Hi all
I have got a new sony x10 mini pro, and have an odd issue that seems a design floor.
When on a call my ear constantly presses the mute button and mutes people.
any one know of a way to remove the mute button on the interface or another app that can be used for in call functions.
any advice would be much apreiciated.
thank you
Mat
Place rthe phone closer to the ear so that the proximity sensor disables rthe screen
Sent from my U20i using XDA App
i have d same issue n keep muting calls
I have posted the same issue here
I use hands free but it is still easy to press with the side of your hand if you are holding the phone...
I notice on my phone the touch still works outside the screen border. and it sometimes goes on speaker or mute
+1
Really need a fix for this. Mostly the mute button is the problem, but i have had the loudspeaker activated a few times too.
+1
This is really annoying.
+1
I really nead a solution for this.
I was also annoyed with this, so I made an app that launches it self after accepting the call to avoid the issue. The app can be found at my site on paxanima DOT net (can't post URLs yet, apparently)
I just made it, so not too much real life testing, but seems to do the trick.
paxanima said:
I was also annoyed with this, so I made an app that launches it self after accepting the call to avoid the issue. The app can be found at my site on paxanima DOT net (can't post URLs yet, apparently)
I just made it, so not too much real life testing, but seems to do the trick.
Click to expand...
Click to collapse
Good work on that, thats a start.
But can someone just remove the goddamn mute button? UHHH!
It's too complicated for me. I think i installed like 4-5 apps but still couldnt get to the point where you can get the apk from the phone.
True, this is very annoying. SE has received plenty of complaints so I hope they're working on a solution. I am wondering if installing any of the new custom roms would sort out the issue for me since waiting for SE updates is a nightmare.
My problems started when I first updated to 2.1 where it happened in more than half of calls and got better with the last update and now happens only occasionally.
i never had that problem but i think that costum rom will help for these prob.
sory for bad english
Yeah, you have to be careful. Hold your phone from the back to avoid touching the front sides and slowly approach it to your head (the proximity sensor is at the top left of the phone). I'm pretty sure I look like a retard while doing so but hey, better than having the person on the other end saying "hello? is there anybody here? hello?".
Same here
This issue has also been annoying me from the beginning, and on every release of the SE standard ROMS. I don't understand why some people have the issue and others don't. Maybe it has something to do with the shape of one's ears??
No seriously, when i do some tests, like calling to my voicemail and then holding the phone in my hand, on some occasions the phone goes black after covering the proximity sensor with my finger, and sometimes the phone does not react at all when covering the sensor. So maybe some processes that are running prevent the proximity sensor from working correctly.
Would it be possible to adjust the semcphone.apk to have no mute button at all? I never use this option anyway.
Or is it only possible to change the shape and color of the icons/images.
As far as I know. When ever you made a call or answering call, the screen will turn off, right after you place the phone on your ear... So there's should be no pproblem answering or making call and suddenly pressed the mute button with own ear. Im using the same phone, and making almost 20 to 30 calls a day. And never even once encounter the problem as stated.
Sent from my U20i using XDA Premium App
I get this problem once in awhile too. I have to bring the phone to my ear slowly.
can't we just replace the dailer APK with something from HTC or something?
I also hate the current contact list, theres no smart search.
Yes you can. But it has to be ported with some mod for it to work.
Sent from my U20i using XDA Premium App
Related
Basically when I get a call, my ringtone starts quietly, and quickly increases the volume to max. (max being whatever you set as your ring volume.)
Does this happen on all of our phones? This was not an issue with my G1 AFAIRemember.
Thanks guys!
Its not a bug, its a feature. However I do agree there needs to be toggle options for a lot of little things on this phone, ie: battery notifications.
So as of right now, no. We'll just have to hope Samsung throws a lot of changes into their Froyo update...
All Samsung phones at least 4 which I had this feature so don't worry !
q426669 said:
Basically when I get a call, my ringtone starts quietly, and quickly increases the volume to max. (max being whatever you set as your ring volume.)
Does this happen on all of our phones? This was not an issue with my G1 AFAIRemember.
Thanks guys!
Click to expand...
Click to collapse
How exactly is this an issue ???? this is the 3rd or 4th thread I seen about this feature.... please explain .,.,,.,.,.,
I did search before I posted, I just did not see any relevant threads.
This is an issue because I personally dislike having this "feature". It was not a problem on my G1, and almost every other phone that I've used has it as a ringer option.
I checked all the service menu's hoping to find something relevant, to no avail lol.
Here's hoping CM fixes this =)
q426669 said:
I did search before I posted, I just did not see any relevant threads.
This is an issue because I personally dislike having this "feature". It was not a problem on my G1, and almost every other phone that I've used has it as a ringer option.
