ok so i have a tmobile tp2 and been having it since the first week it was released.
for the pass couple of days the call, home, and back buttons wont function like they need to.
also when i slide my keyboard up the screen goes completely black even when i close my keyboard, the only way to fix it somewhat is to keep pushing the sleep/wake button untill it turns back on.
my guess is that maybe something like a cable became loose and is causing it to have these problems, and i just wanted to hear what you guys have to say about it, or what you think the problem is and what you would recommend to fix it because i cant afford to buy a new phone for quite awhile.
Posting in the Accessories forum might not be your best shot at an answer.
lilchicano said:
also when i slide my keyboard up the screen goes completely black even when i close my keyboard, the only way to fix it somewhat is to keep pushing the sleep/wake button untill it turns back on.
Click to expand...
Click to collapse
Sounds like an app running to me. Even File Explorer (when searching the Windows folder) can cause my phone to hang for a long time. I would check in task manager to see if something is running. You can also try and app called "Clean Ram", it works great. The other option is a hard reset, to ruke out software issues. It could be harware, but I doubt it.
Miami_Son said:
Posting in the Accessories forum might not be your best shot at an answer.
Click to expand...
Click to collapse
Very true.
It's likely a loose cable as you presumed. Hopefully you still have time left on your warranty.
I hate to be the oen to say it, but it sounds like your ribbon cable is going.... My son had the same thing happen on his Kaiser/Tilt (Grandpa to this Phone)... It started like you said... then got worse over the matter of a few weeks... His screen woudl only work when it was closed... the buttongs on the screen housign stopped working properly... then his memorycard reader (it was in teh screen part on that phone) went nuts... got to the point where that phoen was basically useless... I hope that isn;t your problem, but it sounds like it..
Teej53214 said:
I hate to be the oen to say it, but it sounds like your ribbon cable is going.... My son had the same thing happen on his Kaiser/Tilt (Grandpa to this Phone)... It started like you said... then got worse over the matter of a few weeks... His screen woudl only work when it was closed... the buttongs on the screen housign stopped working properly... then his memorycard reader (it was in teh screen part on that phone) went nuts... got to the point where that phoen was basically useless... I hope that isn;t your problem, but it sounds like it..
Click to expand...
Click to collapse
yeah i can pretty much say that it is the cable since i could still slide my keyboard but the screen just looks fuzzy like and when i close it, it takes time to adjust back to normal. so basically now its just an all touch screen phone to me now... sort of sucks since i miss using the keyboard so much.
and yeah the buttons got worst now to a point where none of them worked but somehow the back button started working again so thats the only button that does work now.
and a new problem started occuring in the last few days, the screen would turn on by itself with even a slight bump around where the battery is located, it really sucks for me cause it kills my battery faster and it just starts opening up random apps while its in my pocket.
I would like to hear what finally happened. People don't forget we are using WM phones. So no matter what the problem, hard reset before deciding!
schumifer1 said:
I would like to hear what finally happened. People don't forget we are using WM phones. So no matter what the problem, hard reset before deciding!
Click to expand...
Click to collapse
wow super late response to this.
but my final verdict is that it was the flex ribbon cable that is the issue.
my TP2 doesnt even show anything no more, its still functional but you just cant see whats goin on with the screen because its like its turned off.
it stopped working on me on dec 25,2010 (what a great present from the phone, huh?) to how i described it.
so now im using my sisters old HTC dream, but even this one is starting to have an issue with the ribbon cable too! i just get bad luck with these phones now i guess.
edit: oh yeah i still have my Rhod210 just sitting on my desk till i get it fixed... oh how i miss my TP2!
Another late response then
Fixed it yet, have you?
this occasionally happens to my phone too, that it, the screen blanks out sometimes. the cause in my case is pocket lint. since it's hayfever season, i carry tissues in my pocket which kind of disintegrate to confetti after a while. while my tp2 is in my pocket, these tissue particles tend to get in behind the ribbon cable and cause some kind of blockage. by just blowing in around the ribbon cable area, it tends to clear out those fluffy bits and the screen is working again. so don't carry tissues in your pocket with your tp2
schumifer1 said:
Another late response then
Fixed it yet, have you?
