CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github! Send pull requests with your changes!
INSTRUCTIONS:
- First time flashing CM 6 to your Nexus (or coming from another ROM)?
1. Unlock/root your device and install Clockwork Recovery via ROM Manager or Amon_RA's recovery image
2. Do a Nandroid backup!
3. Update your radio if necessary
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
I'm all over it!!!
Wohoo!! sounds great! 6.1 is out!!!!!
Been waitin WEEKS for this!! hhhhooolllyyy shyiiiitt, iiiiitttss a bigg one!!
HOLY SANTA CLAUS ****!!!! Its Xmas in July *****es!!
Thanks Cyanogen n #teamdouche..
Really hope that this version of cm can fix the exchange issue rather than waiting for Google to fix it. Anyway, good job. Will try it out soon. Thanks.
Sent from my Nexus One using XDA App
woot!!!!!!
You guys are going to enjoy it.
Aw man, no car dock default audio level on the headphone jack bug fix lovin? It's a froyo "feature", when the dock is detected headphone level is set low because, according to the comments in the source, the user cannot adjust the volume so they set it by default. And the default is so low as to render the dock totally useless.
Sent from my Nexus One using XDA App
Yes! Thanks for the hard work!
THank you cyanogen. You and your time are the best
I am a happy person
Thank you!! is there apps2ext on this?
thanks a lot....
what apps2sd did you guys decide on, and is it on this?
Also whats this hdpi gapps FRF91. is that different than the alpha FRF91 we first flashed?
been running the nightly builds and didnt have no issue cant wait to flash this on the nexus one n my nephews g1 ....cant wait for the mytouch cm6
WOW, typical #teamdouche......Nightly...flashed.....new release in 20 min...like the .1 all over again...LOVE IT!! Sweet release guys!
i noticed that a new nightly was also released today abotu the same this thread was created. comparing the two, are there differences? is this rc1 the same as the latest nightly build? http://buildbot.teamdouche.net/nightly/passion/cm_passion-07112010-034628.zip
Been waiting for this for ages. Thanks a lot.
What Linpack score does this get?
Edit: I have the same version of radio already installed. I don't need to flash it again, do I?
Does anyone know what the difference is in the new gapps
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Note: this build as a Release Candidate has been superceded by the latest nightlies due to many bug fixes. This thread will get a new Release Candidate as soon as we feel it is ready for Release.
First time flashing CyanogenMod 7 to the Samsung Galaxy S II, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Flash CyanogenMod again (without reboot - this is a bug we will fix soon).
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
Upon review of user feedback and bugs that have been discovered with what was released as 7.1.0 stable, we no longer feel the 'stable' tag is appropriate for this rom.
The download is still available, however it is now being treated as a Release Candidate, rather than a proper stable release.
Sorry for all the confusion, and any issues you may experience. We will release a 7.1+ once we feel the ROM has matured to a truly stable status.
-CyanogenMod SGS Team
CyanogenMod:
Latest version: update-cm-7.1.0-RC1-Galaxys2ATT
Download: link
Mirror: link
MD5sum: aab37aa86f6615f0ddc7a717022cc141
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Been using since the first day I received my SG2...thanks.
is this a new version or the same one thats been released for a while?
CyanogenMod said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Samsung Galaxy S II, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Galaxys2ATT
Download: link
Mirror: link
MD5sum: aab37aa86f6615f0ddc7a717022cc141
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Click to expand...
Click to collapse
Thanks for your continued efforts to simplify things for us poor shmoes.
Does this have the same battery drain issue?
Sent from my SAMSUNG-SGH-I777 using XDA App
Downloading now and giving it a try. Thanks guys
Freddy2Fred said:
is this a new version or the same one thats been released for a while?
Click to expand...
Click to collapse
New, this is a stable release. CM7 v7.1.0 was just released and it included support for many new devices the ATT SGS2 being one of them
Battery life? It sucked on the captivate. No smart dialing function either
Sent from my SAMSUNG-SGH-I777 using xda premium
The battery was pretty bad for me today. I have gone back to nightlies. Love this rom though.
