Problem Flashing from WM to WM6.1 - JAMin, XDA Neo, S200 ROM Development

first of all im new to wm
Qtek S200
running on wm5
i have windows 7 32-bit
i did read many things
please i know there is alot of how to
but i need somone to guide me personaly
like msn or skype chat please
and i dont know wich rom to get or from where
i already downloaded a 6.1 rom and tried so many times
1:had activsync issu (solved)
2:about the spl there is SPL 2.200.001 on my device i read this on the boot screen
wating for a rply
that's my main issu
YYYYYYYYYYY DOWN HERE YYYYYYYYYYY

about the RUU always giving me error
program has stoped and i have to close it

is there is anyway to flash from SD card ?

badboyilprimo said:
first of all im new to wm
Qtek S200
running on wm5
i have windows 7 32-bit
i did read many things
please i know there is alot of how to
but i need somone to guide me personaly
like msn or skype chat please
and i dont know wich rom to get or from where
i already downloaded a 6.1 rom and tried so many times
1:had activsync issu (solved)
2:about the spl there is SPL 2.200.001 on my device i read this on the boot screen
wating for a rply
that's my main issu
YYYYYYYYYYY DOWN HERE YYYYYYYYYYY
Click to expand...
Click to collapse
You have a G4 device, so the picture send by you is a tipycal problem when you don't check Vista/W7 option. Read all posts from Prophet_Upgrade tool, your problem was discused some time ago there... Prophet device can't be upgraded from sd card, it need special SPL to support this. Please read until start a new thread!!!!

i used xp and i flashed with 2 kinds of rom's on urs and other one i have g4 device
but now im stuck at rgb screeen what shud i do

Related

cannot install imate jamin original rom after installing evo8en - help

hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .

Help Please......!!! P3400 (old Gene) stuck at bootloader...!!!

--------------------------------------------------------------------------------
hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
krazy_about_technology said:
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
Click to expand...
Click to collapse
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
hksin1988 said:
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
Click to expand...
Click to collapse
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
npiyanut said:
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
Click to expand...
Click to collapse
hey i tried upgrading to original wm6 but it always shows error at 2%, "Invalid Vendor ID" n my phone gets restart.
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
krazy_about_technology said:
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Click to expand...
Click to collapse
I tried upgrading to stock WM5 Rom given here
http://forum.xda-developers.com/showthread.php?t=382063
but while ungrading it is showing Invalid Vendor ID, and my phone is getting restart ...
so ,,,,,, is ther anyway to hspl my phone or something ???
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
hksin1988 said:
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
Click to expand...
Click to collapse
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
rakesh_4utoo said:
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
Click to expand...
Click to collapse
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
How to remove Smart Mobility Boot Screen
Hey Guys please also tell me that how can i remove this Smart Mobility Boot Screen and revert back to Old HTC logo White screen...
any solution ???
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
ramersonw said:
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
Click to expand...
Click to collapse
i hv already given this a try.....but ended up getting error all the time.....
i tried Mtty i dont know how many times but in last the error comes
and one more thing.....tht unbrick solution is for P3400i and newer GENEs (HT 8XX), even my phone's serial no starts frm HT8XXX, although it is old version.....ONPL is 1.07.0.0 ...
while in newer genes it is 1.10.0.0 n more
so this solution wont apply on mine...
BUT Still i gave it a try.......not workin for me...
hksin1988 said:
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
Click to expand...
Click to collapse
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
rakesh_4utoo said:
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
Click to expand...
Click to collapse
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
hksin1988 said:
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
Click to expand...
Click to collapse
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
rakesh_4utoo said:
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
Click to expand...
Click to collapse
yea dear...think something................i m very thankful to u....tht u r takin interest in my problem.....
Finally Gene is alive......thanks to HTC service centre..
Finally i gave my phone to HTC service centre...and...ther made my gene alive once again...
Now m very happy now...!!!
i would like to thank every XDA forum member for helping me out and givin me response.
i mistakenly flashed wm6.1 stock rom which was for HTC P3400i and newer P3400, so my phone got stuck at bootloader.
i tried almost each n every solution avaible here at XDA forum , but nothing helped me out.
as each time it was showing me error in flashing back to original ROM.
finally i gave up and decided to give my phone to HTC service centre since it was under warrenty...
so...now my phone is OK....it has original wm5 once again.,,,
and i will flash to Fusion 9.0 rom tonight.....

