtones for contacts on a priority basis.
I found something similar by v3patel, but it didn't allow me to prioritise, e.g. a 'personal' ringtone to take precedence over a 'business' ringrone when a contact is in both categories.
....so I made this app. I hope that it might be useful for others too, do as ever let me know of any bug reports or feature requests.
EDIT: If you were testing v0.1, please upgrade to v0.2 for an important bugfix!
Download Link Here - v0.2
This app requires the .net compact framework on your device. For WM6 this comes pre-installed in ROM, others need to download here
Carlos
=====
Instructions
============
1. Choose a category and a ringtone.
2. Click 'Add to list' to add it to the priority list.
3. Repeat steps 1 and 2 until you've chosen all your desired categories and ringtones.
4. Use the Up and Down arrow buttons to order your list into priority; categories at the top take precedence over categories below them.
5. Click 'Set Now' to make the changes.
Troubleshooting
===============
The app assumes that the ringtones are stored in \Windows\Rings. If this is NOT the case, go to the menu and choose 'Set Folder' to point it to a different location. This setting is currently NOT stored (sorry!) but will be in a future release if I get time!
Further help / support
======================
Please go to www.fatattitude.com/software or post in this thread
cool, will try
Good work....
Hey, great work and a good idea...
will try it also (it's too late to tell someone to call me )
Maybe it could be possible to listen to the ringtones before adding in a future release ? Just as input for you....
what does it mean "choice currently not stored" ? Will the changes be made to the categories, but when you restart your app, you can't see it anymore ? I think it is this way, but i'm not really sure....
Anyway, i like it !
Cheers, Peter
petervbeck said:
what does it mean "choice currently not stored" ?
Click to expand...
Click to collapse
No, it just means that your preferences aren't stored, including where you tell the app to look for the ringtones. Your contacts will be set to the new ringtones you ask for and will stay this way, even after a reset.
nice work. will try today. thx
i am using trinity wm6 bape rom. and got a platformnotsupport exception.
h0228631 said:
i am using trinity wm6 bape rom. and got a platformnotsupport exception.
Click to expand...
Click to collapse
Sorry, I forget to mention that the app requires the .net compact framework 2.0 to be installed, perhaps this is giving you the error. Download link added to first post.
C
Hi, for anyone experiencing problems with ringtones not playing in v0.1, please upgrade to v0.2 for an important bugfix... ...first post updated!
Do please keep feedback & suggestions coming - nearly 200 downloads and no comments on the program!
C
carlosp_uk said:
Sorry, I forget to mention that the app requires the .net compact framework 2.0 to be installed, perhaps this is giving you the error. Download link added to first post.
C
Click to expand...
Click to collapse
wm6 should have 2.0 by default. at least on official rom. I believe the bape rom should also have it. Anyway, I will try 2.0 out tonite and report later.
has anyone tried this on a WM Treo?
bnycastro said:
has anyone tried this on a WM Treo?
Click to expand...
Click to collapse
No, please try it out and let us know if possible!
If you just want to test the app, you could always add a contact to a new category, for example, "Test". Then just run the app and assign all contacts in category "Test" to a ringtone. If the contact you changed is successfully updated then the program works for you! If not, no harm done.
Do let us know if you have success.
h0228631 said:
wm6 should have 2.0 by default. at least on official rom. I believe the bape rom should also have it. Anyway, I will try 2.0 out tonite and report later.
Click to expand...
Click to collapse
still not work on my wm6 trinity.
h0228631 said:
still not work on my wm6 trinity.
Click to expand...
Click to collapse
It is perhaps to do with the recorded version number of your ROM and the settings for my CAB file.
Can you post the exact error message that you are receiving, along with when you are receiving it? Then I can try and help you.
C
It didn't work on my Prophet running WM6.
The program itself works, and assigns the correct ringtone to each category, but when a person calls, the default ringtone that is set in sounds & notification is played instead of the category ringtone assigned.
