Anyone knows where to get a replacement? I think it's what it's called. It's the small plastic cap on top of the phone over the cable socket. Lost mine at some point...
There is probably no replacement for this. Either live with it or replace the whole housing.
http://www.dealextreme.com/details.dx/sku.37131
New Case for Cheap!
stgeorge88 said:
Anyone knows where to get a replacement? I think it's what it's called. It's the small plastic cap on top of the phone over the cable socket. Lost mine at some point...
Click to expand...
Click to collapse
Same situation here.. your best bet is this....
http://www.dealextreme.com/details.dx/sku.37130
Pricy~
Thanks for you all. I'll keep looking and keep you guys posted
Sent from my X10i using XDA App
Why would you replace an entire case for a lost dust cap?
I'd be very happy if that thing fell off. Makes it impossible to plug charger in in the dark or with one hand!
Sent from my X10i using XDA App
Punnisher_42 said:
I'd be very happy if that thing fell off. Makes it impossible to plug charger in in the dark or with one hand!
Sent from my X10i using XDA App
Click to expand...
Click to collapse
You mean they last more that two days then It is so much easier to connect the cable without it - shame there isn't a thing to fill the holes it leaves behind though (aside from the USB one that is).
Go to a site called "netimes.com" and type "micro usb" into there search box .I.ve ordered a pair already, will let you know what they're like when they arrive.
Fahrvergnugen said:
http://www.dealextreme.com/details.dx/sku.37131
New Case for Cheap!
Click to expand...
Click to collapse
The black casing does not show the dust cap, whereas the white casing does...
Yup, true genius engineering design went into that usb connector. (Same guy tested the in-call volume in a sound proof room).
What?!?! Put the connector at the bottom and be like everyone else?? No X10 owner would want to put the device into a docking stand. That would just be foolish.
My previous phone, an HTC Cruise, has the connection at the bottom with no cover. In more than a year of being in my shirt pocket on a daily basis the mini-usb never got any dust in it. At least not enough to ever prevent a good usb connection.
Related
I broke the little flap off the top of my X10 (the bit that covers the USB port) while moving house the other week and was wondering if anyone knew where I could get one (Black)?
I know its not needed and has very little use but it looks a bit weird without it :/
no idea why sony didn't make the USB flush
try this
http://www.dealextreme.com/search.dx/search.xperia%20x10
I've have been without my usb cover for months now and I'm used to it at this point. I've looked all over and unless you're going to buy a full new housing and pay all that money for a simple plastic flap, you can't find it anywhere by itself. I've contacted sony and they said they don't make/have that cover as a replacement part, so if you want a new one, you have to send in the whole phone for repair and pay for it, so just get used to it.
In the event that you do find it somehow/somewhere, please update us.
Thanks and good luck.
that's a bit crappy, surely they can see that its gonna be a weak part and will break over time for many users?
oh well, guess I'll just get used to it, it isn't worth an entire shell for a new one
Mine broke today, after a month use.
Anyone got place where we can buy spare one ?
SalThach said:
try this
http://www.dealextreme.com/search.dx/search.xperia x10
Click to expand...
Click to collapse
Has anyone tried this before?
Sent from my X10i using XDA App
fuusuke said:
Has anyone tried this before?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Looking at the pic there is no USB flap cover included.
The flap does show up for the white one. Is it included? I don't know.
outie said:
The flap does show up for the white one. Is it included? I don't know.
Click to expand...
Click to collapse
good eye so it does. has anyone written asking?
Yeah that's weird the black one doesn't have one yet the white one does -_____-
Just a heads up for anything who want to try this, you need to remove the touch glass and re-attach to this new replacement one. I'm personally too scared to do it myself, but i've read about one person person who successfully did it, but got a little crack in his screen for doing so.
Sent from my X10i using XDA App
CNN.CN sells oem black/white housings, both with usb flaps intact.... just a lil pricey
http://cnn.cn/shop/sonyericsson-xperia-c-28_946.html
I use to buy all my blackberry accessories from them, so they get a thumbs up from me
can't post links, but i know cnn.cn has the white flaps for sure. reliable site, i've ordered from them before
How to stick it back in?
Sorry to revive this dead thread...
