HELP! Waited till todays update to try installing the Android market fix... well now my tablet will not boot, keeps flashing the tap n tap startup screen then shuts off, even tried the factory reset (holding power with volume up). Can anyone help?
maccaw1 said:
HELP! Waited till todays update to try installing the Android market fix... well now my tablet will not boot, keeps flashing the tap n tap startup screen then shuts off, even tried the factory reset (holding power with volume up). Can anyone help?
Click to expand...
Click to collapse
http://forum.tegratab.com/viewtopic.php?f=13&t=18 theres some useful stuff here
Thanks, but the android_tegra_250_5740768.msi link is broken.
hanks, but the android_tegra_250_5740768.msi link is broken.
hanks, but the android_tegra_250_5740768.msi link is broken.
mccaw1,
Here is the link here at XDA for NVFlashing back to stock:
http://forum.xda-developers.com/showthread.php?t=861950
Follow this to the letter and it should get you back to bekit 1105 (stock
Version 2638). When you start up wifi, it pretty quickly should offer to
update you OTA to 3588.
Check out 3588 and make sure it is working good -- and you should
be ready to do whatever else you want to do then.
Good Luck!
Rev
Related
Hi, android noobie here, I have a rooted m8 that keeps rebooting after updating the at&t software.
I get the pop up that says AT&T software is available. If I clicked on continue it reboots to teamwin during boot up and once i reboot to system it just reboots itself every 30 secs or so.
I had to do a factory reset just to get my phone working again. But now the update screen is popping up again and I have to keep it under 35% so it doesn't auto update and keep pressing remind me later.
How do I disable this auto update? or is there an easier way to make the phone go back to stock since I really don't have any use of a rooted device besides watching MLB games...
Thanks for the help.
howyodoing said:
Hi, android noobie here, I have a rooted m8 that keeps rebooting after updating the at&t software.
I get the pop up that says AT&T software is available. If I clicked on continue it reboots to teamwin during boot up and once i reboot to system it just reboots itself every 30 secs or so.
I had to do a factory reset just to get my phone working again. But now the update screen is popping up again and I have to keep it under 35% so it doesn't auto update and keep pressing remind me later.
How do I disable this auto update? or is there an easier way to make the phone go back to stock since I really don't have any use of a rooted device besides watching MLB games...
Thanks for the help.
Click to expand...
Click to collapse
If I'm not mistaken, you would need to un-root your phone prior to installing any OTA Updates from AT&T. Also, you should only install the OTA Updates while using the stock recovery. So, you should re-flash the stock recovery and then attempt to complete the OTA Update. After that, you could re-install TeamWin, re-root and prosper.
Refer to this link on reverting back to stock... http://forum.xda-developers.com/showthread.php?t=2721435
howyodoing said:
Hi, android noobie here, I have a rooted m8 that keeps rebooting after updating the at&t software.
I get the pop up that says AT&T software is available. If I clicked on continue it reboots to teamwin during boot up and once i reboot to system it just reboots itself every 30 secs or so.
I had to do a factory reset just to get my phone working again. But now the update screen is popping up again and I have to keep it under 35% so it doesn't auto update and keep pressing remind me later.
How do I disable this auto update? or is there an easier way to make the phone go back to stock since I really don't have any use of a rooted device besides watching MLB games...
Thanks for the help.
Click to expand...
Click to collapse
Flash factory recovery, take the update, flash twrp back
or..
Titanium backup to freeze att update
an0ther said:
Flash factory recovery, take the update, flash twrp back
or..
Titanium backup to freeze att update
Click to expand...
Click to collapse
Just downloaded titanium back up. How do I freeze the update?
howyodoing said:
Just downloaded titanium back up. How do I freeze the update?
Click to expand...
Click to collapse
Try searching next time.. I see you are new here so i'll at least give you a link this time
http://forum.xda-developers.com/showthread.php?t=2752718
howyodoing said:
Hi, android noobie here, I have a rooted m8 that keeps rebooting after updating the at&t software.
Click to expand...
Click to collapse
Good rule of thumb, do not install OTA updates on any modded Android device, without at a minimum doing thorough research on what will happen.
Depending on the device and the update in question, attempt to install an OTA on a modded device will remove root, possibly plug existing exploits (and render the phone unable to be rooted), or put you in a boot loop (as you have experienced).
In particular, OTAs require stock recovery in order to install. So if you have custom recovery installed, this is why the OTA install is failing (and why it keeps booting into TWRP).
