Calibration app - Click Themes and Apps

Hi,
Is there an application for calibration of our Tattoo? I do not mean the one we can enter values in, but one were we f.x. can tap on a point to calibrate.
Or maybe a how-to for using the app with entering values?

Errrr, people??

Ihaveatattoo said:
Errrr, people??
Click to expand...
Click to collapse
yeah there is look at the roms in the development section

Better late than never
But after a reboot the settings will reset, and you`ll have to calibrate your tattoo again

Well i'll be doggoned! It could install, thanks! Could just wish we could get the numbers out after calibration so we could insert them in "Tattoo Calibration" app.
But thanks again!

better claibration
I have changed few values in the existing app, made it calibrate better
I have posted the details in following thread, check it out if you like to use it
http://forum.xda-developers.com/showpost.php?p=10218096&postcount=70
I have tested it both on froyo and gingerbread and it has improved the calibration.

Here is the one from the nFinity rom. Works great for me.. Just install like a normal APK and it should be there (with all the other apps)

Thanks, you are wonderfull people!

dutchcow94 said:
Here is the one from the nFinity rom. Works great for me.. Just install like a normal APK and it should be there (with all the other apps)
Click to expand...
Click to collapse
It is the same app that i posted in the link above your post

Related

Does "Screen Off and Lock" work on SGS2?

I am cruious that does this work on the SGS2, including the animation and sound? Can this switch off the screen properly? Thanks
Katecca said:
I am cruious that does this work on the SGS2, including the animation and sound? Can this switch off the screen properly? Thanks
Click to expand...
Click to collapse
yes, works great.
with actual version i get FCs after screen off. doesnt matter which settings i set.
an older version works fine for me.
oh, op is the dev himself. welcome.
sent from my SGSII via T*patalk
walda said:
with actual version i get FCs after screen off. doesnt matter which settings i set.
an older version works fine for me.
oh, op is the dev himself. welcome.
sent from my SGSII via T*patalk
Click to expand...
Click to collapse
Would you please try to reinstall the app?
Katecca said:
Would you please try to reinstall the app?
Click to expand...
Click to collapse
i restore mine over from sgs, i remember it worked fine.
last few days there was an update in the market, iirc. that also worked fine.
Katecca said:
Would you please try to reinstall the app?
Click to expand...
Click to collapse
Didn't work in my case...
BUT!:
When i use an icon on the desktop or in notification bar, it works. But i have combined it with a swype option in Go Launcher Ex. When i swype up, the App is launched, the screen turns off, 2 seconds after that, he turns on again and [email protected]
So i dont think its a GoLauncher Problem, hm?
Edit:
Tried to connect a minimalistic text widget with screenlockanddonate.main activity. Same result
sunwee said:
i restore mine over from sgs, i remember it worked fine.
last few days there was an update in the market, iirc. that also worked fine.
Click to expand...
Click to collapse
Thanks for your report!
walda said:
Didn't work in my case...
BUT!:
When i use an icon on the desktop or in notification bar, it works. But i have combined it with a swype option in Go Launcher Ex. When i swype up, the App is launched, the screen turns off, 2 seconds after that, he turns on again and [email protected]
So i dont think its a GoLauncher Problem, hm?
Edit:
Tried to connect a minimalistic text widget with screenlockanddonate.main activity. Same result
Click to expand...
Click to collapse
That's strange!
I just installed the GO Launcher EX using default settings and without any theme on my Nexus S, everything is fine. Also, I tried to use minimalistic text widget to launch Screen Off and Lock and found no problem. However, you use select "com.katecca.screenlockanddonate.MainHelper" instead of "com.katecca.screenlockanddonate.main", otherwise force close is expected.
It is also fine by using gesture in my ADWLauncher. So if you are free, could you please try to install other launchers to test it or send me the log using catlog for debugging?
Thanks a lot!
Katecca said:
However, you use select "com.katecca.screenlockanddonate.MainHelper" instead of "com.katecca.screenlockanddonate.main", otherwise force close is expected.
Click to expand...
Click to collapse
That was the point! Thanks!
In Go Launcher Ex i can only select the whole App. There it crashes.
In MinimalisticText i can select an Activity of an App. When i use MainHelper instead of Main, everything is fine.
So it's fixed and working with minimalisticText, which is ok for me.
I will talk to GoLauncher Devs to make activities selectable.
Thanks man!
walda said:
That was the point! Thanks!
In Go Launcher Ex i can only select the whole App. There it crashes.
In MinimalisticText i can select an Activity of an App. When i use MainHelper instead of Main, everything is fine.
So it's fixed and working with minimalisticText, which is ok for me.
I will talk to GoLauncher Devs to make activities selectable.
Thanks man!
Click to expand...
Click to collapse
That's great and hope you enjoy using it. BTW, could you alter your rating in Market? Thanks!
better?
walda said:
better?
Click to expand...
Click to collapse
Sure! Thanks!