Does anyone know how to stick the cover back on?!
Mine fell off in my pocket
alanllew said:
Sorry to revive this dead thread...
Does anyone know how to stick the cover back on?!
Mine fell off in my pocket
Click to expand...
Click to collapse
If u referred to the tiny USB cover u can stick back if u squize the parts from plastic clips with a hole in the middle and try to insert from a 45 angle.
Sent from my X10i using XDA App
its right here
http :// cnn.cn /shop /sonyericsson-xperia-sensuous-black-port-cover-p-10754 .html
yep that's it i just got it for my self seeing it as my phone is new and mine is gone lol have no idea where it got to but just go their they have the white one as well just get rid of the spaces
alanllew said:
Sorry to revive this dead thread...
Does anyone know how to stick the cover back on?!
Mine fell off in my pocket
Click to expand...
Click to collapse
I used a pen and a little luck they bit awkward.
Sent from my X10i using XDA App
Housing is cheaper on dealextreme.com, 28$ I recall. Plus the shipping is free.
Sent from my X10i using XDA App
I've had my Rezound for just over two weeks and the MHL port housing is loose! I can literally flick the rectangle shaped black housing around with my finger
I purchased through Amazon as part of the Penny Pincher sale. Anyone else have this issue? I'm debating whether I should do a warranty exchange. When my phone vibrates it makes a loud noise due to this and I'm afraid it might get worse in the future.
Live with it or exchange?
gsiax100 said:
I've had my Rezound for just over two weeks and the MHL port housing is loose! I can literally flick the rectangle shaped black housing around with my finger
I purchased through Amazon as part of the Penny Pincher sale. Anyone else have this issue? I'm debating whether I should do a warranty exchange. When my phone vibrates it makes a loud noise due to this and I'm afraid it might get worse in the future.
Live with it or exchange?
Click to expand...
Click to collapse
Exchange. Having a function like that broken sucks, and mhl has been kind of finnicky for me anyway.
Sent from my ADR6425LVW using xda premium
Exchange!!!
That is an important port used for everything. Charging, data hook up, output to TV etc...
My old phone's port got damaged and even though it wasn't a smart phone it sucked to not be able to hook it up as data and to have weak charging because of it. Had to buy an external battery charger for the last few months of owning it to keep it functional since it started having trouble charging at all. And then I had to copy each pic one at a time to the sd card so I could salvage them because I couldn't hook it up as data.
I also purchased mine for a penny from Amazon and mine has been trouble free.
My wife and I have had this problem on the 2 replacement phones we have each gotten from Amazon. The originals didn't exhibit this behavior. We are going to get two more replacements and hope that they don't show the same issue. It is the black plastic bezel around the port that is loose.
fyi, i don't think the plastic bezel is attached to the actual charging port... so if that's lose, it doesn't really matter as long as the port is soldered firmly to the board.
Sent from my ADR6425LVW using XDA App
jayochs said:
fyi, i don't think the plastic bezel is attached to the actual charging port... so if that's lose, it doesn't really matter as long as the port is soldered firmly to the board.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Exactly. I've had 2 Rezounds, same on both, it's just the bezel, not the port. It is slightly annoying that it rattles when the phone vibrates though.
I have the tablet for a couple of weeks now and the plastic cap on the micro usb charging port has a bent in the middle and wouldn't
close the hole tight any more.
Is it possible to replace the cap without sending the tablet to a service station ?
I have the issue on the charging port as well, let me know what you find out
kalda01 said:
I have the tablet for a couple of weeks now and the plastic cap on the micro usb charging port has a bent in the middle and wouldn't
close the hole tight any more.
Is it possible to replace the cap without sending the tablet to a service station ?
Click to expand...
Click to collapse
I sent mine to Texas after receiving RMA#. I've been waiting over 3 weeks to have it fixed. Tried to buy the cap but could not find it anywhere. I have only found port cover for Xperia phone Z but wasn't sure if they match those on the tablet. Anyway it is fixed now and recently I bought a cradle and it works great. I think it is a must to avoid damaging those covers. Pricey but I think it looks good, functions properly and it is great for watching movies, playing games and typing.
