Related
I tried searching for a how-to on this but apparently I'm searching inclined.
From what I can gather is it as simple as just dumping the zip onto the root of your SD card and doing:
3. Make sure phone is off then hold Power button and Call Button.
4. The menu opens quickly press the power key over the hboot option.
5. Follow onscreen instructions to install the update. the phone will reboot a few times.
you dont even need to search. go to the development section and then look at the top few, it will have very detailed instructions.
I guess I should have elaborated more and said I don't have my phone rooted and really don't want to go that route. I was just getting confused because everything i was finding on here was people running root but I came across a few things where people said the 2.1OTA Leak was just a straight upgrade, so that is my confusion.
Are you asking how to install the 2.1ota leak? Just flash it onto your phone?
Curious, why do you not want to root your phone?
Root is much more flexible, and there are roms that are based off that leak. If you're worried about your warranty, it's going to void it either way, lol.
Good luck !
rheally said:
Are you asking how to install the 2.1ota leak? Just flash it onto your phone?
Curious, why do you not want to root your phone?
Root is much more flexible, and there are roms that are based off that leak. If you're worried about your warranty, it's going to void it either way, lol.
Good luck !
Click to expand...
Click to collapse
but if you have root you can do the downgrade back to 1.5
Android22 said:
but if you have root you can do the downgrade back to 1.5
Click to expand...
Click to collapse
Oh right, I forgot about that, duh It just seems like root would be a better choice.
But to each his own.
rheally said:
Are you asking how to install the 2.1ota leak? Just flash it onto your phone?
Curious, why do you not want to root your phone?
Root is much more flexible, and there are roms that are based off that leak. If you're worried about your warranty, it's going to void it either way, lol.
Good luck !
Click to expand...
Click to collapse
yeah that is my question, can 2.1OTA just be flashed or does your phone need to be rooted?
I just feel like with root I'll be more likely to kill the phone but I'm going to check into it more again.
If you flash the 2.1 OTA leak onto your phone you CANNOT root your phone. It hasn't been figured out yet.
Root really isn't that hard to do. There are several threads over in the development forum.
rheally said:
If you flash the 2.1 OTA leak onto your phone you CANNOT root your phone. It hasn't been figured out yet.
Root really isn't that hard to do. There are several threads over in the development forum.
Click to expand...
Click to collapse
yeah I was just reading the thread on going from stock 1.5 to rooted 2.1. Can you give me some of the major benefits of rooting? I'm trying to find really practical stuff, not just the "Well it's cool cause it's like being root in Linux".
And just to clarify you can just flash to 2.1OTA? I'm skeptical of doing that now because I was reading some people think 2.1OTA has a time sensitive date on it.
Future developments will likely be easier to impliment if you root. The ability to run different (and potentially more stable) ROMs. Support for future software not designed for the Eris. Post rooting you can also make Nandroid backups and as long as you don't somehow screw your bootloader you can actually fix your phone.
Also, and this is pure speculation, should Verison decide to discontinue support for the Eris entirely, non-rooters may have issue getting new Android versions since they're limited to signed code.
EDIT: there is also little reason NOT to root. It does everything that you can do unrooted and more. All this plus the fact that you may never be able to root again but could always unroot at your leisure.
Marisa said:
Future developments will likely be easier to impliment if you root. The ability to run different (and potentially more stable) ROMs. Support for future software not designed for the Eris. Post rooting you can also make Nandroid backups and as long as you don't somehow screw your bootloader you can actually fix your phone.
Also, and this is pure speculation, should Verison decide to discontinue support for the Eris entirely, non-rooters may have issue getting new Android versions since they're limited to signed code.
EDIT: there is also little reason NOT to root. It does everything that you can do unrooted and more. All this plus the fact that you may never be able to root again but could always unroot at your leisure.
Click to expand...
Click to collapse
Can you point me to a good nandroid tutorial? tried searching for one but if you know of a good one I'd appreciate it.
I was trying to find a nandroid guide when I did it the first time, but once I discovered that Amon_RA's recovery has it built-in, I decided to wing it and see what happened. It was a lot easier than I expected to be honest.
Reboot your phone into recovery (VOL UP + Power), you should have a short list of options, one of which should be Backup/Restore. Trackball into it and select to make a backup. Let it do it's thing, should take a few minutes. Congratulations, you've made a backup of your phone. You can make as many as you like, they're given names based on the date and time they're created, but you can rename without harm (barring a few characters keep it A-Z a-z 0-9 and you should be good)
Restoring to that backup is as easy as entering the same menu but picking restore instead. You need to have made a backup first in order to restore something.
