How would I update my x10 to 2.1 on AT&T in the U.S?
SEUS does not show that there is an update
TannerGolden said:
How would I update my x10 to 2.1 on AT&T in the U.S?
SEUS does not show that there is an update
Click to expand...
Click to collapse
This has been discussed many, many times on here and elsewhere. AT&T did NOT release the 2.1 update yet. If you are impatient, you can go here and flash the X10a world generic firmware. http://forum.xda-developers.com/showthread.php?t=825201
^^^^^^^^^
I'm a USA AT&T customer. I used that and I have had no problems that were not my fault in the first place
I to am on at&t I flashed 2.1 generic onto my phone no problems just remember to put your apn's in ajd you will jave 2.1 enjoy
Sent from my X10a using XDA App
Thread moved to Q&A.
A question for those more informed than myself
Hey Guys, wondering if you all could help me out.
I Updated my Xperia X10a on At&t using the flash method and now I cannot connect to the network... I've been looking around, but I cannot find any hits for my issue.
Basically when I go to Mobile Networks and search, it finds the AT&T Carrier, but when I click it and it tries to register it says "Your SIM card does not allow a connection to this network"
Just stumped, that's what I am...
anubis6329 said:
Hey Guys, wondering if you all could help me out.
I Updated my Xperia X10a on At&t using the flash method and now I cannot connect to the network... I've been looking around, but I cannot find any hits for my issue.
Basically when I go to Mobile Networks and search, it finds the AT&T Carrier, but when I click it and it tries to register it says "Your SIM card does not allow a connection to this network"
Just stumped, that's what I am...
Click to expand...
Click to collapse
You need to set your APN settings
Go to settings --> wireless & netwroks --> mobile networks --> access point names and creat a new APN as follows:
<name> att
<apn> wap.cingular
<proxy> wireless.cingular.com
<port> 80
<username> not set
<password> not set
<server> not set
<mmsc> http://mmsc.cingular.com
<mms proxy> wireless.cingular.com
<mms port> 80
<mcc> 310
<mnc> 410
<apn type> not set
I tried before to put an APN in, but with slightly different settings (username and passwords)...
Anywho, I tried your settings, I go to APN's and hit menu > New... Fill out all your information, then hit menu > save... It goes back to the blank apn screen... is that normal? or shouldn't it show the new one I just made?
anubis6329 said:
I tried before to put an APN in, but with slightly different settings (username and passwords)...
Anywho, I tried your settings, I go to APN's and hit menu > New... Fill out all your information, then hit menu > save... It goes back to the blank apn screen... is that normal? or shouldn't it show the new one I just made?
Click to expand...
Click to collapse
You can then go back and choose it as your default. The settings I have are 100% working.
If that does not work, try repairing your firmware with SEUS.
the screen after you click "Access Point Names" just says "APNs" at the top. When I make a new one, it doesn't show up... ideas?
Also, if I restore with SEUS, will it restore 2.1? or back to 1.6?
anubis6329 said:
the screen after you click "Access Point Names" just says "APNs" at the top. When I make a new one, it doesn't show up... ideas?
Also, if I restore with SEUS, will it restore 2.1? or back to 1.6?
Click to expand...
Click to collapse
You will restore to whatever firmware you have right now. I suggest you do this first (restore using SEUS) then enter your APN settings.
Okay, so I have done a repair through SEUS and gotten back to where I was...
Same issue... I can get into the APNs area and create a new one, but it doesn't seem to save... there is a blank area where I know there should be a list.
Also, let me express my appreciation that you are taking the time to help me.
anubis6329 said:
Okay, so I have done a repair through SEUS and gotten back to where I was...
Same issue... I can get into the APNs area and create a new one, but it doesn't seem to save... there is a blank area where I know there should be a list.
Also, let me express my appreciation that you are taking the time to help me.
Click to expand...
Click to collapse
Weird. OK try Settings --> Sony Ericsson (should be top option in the menu). Make sure you are connected to a WiFi network and try downloading the settings from SE servers.
Lol... Okay so when I go to the sony ericsson thingy...it says "could not download settings. Retry?"
I'm on wifi and I'm able to browse the internet on the phone
anubis6329 said:
Lol... Okay so when I go to the sony ericsson thingy...it says "could not download settings. Retry?"
I'm on wifi and I'm able to browse the internet on the phone
Click to expand...
Click to collapse
Hmmm..
This is a weird problem. So in your APN settings you have no profiles at all?
anubis6329 said:
Hey Guys, wondering if you all could help me out.