Bottom line send the tablet back to Sony and in the same time get a cradle and you will not have any issues with the tablet's waterproof tabs.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
xlow78 said:
I sent mine to Texas after receiving RMA#. I've been waiting over 3 weeks to have it fixed. Tried to buy the cap but could not find it anywhere. I have only found port cover for Xperia phone Z but wasn't sure if they match those on the tablet. Anyway it is fixed now and recently I bought a cradle and it works great. I think it is a must to avoid damaging those covers. Pricey but I think it looks good, functions properly and it is great for watching movies, playing games and typing.
Bottom line send the tablet back to Sony and in the same time get a cradle and you will not have any issues with the tablet's waterproof tabs.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. I am sure the cradle is the best solution but not very practical when traveling and charging on the road on trains or air plains.
the cap must have a design flow if it breaks only after a couple of weeks.
Agreed. It was not the greatest engineering marvel. Cradle is in fact very thin and it fits the tablet very snug so I don't see any problem of taking it with me when I go. The threaded plug port with an o-ring would have been much better solution than that cheesy tab. But then again not many people would have bought a cradle. It is a good product but like most electronics it has its flows. My advice try not to open those tabs too often or better avoid opening them altogether. They will last forever. Bluetooth headphones, cradle, WiFi can easily facilitate it.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
I would prefer that Sony replaced these, but they told me that when the tiny piece of plastic bends and breaks that it's considered physical damage. I find that odd that a main selling point is its resistance to damage but the part that protects from damage breaks off with normal use. I had to settle for replacement covers I found on ebay.
badwiring said:
I would prefer that Sony replaced these, but they told me that when the tiny piece of plastic bends and breaks that it's considered physical damage. I find that odd that a main selling point is its resistance to damage but the part that protects from damage breaks off with normal use. I had to settle for replacement covers I found on ebay.
Click to expand...
Click to collapse
I also bought one from ebay but i have no idea how to replace it. did you already replace it and if so how ?
I had this situation that the cap got bend because I forgot to put it back after closing the tablet cover over it. I was able to bend it a bit the other side and also notice the little pin needed to be straighten so that it will fit back in place. This is when I notice the hole next to the usb to be used when the cap is open you insert the cap pin in it.
badwiring said:
I would prefer that Sony replaced these, but they told me that when the tiny piece of plastic bends and breaks that it's considered physical damage. I find that odd that a main selling point is its resistance to damage but the part that protects from damage breaks off with normal use. I had to settle for replacement covers I found on ebay.
Click to expand...
Click to collapse
MikeViller said:
I had this situation that the cap got bend because I forgot to put it back after closing the tablet cover over it. I was able to bend it a bit the other side and also notice the little pin needed to be straighten so that it will fit back in place. This is when I notice the hole next to the usb to be used when the cap is open you insert the cap pin in it.
Click to expand...
Click to collapse
i noticed that a while ago but when i searched for that hole on the internet it said it was to vacuum seal it or something so i decided to not put it in there. but did you find a way to remove the cap ?
them4tti said:
i noticed that a while ago but when i searched for that hole on the internet it said it was to vacuum seal it or something so i decided to not put it in there. but did you find a way to remove the cap ?
Click to expand...
Click to collapse
no there's not need for me to remove it close perfectly .... but if you take the manual it says hole for cover
You need to remove the back panel first. There is a video on yt. Seems easy to do it.BTW where did you get those tabs??? Can you send a link?
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
I don't know if that could work as a replacement part: something that looks like the current part, but with an extra rubber plug that would fit inside the mini usb port to hold it in place...
Seems like I now have a reason to get a 3D printer :S
**EDIT***
I remembered something I saw a few years back, is called Sugru, a moldable rubber that cures and can be used for almost anything. Search them out on Google.
xlow78 said:
You need to remove the back panel first. There is a video on yt. Seems easy to do it.BTW where did you get those tabs??? Can you send a link?
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well the problem with removing the back is that it is not waterproof any more when you put it back on
here is a link from where i got mine : battery-cover.de/product_info.php?info=p102_abdeckung-usb-anschluss-tablet-z-weiss-black.html
Btw are you talking a bout a video of replacing the cap or a video about dissabling the tablet ?