want to upgrade imate jamin to windows 6.1

hay ..anyone can help upgrading mine jamin to windows mobile 6.1 ....i cant upgrade it ...i have tried the black version and Blue_Elves_v5_WM6.1..but both says..my pda is not connected to my computer..but ..infact it is....i dont know whats the matter...is the rom not fit for my pda or ...something more i need to download ...so can anyone helpme ...if i need new rom to downlaod ...can anyone provide me the link of it...
Have you read the upgrade guide by Animelover carefully? Here it is:
Current upgrade guide for the most ROMs
After reading and understanding it carefully, you should ponder over this thread by dioxda2:
FLASHING TOOL For all nk.nbf (WM6.1), 3 color bootup? SOLUTIONS read post 1.........
Now Download LazyTool, it includes CloudFa's ROM
Im pretty sure youll have no problem after following the above instructions
thnx dude....
it relly worked for my jamin ....but do you know how long is the batterylife of jamin ...coz it donest last more than 12 hrs...after being full charged and not even touched at all..whats the main problem that you think????i have recently changed newsamsung 1200mA battery

NEW windows 6.5 for GENE

Hi Guys,
I tried searching around however i could not see any new ROMS for Gene for windows 6.5. I noticed that all the other phones like Blackstone and Titan have lots of new ROM for windows 6.5 with lot of other verison. i noticed their version have reached upto to v8 for win 6.5.
If we have any could you please pass it on to me? something like the Honeycomb? Please plase!!
go to following link...
http://forum.xda-developers.com/showthread.php?t=487284
U will got 6.5. which give u imaging experience.
nipun_cse said:
go to following link...
http://forum.xda-developers.com/showthread.php?t=487284
U will got 6.5. which give u imaging experience.
Click to expand...
Click to collapse
Thanks for the Prompt reply nipun but that seems like for the New Gene and sadly i have an Old Gene
I think ankit already doing it for old gene. if not, he will start doing vary shortly. i believed it from my sole...
@salim1001
hi
pls look with ur eyes wide open ankit has made 6.5 for old and new gene just spend some time u will see the link in ankits thread as i also have old gene and have used the same
PLS PLS DONT WAST A THREAD first search then ask u will get wat u want
salim1001 said:
Thanks for the Prompt reply nipun but that seems like for the New Gene and sadly i have an Old Gene
Click to expand...
Click to collapse
Other phones are having it faster because the quoted ones by you have bigger stomach (ROM memory) so its a bit simpler to cook this huge giant OS for them. For GENE, the cutting and trimming takes a lot of time. Be thankful that its even running on gene because of developers like Ankit here, otherwise you would never be able to see wm 6.5 on gene.
hi i need to ask a question
i have htc p3400i new gene i softspl it and my
onbl says 1.17.000
spl 1.17.oref
gsm 02.79.90
os 1.17.0.0
i m using custom wm6.5 build 23017
i have 2 question ??
1) can i flash a new rom on this one with jst enterin the bootloader mode by pressing the camera and power button without doin soft spl procedure again and using RUU utility and flashing new build????
can i flash any number of roms without doin hard or soft spl again
2) can u post link of any new build ROM wm6.5 for p3400i???
plz help i am new to all this..............
drashish36 said:
hi i need to ask a question
i have htc p3400i new gene i softspl it and my
onbl says 1.17.000
spl 1.17.oref
gsm 02.79.90
os 1.17.0.0
Click to expand...
Click to collapse
Yes you can flash any of the ROMs from this forum.
No offence, but do you honestly think that this is the right thread to ask the question?
Links:
http://forum.xda-developers.com/showthread.php?t=506763
http://forum.xda-developers.com/showthread.php?t=555251
http://forum.xda-developers.com/showthread.php?t=549076
http://forum.xda-developers.com/showthread.php?t=543758
Just a few, take your pick, there are even more...
Thank you,
Thread closure requested.
@everyone:
Since I am yet to get my device, I am still browsing through this forum, so any wasted thread will be immediately asked for closure.

from wm5 to wm6 Faild 6 times

i tired to flash to wm6 rom's never worked every thing go smoth then nothing appears just the rgb screen then i go back again to NVID
so how exactly it goes
i mean how to know wich rom of WM6 would work on my device
i have g4
please help
please read http://forum.xda-developers.com/showthread.php?t=377545
three are explanations for procedure for flashing to wm6. first thing is hardspl then flash to winmo 6.
sory for being stupid but it went smooth and im ofire
thanks hell of a great fourm
now im happy Qtek S200 Owner with WM 6.5 Proooooo

Categories

Resources