I Updated my Xperia X10a on At&t using the flash method and now I cannot connect to the network... I've been looking around, but I cannot find any hits for my issue.
Basically when I go to Mobile Networks and search, it finds the AT&T Carrier, but when I click it and it tries to register it says "Your SIM card does not allow a connection to this network"
Just stumped, that's what I am...
Click to expand...
Click to collapse
Guys, it is not APN issue - it says "Your SIM card does not allow a connection to this network". I had the same message before unlocking mine. But maybe I have a working hunch. When I received mine locked to TMO UK phone and tried my TMO US SIM, it just stuck on screen with network unlocking key input that is the way locked phone behaves under 1.6. But I blew away dust from my old proxy SIM card for unlocking iPhone 2008 and it worked! I was glad to save some bucks, but when I flashed 2.1, after around 16 hours I got the same error message about network and no service anymore. I had contact issue with this proxy card, so I tried several times and eventually broke it, so now I am unable to research it deeper. Without this proxy SIM card my phone behaved differently - it wanted network unlock code just after turning on. With proxy it booted silently and just showed that the network is unreachable. So I see exactly the same behavior in your phone as mine with proxy SIM card. It sounds weird and I didn't find another case like mine, but look like some way your phone is locked. I remember when iPhone wasn't cracked yet, some phones were hardware unlocked by installing some proxy cards inside the phone (by soldering), so you just need to insert your own card and it worked like unlocked. It is the only logical explanation for me now. How did you get your phone? If it is officially from ATT store, just replace it. If not - Houston, we have a problem.
No, its nothing like that... The phone is a stock att phone from an att store... It was working previously just fine and this whole mess started aster I flashed it to 2.1...
Could I have missed something while flashing I wonder?
anubis6329 said:
No, its nothing like that... The phone is a stock att phone from an att store... It was working previously just fine and this whole mess started aster I flashed it to 2.1...
Could I have missed something while flashing I wonder?
Click to expand...
Click to collapse
Probably not. The only thing is getting the APN settings and all should be working fine. This may be dumb, but are you sure you are entering all the info correctly and then saving the settings. You should then choose it as your default APN.
batman_112 said:
Probably not. The only thing is getting the APN settings and all should be working fine. This may be dumb, but are you sure you are entering all the info correctly and then saving the settings. You should then choose it as your default APN.
Click to expand...
Click to collapse
There arent any APN settings in there and when I attempt to create a new one, it doesnt save
anubis6329 said:
There arent any APN settings in there and when I attempt to create a new one, it doesnt save
Click to expand...
Click to collapse
So one more time:
Settings --> Wireless & Networks --> Mobile Networks --> Access Point Names.
Then press the far left button with the 4 boxes on top of it and click New APN and enter the settings as mentioned earlier.
If not, then try a hard reset. Remove the battery while the phone is still on, remove the SIM card and wait 10 minutes before putting it back in and turning on the phone.
Related
How can I change my mms settings. when I open messages and the click settings then click connection settings it shows the settings but will not let me edit them can anyone help with this thank you
I belive there is a way to edit these settings via cdma workshop but i dont know too much about that
I cant get the phone to connect to the work shop
Does anybody know if they have rooted this phone yet I read the forum about it it does seem like they have yet
Root is a work in progress.
What are you messing with your settings for? if your having issues just run *288 and let it do it. if that doesnt work use the RUU Update, and then reprogram your phone and use *288
I cant I have the Eris running on Cricket I have the phone, internet, text and the market running great but would like to have mms
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
FireSokar said:
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
Click to expand...
Click to collapse
I'll take another order of that link as well.
Who wants to BET hes talking about the MOTO Droid...
FireSokar said:
Who wants to bed hes talking about the MOTO Droid...
Click to expand...
Click to collapse
Quit trying to correct me in every forum i post in.
FireSokar said:
Quit trying to correct me in every forum i post in.
Click to expand...
Click to collapse
Talking to me? If so, I meant that as I'm confused as to whether he did mean the Droid or not.
Nice ASSumption though.
Change PRL, network settings
dial ##778 then edit settings
so some body finde out how he did to make it work on criket?
wat about using APN Backup & Restore?
deseo said:
so some body finde out how he did to make it work on criket?
Click to expand...
Click to collapse
no, as above, edit security settings in epst
uhhh, yoo hooo! guys, the htc based android phones are dirt simple to program for use on another network..
I've had my eris running full on alltel over two months now with the unl. data plan. Never looses 3G, alltels 3G coverage is wicked sweet.