From what I've seen the tab cover has a "nipple" which can be squeezed and pushed through the hole (from the inside of the tablet). I don't think it is easily or even possible to do it from the outside. Besides I think the back panel acts like a gasket and seals the inside so I don't understand why would the tablet lose its waterproof capability. Do you have any bad experience?? Besides I don't see why could not you smear very fine silicon layer around the mating parts and make it 100% waterproof! Disassembly is here: http://m.youtube.com/watch?v=zczfTnBFqtA
Good luck and let us know how did you make out.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Caps:
black
black
white
The price ofc. is terrible for so small thing.
It is a pure rip off. Piece of plastic and rubber priced like silver! Even more reasons now to buy the cradle. Too bad you can't use it for USB transfer. It is a big design flaw and I have no idea why did Sony make such cheap and lousy part!
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
.
i decided i am going to send it to sony. this is because my screen started acting weird and i hope they can replace the cover to.
kalda01 said:
I have the tablet for a couple of weeks now and the plastic cap on the micro usb charging port has a bent in the middle and wouldn't
close the hole tight any more.
Is it possible to replace the cap without sending the tablet to a service station ?
Click to expand...
Click to collapse
Search for "USB Cap USB Side Cap Sony Xperia Tablet Z" on ebay, a seller from spain has them, not cheap ($17 usd including shipping), but at least somewhere to find it.
I broke mine and about to order it, what I wonder is how do I remove the still attached plastic part without opening the entire thing...
can anyone provide a link to instructions or video how to replace audio jack port cover? Thanks in advance
Apo11on said:
can anyone provide a link to instructions or video how to replace audio jack port cover? Thanks in advance
Click to expand...
Click to collapse
I've found this
witrigs.com/blog/in-this-way-you-will-replace-sony-xperia-z1-sim-card-sd-card-usb-cover-flap-easily/
I think it's similar
Hi all,
I have just noticed a hair-fracture in main body frame near charging socket. It's appear to be all the way across from charging socket to from where screen starts. In start I thought its a scratch but it bothered me recently n after close examination its appear to be a fracture. As far as I know I never dropped the phone. Despite this phone works perfectly.
Just wondering this is covered under standard warranty or its comes under wear n tear, in that case how costly would be repair, is there someone else experienced the same ?
I really disappointed with the make quality of samsung :s. I would appreciate if someone share something how to proceed?
Thanks
As its a fracture ask Samsung .
But my guess is they will say its damaged .
They all say they did not drop it .
rauppal said:
Hi all,
I have just noticed a hair-fracture in main body frame near charging socket. It's appear to be all the way across from charging socket to from where screen starts. In start I thought its a scratch but it bothered me recently n after close examination its appear to be a fracture. As far as I know I never dropped the phone. Despite this phone works perfectly.
Just wondering this is covered under standard warranty or its comes under wear n tear, in that case how costly would be repair, is there someone else experienced the same ?
I really disappointed with the make quality of samsung :s. I would appreciate if someone share something how to proceed?
Thanks
Click to expand...
Click to collapse
Dude... its the point where two parts of the frame are joined!
Check all the 4 corners and you will notice thinner "fractures" One on the charging port is widest of them all. Everyone has them, no need to worry.
~DemonLord~ said:
Dude... its the point where two parts of the frame are joined!
Check all the 4 corners and you will notice thinner "fractures" One on the charging port is widest of them all. Everyone has them, no need to worry.
Click to expand...
Click to collapse
Those 4 corners of housing as you said have a regular joining marks but I got a irregular crack in housing. It seems like a fracture on one side of usb socket to all the way up to screen. Is this normal or I m just the unlucky one
Sent from my GT-I9300 using XDA Premium 4 mobile app
As i said 4 joint marks on the corners. One thicker fracture on the left side from the middle of the port. And yes its more visible and goes up to the screen.
rauppal said:
Those 4 corners of housing as you said have a regular joining marks but I got a irregular crack in housing. It seems like a fracture on one side of usb socket to all the way up to screen. Is this normal or I m just the unlucky one
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes its cracked.
If you try to search on Google you see its a common problem.