[APP] Transparent Settings app LIST ADDED FOR INTERESTED PORTERS :D

Heey there
I was searching a while for a transparent settings app (I like transparent apps so )
Since no theme porter or dev was answering the Q for transparent settings app
I tried to customize the settings app myself i tried different things but unsuccessful (maybe because of my limited skills )
After some more trying it almost works
So thought I'll post it here so everyone can enjoy a transparent settings app
Since I'm not a dev or theme porter and I was just trying something out
There are some bugs in it but I don't have the required skills to fix them all
so if there is any dev or theme porter that could give me some tips PM PLEAS I really want this done
Extra options that work
Build in font changer in settings app itself so no need for Third party app
G-sensor calibration option
This need to be "fixed"
Wireless and network menu
Bluetooth switch on the check-box in the settings menu doesn't work (when you enable bleutooth in the statusbar the settings can be changed in the bleutooth menu)
Call settings menu
The call settings menu should be expanded (now there is only a voice-mail setting option so nothing like hide numer callsettings etc.)
Sound settings menu
There is an option for video-call ringtone (need to be removed but doesn't give FC so not urgent )
Display settings menu
Brightness setting doesn't work (if you use the Power control widget you can change the brightness)
There are options for
- White colour density
- Black colour density
- Saturation
- TV out
All FC, whether they should be removed or fixed, if someone can make these option working that would be super
The horizontal calibration must be edit because the roll indicator is not one the right scale
Location and security menu
The option for aiding sensors is missing
Application menu
in the menu "manage applications the size for each app is on the big side not verry handy if you have a lot of apps but its just for the looks so not verry urgent
SD-card and memory menu
There is an option for formatting internal memory haven't tried it yet but if someone has enough courage to try this option we will know if it works
For the rest everything is working perfect
Thx man
Love it !
longlong240 said:
Thx man
Love it !
Click to expand...
Click to collapse
I'm still looking for a solution for the parts that don't work
I need to learn a lot more to make this working fully
This was my first attempt so thanks for testing
I'll give you a thanks when I've my computer
Sent from my GT-I5800 using XDA App
(I like transparent apps
Blackyx007 said:
I'm still looking for a solution for the parts that don't work
I need to learn a lot more to make this working fully
This was my first attempt so thanks for testing
I'll give you a thanks when I've my computer
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
There must be a solution for the part doesn't work
I will wait for it because it is so
longlong240 said:
There must be a solution for the part doesn't work
I will wait for it because it is so
Click to expand...
Click to collapse
I've uploaded a new one looks a bit better but still some things need to be fixed but I'm trying
Blackyx007 said:
I've uploaded a new one looks a bit better but still some things need to be fixed but I'm trying
Click to expand...
Click to collapse
Downloading
longlong240 said:
Downloading
Click to expand...
Click to collapse
Thanks for trying
Could you give me some feedback and let me know which parts are not working
I'm probably doing it on the wrong way but I really want a transparent settings app so
EDIT: I think i didn't compile the apk correctly ore somthing else went wrong because now there are less functions working!? HEEEELP
Blackyx007 said:
Thanks for trying
Could you give me some feedback and let me know which parts are not working
I'm probably doing it on the wrong way but I really want a transparent settings app so