NOTE: I've written all this by memory, and while it should be fairly accurate, I can't turn my phone off currently to double check that the wording is all correct.
I'm a bit confused on the Amon thing. I found the the link here http://forum.xda-developers.com/showthread.php?t=648025
Do I just dump that IMG file onto the root of my SD card and that's it? Will it know to always use his recovery or do I need to do more?
I have an application that I write to make going from 1.5 to root a lot easier with a gui application. It will be released very soon for everyone to use. Take a look at my thread for more info. Link is at the top of my signature.
Sent from my Eris using the XDA mobile application powered by Tapatalk
frankspin said:
I'm a bit confused on the Amon thing. I found the the link here http://forum.xda-developers.com/showthread.php?t=648025
Do I just dump that IMG file onto the root of my SD card and that's it? Will it know to always use his recovery or do I need to do more?
Click to expand...
Click to collapse
If you followed Ivan's guide to the very end, you already flashed Amon_RA's recovery to your phone. To enter it, shutdown your phone and then hold volume up and the call end button (power), you should boot into the recovery.
Marisa said:
If you followed Ivan's guide to the very end, you already flashed Amon_RA's recovery to your phone. To enter it, shutdown your phone and then hold volume up and the call end button (power), you should boot into the recovery.
Click to expand...
Click to collapse
AWESOME! Thank you I am doing it right now.
NM: got it
Well I got 2.1 on but I did something wrong and can't load rooted 2.1. I get "signature verification failed" message when I load the zip file.
Hi, i am new in this forum so I may be like the noob you guys talked about in the first video, also i am not american so sorry for my english.
Yesterday i decided to play around with my phone, an optimus one with official rom froyo. I rooted it and then unrooted it because i realized that the official gingerbread room was out. After a few unsuccesful attempts of updating it from kdz (emergency mode, unplugged, took off battery, almost crying for my phone) when I turned it on it was okay, running gingerbread 2.3.3
I downloaded the rom from this website http://androidve.com/2011/05/como-instalar-software-original-en-lg-optimus-one-kdz-oficial-digitel-en-exclusiva/ and I thought everything was fine until the moment i realized that it wasn't what i expected. I wanted to install this rom because of a video I saw in youtube and i followed the link and it took me http://forum.xda-developers.com/showthread.php?t=946354. I read the thread and some of its post and decided that i want that rom.
Now, i have gingerbread and i know it can be rooted in a way i dont know anything about, i want to learn it. But my question is... If i already have gingerbread, do i need to downgrade to froyo to install the cROM of mik? or can i do it directly from a rooted gingerbread? if it is possible, can you please guide me on how to do it or give me a tutorial? I already looked for them and actually found some of them but because of the incidente of the last day i am scared of trying this stuff alone and i would really aprreciate your advice.
Thank you. (Sorry for the essay :S)
There are already threads on how to do this. Also if you are to flash mik's rom then you have to flash old baseband since you have official gingy.
http://forum.xda-developers.com/showthread.php?t=1142105
After rooting to install a custom rom download rom manager from the market, choose rom from sd card, then choose backup rom and wipe data and cache. Then flash all neccessary zips you need after install.
Sent from my LG-P509 using XDA App
thanks for answering.
In adb (this means in cdm/total commander mentioned in Link 1 at "How to Use ADB"):
adb devices
adb shell
echo 1 > /data/local/lge_adb.conf
After that open SuperOneClick and root using pneuter. Reboot phone and update Superuser from Market.
Click to expand...
Click to collapse
Ill follow that, but where can i get superoneclick and pneuter?
I am guessing that to flash is to install, how do i do that? like an app from the sd?
Abrahamz said:
thanks for answering.
Ill follow that, but where can i get superoneclick and pneuter?
I am guessing that to flash is to install, how do i do that? like an app from the sd?
Click to expand...
Click to collapse
Super1 click:
http://forum.xda-developers.com/showthread.php?t=803682
Psneuter is just the method process to root(select in super1 click)
To flash things go to rom manager and choose flash clockworkmod recovery.After that any thing you need to flash can be done easily in recovery.
Sent from my LG-P509 using XDA App
i ve done it and its all perfect except for the fact that i dont have service could you please help me, i had read something about updating radios and some stuff but i dont know what that thing is, i am wondering if that has something to do with the vpn.
Please help me
You need to flash new baseband patch here:
http://www.multiupload.com/R9CEDO2HS9
Put zip on sdcard then go to rom manager and select boot into recovery
In recovery select install zip from sdcard, select the baseband fix and choose yes to install.
Sent from my LG-P509 using XDA App
Man almost everyone on this site is rooted.... im just to scared of bricking my phone!
