Hi every one. After many days, finally my replacement lcd arrives to home (I broke my lcd and need to change it). I found thi video who shows how to disasambling the HTC Diamond 2, but the htc pure have some differences. I Just remove the 2 superior screws but i cant remove the inferior screws because i cant remove the inferior cover of the back cover. May some one tell me how can i do this? I attach one image to show what i try to say. Thanks in advise.
cmon guys, some one must know anything about it.
i tried to remove it with force but i only damaged it
sorry for the damage man, i ll try to remove it too and now i made some scratches in the cover...
I'm not sure if the T-Mobile and AT&T are the same but perhaps you should try to check if this works for you:
http://forum.xda-developers.com/showpost.php?p=6279887&postcount=50
Thanks for the reply Musik, i will check it out.
I confirm this works!!!!
http://forum.xda-developers.com/show...7&postcount=50
Thank you so much Musik, now i can change my broken LCD
now i can finally change thye housing lol
Redlime said:
now i can finally change thye housing lol
Click to expand...
Click to collapse
yeah, me too. Now everyone knows how must to be done.
Related
hello I think i am inned of a new digitizer and i have a few question. the bottom center of the screen does not work any longer. I have tried everything possible.
1. does anyone have a good reputable source pref not too expensive.
2. are there any vids on taking it apart available.
3. any tips (everyone seems to always have the right answers on here!!!)
thanks.
j.b
raggaman said:
hello I think i am inned of a new digitizer and i have a few question. the bottom center of the screen does not work any longer. I have tried everything possible.
1. does anyone have a good reputable source pref not too expensive.
2. are there any vids on taking it apart available.
3. any tips (everyone seems to always have the right answers on here!!!)
thanks.
j.b
Click to expand...
Click to collapse
ok bro i have def taken apart the digi.. but its not all the problem comes down to.. its almost like the lcd and digi are in sync.. so my best recommendation is to buy a lcd that comes with the digi.. i have had to replace mine already.. honestly its better to get both due to the fact that it is soooooooo hard to sperate the lcd and digi.. i have pics in detail on how to take apart the phone and can edit the text to help removing the lcd to replace.. just pm me if you need help k.. i have taken my wing apart like 20xs and will again once i get my new nice black htc housing lol!! pm for help k.. more then willing to help no matter what!!!
hey iphone, have you ever replaced the wing's front button keypad before? you got any tips on how to install it in? that is, if you know how.
XZACT said:
hey iphone, have you ever replaced the wing's front button keypad before? you got any tips on how to install it in? that is, if you know how.
Click to expand...
Click to collapse
Ya bro!! I just replaced my entire housing.. I am no longer labeled as tmobile.. 100% HTC.. Its the black housing.. I have taken my pda apart a million times lol.. I have pics on taking it apart due to someone else asking how to replace the housing.. I can email you the same illustration if you would like.. Just pm me k.
You should take a look here:
http://www.dealextreme.com/details.dx/sku.14919
It's the cheaper one you'll ever find, i haven't tested it myself so i can't be sure about the quality of the item, but everything i've ordered from dealextreme has arrived to me ok.
le_hades said:
You should take a look here:
http://www.dealextreme.com/details.dx/sku.14919
It's the cheaper one you'll ever find, i haven't tested it myself so i can't be sure about the quality of the item, but everything i've ordered from dealextreme has arrived to me ok.
Click to expand...
Click to collapse
Just so you know, this is only the touch screen + digitizer. It does not come with the LCD. Now I have one for sell for $5 shipped, if anyone wants it let me know
Has anybody tried to disassemble a Legend yet? Are there any pictures of the insides below the top plastic cover on the backside?
There are some pictures at mforum.ru but there are not shots of the most interesting part - just the aluminum case before and after.
Sorry I'm not allowed to post the link but google for "HTC Legend no disassemble".
disassemble htc legend
I have disassemble my htc legend
disassemble htc legend
disassemble htc legend
How brave you are!!!! By the way, how have you dismantle it??? I can´t see screws in the upper side??
Cool, thanks!
I guess you need to lift up both plastic covers to get to the screws.
Hi, show us how did you do it, please..
great pictures shown there!!
can i confirm if the wifi antenna and the gps antenna are located on the top plastic (camera area) while the phone antenna is on the battery cover??
or are the wifi and gps antennas all the same, located on the battery cover??
thanks for the answer in advance.. haha.. this can help me decide what areas to hold on to the phone for specific tasks..
Hi guys ..
I cracked my screen .. brought new spareparts, I really need tips how to disassemble the camera section to replace the screen..
Whick tools do i need?
Regards
Lasse
Tools
The first time I took it apart I used what I had, I just had to grind the tip of the scalpel, and it worked. But now I have invested in a tool kit.
Have fun…
tool......
tool......
some more photos
some more photos
Very nice .. thx!!
i've just opened the camera area .. How do I "push" the phone backwards and the rest of the way out?
Will post pictures in a second ..
hmm .. it is not possible to post links to my pictures outside this forum yet ..
Admin - please verify ASAP !
You have to push on the phones bag side to get the display forward and up, be careful not to bend the metal by the microphone in the top.