EDIT: I think i didn't compile the apk correctly ore somthing else went wrong because now there are less functions working!? HEEEELP
Click to expand...
Click to collapse
Er... When I press on any subtitles, it FC and... and... I found that i forget to do a backup... so... so... I am reflashing the rom
longlong240 said:
Er... When I press on any subtitles, it FC and... and... I found that i forget to do a backup... so... so... I am reflashing the rom
Click to expand...
Click to collapse
No need to re-flash your rom
just past the Settings.apk attachment in System/app an you got your old Settings.apk back
Blackyx007 said:
No need to re-flash your rom
just past the Settings.apk attachment in System/app an you got your old Settings.apk back
Click to expand...
Click to collapse
Reflash a Rom is much more easier than prepare a cup noodles. Just plug to PC and then fire up odin, wait for 2mins than Titanium Backup than that's all
Now doing a full Backup
But anyway thank you for your setting.apk
longlong240 said:
Reflash a Rom is much more easier than prepare a cup noodles. Just plug to PC and then fire up odin, wait for 2mins than Titanium Backup than that's all
Now doing a full Backup
But anyway thank you for your setting.apk
Click to expand...
Click to collapse
That's true
but when i see its not working but I'm on my way home and don't have a pc I just replace the old one
so no reboot, flash or backup needed
Thanks for trying I hope some day a theme porter will give me some tips or make a better one
I'll reupload my previous one so some people can try it out and maybe fix the bugs
After trying my first attempt again i discovered that the build in font changer in the settings app works so you can apply new fonts in the settings app itself so no need to install any third party apps
Also the option for G-sensor calibration works!!!
Well. The main difference you will find in styles.xml when you decompile this Settings.apk and the one from our phone. There are some lines that have to be added to it. And then you will have to define them in Public.xml also. And then again you will have to declare them in the classes.dex file. i.e. in the smali files.
Its tedious. Smali/baksmali.
dhirend_6d said:
Well. The main difference you will find in styles.xml when you decompile this Settings.apk and the one from our phone. There are some lines that have to be added to it. And then you will have to define them in Public.xml also. And then again you will have to declare them in the classes.dex file. i.e. in the smali files.
Its tedious. Smali/baksmali.
Click to expand...
Click to collapse
Thank you so much
Since I actually still have very little experience with XML. I am teaching myself more, so it will take a while before I can continue to improve this
many thanks for your advice
If there is someone with more knowledge than me please feel free to edit the app
Sent from my GT-I5800 using XDA App
^ Hi,
what's the exact problem/ui issue your are having? (like text color or list item selection color etc.)
I haven't tried modding an app before but I am a full-fledged Android developer.
So I will try to help you if possible.
sameer.pur said:
^ Hi,
what's the exact problem/ui issue your are having? (like text color or list item selection color etc.)
I haven't tried modding an app before but I am a full-fledged Android developer.
So I will try to help you if possible.
Click to expand...
Click to collapse
We need to port this. Add few lines to styles.xml and the smali files.
Ok, I got the editing part. but what should I try to fix?
Is there a list of issues for this?
sameer.pur said:
Ok, I got the editing part. but what should I try to fix?
Is there a list of issues for this?
Click to expand...
Click to collapse
Excuse me for my wrong word choice,
with fixing I meant editing
But I'm really a noob in this kind of things
I will send a list as soon as possible
Thanks for your interest