There are treats from a year ago on xda.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Hello all,
Any of you had any issues with the magnetic charging port on your Z2 coming lose? Mine has. Pulled it off the magnetic charging dock and the port was left of the dock.
Please post a picture
Sent from my D6503 using Tapatalk
i dont have any issues with my port. i dont use dock.. but i have the magnetic connector.. the magnetic port is held by a clip in the other side of the metal frame, i think that might have released your port.. thats an easy fix..but u need to disassemble the phone..
this is what came out...
Return the phone at once to where you made your purchase. Insist on either a new phone or a full refund. No brainer.
Let us now how you get on. Good luck and stand your ground!
Ryland
roninr1c said:
this is what came out...
Click to expand...
Click to collapse
LOL
roninr1c said:
this is what came out...
Click to expand...
Click to collapse
OMG. Even a junkyard magnet won't be able to do that with the phone!
Sent from my D6503 using XDA Premium 4 mobile app
Haha, this is really awkward. I hope Sony will fix this for you - looks really like a problem on the manufacturing side.
I wonder if the water resistant capability is vulnerable because of this, can you see internals thru holes after the dock?
sevoflurane said:
OMG. Even a junkyard magnet won't be able to do that with the phone!
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It would, the magnetic port isn't soldered in, those two contact Strips Look like they just plug into something
Sent from my D6503 using Tapatalk
The same issue in South Korea.
roninr1c said:
Hello all,
Any of you had any issues with the magnetic charging port on your Z2 coming lose? Mine has. Pulled it off the magnetic charging dock and the port was left of the dock.
Click to expand...
Click to collapse
I'm sorry, bad English.
Several cases occurred in the same issue, even in our country.
But the problem is the fault of the customer, according to Sony service center.
Many people are angry, but they do not change attitudes.
Sony's quality control is questionable, but they do not recognize it either.
I hope you look forward to a good result. Please let us know results later!
I tohught i'd found someone that had the charging port always crooked problem this is much different.
that is something to look out for.
Worried now as i use the magnetic port exclusively.
This just happened to me today. I removed my phone from the dock this morning and the port was detached from the phone and was stuck on the dock its already my second phone as the first one had digitizer lines, gaps etc.
I'm on my third device now. Just happened to me on monday but I was using a third party charging cable.
it looks like the port is just glued in with the contacts being pushed into the phone. I would have thought they would have made it with a lip so it could not be pulled out!? or is that to much like common sense lol.
This is hilarious, I can't believe this have happened to the charging port, it looks very sturdy.
i was planning to buy this (it has really good reviews, 5 stars on all the reviews,.... although its only like 9 people that reviewed it)
http://www.amazon.com/Magnector-Per...402475479&sr=8-4&keywords=z2+magnetic+charger
it says that it has twice the Magnetic Power than original Sony Xperia Charging Cable.... that sounds good because i heard the original one is kinda weak and disconnects easy,.... but in the other hand it increases the possibility of making the magnetic port loose,.....
has anyone tried this product yet????
stargate1000 said:
I'm on my third device now. Just happened to me on monday but I was using a third party charging cable.
it looks like the port is just glued in with the contacts being pushed into the phone. I would have thought they would have made it with a lip so it could not be pulled out!? or is that to much like common sense lol.
Click to expand...
Click to collapse
Common sense does not exist in the corporate world. They are mutually exclusive (save for some extenuating circumstances).
So how does this affect waterproofing, is the phone stilled even if the port isn't in?
If it is then I wouldn't mind having to put dab of glue and shove it back in if mine ever came out.
If it's not then it might have been a leakage point for some of the people that ended up with moisture inside after phone is submerged.
I guess I'm going to have look for those tear down photos & see if it shows details of the frame/magnetic port.
Sent from my D6503 using Xparent Red Tapatalk 2
Well this is awkward. My port just came loose after using Sony original magnetic charger. Darn that's annoying, guess I have to return it. Should I relock the Bootloader? It doesn't have anything to do with software..
Sent from my D6503
I just sent it for repair, not sure if they can fix it or I get a new phone. Hopefully it's not "my fault". I will update when I hear from them.
Please update me, mine did not come out but at the opposite it looks like it's being pushed in, there is a tiny gap showing on the left side as if it's going to fall inside the phone from one side.