I really dont know how to get it out the right way..Piece of S***!!!!
did you fix your screen?
I have the same problem, and wouldnt mind knowing how to dismantle it and replace the screen.
Hy guys.... i have to cange my screen because it is broken.... I want to change it by myself and i want to know if i have to calibrate the touch after i will replace it...
Thanks a lot
My brother also has a cracked screen. Would be very helpful if someone was able to perhaps show how to change it?
Please guys help me.... i love this phone but i can't use it with the cracked screen.. if someone change the screen please post his work or let me know if i have to calibrate the screen... thanks a lot and please HELP ME........
Ehi porscherolf79, probably you have a new job.
made to send the Phone and the screen for the substitution
I'm a simple amateur. Please, don't criticize my rustical methods. I did the best I could.
I could'nt separate the screen from the housing: too tight!! (I bought the two pieces and I replaced both)
Hope it helps someone
Nice Thanks mate!
dejx said:
Nice Thanks mate!
Click to expand...
Click to collapse
Thanks to you dejx
165 views and only 1 agreement... sniff, sniff
Nice Video.
Hopefully I will never need to take mine apart.
And here you are the reassembly.
Look in first post
you're welcome
Nice stuff
I'm gonna follow your video as a guide next time I change the housing.
Thanks!
How about Dust isn't there a risk of having dust stuck between the digitizer and lcd? isn't it the same risk as in aplying screen protection. I tried several time aplying screen protector but never succeed without having dust particle stuck in between even though it's allmost unnoticable.
What's your experiance in this ?
jpfa said:
How about Dust isn't there a risk of having dust stuck between the digitizer and lcd? isn't it the same risk as in aplying screen protection. I tried several time aplying screen protector but never succeed without having dust particle stuck in between even though it's allmost unnoticable.
What's your experiance in this ?
Click to expand...
Click to collapse
That's what I feared and that's why I put on the gloves and I was careful to clean the internal part of the screen before the assembly.
It may be a very small particle of dust, but I can't really see it.
Very nice tutorial. I guess i have to change my digitizer too sometime in the future because it has a defect (these newton rings) and i dont know how long it will work with this defect. I'm sure your videos will help me.
Eyghon said:
Very nice tutorial. I guess i have to change my digitizer too sometime in the future because it has a defect (these newton rings) and i dont know how long it will work with this defect. I'm sure your videos will help me.
Click to expand...
Click to collapse
I hope it helps you too. Ask me if you have any doubt. I will try to help you if I can
Great HowTo, thanks!
Thanks!
Nice tutorial, hope I will never need it.
Was the reassembled phone fully working at the first time or did you need some further tries.
Thanks, nhedgehog
nhedgehog said:
Nice tutorial, hope I will never need it.
Was the reassembled phone fully working at the first time or did you need some further tries.
Thanks, nhedgehog
Click to expand...
Click to collapse
The device works ok. At the beginning I had to realign the screen. Few days ago I realized that the screen had the oil stain (the device was working perfectly), and I made it disappear with a tape.
what if the part I purchased doesn't come with the metal surrounding. Only the glass do you use glue to stick it on the chassi ? any tips on this issue before taking my phone apart ? or you recomend to send back the glass and get the whole front? Thank for the video it must have taken you some time to edit.
jpfa said:
what if the part I purchased doesn't come with the metal surrounding. Only the glass do you use glue to stick it on the chassi ? any tips on this issue before taking my phone apart ? or you recomend to send back the glass and get the whole front? Thank for the video it must have taken you some time to edit.
Click to expand...
Click to collapse
I heard that many people has broken the original digitizer trying to separate it from the housing.
That's why I bought both pieces.
But I also heard that is possible to separate them, being very careful. But it's a risk. And I heard too that you can use any kind of glue, including the one we used at school.
I hope that I have understood your question.
Thanks for you greatefulness!
very usefull tutorial
I have bought me a touch diamond 2, with a pretty damaged housing
now I dare to try to replace it, thanks to you're tutorial
First, thank you for your useful guide, but i missed something.
What about the light sensor cover (it's at the opposite side of the power LED). Is it included in the new housing? Because i didn't find it on the new housing that I bought (may be because it is not an OEM?)
Thanx in advance!
blackice666 said:
First, thank you for your useful guide, but i missed something.
What about the light sensor cover (it's at the opposite side of the power LED). Is it included in the new housing? Because i didn't find it on the new housing that I bought (may be because it is not an OEM?)
Thanx in advance!
Click to expand...
Click to collapse
Yes, my new housing has the other led.
I have tried to disassemble this led from my old housing but... I failed.
Sorry,but I can't help you with this.
Something72 said:
The device works ok. At the beginning I had to realign the screen. Few days ago I realized that the screen had the oil stain (the device was working perfectly), and I made it disappear with a tape.
Click to expand...
Click to collapse
How did you realign the screen? I tried to use the calibration utility but I it goes into an endless loop. tried to re-assemble but got the same result
Any ideas what might be wrong?
voxter said:
How did you realign the screen? I tried to use the calibration utility but I it goes into an endless loop. tried to re-assemble but got the same result
Any ideas what might be wrong?