Sent from my SGH-I777 using XDA App
flucks said:
The battery was pretty bad for me today. I have gone back to nightlies. Love this rom though.
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
Were you full when you flashed or did you recalibrate after? That could potentially make a BIG difference.
read the instructions....can i not just flash codeworkx kernal w/ CWM with Odin v1.7....just connect in download mode, then flash the .tar?
abacon15 said:
Were you full when you flashed or did you recalibrate after? That could potentially make a BIG difference.
Click to expand...
Click to collapse
explain please. i never calibrated my phone when flashing new rom. is it a must? theres times when i flash a rom at 60-70%.
The way I understand it when you flash a rom it comes in thinking whatever the battery has on it at the time of the flash is 100%. If you see that the battery has been "fully charged" on your phone then you can usually shut it off and plug it in and see the battery that pops up will not say its fully charged. You can let it charge (while off mind you) and when it gets done and says 100% turn it back on and run this app https://market.android.com/details?id=com.nema.batterycalibration and then run it dead. And yes, its a must, I generally do it after flashing a rom. You can't complain about battery life if this hasn't been done, the phone won't ever truly have a full charge.
simpl3lang said:
explain please. i never calibrated my phone when flashing new rom. is it a must? theres times when i flash a rom at 60-70%.
Click to expand...
Click to collapse
Your always going to want to flash a new nightly with 100% battery to get the best battery life and full potential. I'd recommend when flashing your next nightly to give your phone a full charge, download the app from the market battery calibration, let your phone charge to 100% and follow the instructions so that your battery gets calibrated, the longevity of it will span a lot farther.
abacon15 said:
The way I understand it when you flash a rom it comes in thinking whatever the battery has on it at the time of the flash is 100%. If you see that the battery has been "fully charged" on your phone then you can usually shut it off and plug it in and see the battery that pops up will not say its fully charged. You can let it charge (while off mind you) and when it gets done and says 100% turn it back on and run this app https://market.android.com/details?id=com.nema.batterycalibration and then run it dead. And yes, its a must, I generally do it after flashing a rom. You can't complain about battery life if this hasn't been done, the phone won't ever truly have a full charge.
Click to expand...
Click to collapse
I thought I heard someone say this process does nothing for Samsung devices? Or am I incorrect?
Full and calibrated :/
Sent from my SGH-I777 using XDA App
Simba501 said:
I thought I heard someone say this process does nothing for Samsung devices? Or am I incorrect?
Click to expand...
Click to collapse
did nothing on the infuse - works on the sgs2.
So here's my question, I'm really loving the Stock Camera application, and in my previous experience with CM7, the camera app leaves ALOT to be desired! I'm sure it's the same but what is everyone else doing to continue using the amazing camera app that Samsung sent it with?
scoot05redss said:
So here's my question, I'm really loving the Stock Camera application, and in my previous experience with CM7, the camera app leaves ALOT to be desired! I'm sure it's the same but what is everyone else doing to continue using the amazing camera app that Samsung sent it with?
Click to expand...
Click to collapse
can't do it - the stock camera .apk uses a different framework than CM7 does.
Just installed this, and wow, extremely underwhelmed. Seems like a step backwards compared to the latest touchwiz, I dare say. I think the problem is, this has become a one size fits all rom... May be great for some older devices, but does not do the S2 justice. :-\
I don't have 10 posts yet so I can't place this in the Android development forum yet, please bear with me if you would like to use this ROM
This unofficial CM10.1.2 works only on E970 devices updated to 4.1.2 OTA(or manually updated TZ/RPM partitions)
First things first: I am NOT a developer and this ROM is not fully ported yet, this is an announcement that as soon as I resolve the stuck Navigation Bar
since we have hardware keys I will post the ROM in the Android Development forum.
Code:
[SIZE="3"]#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/[/SIZE]
Consider this build alpha, it has issues, halo works though
File is being uploaded to Dev-Host nao.
Please be patient as I'm using free hotel WiFi, and it's awful
Download link at bottom of post.