Click to expand...
Click to collapse
i actually took the time to open up the touch pro2 all the way today for a full diagnosis on it, and i was right. it was the cable. where the cable is exposed when it tilts, it looks like it sort of got stripped around that area. im not sure how but it left part of the cable exposed which im guessing is whats causing it to have the issue. i was taking a couple of pictures as i was disassembling it, but i forgot to take a picture of the cable itself to show you what i mean. maybe ill disassemble it again tomorrow so i can take a pic! =)
but yeah im still using the g1, and i finally fixed it! (ended up bricking a g1 so i used the other as replacement parts on it) but hopefully not for long cause graduation is tomorrow for me, and i MIGHT end up getting a new HTC phone as a graduation present from the family. so i hope that does happen!
ok so i reopened the touch pro 2 and took a pic of the cable to show you what i ment.
Related
I'm having a weird issue with my vibrant. When I shake it turns off. I never had a problem with my phone before this is a first. Could it be a manufacturing problem? And if i take it to T-Mobile what could they do for me?
Only reasonable thing might be the battery moving, but thats weird...
lol... i find it funny sorry
so you just SHAKE IT and it turns off?
Yep, call TMOBILE tell them the issue, get a replacement, if its under 30 or is it 60? days you get a brand new phone, Vibrant.
If its over that, you get a REFURB, which MAY have problems, but if it does.. you just call em again and do the same thing for another Refurb.
There ya go.
I found it funny too. I know for sure they'll give me a refurb that I know I'll hate. TMobile will only give refurb replacements correct? Because I sure as hell would like to get a different phone from them. Using my phone as credit or something then paying off the difference if thats possible.
Shaking it and dropping it hard on a desk turn it off.
Stick a piece of cigarette pack alongside the edge of battery. Works every time.
Sent from samsung vibrant
Alex9090 said:
Stick a piece of cigarette pack alongside the edge of battery. Works every time.
Sent from samsung vibrant
Click to expand...
Click to collapse
Yes or roll a piece of paper tape to slightly bigger than the crack between the battery and the housing, then insert. This also can be done on the back should that be necessary--------
nicxus said:
I'm having a weird issue with my vibrant. When I shake it turns off. I never had a problem with my phone before this is a first. Could it be a manufacturing problem? And if i take it to T-Mobile what could they do for me?
Only reasonable thing might be the battery moving, but thats weird...
Click to expand...
Click to collapse
its like when someone goes to the doctor and says "Doc my arm hurts when i do this" and the Doc replied "then don't do that"
So my suggestion is Don't shake it.
Or just get a one of those extended battery gizmo. it may just do the trick.
Cheers!
LOL, I'm sorry but this is great. Can OP please add a pole of how many people actually started shaking their phone after reading OP. I did
Heres my results:
http://www.youtube.com/watch?v=T2RCwPrNpmc
Still werks!
As others have said, a folded piece of paper between the battery and the back case will fix you right up. I had the same issue ;-)
well i have an odd problem, one one section of my screen doesn't pick up touches, only the area where the "C" is on the keyboard...its annoying due to thats where the OK buttons are...
i can still navigate sense i can use the track ball..
anyone else have this issue, or something similar?
Try wiping back to factory if stock or reflash the rom if rooted?
I had a weird issue with the touch screen on condemned 18.3 where on the lockscreen trying to drawdown the slider and then draw the pattern, it would freak out and glitch and not follow my finger at all and take several tries to get the pattern correct.
I then wiped and flashed the latest 4.0 GSB and haven't had any issues since.
That's not quite a touch screen failure as yours is, but I thought it would help as an example as something gone wrong and how I was able to remedy it.
i've tried flashing a few different roms, went from cs18.3 to a 2.1 sense rom, back to the latest gsb. it appears its must be a problem with the digitizer...
really sucks, i have to wait to april to upgrade this phone...
might be on craigslist looking for a cheap droid 1...
Ah man, that's unfortunate. Probably wouldn't be worth it to try to replace the screen/digitizer either. Yeah, that's probably your best bet, looking to get another phone. That's how I got my Eris, from craigslist. Great way to go about doing so.