I can't stand the CM7 keyboard

On hyperdroid cm7 for hd2 the board is so much easier and better. How can I use thay keyboard on my atrix? Portrait mode is very poor on the atrix stock cm7 camera. Can you help?
THANKS
Download a different one, there are only about a hundred on the market.
Sent from my MB860 using xda premium
Swiftks said:
Download a different one, there are only about a hundred on the market.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I already downloaded like 20 different ones and they all don't work at all. I enabled them and tried to use them in dolphin mini and messaging and by simply holding the keyboard pop up button. It only activates the stock cm7 keyboard. I went into keyboard options and selected the keyboards and when I go to messaging and open keyboard it's the cm7 one. When i press the settings key it only shows the cm7 keyboard...
thanks
You have to long press a text box and choose input method... this is fundamental android options...
1chris89 said:
I already downloaded like 20 different ones and they all don't work at all. I enabled them and tried to use them in dolphin mini and messaging and by simply holding the keyboard pop up button. It only activates the stock cm7 keyboard. I went into keyboard options and selected the keyboards and when I go to messaging and open keyboard it's the cm7 one. When i press the settings key it only shows the cm7 keyboard...
thanks
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
sublimejosh2000 said:
You have to long press a text box and choose input method... this is fundamental android options...
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yes, I'm fully aware of that function. However the only method that is allowed is the default keyboard option. Know of a specific keyboard app that is bigger, nicer, ans easier than the stock cm7 keyboard that works on all system apps and dolphin mini?
Thanks
First "Enable" then "Long Press" ...If your phone cant enable more keyboards, you might as well throw it out the window for an iPhone now.
My CM7 has like 5 different working keyboards
1chris89 said:
Yes, I'm fully aware of that function. However the only method that is allowed is the default keyboard option. Know of a specific keyboard app that is bigger, nicer, ans easier than the stock cm7 keyboard that works on all system apps and dolphin mini?
Thanks
Click to expand...
Click to collapse
Please don't take this the wrong way...
If you download a keyboard.. for example the "Gingerbread Keyboard" from the market, (Which is the one I use and looks much nicer than stock and is resizable to fit your needs). Then you go into the settings menu and enable this keyboard from the Language/Keyboard options menu. Then you go into a text message or something and longpress --> input method.. you WILL see two keyboards there, one Android keyboard, and the other will be your downloaded keyboard...
If you choose the downloaded one, it will systematically
change your keyboard across all apps within android to that one...
This is what I was speaking of... and this WILL do what you are asking...
If this is not clear please let me know..
^^ What a nice guy you are
sublimejosh2000 said:
Please don't take this the wrong way...
If you download a keyboard.. for example the "Gingerbread Keyboard" from the market, (Which is the one I use and looks much nicer than stock and is resizable to fit your needs). Then you go into the settings menu and enable this keyboard from the Language/Keyboard options menu. Then you go into a text message or something and longpress --> input method.. you WILL see two keyboards there, one Android keyboard, and the other will be your downloaded keyboard...
If you choose the downloaded one, it will systematically
change your keyboard across all apps within android to that one...
This is what I was speaking of... and this WILL do what you are asking...
If this is not clear please let me know..
Click to expand...
Click to collapse
Just tried downloading gingerbread keyboard. It says package file was not signed correctly. I'll try closing market and try again. I'm running the latest cm7 for the atrix.
Thanks
I installed hackers keyboard and it doesn't show up in the input method list. Trust me i've done this so many countless times on none cm7 roms. Just never tried it in cm7. I believe it will not work. I don't like that comment above where the guy seems frustrated explaining it to me. I already know exactly what to do. I am doing everything 100% correctly. However because of the fault of cm7, will not allow any other input method other than stock to show up in the input method field. Please confirm.
*On a fresh latest cm7*
Later
By any chance have you flashed any kernels?
May be that if so...
Also, try reinstalling the rom if it's not too much trouble..
My last time I loaded CM7.. certain widgets would never show up in the widgets list...but after I flashed a second time, it would work.. Its real finicky.
1chris89 said:
I installed hackers keyboard and it doesn't show up in the input method list. Trust me i've done this so many countless times on none cm7 roms. Just never tried it in cm7. I believe it will not work. I don't like that comment above where the guy seems frustrated explaining it to me. I already know exactly what to do. I am doing everything 100% correctly. However because of the fault of cm7, will not allow any other input method other than stock to show up in the input method field. Please confirm.