This ROM is largely based on dvhexer's amazing CM 10.1 LGOG/N4 build and Morpheus90's CM 10.1.2 with HALO. All thanks should be directed towards
them as without actual devs for a starting point we wouldn't have this.
dvhexer's CM POST for LGOG
http://forum.xda-developers.com/showthread.php?t=2130639
Morpheus90's CM+HALO for Nexus4
http://forum.xda-developers.com/showthread.php?t=2346265
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 (Jelly Bean),
which is designed to increase performance and reliability over stock Android for your device.
I wanted a ROM as Stock as possible with Halo from Paranoid Android, so I started this project for my own and
decided to share results with you all.
What you get is the latest rock-solid Stable version of CyanogenMod (10.1.2) with no extra additions,
except for Halo from ParanoidAndroid.
Notes:
- Backup your EFS partitions before flashing any firmware: http://forum.xda-developers.com/show....php?t=2161611
- Gapps are not included.
I use official Gapps: http://tinyw.in/C7XP
- No modem is included in this ROM. JB ATT modem is fully functional now. Refer to this thread for modem links: http://forum.xda-developers.com/show....php?t=2270319
- The kernel included in the ROM is based on CM mako kernel + faux123 updates + dvhexers updates to support all E970 features.
- Ignore OTA CM updates when you receive notifications.
Click to expand...
Click to collapse
Installation instructions:
- boot into recovery.
- do a backup of your current rom/data !
- do 'wipe data/factory reset'
- install ROM zip
- install Gapps
- reboot
(original fix by dvhexer)
- If NFC does not work for you, flash this file in recovery: http://d-h.st/51v Flash it ONLY if NFC does not work for you!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Code:
Changelog - 20130720 (gimp)
+kernel with oc/uv/colors/io sched/fast charge/etc
OC Kernel on temporary hold O_o
(when build is posted in development forum)
Changelog - 20130714 (Morpheus90)
* CM 10.1.2
* New Halo
Changelog - 20130713 (dvhexer)
- working autofocus in camera(both picture and video modes)
* Autofocus in video mode is really the only thing I missed.
- AT&T is shown as AT&T by JB radio. No Maritime bs.
- "stock" kernel for now, that is no OC/UV/Custom colors etc.
- no N4 conversion support for now.
- bugs... You're welcome to report them
Code:
Bugs:
1. If you set the vibration around 50 (+/-5) it occasionally forces a hard
boot, please be advised of this and do not make this setting permanent on
reboot. You have been warned. Anything that uses vibration can trigger it.
it will drive you insane.
Stock setting of 70 for vibration is ok, can occasionally hang if you slam the
back button 10 times for some long recursive apps (file managers)
41 works for me.
2. Text/MMS app crashes on launch
3. External SD card not visible
4. Default APN is 3G, enable APN of choice in Settings>more>mobile networks
Screenshots are below, notice the soft keys still from Nexus, everything else seems good, will test again with both kernel options before it is posted.
(History of garbage done)
Bootloop / no boot - needed libs from port, may regress servers lib
Boot - constant crashing com.android.phone - LgeLte dependency fixed
Boot - NFC service crashed constantly - Was referencing non existent N4 files
more to follow.
Fixed some outstanding build.prop issues.
Upload to dev host began @ 1545 EST - gonna be awhile
http://d-h.st/ak8
<<-- Download link.
Remember, it's glitchy but I'll continue to work on it, BACKUP for the love of god before you flash
-gimp
sedspac fuch
reserved
still uploading?
Sent from my LG-E970 using xda app-developers app
Link is posted now, I had to give up earlier, connection resets every 3 minutes.
It's almost 2am here, so took about 20 minutes. Enjoy.
iamtha1 said:
still uploading?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Mods please move to og android development. Thanks
Sent from my Optimus G using xda app-developers app
CyanogenMod 10.1 UNOFFICIAL
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features
* included in this ROM before flashing it!
*/
Installation
Be unlocked, rooted, and have custom recovery already. TWRP 2.6.x.x is needed.
Download ROM here: http://diesburg.co/?dir=grouper/unofficial
Download Gapps here: http://pio-masaki.com/index.php?dir=gapps/4.2.2/
Have both files copied to your nexus and reboot to recovery
Flash the rom, then flash gapps, then reboot to system.