Good luck to ya.
I actually have the same problem and something leads me to believe that an update is causing this. I had it bad a few weeks ago (can't press C, V or X - though I can swipe to the keys sometimes) and then I got a few market updates for Handcent, SuperUser, and something else which then cleared it up for a few days. Then I got more updates and it's back to the failing keyboard!
I really don't know how to pin point it and I haven't done any resetting or testing yet, but I have like gut feeling something is wrong with the software, not the touchscreen since someone else is having this problem.
Mine has been failing little by little. Im now down to the top right corner, bottom left, and bottom middle not responding. It hard to even get the apps drawer to open. It all started with the letter C with me too. Just gets worse.
****, my whole qwerty row doesn't work, neither does the trackball. Upgraded to a SGS2, but I still tinker with the ol' eris.
mine moved, it started working fine for a few days, then just a smaller section to the left of C doesn't work, only really effects when i have an "OK" to press...but track ball still works and typing is so much easier now.
my wife thinks its because i dropped my phone that it started working again
I know this thread is a couple of months old, but...
There's an area on mine at the top right below the notification pull-down that appears to be dead. I'm thinking it's because I've dropped it about 10 times, but nothing looks wrong with the screen otherwise. I've thought about buying a replacement screen for about 15 bucks, but I'll be able to upgrade at the end of March, so I'm really just thinking about holding off (though if the new screen/digitizer worked, it'd make for a good mp3 player with the wifi script).
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
MBL85 said:
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
Click to expand...
Click to collapse
YMMV.
Someone gave me an Eris that had digitizer problems along the lower left side of the screen (in portrait orientation). I bought a replacement digitizer ($22 iirc), installed it, and it worked perfectly - for about the first 30 minutes. Then, the problem re-appeared in exactly the same location with the new digitizer.
Same behavior for a variety of stock or developer ROMs, so highly doubtful that it was a "software problem". Very very odd - the chip that does the capacitive sensing is on the flex circuit attached to the digitizer, so it gets replaced when you replace the digitizer; I suppose that the signals that come off the mini-connector between the digitizer assembly and the phone's mobo are only power, ground, and I2C signals.
But there you go; taken all those observations together, I'd suspect that I had a problem on the phone's motherboard which was thermally dependent.
Despite my (negative) experience, the odds are still in favor that a digitizer replacement will fix the problem; but there is an outside chance that it won't.
just sayin',
bftb0
So my bro's had an Atrix for a little over a year.
Some time back, it started exhibiting this behaviour where the whole screen would just become totally unresponsive.
Searching around, I see issues where people lose responsiveness with a fraction of their touch screen, or the entire screen starts spazzing out with all these presses and swipe actions the user did not enter...
...but his just seems to have these periods. He'll be stuck at the lock screen from anywhere between 1 minute and a whole day... I can usually get it to work with random rapidfire hardware commands... and when it works, it works completely for a certain amount of time.
Thing is, that's only temporary, and the touch-screen ends up going back to an unresponsive state.
Any clue what's going on, or how to resolve it?
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Sent from my ATRIX using the Premium XDA App
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Yep, that's right. The over-priced, highly (over)rated $20 iShields brand one. I know for a fact that was the cause, after I figured it out and started talking to other atrix owners (minus the liar fanboys that lurk in every forum saying "works fine for me derp!" whenever someone dares to suggest a product has flaws).
Problem immediately went away, forever. I've gone naked since May /11 without a single scratch. IMO screen protectors on gorilla glass is for people who wear a seat belt in a car wash. I'm not sure, but I suspect the problem happens when the screen protector starts to age, and/or when it gets really warm. I also suspect it's a problem with certain phones and the types of touchscreens on those phones not playing nice with screen protectors. Started happening on mine after just one month.
omnius1 said:
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Click to expand...
Click to collapse
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Voelker45 said:
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Click to expand...
Click to collapse
Just to offer some backstory, this started a couple months ago back when he just had the stock AT&T rom (2.3.X or 2.2.X I think? I can't recall clearly) During one of it's "working" periods (last week), I unlocked his bootloader and flashed it with CM9...