*On a fresh latest cm7*
Later
Click to expand...
Click to collapse
Not frustrated, just *Confused* When you go into "Settings-->Launguage and Keyboard" after you install a new keyboard, do you see your new keyboard there and if so is it checked?
I have never had or heard of this issue, that was my only concern.
http://dl.dropbox.com/u/30610092/Dark Keyboard.apk EDIT: That one is only slightly better than stock, but still better...
Perhaps this one??
http://forum.xda-developers.com/attachment.php?attachmentid=475414&d=1293595054
Try out this Keybaord, it is for QHD devices (But it's Transparent......
http://dl.dropbox.com/u/16990152/DCK_qHD_signed.apk
Can you send me a screenshot of the setting menu so I can see..
Seriously, trying to help you, am I seem to be only 1 of two, so take it easy my friend
Or just use this APK, its the one I am using right now
(Here was a nice tuturial in the OP here for changing keyboard http://www.spacetimestudios.com/sho...yboard-for-your-qHD-HDPI-MDPI-Android-devices)
I figured out what I was doing wrong. I have to only select 1 keyboard at a time even know it lets u select several at once. Kind of weird. Anyway Gingerbread fixall is pretty damn solid and I like it a lot. Not quite as amazing as the keyboard on Hyperdroid HD2 roms but it's a lot better than stock.
THANKS BRO
BTW - I pulled the latinIME.apk from the Hyperdroid hd2 rom and corrected permissions and I get force closes after reboot. Maybe it's because it's not QHD so it simply won't work. I wonder how easy it would be to port it over? I really love how that hyperdroid hd2 keyboard looks and it's the easiest to use.
Later
I noticed that if the keyboard installs as the same name as a keyboard you already have it will only show one when you long press. I have found that if your third keyboard has a unique name it will show as a third choice ... but I'm glad you got it worked out, I like the qhd one in my last post, it installs as 3vo keyboard and is kinda awesome transparent!
1chris89 said:
I figured out what I was doing wrong. I have to only select 1 keyboard at a time even know it lets u select several at once. Kind of weird. Anyway Gingerbread fixall is pretty damn solid and I like it a lot. Not quite as amazing as the keyboard on Hyperdroid HD2 roms but it's a lot better than stock.
THANKS BRO
BTW - I pulled the latinIME.apk from the Hyperdroid hd2 rom and corrected permissions and I get force closes after reboot. Maybe it's because it's not QHD so it simply won't work. I wonder how easy it would be to port it over? I really love how that hyperdroid hd2 keyboard looks and it's the easiest to use.
Later
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
sublimejosh2000 said:
I noticed that if the keyboard installs as the same name as a keyboard you already have it will only show one when you long press. I have found that if your third keyboard has a unique name it will show as a third choice ... but I'm glad you got it worked out, I like the qhd one in my last post, it installs as 3vo keyboard and is kinda awesome transparent!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yeah I thought it was ok but I love how Gingerbread fixall can adjust the size and the different themes are awesome. Probably the best ever bro. Thanks
sublimejosh2000 said:
Not frustrated, just *Confused* When you go into "Settings-->Launguage and Keyboard" after you install a new keyboard, do you see your new keyboard there and if so is it checked?
I have never had or heard of this issue, that was my only concern.
http://dl.dropbox.com/u/30610092/Dark Keyboard.apk EDIT: That one is only slightly better than stock, but still better...
Perhaps this one??
http://forum.xda-developers.com/attachment.php?attachmentid=475414&d=1293595054
Try out this Keybaord, it is for QHD devices (But it's Transparent......
http://dl.dropbox.com/u/16990152/DCK_qHD_signed.apk
Can you send me a screenshot of the setting menu so I can see..
Seriously, trying to help you, am I seem to be only 1 of two, so take it easy my friend
Or just use this APK, its the one I am using right now
(Here was a nice tuturial in the OP here for changing keyboard http://www.spacetimestudios.com/sho...yboard-for-your-qHD-HDPI-MDPI-Android-devices)
Click to expand...
Click to collapse
Can you please post screenshots of the keyboards and install instructions?
Notorious544d said:
Can you please post screenshots of the keyboards and install instructions?
Click to expand...
Click to collapse
Hehe, I was thinking the same thing, but decided to just download them all and take a look myself. Install is super easy: download, select like any app install, done!
Then just see sublime's post for the instruction on enabling them. Cycling through them all took like 10 seconds.
i cant live without Slideit keyboard...it is the best....
andyt315 said:
i cant live without Slideit keyboard...it is the best....
Click to expand...
Click to collapse
Swype Beta > Slideit Keyboard.
HDPI ICS Keyboard!!!!!
http://forum.xda-developers.com/showthread.php?t=1317542
I flashed this Keyboard, and looks like it fixed the size issue and gave it Blue theme.... ENJOY!