Changelogs and source are the same as cyanogenmod 10.1 nightlies as this is built straight from their source.
Credits to the cyanogenmod team and anyone involved in it
And big credits to pio_masaki for helping me a lot through the building process and answering a lot of questions for me.
You may wonder, what do you get from this that you don't get from CM10.1 nightlies? Well, nothing ATM... this is the first rom I've built so to start, I built straight from their source with no changes.
Future changes:
I will be adding tablet UI as that is what I prefer.
As stated this is my first rom, so to mods and users, if there is something wrong with my OP, please, let me know and I will fix it.
Why?
There's an official stable version
r-l said:
Why?
There's an official stable version
Click to expand...
Click to collapse
Because I'm learning. CM 10.1 is an easy start. CM10.2 isn't as stuff isn't all ready yet. And I'll share the results of me learning as I go along. I mentioned above, I'm gonna make it tablet UI also, you don't get that in CM10.1 stable.
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Quote:
#include /* * Your warranty is now void. * *
I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
Please * do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* * Submitting bug reports on nightly builds is the leading * cause of male impotence. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Do not submit bugs to gerrit about this rom.
This is development thread. DO NOT ASK FOR ETAs.
so guys k2wl has told me to make this thread
as you all know ppl here have been trying really hard to getcm11 to boot on this device but they have not been sucessful !
following instructions given by k2wl and by fixing errors here and there i was able to make a bootable cm11 for this device
it has been tested by me and freitaz
it boots but nothing works im serious coz at dis time the main priority was to make it boot n then fix all the bugs later!
so when i told k2wl abt dis he said that he'll help us so lets hope for the best and i am no developer it was jst a stroke of luck tht i was able to boot it i think
so im posting here the link of my build so tht other devs for this device can use it coz i dnt think im mch experienced
http://www.mediafire.com/download/q1...delos3geur.zip
my first build
here is the device repository link
https://github.com/mahirkukreja/android_device_samsung_delos3geur
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy win Duos i8552, or coming from another ROM:
- Make sure you are on Stock 4.1.2 ROM.
- Boot into recovery(CWM 6.0.4.5 recovery is must)
- Wipe data / factory reset
- Wipe Dalvik Cache
- Flash CM10.2 ROM
- Flash Gapps
- Reboot
Gapps
http://goo.im/gapps
CWM 6.0.4.5
http://forum.xda-developers.com/show....php?t=2570950
CREDITS
Cyanogenmod Team
Samsung for source
XDA:DevDB Information
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0 , ROM for the Samsung Galaxy Grand Quattro
Contributors
mahir kukreja
Version Information
Status: Testing
Created 2014-07-02
Last Updated 2014-07-02
cool project continued
c'mon, cool project continued, but where is the download link.
the link does not work
(sorry my english)
Refer to first post in this thread:
http://forum.xda-developers.com/grand-quattro/orig-development/dev-cyanogenmod-11-0-t2802701
Hi. My gf was bought a Galaxy Win (GT-8552B) yesterday, and I wish to install a ~decent~ rom (the stock rom is very laggy). I have a Moto G and contribute to solve some bugs on custom roms based on CM11, and I could help the project in next stage (yeah, I cant install a ultra-experimental rom in girlfriend phone lol) Can explain what's working? (dont need be very detailed, only to we know the stage that we are)
Well, congratulation for the start. This phone owners will be very happy with CM11.
Dan_Jacques said:
Hi. My gf was bought a Galaxy Win (GT-8552B) yesterday, and I wish to install a ~decent~ rom (the stock rom is very laggy). I have a Moto G and contribute to solve some bugs on custom roms based on CM11, and I could help the project in next stage (yeah, I cant install a ultra-experimental rom in girlfriend phone lol) Can explain what's working? (dont need be very detailed, only to we know the stage that we are)
Well, congratulation for the start. This phone owners will be very happy with CM11.
Click to expand...
Click to collapse
well, as the developer said, NOTHING IS WORKING
Dan_Jacques said:
Can explain what's working? (dont need be very detailed, only to we know the stage that we are)
Click to expand...