Probably won't mean much since the problem existed before I unlocked+CM9'ed it, but while it's not freaking out, I can give you some numbers:
• Model Number: MB860
• Android Version: 4.0.3
• Baseband Version: N_01.77.15P
• Kernel Version: [email protected] #47
• CyanogenMod Version: 9.0.0-RC0-olympus-KANG
omnius1 said:
The f-ing goddam screen protector.
Click to expand...
Click to collapse
Yeh, I have had this problem with screen protectors interfering with capacitive screens before, I am now using some really cheap protectors (5 for £3) and have had no such problems since and have a good bit of pocket money left .
TLRtheory said:
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Click to expand...
Click to collapse
ah ok in that case, I have nothing else, I'm only good for ranting. GL!
My touchscreen randomly does these freak outs and stops working:
Usually for me it is caused when the phone is really warm (like on the charger in the car) or when my hands are sweaty (also could just be the the phone is warm in this case as well)
Once it's done with its freak out, I turn off the screen (my power button still works) and clean off the screen with my shirt, wipe the sweat off my hands and turn it back on...everything is then fine.
Also, with my old phone (dell streak) if I kept the phone in my pocket with the screen facing towards my leg it would exhibit this behavior (probably again a case of the screen becoming really warm) but if I kept it screen out it was fine.
I have the same exact problem and have gone back to my Captivate because I couldn't figure it out.
Sent from my Touchpad using XDA
News on this? Here's my experience.
Any news on this, guys? I'm going insane. Here's my experience: I used to get these touchscreen-stops now and then but then they started getting more and more often. What I do to make them stop for a while is a clean restore, that is wiping boot, system, preinstall, cache, userdata with fastboot before installing a new ROM or restoring from backup. Whenever I do that, it comes back to life. If I flash a new ROM without all those wipes, it doesn't work. What sucks so bad is that, even though that fixes the problem, it's only temporary. It starts again after a few weeks. There is NO way this is hardware, and there's also NO way we can't find a solution for this!!!! Come on, guys!!! HELP US OUT, PLEASE!!!!!!!
Have you tried the raindrop fix? I was having similar problems and it worked for me.
Sent from my MB860 using xda premium
My screen has ghost fingers if my hands are even the slightest damp.
A buddy of mine had really bad touch screen issues and had to send back for warranty.
Sent from my MB860 using xda app-developers app
I'm having the same issue
I'm having the exact same issue. It sometimes works, sometimes doesn't. Anywhere from one minute to a whole day, everything you described exactly. No screen protector. I wiped it once and it worked temporarily, but it's back to the old sporadic unresponsiveness again.
I'm still not convinced that it isn't a hardware issue. I'm going to buy a T5 Torx Screwdriver and open her up and see if one of the connections is loose. Has anyone else done this?
I'll post tomorrow night with my results.
Here is a handy trick to determine if your digitizer it going out.
1. Find an appliance like a cable set top box, AV receiver or computer for example
2. Lay your phone face down in the warm air that emits from devices like this.
3. Leave it alone for about 10 to 15 minutes.
4.Pick your phone up and perform some finger swipe heavy tasks.
If you notice its a lot more sensitive like you remember when you first got it then you have a digitizer that is going bad. If nothing changes then its most likely software related.
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
cjmillisock said:
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
Click to expand...
Click to collapse
Could be the ribbon behind the digitizer, if its loose or moves it can kill all response to touch. You may have to replace your digitizer to fix this.
Sent from my MB860 using xda premium
I'm dying here
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
pichualvarez said:
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
Click to expand...
Click to collapse
I would also suspect the digitizer. I replaced mine for $45 (frame pre attached attached highly recommended).
The connections are very small, so there is much that can go wrong while doing this kind of brain surgery and the ribbons will rip easily.
Sent from my MB860 using Tapatalk 2
Same problem here. It is like some Ghost is operating it without my permission
Sometimes feels like is should hit the phone on the wall.
I know its not gonna help.
Anybody there who has solution for this
So after my daily workout (watching "Breaking Bad" on the tablet) I managed to let my trusty 201 slip from my hands while taking it off the thin little ledge on my exercise bike console.
BAM, landed right on its corner on the bike's steel support bar.