I checked all the service menu's hoping to find something relevant, to no avail lol.
Here's hoping CM fixes this =)
Click to expand...
Click to collapse
It is, for the most part a Samsung Thing. On all of the older samsung phones, The Ringer speaker was also the Ear piece Speaker. As well as the Speaker phone speaker.
That was done so when you put the phone to your ear and say an incoming call beats your out going call (Happens to me sometimes) The ringer does not damage your hearing.
the only work around for this so far is just to edit the ringtone and insert a few seconds of silence (2-3) in the beginning and then have the ringtone play out normally
Thanks for the info guys. I will try adding a few seconds of extra sound to the front of my ringtones for now.
Maybe this will be fixed with a proper CyanMod lol
I guess that gets rid of the fade-in, but it makes even less sense than before. Not really a practical solution to anything (not trying to flame). You're just going from your ringtone fading in, to not even hearing your phone ring for a few seconds.
I mean unless you like the first 2 seconds of your ringtone THAT much.
That's an annoying feature regardless.
I searched the forum but could not find this. Please bear with me!
While I get incoming calls in my X10i, the phone sometimes rings and sometimes doesn't. This results in lot of missed calls. Very weirdly, if the phone rings in the first call, in the next call, it might not, or vice versa. This happens without any specific trend. Any help, please?
Secondly, can anyone please tell how to check the proximity sensor? I somehow feel mine is not working, as previously, the phone would light up on taking out of cover. Now it doesn't.
Any help any one?
sagar131981 said:
I searched the forum but could not find this. Please bear with me!
While I get incoming calls in my X10i, the phone sometimes rings and sometimes doesn't. This results in lot of missed calls. Very weirdly, if the phone rings in the first call, in the next call, it might not, or vice versa. This happens without any specific trend. Any help, please?
Secondly, can anyone please tell how to check the proximity sensor? I somehow feel mine is not working, as previously, the phone would light up on taking out of cover. Now it doesn't.
Click to expand...
Click to collapse
yes i had same issue when i was using a app called audio buddy which control my volume levels after removing had no issue after that.
DJBoxer said:
yes i had same issue when i was using a app called audio buddy which control my volume levels after removing had no issue after that.
Click to expand...
Click to collapse
Then can it be that some downloaded app is creating this problem? I dont have any volume controller app, but can some downloaded games or other app doing this to the phone?
So the ringer problem is not mine alone. Can a software update fix this?
are you using a task killer???? it seems to be the root of most evils... suggest switching any autokilling off if you are.
im_iceman said:
are you using a task killer???? it seems to be the root of most evils... suggest switching any autokilling off if you are.
Click to expand...
Click to collapse
Yes I am using ATK. But its being used for a long time, and the problem surfaced just 5/6 days back. Still what do you say, I uninstall it and see? This problem is giving me quite a headache, as I am missing many important calls.
Not getting much help.
I uninstalled atk, a few games, but the problem persists. So what, a software update. Someone pls help, as am missing out lot of important calls.
Sent from my X10i using XDA App
Am I the only one having problems with the Proximity Sensor on the Atrix? I can't seem to get it to kick in when on a call. I have already dial-toned a couple of people when talking on the phone. I have tried covering up the sensor by placing the palm of my hand over the to 1/2 of the phone and it never kicks in.
Can someone verify for me that it does work and not some software bug.
Thanks,
Ed
Did you ever find the problem? My proximity sensor has stopped working also.
i am having an issue with mine too. at first i thought it was an issue with the screen not coming back on, but now i realize that the proximity sensor is not turning off the screen at all and my screen is just turning off when the screen timeout value is reached.
my phone is rooted, i have used titanium backup to freeze some of the apps associated with blur, and i have installed the hack to use webtop mode. can others that have this issue confirm if they are running stock or modified software?
***EDIT***
http://forum.xda-developers.com/showthread.php?p=12035170#post12035170
Any of you guys ever find a fix for this? I just noticed that mine is not working anymore either. It's rooted using aRoot but it was working for a while and now it doesn't anymore. I have another couple of days to exchange in store if I want to if it's a phone issue.
Crap, I'm having the same issue now too -- was working fine since I had it, but this occured just today, Day-2 of using 1.5.7 .... wonder if it's related ...
Crap, I'm having the same issue now too -- was working fine since I had it, but this occured just today, Day-2 of using 1.5.7 .... wonder if it's related ...
Reboot seems to fix this -- but annoying >_<
Is anyone that is having these issues using bluetooth? I have isolated mine to bluetooth and sent an issue report to Motorola.
same problem here but not using bluetooth
My wife's Atrix does the same thing. "dials or hangs up while in a call". She does not own a bluetooth headset and I have only connected a Motorola 305 one time to it. Reboot fixes the problem. Reboot seems to take forever when compared to my Dell Streak.