Click to collapse
The OP mentioned it on thread at Android Development section. But, since I tested it, let me explain: the rom just boots to home screen. Nothing else is working: no camera, no audio, no wifi, no bluetooth, no carrier signal, only one SIM. But in time they will get it to work. :good:
:good:good:
mahir kukreja said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Quote:
#include /* * Your warranty is now void. * *
I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
Please * do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* * Submitting bug reports on nightly builds is the leading * cause of male impotence. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Do not submit bugs to gerrit about this rom.
This is development thread. DO NOT ASK FOR ETAs.
so guys k2wl has told me to make this thread
as you all know ppl here have been trying really hard to getcm11 to boot on this device but they have not been sucessful !
following instructions given by k2wl and by fixing errors here and there i was able to make a bootable cm11 for this device
it has been tested by me and freitaz
it boots but nothing works im serious coz at dis time the main priority was to make it boot n then fix all the bugs later!
so when i told k2wl abt dis he said that he'll help us so lets hope for the best and i am no developer it was jst a stroke of luck tht i was able to boot it i think
so im posting here the link of my build so tht other devs for this device can use it coz i dnt think im mch experienced
http://www.mediafire.com/download/q1...delos3geur.zip
my first build
here is the device repository link
https://github.com/mahirkukreja/android_device_samsung_delos3geur
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy win Duos i8552, or coming from another ROM:
- Make sure you are on Stock 4.1.2 ROM.
- Boot into recovery(CWM 6.0.4.5 recovery is must)
- Wipe data / factory reset
- Wipe Dalvik Cache
- Flash CM10.2 ROM
- Flash Gapps
- Reboot
Gapps
http://goo.im/gapps
CWM 6.0.4.5
http://forum.xda-developers.com/show....php?t=2570950
CREDITS
Cyanogenmod Team
Samsung for source
XDA:DevDB Information
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0 , ROM for the Samsung Galaxy Grand Quattro
Contributors
mahir kukreja
Version Information
Status: Testing
Created 2014-07-02
Last Updated 2014-07-02
Click to expand...
Click to collapse
Is it possible for you to disclose all steps?
My questions are :
1. What VM Software you used or directly developed in Linux?
2. If Linux then I586 or x64 version used?
3. Partition Schema. Specially /home.
4. Total VM Space for developing CM for one instance?
5. Version of Java used.
6. Version of make used.
7. Version of python used.
8. What API version used? 16 or else?
9. In repo what repository you have downloaded?
10. For breakfast what device name you used? delos3geur or I8552?
Regards
Used ubuntu 13.10 as dual boot 100gb partition
64bit
Cm11 takes approx 45gb space
For everything else simply followed k2wl's guide in his device repository posted in general section
mahir kukreja said:
Used ubuntu 13.10 as dual boot 100gb partition
64bit
Cm11 takes approx 45gb space
For everything else simply followed k2wl's guide in his device repository posted in general section
Click to expand...
Click to collapse
http://wiki.cyanogenmod.org/w/Build_for_t769
Note:
You want to use a 64-bit version of Linux. According to Google, 32-bit Linux environment will only work if you are building older versions prior to Gingerbread (2.3.x)/CyanogenMod 7. However, as of 10.1 CyanogenMod does not build with 64bit host binaries on some systems. You will have to set something like BUILD_HOST_32bit=1 in your environment when building on such 64bit system.
Hopefully you have set the environment.
Regards
works on GT-I8552B ???????????
mahir kukreja said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Quote:
#include /* * Your warranty is now void. * *
I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
Please * do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* * Submitting bug reports on nightly builds is the leading * cause of male impotence. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Do not submit bugs to gerrit about this rom.