In each contact's information, the correct ringtone for that category is assigned. But it doesn't play that tone when that person calls.
When I open someone's contact detail and tap the ringtone, the left softkey changes to "play". When I tap that, there's no sound.
However, if I assign that same ringtone manually in the contact details, it plays when I tap "Play"
Hope you understand what I mean...
Putra said:
The program itself works, and assigns the correct ringtone to each category, but when a person calls, the default ringtone that is set in sounds & notification is played instead of the category ringtone assigned.
Click to expand...
Click to collapse
Thank you - if only all bug reports were that detailed!
Can you confirm that you're running v0.2 of the program? There was a bug in v0.1 that caused this behaviour. (see first post for download link)
C
Hi carlosp,
Yes, v0.2 works perfectly. Thanx for this app! It really saves us the chore of having to assign a ringtone for each contact individually.
Now, I'm trying to decide if I still need innesoft address book...
Putra said:
Yes, v0.2 works perfectly. Thanx for this app! It really saves us the chore of having to assign a ringtone for each contact individually.
Click to expand...
Click to collapse
No problem - let me know if you have any bug reports or more feature requests. I was thinking perhaps add an 'Any Category' option in the drop down, so that it's possible to unassign ringtones from all contacts in order to clear everything off and start again.
Hi,
something strange happened: I flashed my prophet to Prophet Touch VII ROM (I was on v6 before), and the Tone Manager didn't work.
Ran the program as usual, but after that I got the same problem as described in my post above. The ringtones are assigned to each contact but doesn't play during the incoming call. Exactly the same prob as in v01.
Strange....??? it was working before on my previous ROM....
A request: the folder is not saved but always reverts back to \windows\rings at each opening of the program. I have mine in the SD card... can you make the prog save the SET FOLDER?
Thanx...
EDIT: I re-downloaded the program from your website and re-installed it, and it works! Very strange, maybe the file in my PC got corrupted or something...
Tone Manager not working on Cingular 3125 (WM 5)
Hi Carlos,
I have installed .net framework v2.0 on my Cingular 3125 and after I start Tone Manager, I get the following error:
Error
An unexpected error has occurred in Tone Manager.exe. Select Quit then restart this program, or select Details for more information.
After clicking on details, I get:
Error
Tone Manager.exe
NotSupportedException
at
MicrosoftAGL.Common.MISC.H
andleAr()
at
System.Windows.FOrms.Control.
_InitInstance()
at
System.Windows.Forms.Control.
.ctor()
at
System.Windows.Forms.Button..
ctor()
at
Tone_Manager.Form1.InitializeC
omponent()
at Tone_Manger.Form1..ctor()
at
System.Reflection.RuntimeConst
ructorInfo.InternalInvoke()
at
System.Reflection.RuntimeConst
ructorInfo.Invoke()
at
System.Reflection.ConstructorIn
fo.Invoke()
at
System.Activator.CreateInstance
()
at
MyForms.Creat_Instance_()
at MyForms.get_Form1()
at Tone_Manager.Form1.Main()
I've tried V3Patels VipPimRingTone, and I get somewhat similar error.
Any ideas?
Thanks,
Joe
i think this is like RINGO but ringo is better coz u can classify also which sms tone u like for individual or group.
Hi there,
This software is an Antitheft and you can use it to track your device when it was lost or stolen. It works catching a formated SMS sent from any phone and then send useful informations back.
You can use it to others objectives, like keep your eye in your child. Use your imagination!
If the thief change your SIM card, you will receive a SMS alerting you and you still can track your device. All you need to do is set an emergency cel number.
RemoteTracker can be added to third part custom ROMs. But, with a hard reset all configurations was lost. Now, RTRegCreate tool can create a configuration file using your PC. ROM cookers can use this DLL to make RT hard reset safe!