Now it appears to be functional - except for the small point that the screen don't come on anymore.
Since I cleverly just put a "pattern" lock on it before maiming the poor thing, I can't get it unlocked reliably, but when I press the screenshot button on the keyboard it makes the shutter-click sound.
And I am getting notification bleeps when new mail comes in.
But I'm blind.
I have taken some steps in the past to open it, I did the Wifi antenna thing and tried to get the GPS working (bahahaha what a waste of time THAT was!)... and I've repaired a number of other phones and crap... so I'm not unskilled in this arena.
And I'm sort of optimistically hoping it's just a loose cable or something. There's only the smallest dent in the casing in the corner. No cracks in the screen or anything.
But has anyone gone down this road and maybe has some pointers as to what to look out for? Is there a backlight module that might have popped and just needs replacing?
I'm very sad, this little guy has been my stalwart companion for many, many moons...
Thanks for any input.
R
rprussell said:
So after my daily workout (watching "Breaking Bad" on the tablet) I managed to let my trusty 201 slip from my hands while taking it off the thin little ledge on my exercise bike console.
BAM, landed right on its corner on the bike's steel support bar.
Now it appears to be functional - except for the small point that the screen don't come on anymore.
Since I cleverly just put a "pattern" lock on it before maiming the poor thing, I can't get it unlocked reliably, but when I press the screenshot button on the keyboard it makes the shutter-click sound.
And I am getting notification bleeps when new mail comes in.
But I'm blind.
I have taken some steps in the past to open it, I did the Wifi antenna thing and tried to get the GPS working (bahahaha what a waste of time THAT was!)... and I've repaired a number of other phones and crap... so I'm not unskilled in this arena.
And I'm sort of optimistically hoping it's just a loose cable or something. There's only the smallest dent in the casing in the corner. No cracks in the screen or anything.
But has anyone gone down this road and maybe has some pointers as to what to look out for? Is there a backlight module that might have popped and just needs replacing?
I'm very sad, this little guy has been my stalwart companion for many, many moons...
Thanks for any input.
R
Click to expand...
Click to collapse
I have read some similar stories in the past and some times it has just been a cable that has dislodged inside.. Obviously this can vary but I would first try plugging in a hdmi cable to your TV and making sure that the graphics chip is still working.
I'd imagine it would be and your next step would be to open it up and start unplugging and replugging everything you can.
flumpster said:
I have read some similar stories in the past and some times it has just been a cable that has dislodged inside.. Obviously this can vary but I would first try plugging in a hdmi cable to your TV and making sure that the graphics chip is still working.
I'd imagine it would be and your next step would be to open it up and start unplugging and replugging everything you can.
Click to expand...
Click to collapse
Aha! The hdmi cable. Hadn't occurred to me.
I love this forum.
(Also been using androwook for quite some time, with Data2SD... big fan - very smooth. would hate to lose and/or have to reinstall from scratch though!)
flumpster said:
I have read some similar stories in the past and some times it has just been a cable that has dislodged inside.. Obviously this can vary but I would first try plugging in a hdmi cable to your TV and making sure that the graphics chip is still working.
I'd imagine it would be and your next step would be to open it up and start unplugging and replugging everything you can.
Click to expand...
Click to collapse
Well - this was a fantastic suggestion, since the HDMI gave me a perfect picture and the thing is (as thought) fully functional.
It was interesting trying to judge where to tap on the tablet to hit certain things on the screen, though.
This is actually quite a load off, since worst case I can get a new screen from ebay.
Thanks again, flumpster - I am much relieved, and you are a god among men!
rprussell said:
Well - this was a fantastic suggestion, since the HDMI gave me a perfect picture and the thing is (as thought) fully functional.
It was interesting trying to judge where to tap on the tablet to hit certain things on the screen, though.
This is actually quite a load off, since worst case I can get a new screen from ebay.
Thanks again, flumpster - I am much relieved, and you are a god among men!
Click to expand...
Click to collapse
Here you go mate. I knew I had seen it before.
http://www.youtube.com/watch?v=yRLcxI2JddQ#t=411
This is for the original transformer but they should be nearly the same.
flumpster said:
Here you go mate. I knew I had seen it before.
http://www.youtube.com/watch?v=yRLcxI2JddQ#t=411
This is for the original transformer but they should be nearly the same.