This is development thread. DO NOT ASK FOR ETAs.
so guys k2wl has told me to make this thread
as you all know ppl here have been trying really hard to getcm11 to boot on this device but they have not been sucessful !
following instructions given by k2wl and by fixing errors here and there i was able to make a bootable cm11 for this device
it has been tested by me and freitaz
it boots but nothing works im serious coz at dis time the main priority was to make it boot n then fix all the bugs later!
so when i told k2wl abt dis he said that he'll help us so lets hope for the best and i am no developer it was jst a stroke of luck tht i was able to boot it i think
so im posting here the link of my build so tht other devs for this device can use it coz i dnt think im mch experienced
http://www.mediafire.com/download/q1...delos3geur.zip
my first build
here is the device repository link
https://github.com/mahirkukreja/android_device_samsung_delos3geur
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy win Duos i8552, or coming from another ROM:
- Make sure you are on Stock 4.1.2 ROM.
- Boot into recovery(CWM 6.0.4.5 recovery is must)
- Wipe data / factory reset
- Wipe Dalvik Cache
- Flash CM10.2 ROM
- Flash Gapps
- Reboot
Gapps
http://goo.im/gapps
CWM 6.0.4.5
http://forum.xda-developers.com/show....php?t=2570950
CREDITS
Cyanogenmod Team
Samsung for source
XDA:DevDB Information
[DEV][ROM][4.4.4][UNOFFICIAL][GT-I8552] CyanogenMod 11.0 , ROM for the Samsung Galaxy Grand Quattro
Contributors
mahir kukreja
Version Information
Status: Testing
Created 2014-07-02
Last Updated 2014-07-02
Click to expand...
Click to collapse
works on GT-I8552B
RockyBR said:
works on GT-I8552B
Click to expand...
Click to collapse
GT-I8552B is the same as GT-I8552. The extra 'B' appears only in some countries.
Until Dont works
iead_20 said:
well, as the developer said, NOTHING IS WORKING
Click to expand...
Click to collapse
hello, I was release one test from instalation on my win Brazil I8552 and Still not working the ´Wi fi, Sim cards, storage, SMS, 3G network, sounds, camera . But is flashable and run very well.
Mauricio Rosa
iead_20 said:
well, as the developer said, NOTHING IS WORKING
Click to expand...
Click to collapse
mjraogr said:
hello, I was release one test from instalation on my win Brazil I8552 and Still not working the ´Wi fi, Sim cards, storage, SMS, 3G network, sounds, camera . But is flashable and run very well.
Mauricio Rosa
Click to expand...
Click to collapse
The External SD Card has already been fixed.
Audio has been partially fixed, but the audio is only from the front speakers, and mono [obviously]
Camera is not stable due to the libcamera troubles
Internal SD is being worked upon right now.
Wi-Fi, Bluetooth, and RIL is not fixed yet.
These are the updates till today.
there's something new?
Not yet, they are still trying to fix both storages... soon they will fix it and then the work around other things will increase
freitaz said:
Not yet, they are still trying to fix both storages... soon they will fix it and then the work around other things will increase
Click to expand...
Click to collapse
moved on a bit in camera as well will take a look at it after storage
n external sd is fullyfixed causes problems only when we try to mount internal sd at the correct place thats wht is taking a lotta time
I have a GT-I8552B
Install this ROM form all possible (1 * CUSTOM updating their app, 2 CUSTOM factory updating the app with no extras, 3 * formatting system).
1 * Starts and stays in the CM logo
2 * and 3 * starts normally but does not work network, wifi, bluetooth not work to my backup that I restored.
I did not test deeper fuinciona but overall very very fluid.
QUESTION:
-In the case of my computer that is DualChip, operate both SIMs?
-They be able to increase the pixels to take advantage of more screen 4.7 "?
For times we are waiting for something like this, unfortunately this phone is forgotten by Samsung, the cyanogen is amazing, and bring it to 8552 will benefit the owners of that smart. Congratulations for the initiative. @mahir @k2wl @yajnab
Sent from my GT-I8552B using XDA Premium 4 mobile app
Please Present The link of the Completly Rom Working one Soon.Waiting for long Time
dmlmagal said:
For times we are waiting for something like this, unfortunately this phone is forgotten by Samsung, the cyanogen is amazing, and bring it to 8552 will benefit the owners of that smart. Congratulations for the initiative. @mahir @k2wl @yajnab
Sent from my GT-I8552B using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please Present The link of the Completly Rom Working one Soon.Waiting for long Time
Beta is here, go try it
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
Click to expand...