I need to learn VisualStudio 2008 and develop to Windows Mobile for professional purposes. I choose to make this projet because thought it might be fun
My Glofish X800 has Panot (from eten-users.eu) custom ROM with WM6.1 and native .NET 3.5, but you can download this .NET version if needed here: http://www.microsoft.com/Downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
The installer CAB file and source code of RemoteTracker can be downloaded here:
http://remotetracker.sourceforge.net
This version answer the commands below:
rt#help - send this list of commands;
rt#ehelp - send this list of commands by e-mail;
rt#cb#<some_tel_number> - turn on the Phone and call the number passed as parameter;
rt#gp#<some_cel_number> - try to get GPS coordinates and send back to cel number passed as parameter.
rt#egp#<some_e-mail_account> - try to get GPS coordinates and send back to e-mail passed as parameter.
rt#pb#<some_cel_number> - Use them to receive your contacts stored in SIM card back. If you do not take the phone back, at least the contacts will be saved.
rt#epb#<some_e-mail_account> - Same as pb, but the message goes by e-mail.
rt#elt#<some_e-mail_account> - This command will start GPS, Log the path about 5-6 minutes and send the KMZ file by e-mail. This file can be opened with Google Earth. Very cool.
rt#go#<some_cel_number> - get 'settings/owner' informations.
rt#ego#<some_e-mail_account> - Same as go, but the message goes by e-mail.
rt#rst - softreset device.
rt#dkz - delete all kmz files.
rt#dsc - delete all contacts in SIM card.
rt#eganfl - Send, by e-mail, a list of all incoming and outgoing calls if you have VITO audio notes installed.
rt#eganf - Send, by e-mail, all incoming and outgoing calls records if you have VITO audio notes installed.
rt#findme - Same as 'gp' command, but ask you if you want to answer the command.
rt#alarm - Just play a sound. Useful when you don't remember where the device is, but you know it's your home.
rt#gi - Send informations about your phone: IMSI and IMEI.
rt#egi - Same as 'gi' but the answer goes by e-mail.
rt#msg - Send a message to be displayed on your device.
The main screen has a tab with help.
I did this project to be multi-language. In this version there is Portuguese (my mother language), English (sorry about it, my english is very bad), Dutch (thanks to Cybermoose, from etenusers) and Spanish (thanks to Popy from etenusers). If you want to make your own translate, I can tell how. Very simple.
If you decide to try RemoteTracker, I would like to read reviews, comments and suggestions. Remember this is a beta version and may contain bugs. Use at your own risk and with caution.
Please see ChangeLog.txt to see the improvements.
For those of you who are having the problem with the help file,
with some strange certificate errors and PIE opening when you start RTconfig, the problem lies with having the default program that opens html set to something besides PIE (Opera 9.5, perhaps)
To fix this, use schap's Advanced Config tool to set .htm and .html files to be opened by:
Code: iexplore.exe file: %1
Originally Posted by xd1936. Thank you very much!!!
Keep RemoteTracker up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here: http://www.modaco.com/content/apptodate/267096/download-apptodate-supported-applications/
After install AppToDate, please download RemoteTracker and run RTConfig or softreset your device to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website: http://remotetracker.sourceforge.net
Cheers,
Joubert Vasconcelos
my apologies if i'm blowing up a bubble here.. but doesn't TrackMe do the EXACT same thing?
nir36 said:
my apologies if i'm blowing up a bubble here.. but isn't TrackMe does the EXACT same thing?
Click to expand...
Click to collapse
I didn't know this software. Very good I think, I'll try later. But I suspect the objectives are different. RemoteTracker works only in silent mode to help you find your device if you loose it.
There is only one user interface to configure few parameters. After that you don't need to use it any more.
All functions are activated by SMS (remotely) and the answers will be by SMS or e-mail. For example you can use your wife's phone to send SMS to your lost phone and then receive GPS coordinates to find it.
If you want to compare RemoteTracker with other software, it's more similar to Mobile Justice, but with more features.
This is first goal of RemoteTracker. The second is help you to retrieve your personal data back. It's not totaly done yet. There is a work in progress.