Also, there is little (if anything) contained in the OTAs that doesn't get posted in a safe format (flashed from custom recovery) in the Development section soon after the OTAs start to roll out.
Solution for HTC OneM8 (continous restarting after update)
howyodoing said:
Hi, android noobie here, I have a rooted m8 that keeps rebooting after updating the at&t software.
I get the pop up that says AT&T software is available. If I clicked on continue it reboots to teamwin during boot up and once i reboot to system it just reboots itself every 30 secs or so.
I had to do a factory reset just to get my phone working again. But now the update screen is popping up again and I have to keep it under 35% so it doesn't auto update and keep pressing remind me later.
How do I disable this auto update? or is there an easier way to make the phone go back to stock since I really don't have any use of a rooted device besides watching MLB games...
Thanks for the help.
Click to expand...
Click to collapse
Hi, i have a HTC One M8, and when my first update popped, i was very enthuziast.
I accepted to download the update, installed it, and... the problem appeared. The phone made his restart after update... and continued to do so over and over again. (Vibrate/HTC screen on for 30 secs/screen off and so on)
I checked the HTC website for solutions, i entered live chat with a consultant, and he asked me to start the Hard reset procedure. To do that, while turned off, you have to press both volume keys, and press the power button. The phone will enter in the Bootloader menu where you have some options. But... tell me, how to do that if the phone restarts continously? you have about 1-2 seconds to do that, while the screen is off. It gave me a hardtime to do that... Finnally, i managed to enter the Bootloader menu.
There... you have 2 options: (using volume up/down to select, and power button to select) you can select to poweroff(shutdown) the phone - and the phone will shutdown,
or you can turn off the fastboot, and the phone will restart normally.
The thing is that when you restart your phone normaly, while fastboot on, the phone skips some steps, and go directly to to turn it on and show you the startscreen.
When you make a major update, like system upgrade, when the phone restarts, he needs to load all the boot setting. And here is the problem. If you have fastboot on, and make a major update, the phone will enter in this ****ty cicle of continous restarts.
Remember to deactivate this Fastboot before you update!
sergiu.dragan25 said:
I checked the HTC website for solutions, i entered live chat with a consultant, and he asked me to start the Hard reset procedure. To do that, while turned off, you have to press both volume keys, and press the power button.
Click to expand...
Click to collapse
This is not correct. To force a reboot, you hold power and vol up (not both vol buttons). Then, when its restarting (the moment the screen goes dark and before the white boot screen appears) you let go of both those buttons, and only hold vol down.
sergiu.dragan25 said:
But... tell me, how to do that if the phone restarts continously? you have about 1-2 seconds to do that, while the screen is off.
Click to expand...
Click to collapse
In the case of a bootloop (phone keeps restarting), all you need to do is hold vol down during one of the reboot cycles. The timing doesn't matter in this case. Just sit on the vol down button until the bootloader screen appears.
sergiu.dragan25 said:
There... you have 2 options: (using volume up/down to select, and power button to select) you can select to poweroff(shutdown) the phone - and the phone will shutdown,
or you can turn off the fastboot, and the phone will restart normally.
The thing is that when you restart your phone normaly, while fastboot on, the phone skips some steps, and go directly to to turn it on and show you the startscreen.
When you make a major update, like system upgrade, when the phone restarts, he needs to load all the boot setting. And here is the problem. If you have fastboot on, and make a major update, the phone will enter in this ****ty cicle of continous restarts.
Remember to deactivate this Fastboot before you update!
Click to expand...
Click to collapse
First, the FASTBOOT selection in bootloader is not the same as "Fast boot" in Settings>Power. The latter just makes the phone start faster from power OFF. The former is an adb (Android Debug Bridge) special mode that allows you to flash partitions from a computer.
Second, in bootloader, you should have the following selections:
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
Of course, its the FACTORY RESET option you want if you want to wipe the phone. Scroll down to (using vol keys) and select with power button.
On the bootloader screen, the active selection is the blue box with white text below the green phone info (hboot number, radio number, etc.). FASTBOOT should only be the default "active" selection if your phone is connected to a computer by USB. Otherwise the default selection in bootloader should be HBOOT.
Third, the "Fast boot" option in Settings>Power does not make a restart "faster" by skipping any steps. It just makes a start from power OFF faster. Its kind of a trick, where power OFF is not really off, but just a deeper sleep mode. A restart is always a restart, regardless of whether "Fast boot" is selected or not in Settings>Power.