Click to collapse
Yup. It's finally here. CM12 with basically everything* working.
*Working:
Pretty much everything:
WiFi (Reports of 5Ghz being broken)
2G/3G/LTE
Camera (back and front-facing and LED flash, no 4K recording as it's not in CM yet) (new issues with camera connection error, and quality)
Sound (little bit quiet)
Screen (duh)
Proximity, Accelerometer, Gyroscope
SDCard read/write
GPS (can drain battery really fast)
*Not working:
Wireless Charging (it works but it's very, very slow)
Bluetooth - (All of it)
NFC - (Might be a battery killer in current state, uninstall or freeze it in TiBu)
Installation Instructions:
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery.
1. Download this and GApps (recommended PA GApps here You are going to need to use the Lollipop ones, this is 5.0)
2. Put both on Internal Storage
3. Reboot into recovery
4. BACKUP CURRENT ROM
5. Factory Reset/Wipe
6. Flash CM12 (no need to wipe System)
7. Flash GApps
(Optional: flash SuperSU Lollipop Edition for Root. Download here)
8. Reboot
9. ???
10. Profit
Downloads
THE ALPHA IS LABELED ALPHA FOR A REASON, IF YOU FLASH IT, EXPECT THINGS NOT TO WORK.
Basketbuild: https://s.basketbuild.com/devs/jholtom/ls990/cm12/
Androidfilehost: https://www.androidfilehost.com/?w=files&flid=21282
Repositories are at github.com/jholtom
Kernel sources are at github.com/invisiblek/android_kernel_lge_g3
@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.
@Berzerker7, shoutout because I stole your thread body.
XDA:DevDB Information
[ROM][CM12][UNOFFICIAL] CyanogenMod 12 BETA, ROM for the Sprint LG G3
Contributors
jholtom, invisiblek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-19
Last Updated 2014-11-22
Word. I'm in. Very excited for this.
I guess I could say...first? Haha.
Wow this is unexpected.
I have a nexus 9 and i haven't even seen CM pop for it yet... LOL
Could this day get ANY better?!? I contend that it can not!
The only way my day would be better is if my sold item on eBay would get paid. Haha. But this is great guys. Thanks so much for getting this up.
Presumably, the same fix for BT and NFC will work for both CM11 and CM12, once it's uncovered.
I can't believe this is about to work as well as CM11. You worked so fast! Can't wait to try.
BT, I think I have discovered. NFC. not quite yet.
I didn't read and tried the alpha! Haha. I got data and WiFi working for a second by dirty flashing cm 12 over cm 11 until it had constant reboots.
Now that that fun is over I'll wait for the beta to finish building and uploading.
Sent from my LG-ls990 using XDA Free mobile app
Why not use the CM 5.0 Gapps?
Pa gapps are the ones that are most updated ......they do a great job of getting them up right away
Great job, thought you seemed a little quiet, been working your tail off. Thanks for this big time. Keeping an eye.
Sent from my LG-ls990 using Xparent BlueTapatalk 2
Thanks for bringing this to us,
Unlock?
Does this add support for GSM sims?
Saved me the trouble of making it myself
So am I correct in saying that this is not as usable as the CM 11 build?
Sent from my Pokedex
garylgray said:
So am I correct in saying that this is not as usable as the CM 11 build?
Sent from my Pokedex
Click to expand...
Click to collapse
Right. Until the Beta is finished building all there is for now is the Alpha which is going to have issues likely beyond what CM11 carries.
deadheadgratefully said:
Does this add support for GSM sims?
Click to expand...
Click to collapse
I ask this too
Sent from my LGLS990 using XDA Free mobile app
jholtom said:
BT, I think I have discovered. NFC. not quite yet.
Click to expand...
Click to collapse
Care to explain? Always wonder how these things work, and how much coding a ROM Dev does to fix stuff like broken BT.
WOW. Great job man. This is definitely going to help my jonesing for a Nexus 6, lol.
What a time to be alive! ?