Click to expand...
Click to collapse
Nice!
I have my fingers crossed.
So do my kids, who are going into "Minecraft PE" withdrawal at the moment.
Well, after popping the case, I've disconnected and reconnected everything available - no change in behavior.
I'll try unsticking the LCD and see what else is in there, but it's looking like a more aggressive repair will be in order.
V.sad
PS there's also this vid I found: http://www.youtube.com/watch?v=JpJs_OI8joA
Arright. Here's my logic. Tell me where I'm wrong.
The video works - the HDMI proved that.
The tablet works - ditto.
Being able to touch and use the tablet shows me that the digitizer is ok, too.
I've reseated all the connectors, but I still can't get a picture.
Therefore, it's the LCD that's gone bad.
Therefore I should order a new LCD.
Right?
rprussell said:
Arright. Here's my logic. Tell me where I'm wrong.
The video works - the HDMI proved that.
The tablet works - ditto.
Being able to touch and use the tablet shows me that the digitizer is ok, too.
I've reseated all the connectors, but I still can't get a picture.
Therefore, it's the LCD that's gone bad.
Therefore I should order a new LCD.
Right?
Click to expand...
Click to collapse
Hmmm.. Sounds logical but it could be the power going to the screen or something else that connects the screen. Or does the power etc control the digitizer also ?
flumpster said:
Hmmm.. Sounds logical but it could be the power going to the screen or something else that connects the screen. Or does the power etc control the digitizer also ?
Click to expand...
Click to collapse
Well, there's one (and only one) ribbon cable feeding the LCD - and two going to the digitizer.
News, though - I pulled out the battery and found another ribbon cable tucked underneath to reseat.
After that, I put it back in and hooked up the LCD - and it came up!!
Sort of, anyway. It lit up enough to show me the spiderweb of cracks all along the bottom edge.
(I think I found my problem.)
Now off to eBay to shop for a replacement... I hope I didn't munge up anything else in there while I was mucking around!
rprussell said:
Well, there's one (and only one) ribbon cable feeding the LCD - and two going to the digitizer.
News, though - I pulled out the battery and found another ribbon cable tucked underneath to reseat.
After that, I put it back in and hooked up the LCD - and it came up!!
Sort of, anyway. It lit up enough to show me the spiderweb of cracks all along the bottom edge.
(I think I found my problem.)
Now off to eBay to shop for a replacement... I hope I didn't munge up anything else in there while I was mucking around!
Click to expand...
Click to collapse
See if someone is selling a bricked Tf201 of TF300 that you can get the screen out of.
I will have to trade it in if i cant find a solution for my issue
Basically i have only 2 issues with my phone
1) I keep my phone in my back pocket generally, but quite often when i pull it out of my pocket, the little door for the sim card/charger has popped open........ altho it makes me a bit scared to submerge it, i can live with this
2) This is the dealbreaker, if i cant solve this the z2 will be getting sold and something else will take its place. Again this only occurs in my pocket, but every single time i pull phone out, its changed the homescreen...... widgets either get added toor removed from homescreen, apps open and run, music player starts and stops by itself, notification bar quick settings icons get added or removed, flight mode gets activated, silent activated etc
I believe this is caused ny the screen reacting to metals, wood and lead, is therea way to turn this feature off so it will only work with my finger touching the screen?
As i said, its a fantastic phone and id like to keep it, but as long as it gonna keep doing these random things in my pocket then its just not worth keeping
You could see if 'Glove mode' is selected in Settings > Display. If it is, turn it off.
nobnut said:
You could see if 'Glove mode' is selected in Settings > Display. If it is, turn it off.
Click to expand...
Click to collapse
aha.... so glove mode is what makes the screen resond to the other items then? Im pretty sure glove mode is off but i will check now, as i said would love to keep this phone its brilliant....... but as it is currently its just a waste of time
numskull said:
I will have to trade it in if i cant find a solution for my issue
Basically i have only 2 issues with my phone
1) I keep my phone in my back pocket generally, but quite often when i pull it out of my pocket, the little door for the sim card/charger has popped open........ altho it makes me a bit scared to submerge it, i can live with this
Click to expand...