I was scared too, but after a few near-brick experiences i decided to give it a try. I even decided to go back to gingerbread with root because i wasnt able to call and all that stuff, and i was really freaked out when i was looking for a way to go back because my questions was not completely answered and i felt insecure. So i decided to give up for a while and then i realized i had made a backup from my ''gingy'' with the rom manager, and i thought it would restore my data and all that stuff but it actually took me back to gingerbread which was a relief for me.
Now that infiniterisen gave me the answer to my signal/service issue, i might try to do it again, because even though i was really scared while checking that i had no service, my android looked really cool and was smooth as baby skin
I cannot tell you to try to root it because if something goes wrong you would be completely free to blame me and because i am also new to this scene, but it is really cool and i personally like to try new stuff (even though i may cry if my O1 gets bircked)
Hello all,
I have a Droid X2, running 2.3.4.
Currently, the phone is acting very buggy, randomly shutting off, and the wifi won't turn on.
I am attempting to install a new rom on it to see if this fixes the issues, but I am running into great difficulty without the wifi ability.
I am using the method of installing the apk via adb and the command prompt
Installed all the necessary drivers, SDK manager, etc., downloaded the rom manager lite apk, and attempted to install it to the phone, but when I run the command prompt, it comes back access denied, in that I don't have permission to install it. Is there any way around this, or how to to grant it permission?
My end goal is to throw a new rom on the phone to see if it fixes the issues.
Thank you!
I dont understand the method you are trying to use to get a ROM on your device. What apk are you trying to install? You need to root your device before anything. Follow the directions here:
http://forum.xda-developers.com/showthread.php?t=1315711
Once you are successful with that, you can choose a ROM and install it with bootstrap recovery. Get your phone rooted first though and then we will take it from there.
Alright, well first problem is that ROM Manager does not work for our phone. You can only use the DX2 bootstrap (or modified BSR if you're on CM7) to get into the custom recovery. I'd recommend downloading that and storing it somewhere on your SD card, though most ROMs now have it baked in some older versions may not.
BUT, before you can do this, you must have your phone rooted. Since you are getting permission errors, it would appear you're just trying this all on stock 2.3.4, so I'd recommend reading Moon Shadow's guide on rooting.
After you have rooted your phone and installed the BSR you can delve into installing custom roms. As long as you have a computer with internet access and a usb cable you can just download the rom onto your phone and transfer it to your phone's SD card, no need to use ADB to push it. It's also recommended you make a nandroid backup before you install any ROMs/mods.
TL;DR - ROM Manager does not work for the Droid X2. Need to root it, then install the DX2 BSR before any ROMs can be installed.
PS - For future reference, questions like these would be best placed in the Q&A section.
Thread moved. Please post questions in Q&A forums.
Thanks...
Thank you,
I will definitely look into the guide.
Sorry for the elementary stupidity of my question.
I use iOS, so Android is a bold new frontier
takyon42 said:
Thank you,
I will definitely look into the guide.
Sorry for the elementary stupidity of my question.
I use iOS, so Android is a bold new frontier
Click to expand...
Click to collapse
Yeah, just read the guides and you'll be fine. Start with rooting your device and any other questions you have, we will try to do our best to answer them. Android is a lot different than iOS so everything you knew about that then forget it. lol
takyon42 said:
Thank you,
I will definitely look into the guide.
Sorry for the elementary stupidity of my question.
I use iOS, so Android is a bold new frontier
Click to expand...
Click to collapse
We got another one!!
**** yea!
You were kickin it hardcore going into command prompt and trying to load everything. I've never heard of that being done. We have a couple people around here that are great at reconfiguring permissions. Moon and a couple others are great at it. But there are much easier ways of flashing roms and solving some problems. But whatever floats your boat man, if you can work everything through Prompt then more power to you.
Ok. I have at&t Samsung galaxy note i717. Earlier today I manually updated the software to jelly bean 4.1 and also unlocked it by following a YouTube video. Now. I have downloaded a few things, such as SU, CWM, titanium backup, twrp, and I think that's it. I barely know what any of these things do. I have already deleted all bloatware from my phone. I went to TWRP and I backed up my current settings to my sd card. I guess that's out of the way.
I am asking if anyone can please explain in detail and retard terms, what precautions should I take before I figure out how to flash new roms and kernels, and if i backed up my phone correctly so if I screw up, I can restore my phone.
I need someone to explain to me what process I should take in order to keep my phone safe and secure, how to get a rom for saving battery... Do you need to connect to a computer to do this? Someone please explain to me how to use all of these apps and roms safely! Thank you
Dblx327 said:
Ok. I have at&t Samsung galaxy note i717. Earlier today I manually updated the software to jelly bean 4.1 and also unlocked it by following a YouTube video. Now. I have downloaded a few things, such as SU, CWM, titanium backup, twrp, and I think that's it. I barely know what any of these things do. I have already deleted all bloatware from my phone. I went to TWRP and I backed up my current settings to my sd card. I guess that's out of the way.