Hi,
I tried to update my m8 to 5.0 from kk, and I think the installation process was interrupted. My phone now boots to this screen only. My phone is not rooted and has a locked boot loader. Purchased in March. Any tips?
Thanks,
Matt.
When at that screen press volume up and power. Your suppose to see that screen on a stock restore screen. When I seen that I freaked to lol.
OK I will try that, should it boot automatically?
This did not work..
try updating via htc ruu: http://dl3.htc.com/application/RUU_...40.45.C33065.00_F_release_426617_signed_2.exe
mhitt93 said:
This did not work..
Click to expand...
Click to collapse
Make sure you hold vol up, then just tap and release the power button. Lots of folks mistakenly think you are supposed to press both at the same time, like this guy: http://forum.xda-developers.com/htc-one-m8/help/how-to-enter-stock-recovery-htc-one-m8-t3085254
Ok, I just got home from work and this entered recovery. Will factory reset fix?
My phones loads up to home screen then reboot in about 10 seconds... Any ideas? Running EMUI 3.1/Android 5.1 beta build. was trying to revert back to stock B013 and thats when this problem started
you go back from 5.1.1 to 5.0?
I had the same Problem,after a factory reset it works again
letschky said:
you go back from 5.1.1 to 5.0?
I had the same Problem,after a factory reset it works again
Click to expand...
Click to collapse
For some reason, I can't boot into factory reset...
use ADB and Huawei update extractor to reinstall the ROM of your choice:
http://forum.xda-developers.com/showpost.php?p=56447461&postcount=17
Djiban said:
use ADB and Huawei update extractor to reinstall the ROM of your choice:
http://forum.xda-developers.com/showpost.php?p=56447461&postcount=17
Click to expand...
Click to collapse
Thanks... I will sure give this a try!
I got into FASTBOOT&RESCUE MODE..... What next? When I get to my home screen/desktop, my phone still reboots after 10 seconds so I can't do anything there... Any help would be appreciated
Steamer2499 said:
I got into FASTBOOT&RESCUE MODE..... What next? When I get to my home screen/desktop, my phone still reboots after 10 seconds so I can't do anything there... Any help would be appreciated
Click to expand...
Click to collapse
If you can goto fastboot, simply install recovery.img from UPDATE.APP(use huawei update extractor to extract img).
then copy update.app to dload folder in sd card and poweroff device.
press vol down + power button, it will boot into recovery and install UPDATE.app.
I faced this problem when from 5.1, i installed kangvipB015. it worked the way i told above.
Okay... I had my phone plugged into my usb 3.0 then I plugged the phone into my usb 2.0 port and phone started responded to my holding down volume and power buttons then phone booted up into unknown update and now everything is fine.... weird though
Huawei x2 loop
Hello. my X2 boots and reaches lockscreen, when I input my password a window comes up that says the system is not responding. After I click OK or WAIT the homescreen shows up, but after a while phone restarts and the same sequence happens again. I have tried booting into safe mode but the same thing happens. I also tried POWER plus VOL UP to clear cache. I have left the phone off and with zero battery power to simulate a battery pull. I cannot RESET however since I have valuable data on the phone which I cannot lose. Before this I was attempting to delete files by uploading to Google Photos, the phone froze so I restarted. When it booted that is when the looping began. I don't remember the version my X2 is in but since I got it I only had updated it once last year. I hope someone can help me.
Mia
Hi im trying to back up my rooted 4,11 os kernal 3110-00002 g599d0cf , bulid 10.4.2.18 nov 22 2012 ww tf201 think its standard rom just rooted but is getting that slow want a newer rom on was looking at how flash something like that katkiss rom started reading about it, so thought i would backup my rom as worst case can get working tablet back but wont backup or enter recovery mode just starts up with the robot and the bar then after few seconds i get the robot fell over with the red triangle in his door . how can i fix this so i can update my rom thanks for any help you can give. tried restoring tablet to factory to get rid of settings done by pimp my rom and few other apps ive tried to make it usable but its still slow as wood . please help thanks
Can anyone help get My old tf201 problem fixed and help me to upgrade the rom on it please
Push power+volume up long time, when start recovery.
Skew01 said:
Push power+volume up long time, when start recovery.
Click to expand...