[XXLP7][ROM][V.1.0]TJGalaxyRocker -> New Look :) New Features We are Back!!!

Hello SGS2 Lovers,
TJGalaxyRocker XXLP7 Based Rocker ROM
Post will be renewed.
Update Packages For ROM
Change log for XXLPQ:-
AOSP MMS
AOSP Clock
CM Music with DSP Manager
14 toggle Status Bar
AOSP Lockscreen
Many more ...
Themed Apps I was working on it for some time now
NO ETA's ... But I will try and do it ASAP
Reserved for Future ...
Which kernel is it using?
Sent from my GT-I9100 using Tapatalk
First tip - remove the bit about deleting batterystats.
This file is used to maintain, across reboots, low-level data about the kinds of operations the device and your apps are doing between battery changes. That is, it is solely used to compute the blame for battery usage shown in the "Battery Use" UI in settings.
That is, it has deeply significant things like "app X held a wake lock for 2 minutes" and "the screen was on at 60% brightness for 10 minutes."
It has no impact on the current battery level shown to you.
It has no impact on your battery life.
Deleting it is not going to do anything to make your more device more fantastic and wonderful... well, unless you have some deep hatred for seeing anything shown in the battery usage UI. And anyway, it is reset every time you unplug from power with a relatively full charge (thus why the battery usage UI data resets at that point), so this would be a much easier way to make it go away.
That lot comes from here (for more info click it!)
Atomix86 said:
Which kernel is it using?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
XXLPH kernel
jonboyuk said:
First tip - remove the bit about deleting batterystats.
/QUOTE]
Thanks for Posting the link for the Battery Stats Thingy
Will Update ...
And also now have to learn about the Finding Actual Battery Stats
Click to expand...
Click to collapse
Ok, great initiative. Good luck.
My personal feedback. There are two mods that for me are indinspensable: 1) battery percentage and 2) Lidroid mod (14 icons). CRT on-off is to impress girls and I leave this mod at your choice.
Is it possible to have a CWM package that has Battery percentage and Lidroid mod included?
Meanwhile I am downloading and I would suggest to check the first link as it seems not working.
albsat said:
Ok, great initiative. Good luck.
My personal feedback. There are two mods that for me are indinspensable: 1) battery percentage and 2) Lidroid mod (14 icons). CRT on-off is to impress girls and I leave this mod at your choice.
Is it possible to have a CWM package that has Battery percentage and Lidroid mod included?
Meanwhile I am downloading and I would suggest to check the first link as it seems not working.
Click to expand...
Click to collapse
Working on toggle and percentage already ...
First link u have to press skip add on top right hand corner ...
Sent from my GT-I9100 using XDA Premium
teju4u said:
XXLPH kernel
Click to expand...
Click to collapse
Yes but I mean what type? I imagine its cf root?
Sent from my GT-I9100 using Tapatalk
teju4u said:
Working on toggle and percentage already ...
First link u have to press skip add on top right hand corner ...
Sent from my GT-I9100 using XDA Premium
Click to expand...
Click to collapse
Dont forget to remove camera sound. just my opinion..
Yes will keep it in mind ...
Sent from my GT-I9100 using XDA Premium
Please upload samsung apps or just samsungs excellent push email app. It allows pinch zoom as well as group email. Its the only app out there that combines all three. Push pinch and group!
I'm gonna get back to you with feedback on this rom as soon as you do. Cheers.
subhani said:
Please upload samsung apps or just samsungs excellent push email app. It allows pinch zoom as well as group email. Its the only app out there that combines all three. Push pinch and group!
I'm gonna get back to you with feedback on this rom as soon as you do. Cheers.
Click to expand...
Click to collapse
I have kept EMAIL and Exchange app in the main Package as it is really useful
U can Enjoy !!!!
Is that the samsung supplied email app white envelope with red seal on front icon?
By the way, the first link is dead. Is the second link just a mirror? I.e. the same file?
Thanks for the quick response.
subhani said:
Is that the samsung supplied email app white envelope with red seal on front icon?
By the way, the first link is dead. Is the second link just a mirror? I.e. the same file?
Thanks for the quick response.
Click to expand...
Click to collapse
Yes it's the Same Samsung Supplied Email APP
And I have Changed the Source of link now ... Check in first post
Also, will upload on Mediafire or something
Great Job dude! That's a nice feature list.
Very smooth and stable ROM.
Good stuff coming in for RC3 too!
ajayjohn said:
Great Job dude! That's a nice feature list.
Very smooth and stable ROM.
Good stuff coming in for RC3 too!
Click to expand...
Click to collapse
Why not you both work together maintaining the stock firmware. it would be nice.
This rom is good, need more clean up. make it more lite! 200mb i think.. lol!
faiz2036 said:
Why not you both work together maintaining the stock firmware. it would be nice.
This rom is good, need more clean up. make it more lite! 200mb i think.. lol!
Click to expand...
Click to collapse
Hmmmm
And about more Clean up .. yes my aim is to do as much clean up as i can ...
Updated RC3 .... More Lighter
Enjoy !!!!
And Please Give FEEDBACK