Hope this answer your question
I think this is fantastic! Great idea! Do you think you can incorperate more CDMA-friendly, not-solely-sim-card features? I'm downloading now
I don't have a CDMA device But I think I can search for informations and then code, but without tests.
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
shantzg001 said:
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
Click to expand...
Click to collapse
I agree and thanks. I did not like the similar software in the market. And I need to learn VS .net, so I decide to make one by my self to learn and also for fun.
S.V.I said:
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
Click to expand...
Click to collapse
One thing I'm thinking is how to reinstall RT automaticaly after a hard reset. May be using external cards, but the autorun feature only works when card in inserted.
Built into the ROM is possible, but only ROM cookers or manufactures can do it.
I think its early to think about it. RT have to me more tested.
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
nir36 said:
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
Click to expand...
Click to collapse
All WIMP does is send an SMS back with the current GPS co-ordinates, very useful but severely lacking compared to what the OP is trying to do. That said it is native PPC code with no need for .NET.
Surely we should commend anyone trying to write alternatives as without that attitude we would all be using Windows with MS Office and browsing using IE. Possibly not the best analogy but it will do.
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
i wasn't complaining. i think it's wonderful people are trying to develope new software. i was just giving reference.
phamhien said:
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
Click to expand...
Click to collapse
When you run RT for the first time, the IMSI of your SIM card is stored. After a new 'boot' this IMSI is verified again. If the new IMSI does not match with the old, you will receive a SMS alerting you. This message has the new number. You must input an emercency mobile number in config tab. This number, of course, must be a mobile number diferent of yours (your wifes, mother, son, or so).
hoolahoous said:
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
Click to expand...
Click to collapse
I have no idea how to get this information! But it's a good idead and I'll search this information.
Greaattttttt !!!
Can help for french translation, if you want to.
naboleo said:
Greaattttttt !!!
Can help for french translation, if you want to.
Click to expand...
Click to collapse
Of course I do! Thank you very much!
Very simple: copy and rename english.xml and english.htm to french.xml and french.html.
Edit both files and just translate ignoring the words between < and > characters (those are "commands").
Edit language.xml file and insert the lines below before </languages> (last line):
<language>
<code>4</code>
<name>Français</name>
<file>french.xml</file>
<help>french.html</help>
</language>
Today I was roaming around some blogs and stumbled upon an article with some tips to protect your "smartphone", they talked about a software called mSafe, I even downloaded it for test.
Anyway, it does mostly what you want to develop. The site is http://www.motionapps.com. Their apps are intended for Treos but mSafe states that it's compatible with WM5.
Just for your reference.
joubertvasc said:
I have no idea how to get this information! But it's a good idead and I'll search this information.
Click to expand...
Click to collapse
Well... I'm not familiar with windows mobile programming but I'm a SIM Card programmer. I don't know if you can access STK commands (commands to the sim card) via the Windows Mobile API's but, if you can, there is a function ("proactive command" using the specific SIM terms) called "PROVIDE LOCAL INFORMATION" that gives you exactly this information (and more)...
Hope it helps...
Want to add custom weather?
Feature List (Both Versions)
Easy management of your current cities including the ability to reorder them
Simple interfaces for adding cities in the US and WorldWide.
Support for the backing up and restoring of your current cities to a storage card
Cooked-In support that allows chefs to allow for custom setup as part of the install process
Support for auto-loading of backed up cities upon clean install (when in Cooked-In Mode)
1.3:
Support for adding US cities using just a zip code
Complete control over the Countries list
2.1:
Re-enabled using Zip Codes in the US
Fixed non-US Countries not working
2.2:
No longer need to shut down TF3D to edit the weather
So, we are at a crossroads. The older version of Touch Flo's database is not compatible with the Rhodium version that XBMod has released. So I'm now maintaining 2 versions of Weather Master.