Click to collapse
Tried that it starts to boot then get robot fell over with the ! On his door and then have to hold the power button for ages to get it to boot up probably and it does this too when you select recovery or backup with clockwork mod. Does this do anything different to putting it in recovery mode ?Anyone know how to fix this problem please help me thanks
Skew01 said:
Push power+volume up long time, when start recovery.
Click to expand...
Click to collapse
How long when you say long time I tried upto a minute and nothing except vibrate after 10 -15 secs tried letting button go as soon as it vibrates but still nothing on the screen now won't do button up or down and power I get nothing. Please help.
thebig24fan said:
How long when you say long time I tried upto a minute and nothing except vibrate after 10 -15 secs tried letting button go as soon as it vibrates but still nothing on the screen now won't do button up or down and power I get nothing. Please help.
Click to expand...
Click to collapse
Tried power +down from cold boot and it loads boot loader menu but fails to load fast boot so still can't reload recover app like trmp anyone got any other ideas. Thanks for any help.
After I updated to C.49, my phone is acting weird...
1) Power Button is not working properly
2) Random emergency Call Screen and Power Reboot/Off Screen.
3) When I tried hard rebooting to go into recovery....it shows recovery mode at bottom for 10s and the reboots again to recovery mode text at bottom. It does not go into Menu of selection of English and Chinese language. This continues infinite times...Until finally it decides to boot to main home screen. But the Power button and Emergency screen/Reboot screen issue continues..
4) I tried factory reset of system setting...Same issue remained.
5) I finally tried factory reset wiping all data..Since the Version is latest C.49, which I believe has issues, the Emergency screen and Power Reboot Screens and Power Button not functioning properly continues..
6) I downloaded CPH1861EX_11_OTA_0490_all_sWtP8RDIvyoU.ozip from realme support. Tried updating that software in the phone..
But it lead to point (3) which I stated above...Same vibrating/rebooting after every 3 to 5 secs but not going into recovery Mode..It continued for 1 full day until battery died..Then I charged the phone for sometime and it continued its same funky routine of infinite rebooting and stopping at recovery Mode text.
But, eventually, after few hours, it booted normally to main screen.....But the problem was still there.
7) Now, even if try to shut down..from Power reboot/off screen...It shuts but in few seconds reboot again to main screen. So I cannot even shut it down.
8) I may try to download C.48 version (2.16 GB) and update from SD Card somehow..I don't know if it will revert back to different Version...But gotta try.
Or if there is enhanced or latest or custom update newer than C.49 available in market. maybe I should root or install that.
Frustrating...
How to get rid of this bug? I guess have to wait for new patch or something or next update. Service Centers are not open..because of Lockdown in Mumbai.
Please help, if someone knows the solution or had to deal with similar issue.
agovind said:
After I updated to C.49, my phone is acting weird...
1) Power Button is not working properly
2) Random emergency Call Screen and Power Reboot/Off Screen.
3) When I tried hard rebooting to go into recovery....it shows recovery mode at bottom for 10s and the reboots again to recovery mode text at bottom. It does not go into Menu of selection of English and Chinese language. This continues infinite times...Until finally it decides to boot to main home screen. But the Power button and Emergency screen/Reboot screen issue continues..
4) I tried factory reset of system setting...Same issue remained.
5) I finally tried factory reset wiping all data..Since the Version is latest C.49, which I believe has issues, the Emergency screen and Power Reboot Screens and Power Button not functioning properly continues..
6) I downloaded CPH1861EX_11_OTA_0490_all_sWtP8RDIvyoU.ozip from realme support. Tried updating that software in the phone..
But it lead to point (3) which I stated above...Same vibrating/rebooting after every 3 to 5 secs but not going into recovery Mode..It continued for 1 full day until battery died..Then I charged the phone for sometime and it continued its same funky routine of infinite rebooting and stopping at recovery Mode text.
But, eventually, after few hours, it booted normally to main screen.....But the problem was still there.
7) Now, even if try to shut down..from Power reboot/off screen...It shuts but in few seconds reboot again to main screen. So I cannot even shut it down.
8) I may try to download C.48 version (2.16 GB) and update from SD Card somehow..I don't know if it will revert back to different Version...But gotta try.
Or if there is enhanced or latest or custom update newer than C.49 available in market. maybe I should root or install that.
Frustrating...
How to get rid of this bug? I guess have to wait for new patch or something or next update. Service Centers are not open..because of Lockdown in Mumbai.
Please help, if someone knows the solution or had to deal with similar issue.
Click to expand...
Click to collapse
Alright, Is Your Bootloader Unlocked?