Ed Venture said:
Am I the only one having problems with the Proximity Sensor on the Atrix? I can't seem to get it to kick in when on a call. I have already dial-toned a couple of people when talking on the phone. I have tried covering up the sensor by placing the palm of my hand over the to 1/2 of the phone and it never kicks in.
Can someone verify for me that it does work and not some software bug.
Thanks,
Ed
Click to expand...
Click to collapse
Had the problem with mine when I installed a different launcher had to delete it and restart the phone now it works ....for me anyways
Sent from my MB860 using XDA App
Hi I believe I traced the problem with the proximity sensor not working to Handcent SMS. On two separate Atrixes, as soon as I uninstalled Handcent and rebooted the phone the problem went away and stayed away. I have since installed GoSMS and now it happens just sometimes (usually after I install a new app) but a reboot after installing an app ususlly fixes it.
My Phone has a standard Telstra (Australia ROM) and is not unlocked or modified in any way.
Ed Venture said:
Am I the only one having problems with the Proximity Sensor on the Atrix? I can't seem to get it to kick in when on a call. I have already dial-toned a couple of people when talking on the phone. I have tried covering up the sensor by placing the palm of my hand over the to 1/2 of the phone and it never kicks in.
Can someone verify for me that it does work and not some software bug.
Thanks,
Ed
Click to expand...
Click to collapse
hi, you can try this
open /system/build.prop and add this
persist.mot.proximity.touch=1
reboot phone
Seem that i have this problem on my atrix,when i calling someone,the screen turn off immediately and the led on proximity sensor just keep turn on when i stop calling,i cant imagine this atrix have a lot a lot hardware problem
Sent from my MB860 using Tapatalk 2
If you are using unlocked bootloader or if u have unlocked the dim using a code then u will have to disable the In Pocket detection and then try sounds crazy but worked for me.
Sent from my MB860 using xda premium
ranjithkumar1201 said:
If you are using unlocked bootloader or if u have unlocked the dim using a code then u will have to disable the In Pocket detection and then try sounds crazy but worked for me.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
care to share how?
Similar issue
Just installed latest stable build onto my Atrix 4G, everything seemed fine last night, although I was using phone with bluetooth, this morning get a call, answer, screen goes dark, red proximity light comes on, and I can hear no sound, [later on the caller said he could hear me fine].
Phone would not wake up right off, and when it did it I still could not hear caller.
Been screwing around with settings all morning to no avail, discovered that the phone will only work with bluetooth device connected. without bluetooth the device goes dark, cannot wake up, have to hard reboot, with bluetooth and volume button awaken enabled, it performs normally, so possible connection to issues in post with proximity but with a bluetooth twist...
12as2005 said:
hi, you can try this
open /system/build.prop and add this
persist.mot.proximity.touch=1
reboot phone
Click to expand...
Click to collapse
Did that...... Does nothing much....
12as2005 said:
hi, you can try this
open /system/build.prop and add this
persist.mot.proximity.touch=1
reboot phone
Click to expand...
Click to collapse
Worked for me!!!
Stock rom with, root, atrix tweaks installed.
Thank's a lot!!!
Do any of the ICS ROMs available on XDA have Voice Command that will work with a BT headset?
Or has anyone found an app that enables you to voice dial from a BT headset? I've scoured the forums and haven't found a solution that works for my AT&T Galaxy S2.
I'm running Serendipity and it doesn't have it. I've also tried Vlingo and Cyberon without success. Shocking that Google wouldn't carry voice command over from GB!!
I just found a vlingo apk that is really the Samsung Voice Command from GB ported to ICS. It works well.
I've attached it for those interested.
I think that was something samsung messed up, not sure though
Sent from my SGH-I777 using Tapatalk 2
Follow up for Voice Command
I have been testing the Voice Command apk I attached in my previous post and it works well except for one fairly big problem. Voice Command doesn't work when my phone's screen is off. As soon as I turn on the screen by pressing the Power button (but with the lockscreen still on), VC works fine.
Any ideas?
drjim said:
I have been testing the Voice Command apk I attached in my previous post and it works well except for one fairly big problem. Voice Command doesn't work when my phone's screen is off. As soon as I turn on the screen by pressing the Power button (but with the lockscreen still on), VC works fine.
Any ideas?
Click to expand...
Click to collapse
Unfortunately I don't have any ideas...I'm in the same boat. I'm using the samsung VC app (pulled from sammy ICS - I posted it up for someone, somewhere a while ago) on Task/Ktoons AOKP. It works perfectly fine launching from the BT headset button if the screen is on, but it won't wake the screen - I haven't been able to get it to work on any custom ROM actually...