HTC Weather Master 1.3
This is probably the last version that supports the old style database (unless there is some major problem with it). This version has been adjusted to detect if you are trying to use it with a newer database file and will stop you. This version was tested on NATF's 4.4.
Click to Download HTCWeatherMaster1.3.CAB
Click to Download HTCWeatherMaster-1.3-Source.zip
Known Bugs:
Doesn't support Storage Cards not named "Storage Card"
HTC Weather Master 2.2 Rhodium
This is design to support the new database structure. It will also shut down TF3D before editing the database to avoid file locking issues. This version was tested on EnergyROM 41409.
Click to Download HTCWeatherMasterRhodium2.2.CAB
Known Bugs:
Doesn't support Storage Cards not named "Storage Card"
Sometimes selecting a city or new state doesn't clear the zip code box
NOTE: In all cases, make sure you disable TF3D before attempting to add weather.
Da Pitch...
Hey.. you like my stuff? Please donate to support my independent film projects.
And please, watch my movies..
http://www.evanscitystories.com
(Rated Mature for Language and Gore)
BE SURE TO COMMENT AS I LOVE FEEDBACK!
Hints / Tips / Bugs
Tips
Tap and Hold on any of the following lists to bring up a context menu that allows you to delete content.
Awesome job with this man! You can tell a lot of effort went into this! Thanks for this
Yeah, took him a while to work out the bug on the Sprint TP, but he finally got it.
wahoo!!! that really a good job man
could it be possible to add the feature of customizing the touchflo3d weather server... ? (because the default one, accuweather really sucks...)
That should be doable.
it would be really awesome !!!!
you will be my god JoeWilcox, if you can do it
it working perfectly on my HD
there is just the display that doesn't fit the full screen
Method 1: Cooked-In Mode....
EXEC:\Windows\HTCWeatherMaster.exe -cooked
Click to expand...
Click to collapse
nice idea, its the first time i've seen a thing like that
Thx you!
Ola,
Thank you for this app!!!!
I got the Data.SQlite error.... database and disk is full ??
Gr,
cool thanks a lot
Yes if you can change the weather source will be wonderfull
SatScan said:
Ola,
Thank you for this app!!!!
I got the Data.SQlite error.... database and disk is full ??
Gr,
Click to expand...
Click to collapse
Hmm, someone else reported that but reported it fixed. Did you try a reboot and make sure you're not on the weather tab.
Thank you for this app, from Argentina.
2 things to mention: when you add a city it goes to the end of the list and its hard to guess it first time. And second when I add a city that isnt in the list the 5 day forecast doesnt work.
Hi,
I don't know where is the problem but have a look at the screens
I hace 6 cities set up, and I only have this problem with montreal. The five others are, annaba in algeria, and then 3 cities in france and those one are displayed correctly.... Any ideas ?
Joe
I am getting ready to try this in my ROM. Have you had any conflicts with connection setup and this both running after first boot? If not Ill just give it a shot lol. Ill report back after some testing
JoeWilcox said:
Hmm, someone else reported that but reported it fixed. Did you try a reboot and make sure you're not on the weather tab.
Click to expand...
Click to collapse
Yeah, that was the same errors I was receiving from version 1.3b. Versions 1.1b and 1.2b just gave me the SQL error, version 1.3b gave me the disk full error right after the SQL error as I reported here.
smotrs said:
Yeah, that was the same errors I was receiving from version 1.3b. Versions 1.1b and 1.2b just gave me the SQL error, version 1.3b gave me the disk full error right after the SQL error as I reported here.
Click to expand...
Click to collapse
But it was worked out in 1.0.b4 right?
I hace 6 cities set up, and I only have this problem with montreal. The five others are, annaba in algeria, and then 3 cities in france and those one are displayed correctly.... Any ideas ?
Click to expand...
Click to collapse
For some reason, the weather site isn't returning valid information for that city. Can you post the accuweather code WM generated for the city so I can verify it on the site.
aruppenthal said:
Joe
I am getting ready to try this in my ROM. Have you had any conflicts with connection setup and this both running after first boot? If not Ill just give it a shot lol. Ill report back after some testing
Click to expand...