AtomicGB-patch

http://forum.xda-developers.com/showthread.php?t=2083286
It turned out that AtomicGB works on our phones even without patching. So if you want you can follow this link and download AGB7. To fix some bugs out I made a working patch. If the camera fails to work, flash hansip's camera mod before the patch.
lokibg said:
http://forum.xda-developers.com/showthread.php?t=2083286
It turned out that AtomicGB works on our phones even without patching. So if you want you can follow this link and download AGB7. To fix some bugs out I made a working patch. If the camera fails to work, flash hansip's camera mod before the patch.
Click to expand...
Click to collapse
Thx,I m helping u to test it now!!
lokibg said:
http://forum.xda-developers.com/showthread.php?t=2083286
It turned out that AtomicGB works on our phones even without patching. So if you want you can follow this link and download AGB7. To fix some bugs out I made a working patch. If the camera fails to work, flash hansip's camera mod before the patch.
Click to expand...
Click to collapse
Did lock screen bugg are fixed to ?
Ainster said:
Did lock screen bugg are fixed to ?
Click to expand...
Click to collapse
If you mean that the camera button is slightly down, then no
lokibg said:
If you mean that the camera button is slightly down, then no
Click to expand...
Click to collapse
Yes yes thet's one the only bugg with ones takes me away from thet rom
lokibg said:
http://forum.xda-developers.com/showthread.php?t=2083286
It turned out that AtomicGB works on our phones even without patching. So if you want you can follow this link and download AGB7. To fix some bugs out I made a working patch. If the camera fails to work, flash hansip's camera mod before the patch.
Click to expand...
Click to collapse
I tried making the patch too..but wasn't successful thanks a ton for this!
Sent from my ST18i using xda app-developers app
wifi libs
Hey Lokibg,
If i compare your zip to the "PatchST18iV2.0.zip" i see there's some stuff missing in your zip. With v2.0 you have to manually add orig build.prop from ray.
Was this done on purpose ? I mean , for example the wifi libs from neo,arc,pro roms work on ray too ? (sorry cannot test now)
attached you find the patchv2 zip, in case you dont have it. I like sharing for the benefit of "all"
Br.
Michel
vleutmans said:
Hey Lokibg,
If i compare your zip to the "PatchST18iV2.0.zip" i see there's some stuff missing in your zip. With v2.0 you have to manually add orig build.prop from ray.
Was this done on purpose ? I mean , for example the wifi libs from neo,arc,pro roms work on ray too ? (sorry cannot test now)
attached you find the patchv2 zip, in case you dont have it. I like sharing for the benefit of "all"
Br.
Michel
Click to expand...
Click to collapse
I folowed jj's guide for porting from arc/neo to ray and I put those files that are mentioned in the guide. And yes even without the patch rom is fully working with one exception-camera.
Ainster said:
Yes yes thet's one the only bugg with ones takes me away from thet rom
Click to expand...
Click to collapse
I think this fixes the lockscreen problem http://forum.xda-developers.com/showthread.php?t=1881141. :good:
lokibg said:
I folowed jj's guide for porting from arc/neo to ray and I put those files that are mentioned in the guide. And yes even without the patch rom is fully working with one exception-camera.
Click to expand...
Click to collapse
Do you mean install this directly http://d-h.st/vXF and it works fine with Ray without any patch?
knightthgink said:
Do you mean install this directly http://d-h.st/vXF and it works fine with Ray without any patch?
Click to expand...
Click to collapse
I didn't test it for a long time, but I think everything else works except camera.
lokibg said:
I didn't test it for a long time, but I think everything else works except camera.
Click to expand...
Click to collapse
So now you are using atomic ROM with RAY?
I'm using it for 2 days day now, used the patch provided by OP and used the lock screen fix from this thread http://forum.xda-developers.com/showthread.php?t=1881141 which works beautifully.
tweaked it a little and added little features and so far no problem, benchmark score is 7300+
buguk1010 said:
I'm using it for 2 days day now, used the patch provided by OP and used the lock screen fix from this thread http://forum.xda-developers.com/showthread.php?t=1881141 which works beautifully.
tweaked it a little and added little features and so far no problem, benchmark score is 7300+
Click to expand...
Click to collapse
Can you say what tweaks you have added ?
Ainster said:
Can you say what tweaks you have added ?
Click to expand...
Click to collapse
nothing much really! ahahaha i just removed all the dead apk's in the app folder in system and edited the build.prop to show that it is a ray. you would also want to change the home launcher to have the settings and default themes, i got mine from the Gamers rom.
lock screen is full functional with all notifications, UI is GB+ICS+JB, video quality is a little low but barely noticeable, batt life is good, gaming experience is superb!
attached my latest score, it dropped a little after installing some apps but it is still 7100+
buguk1010 said:
nothing much really! ahahaha i just removed all the dead apk's in the app folder in system and edited the build.prop to show that it is a ray. you would also want to change the home launcher to have the settings and default themes, i got mine from the Gamers rom.
lock screen is full functional with all notifications, UI is GB+ICS+JB, video quality is a little low but barely noticeable, batt life is good, gaming experience is superb!
attached my latest score, it dropped a little after installing some apps but it is still 7100+
Click to expand...
Click to collapse
You got 7100+ score in what GHZ? 1ghz? or you overclocked to 1.4 GHZ?
TS, what kernel did u use? ty
Can you give the tutorial please i tried to flash it,but always fail :crying:

Categories

Resources