Hmmm...now that you brought this up, I wonder if it's possible to integrate this into a tasker profile to make the BT headset button wake the screen, then launch VC?
Thanks for getting me thinking...guess I have an idea after all...
dandrumheller said:
Unfortunately I don't have any ideas...I'm in the same boat. I'm using the samsung VC app (pulled from sammy ICS - I posted it up for someone, somewhere a while ago) on Task/Ktoons AOKP. It works perfectly fine launching from the BT headset button if the screen is on, but it won't wake the screen - I haven't been able to get it to work on any custom ROM actually...
Hmmm...now that you brought this up, I wonder if it's possible to integrate this into a tasker profile to make the BT headset button wake the screen, then launch VC?
Thanks for getting me thinking...guess I have an idea after all...
Click to expand...
Click to collapse
Glad I could get your gray matter moving!
Which BT headset are you using (I just bought the Blueant Q2)? I was hoping that it wasn't just my headset, so I wouldn't have to return it.
Let me know if you can figure it out.
drjim said:
Glad I could get your gray matter moving!
Which BT headset are you using (I just bought the Blueant Q2)? I was hoping that it wasn't just my headset, so I wouldn't have to return it.
Let me know if you can figure it out.
Click to expand...
Click to collapse
Well, digging around in tasker, it appears it does not have a Bluetooth button trigger. Or if it does, I'm looking in the wrong place for it. I haven't actually tried, but it appears to be possible to force the phone either to screen off awake state, or full screen on awake upon bt connection. This would at least automate the process upon initial Bluetooth connection followed by an immediate call. Doesn't fix the problem of a user wanting to initiate a call on a stable idle connection though... gonna keep digging a little more.
I'm using an LG headset I got for 6 bucks from newegg 2 years ago. More reliable and better battery life by far than the 2 previous 70 dollar motorolas...
Edit: LG hbm-235
Sent from my SGH-I777 using Tapatalk 2
keep at it!
dandrumheller said:
Well, digging around in tasker, it appears it does not have a Bluetooth button trigger. Or if it does, I'm looking in the wrong place for it. I haven't actually tried, but it appears to be possible to force the phone either to screen off awake state, or full screen on awake upon bt connection. This would at least automate the process upon initial Bluetooth connection followed by an immediate call. Doesn't fix the problem of a user wanting to initiate a call on a stable idle connection though... gonna keep digging a little more.
I'm using an LG headset I got for 6 bucks from newegg 2 years ago. More reliable and better battery life by far than the 2 previous 70 dollar motorolas...
Edit: LG hbm-235
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Please keep at it!
I didn't really grasp what you are talking about, but I'll take your word for it.
BTW, I did a search on appbrain for 'screen timeout' as I thought there might be something useful to you. Here's the link:
http://www.appbrain.com/search?q=screen timeout
I have this issue with my S3, that is infuriating! Whenever I get a call and answer it, my screen turns off after a short while and during the call I can't turn it back on. The power and home buttons do nothing, and the proximity sensor isn't working either, so I can't turn off a call.
Anyone know how I can fix this? I have Lollipop, CyanogenMod 12.1 custom ROM installed.
Thank you for your time.
This bug partially exists in stock roms too. It's just magnified in custom roms.
You should be able to set it to keep the screen on during calls. It's the only way i know of.
I fixed this problem by opening up the phone, unplugging the proximity sensor, and throwing it in the bin. (the trash to you Americans)
Screen stays on during calls now, but I've not had problems with accidentally ending calls with my face, so I'm happy.
You also lose your front camera because it's part of the same tiny PCB. But I've never used the front camera on a phone in my life. So my solution is perfect for me, but maybe not for you.
The other option is a software fix. There's an app, or a method that you can do yourself to disable the proximity sensor, but I had problems with it, so did it my way.
Edit: I forgot to mention that the reason my proximity sensor wasn't working was because whoever had this phone before me did a screen repair and had half severed the ribbon cable for the proximity sensor by accident. Not just because of the bug that sometimes exists.
Sent from my GT-I9300 using Tapatalk
Proximity sensor problem. Manually calibrating it solved the issue for me.
http://forum.xda-developers.com/showthread.php?t=2569141
Go to that thread and follow instructions. The code for sensors might be different for s3, Google it.
sashankps said:
Proximity sensor problem. Manually calibrating it solved the issue for me.
http://forum.xda-developers.com/showthread.php?t=2569141
Go to that thread and follow instructions. The code for sensors might be different for s3, Google it.
Click to expand...
Click to collapse
Bah, that's the boring way to fix it.
(didn't work for me. maybe work for OP though)
Sent from my GT-I9300 using Tapatalk
I remember that I saw a MOD or xposed module to keep screen on during call.
It's better than throwing the sensor to the bin (trash ) .