Click to collapse
Hmm... that's an interesting question. My rom doesn't run the connection setup so I never tested it. The should play nice but if they don't, I'll see if I can think of a way to make them play nice. I'm open to suggestions.
JoeWilcox;
Nice job.. downloading.. thanks for this app..
#offtopic
your black theme is a tsk file? Can you upload it? I like this 3D aspect on top and down bars
Sorry for the offtopic and my English
New version now available.
It is now freeware for windows mobile.
Check their website for details and download: http://www.lonelycatgames.com/?app=profimail
Or, just install the attached cab.
Thanks...i love slick messenger from lonely cat..will try this and see how it is...
Hello,
Use ProfiMail for years, is the best email program, reliable, fast, and very effective.
Too bad another developer abandoned the Windows Mobile operating system that I like and I will continue using until my two mobile devices continue to function perfectly.
This developer is now offering a free program that until recently cost nearly $ 25. As indicated in its forum, keep some updates in 2011, after cease development and support.
Regards,
screenshots and changelog ?
can u put some screenshots in your thread ?
also write changelog dear .... thank u
aliwmhd2 said:
can u put some screenshots in your thread ?
also write changelog dear .... thank u
Click to expand...
Click to collapse
Hello,
The first comment indicated the developer link (http://www.lonelycatgames.com/?app=profimail) where there are all kinds of information and screens and a link to download this program free for Windows Mobile (all versions). This program is translated into many languages.
Regards,
hmmmmm even though site says freeware app says demo when starting up
thanks. really free :
http://www.lonelycatgames.com/?app=profimail&page=download&platform=windowsmobile
but sadly no interaction with iphonetoday...
I installed the application and the information I have is the demo, someone I can explain.
Thanks
well... I installed the version from the website. When I go in the "About" section, I have
ProfiMail 3.40
Build date: Apr. 29 2011
nothing says it's a demo.
If I go on the "update version" tab, it's the very last version too.
where do you see you're using a demo ?
maybe uninstall profimail totally (exporting connexions before lol), remove residual files manually and reinstall profimail
upon installing the cab, it says demo version and asks you to accept or decline. just click on accept and let it install. as corwins said, it is a full version and not demo if you check the "about" tab.
Corwin9S said:
well... I installed the version from the website. When I go in the "About" section, I have
ProfiMail 3.40
Build date: Apr. 29 2011
nothing says it's a demo.
If I go on the "update version" tab, it's the very last version too.
where do you see you're using a demo ?
maybe uninstall profimail totally (exporting connexions before lol), remove residual files manually and reinstall profimail
Click to expand...
Click to collapse
joshzzz2001 said:
upon installing the cab, it says demo version and asks you to accept or decline. just click on accept and let it install. as corwins said, it is a full version and not demo if you check the "about" tab.
Click to expand...
Click to collapse
Ok I understood. Thank you for the explanations.
New version, 3.45, now available. Updated the cab in post #1.
thanks !
any idea of doing this with iphone today ?
Corwin9S said:
thanks !
any idea of doing this with iphone today ?
Click to expand...
Click to collapse
sorry, no idea. i don't use iphone today. i use it as a quicklink in cht.
Japanese Character Encoding cant use
Shift-JIS & EUC character endocding cant use
Thanks for the heads up.
I got excited when I saw this as it looks a great program. However having tried it for me its got a fundamental flaw in that it cannot operate with its own address book, it relies on your windows contacts. I don't want to have to clog up my (in effect) phone book with everyone I know email addresses too. I don't use outlook either so don't sync.
WM6.5 can be troublesome with a lot of programs due to the bottom menu. Found an earlier version of Qmail works but current favourite is Npopuk, nowhere near as advanced as Profimail but address book is simple text file that I can create from my desktop client easily.