I am asking if anyone can please explain in detail and retard terms, what precautions should I take before I figure out how to flash new roms and kernels, and if i backed up my phone correctly so if I screw up, I can restore my phone.
I need someone to explain to me what process I should take in order to keep my phone safe and secure, how to get a rom for saving battery... Do you need to connect to a computer to do this? Someone please explain to me how to use all of these apps and roms safely! Thank you
Click to expand...
Click to collapse
Check Development area for roms. Read about them and figure which is best for you, And as far as flashing Roms TWRP is the best way to go
Dblx327 said:
Ok. I have at&t Samsung galaxy note i717. Earlier today I manually updated the software to jelly bean 4.1 and also unlocked it by following a YouTube video. Now. I have downloaded a few things, such as SU, CWM, titanium backup, twrp, and I think that's it. I barely know what any of these things do. I have already deleted all bloatware from my phone. I went to TWRP and I backed up my current settings to my sd card. I guess that's out of the way.
I am asking if anyone can please explain in detail and retard terms, what precautions should I take before I figure out how to flash new roms and kernels, and if i backed up my phone correctly so if I screw up, I can restore my phone.
I need someone to explain to me what process I should take in order to keep my phone safe and secure, how to get a rom for saving battery... Do you need to connect to a computer to do this? Someone please explain to me how to use all of these apps and roms safely! Thank you
Click to expand...
Click to collapse
My opinion. Dont mess with it. If its battery life you're looking for go to amazon and buy an extended battery.
Flashing roms and kernels without having some sort of idea what you're doing could completely brick(ruin) your phone.
dweeezy said:
My opinion. Dont mess with it. If its battery life you're looking for go to amazon and buy an extended battery.
Flashing roms and kernels without having some sort of idea what you're doing could completely brick(ruin) your phone.
Click to expand...
Click to collapse
Well, I already rooted my phone. It was pretty easy because I followed the steps correctly. And i don't want to buy a bulky battery, I also want to learn how to customize my phone.
I want to continue to research and learn about it so I don't hard brick my phone. I was hoping someone could at least explain the apps that I have downloaded. What each do. How to back up my phone settings to my sd card. Do I need each app that I downloaded, and when do I need to connect to a computer? When I go online and find a new rom and flash it over with Odin? I just want to know step by step process so I can learn this safely. Thanks
1 - Read the pinned threads at the top of the General section and the Q&A section.
2- Use Google.
Dblx327 said:
Ok. I have at&t Samsung galaxy note i717. Earlier today I manually updated the software to jelly bean 4.1 and also unlocked it by following a YouTube video. Now. I have downloaded a few things, such as SU, CWM, titanium backup, twrp, and I think that's it. I barely know what any of these things do. I have already deleted all bloatware from my phone. I went to TWRP and I backed up my current settings to my sd card. I guess that's out of the way.
I am asking if anyone can please explain in detail and retard terms, what precautions should I take before I figure out how to flash new roms and kernels, and if i backed up my phone correctly so if I screw up, I can restore my phone.
I need someone to explain to me what process I should take in order to keep my phone safe and secure, how to get a rom for saving battery... Do you need to connect to a computer to do this? Someone please explain to me how to use all of these apps and roms safely! Thank you
Click to expand...
Click to collapse
SU is superuser. its for rooted andriods. basically when you try to go into an app that requires root superuser is what will grant that app permission to do what it wants to do.
a rooted android must have su or it wont have root access.
cwm,titanium backup, twrp- The only one of these i use is cwm. clockwork mod is simple. a stock phone has its own recovery. power on while holding up/down vol's and it boots into recovery. cwm is a modded recovery that allows you to do more. you open it the same way as the stock one but from there you can backup your entire phone, -roms and all. the way to put it on your phone is to download the appropraite one for your android version and also download odin. when odins open click pda, find the file, start phone in download mode (vol down and pwr) and click start. now there are a ton of tutorials but thats the gist of it. now after its back up you can try to flash roms, kernels, etc. most of them will be flashed via odin some you will drag onto your sd card and flash them via cwm(the install zip from sd card option).
When it comes to flashing stuff on your phone nothing is 100% safe and a backup isnt always going to fix a problem you may cause. dont flash anything you havent done research on. read the entire forum to see what problems people had and how they fixed them.
Most downloads youll find have step by step instructions, follow them.
Good luck
i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/