Click to expand...
Click to collapse
Sorry, voxter.
I realign the screen using the app included in settings (Settings > System > Screen > Align Screen).
I read in other thread that you tried without success (just endless bucle). I had endless bucle too in another ROM. But after two or three times I made a soft reset and the screen begun to work perfectly.
Now I have a Tess ROM and only asked me to repeat it twice. After that, the screen works perfectly.
It's all that I know about it. Hope it helps
Hello.
Can someone upload a video showing how to change the housing cover of the Xperia S, or tell me how to do it?
I dropped my phone and now its got a chip on one of its corners which I want to remove immediately.
I have damaged my xperia s too
i know where to buy a housing kit from but, im too scared to just dive in and dismantle my device... I have had a look at the disassembly guide but it doesnt really talk about talking the screen off or anything.
Really interested in this please get back to us :fingers-crossed::good:
try this http://www.google.lk/url?sa=t&rct=j...c-DIh0CkFmDc-WGEA&sig2=gGc6TPAOiiffeZ7I6n967g
gm007 said:
try this http://www.google.lk/url?sa=t&rct=j...c-DIh0CkFmDc-WGEA&sig2=gGc6TPAOiiffeZ7I6n967g
Click to expand...
Click to collapse
Thanks, that would be helpful.
It says in the manual, when we remove the bottom cap, "scrap, not to be reused". Is it talking about the bottom cap? Will I have to buy a new cap once I remove it ?
U can reuse it but be careful not to broke it
Sent from my Galaxy Nexus using Tapatalk 2
I ordered a screen/digitizer assembly to replace mine because its cracked. I didn't want to disbond the digitizer so I ordered the whole assembly.
When I installed the new. assembly, the screen wont come on and the phone wont boot. Here is where thing started to get interesting:
1. Boot the phone with the old screen assembly and wait until the home screen shows then turn off screen.
2. Disconnect the old screen at this moment and connect the new one while the phone in sleep mode.
3. push power button to wake screen and its working and fully functional.(New one)
If I tried to reboot the phone the new screen wont come back on again. I also tried to reset and RUU and it still wont work.
Please let me know if you have any suggestions. I am in the process of returning the screen and getting another one, but i am still worried if I will be going through the same issue. One thing I didn't like about the phone is the cheap trashy components. So easy to brake and not made to be worked on.
I think I found the problem.
Well. Taking a closer look at the ribbon cable for the LCD and it appears to be the same color, but if you follow the lines, it does not look the same. I am currently waiting on a screen from a different seller and hoping to be the right one. I will keep you updated as I go forward.
Too many views, but no comment. I just hope this post going to help someone in the future. Keep in mind that sellers doesn't specified the kind of the LCD which is creating the troubles.
I am going to attach some photos to make it little clear. Keep in mind that I have HTC One for AT&T USA.
Did you ever replace the screen? I need to take mine apart and put a new battery and USB port in it. I'd like to know how pulling the screen went for you, if it was done.
xartic12 said:
Did you ever replace the screen? I need to take mine apart and put a new battery and USB port in it. I'd like to know how pulling the screen went for you, if it was done.
Click to expand...
Click to collapse
Not that good. I watched a YouTube video that helps a Little. You have to be really careful. Watch it and let me know if you need any additional help. Removing a broken screen not that bad since its broken. Be really careful when you order your new screen because I am having trouble to fine the right one. Mine PN: 60H00741-00P . There are many PN: 60H00742-02M that aren't working for me.
Forgot the video links
To disassemble : http://www.youtube.com/watch?v=qZFAsgjCunc
To reassemble: http://www.youtube.com/watch?v=S5KNmDeJ4Ww
medoo313 said:
Not that good. I watched a YouTube video that helps a Little. You have to be really careful. Watch it and let me know if you need any additional help. Removing a broken screen not that bad since its broken. Be really careful when you order your new screen because I am having trouble to fine the right one. Mine PN: 60H00741-00P . There are many PN: 60H00742-02M that aren't working for me.
Click to expand...
Click to collapse
The problem I have isn't the screen, but rather the battery and the USB port.. I have found both for about $20 each, but just didn't want to trash a basically brand new HTC.
Did you use a suction cup or pry it out?
xartic12 said:
The problem I have isn't the screen, but rather the battery and the USB port.. I have found both for about $20 each, but just didn't want to trash a basically brand new HTC.
Did you use a suction cup or pry it out?
Click to expand...
Click to collapse
I used a plastic sharp tool and you need to find the spots where you have to press on it to get it released. If you look at the first video, you will see where he marked it. those are the lock tabs that hold the assembly. The worst could happen is you may put a few dents in the plastic frame. You can order this part for around $20. A suction cup may works for you as well. Consider giving it little heat to lose the adhesive. Let me know if you still have any further questions.
Good luck
Where to get the right LCD in USA
I finally found a good supplier in USA for the proper kind of LCD. I spoke to him on the phone and I sent some pictures of my LCD. He has LCD part number 60H00741-00P that I been looking for. The website is https://www.gounlock.com/ If you ever call, ask for Jacky.