Click to collapse
Your flap is defective. Same thing happened to me. I've bought a new flap (for about 10€) and now it's fine.
Then, don't open your flap too often, prefer wireless file transfer and charging via magnetic port.
numskull said:
aha.... so glove mode is what makes the screen resond to the other items then?
Click to expand...
Click to collapse
The screen will still respond to metal objects and pencil lead etc, but it should be activated by your backside through your jeans anymore.
Crap..... glove mode is not switched on........ guess it gotta go up for sale then. Will be sad to see it go tho, n yeah already got magnetic charger n wireless connect.... ive only actually opened that door twice lol
Or another possibility, as im rooted, is there something i could remove/freezethat will stop the screen responding to other materials????
Not to my knowledge. It's strange, I often carry mine in my back pocket (screen facing inwards) and have never had the screen turn on. I can't say the same for my G3 which often turns the screen on.
Since it is isolated case and no one else expierenced this as far as i can tell its user error, you got dodgy apps or there is something wrong with the way you handle the phone.
nobnut said:
Not to my knowledge. It's strange, I often carry mine in my back pocket (screen facing inwards) and have never had the screen turn on. I can't say the same for my G3 which often turns the screen on.
Click to expand...
Click to collapse
Interesting..... i didnt think of it before, but i suppose i should have asked if anyone else is having a similar issue?
feis said:
... something wrong with the way you handle the phone.
Click to expand...
Click to collapse
In his pocket? :silly:
feis said:
Since it is isolated case and no one else expierenced this as far as i can tell its user error, you got dodgy apps or there is something wrong with the way you handle the phone.
Click to expand...
Click to collapse
possibly but i wouldnt have thought so..... i dont treat this phone any differently to any other phone ive owned (well.... actually i havent thrown the z2 across the room...... yet, lol) and as far as apps go, i only actually have 5 or 6 downloaded apps installed, all of which i have used without issue on previous phones, and deleted around half of the useless (to me) pre loaded system apps, and its been doing it since i had it, well since a few days after i got it, but the first few days were a weekend and i wasnt at work just chilling at home so phone didnt really go in pocket
numskull said:
possibly but i wouldnt have thought so..... i dont treat this phone any differently to any other phone ive owned (well.... actually i havent thrown the z2 across the room...... yet, lol) and as far as apps go, i only actually have 5 or 6 downloaded apps installed, all of which i have used without issue on previous phones, and deleted around half of the useless (to me) pre loaded system apps, and its been doing it since i had it, well since a few days after i got it, but the first few days were a weekend and i wasnt at work just chilling at home so phone didnt really go in pocket
Click to expand...
Click to collapse
Do you have double tap to wake on? if so maybe your backside is unlocking it.. and moving stuff around..
Steve
5teve said:
Do you have double tap to wake on? if so maybe your backside is unlocking it.. and moving stuff around..
Steve
Click to expand...
Click to collapse
Actually yesi do have that switched on..... even if that the cause tho, my work trousers arent made of wood,metal or lead so screen shouldnt be responding to my backside. I will turn it off n see how it goes tho, it might be the cause but then again you gotta be quite precise for that double tap t work anyway and my backside is tiny lol so maybe not........ great suggestion tho
numskull said:
Actually yesi do have that switched on..... even if that the cause tho, my work trousers arent made of wood,metal or lead so screen shouldnt be responding to my backside. I will turn it off n see how it goes tho, it might be the cause but then again you gotta be quite precise for that double tap t work anyway and my backside is tiny lol so maybe not........ great suggestion tho
Click to expand...
Click to collapse
Well I just tried my phone unlocked against my jeans and it still detects and operates the screen... So you never know
Steve
I have knock on turned off - otherwise when walking with the phone in my pocket listening to the FM radio, I end up sending several texts and emails....
Update: It appears it was actually the 'tap to wake' causing the issue..... i turned it off and went to work friday night and when i got home saturday morning phone was exactly how it should have been, no open apps, no options changed, no icons removed. Nice feature but think ill leave it off forever lol