Getting Voice & SMS working:
Get current .PRL file for your network(alltel, sprint, vzw, cricket, etc..), google for it. Mount your phone thru USB, drag the PRL to the root of the SD card.
Unmount
Dial##PRL
Enter SPC code
Select PRL from SD
Restart Phone
Activate phone with your carrier, lie about what phone it is, i told alltel i'm a Samsung Delve, a phone they have.
They'll tell you to *228 it, this will work perfectly after you've programmed the PRL described above.
Hang up with them.
Getting data to work:
Dial ##PST send.
Enter SPC code
Go to security...
Google for those settings for your carrier and enter all that is asked for in that menu screen.
Do nothing else, restart the phone.
Now, setting up MMS on the Eris is a pain, I still can't get it.
When going to Messages, Settings, Connection settings, ... i am not allowed to edit those settings, they're stuck at vzw values.
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
stevey500 said:
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
Click to expand...
Click to collapse
It's probably just allowing you to input settings but unable to save them due to lack of permissions. Looks like MMS is screwed until root gets here :\
how do you get web working on crickets network ive change the settings from the security but still no luck.
I have a new what i was told is an unlocked atrix on the sasktel network. i can call and text but i can't save my apn settngs to get my internet working. the wifi works fine but not the network one. please help, my provider won't
What are your current APN settings? Go to Settings >Wireless & networks > Mobile Networks>Access Point Names
Neither will mine. Unlocked Bell Atrix on MTS.
I have no APNs listed, and they never show up once saved.
Not sure what other network settings are..but I'm unlocked on Telus and my apn settings are: sp.telus.com
When I first entered them I had so.telus.com and had phone and SMS but no mobile data until I realized my typo.
Lineman69 said:
I have a new what i was told is an unlocked atrix on the sasktel network. i can call and text but i can't save my apn settngs to get my internet working. the wifi works fine but not the network one. please help, my provider won't
Click to expand...
Click to collapse
Hello buddy,
i had the same problem and the solution that i found is to set a new apn and just set the following choices
1. Name
2. Apn
3. port
All other choices left blank.
I did that and it works perfect.
nsourm said:
Hello buddy,
i had the same problem and the solution that i found is to set a new apn and just set the following choices
1. Name
2. Apn
3. port
All other choices left blank.
I did that and it works perfect.
Click to expand...
Click to collapse
Tried that.....i can enter all the settings that is fine. but as soon as i click the menu button to "save" it goes back to the main page and shows no APN settings saved
Are you rooted?
If yes try to change the /data/data/com.android.providers.telephony/telephony.db add the apn in there
no i am not rooted i did not want to do that till i knew i got everything running.
I tried and tried to get the Bell Atrix to work.
APN Manager: no luck
Network Info II: no effect when settings changed either in OS or APN manager.
Whenever an APN was typed in, it would "save" (proven by APN Manager) but not be selectable, it just disappears once menu-save.
Returned it and purchased a Nexus S, took all of a minute to get data working.
Lineman69 said:
Tried that.....i can enter all the settings that is fine. but as soon as i click the menu button to "save" it goes back to the main page and shows no APN settings saved
Click to expand...
Click to collapse
Perhaps i didn't explain correct.
Make a new apn change the first four choices and left the other unchanged(not blank)
_Dennis_ said:
Are you rooted?
If yes try to change the /data/data/com.android.providers.telephony/telephony.db add the apn in there
Click to expand...
Click to collapse
i am rooted now. can you explain this method a little bit for me
i cant just change the first four because the MCC and the mnc are not registering i have to enter them manually. my provider says it is not reading them from the sim card for some reason. i rooted the phone now. i am going to try getting into it from there
The easiest way I found was download SQLite editor. Its a few dollars. Then open it and click yes for root. Go to dialer storage then telephony.DB. then carriers. Add your apn to the list. If eceything is correct it should work. If the phone does not read the mcc then you may be screwed though.
Sent from my HTC Desire using Tapatalk
Lineman69 said:
i am rooted now. can you explain this method a little bit for me
Click to expand...
Click to collapse
(all settings I left blank, leave blank, make sure you press menu, save to save)</br>
2) Enable Airplane Mode
(hold power button for three seconds, select Airplane Mode)
3) Open Root Explorer
4) Navigate to: /data/data/com.android.providers.telephony/databases/
5) Click on "telephony.db"** (this should open the db using SQLite Editor)
6) Select "carriers"
7) You should see a long list of APN settings for various carriers, Push the menu key to bring up the menu. Then goto new record and fill out the details from there. Make sure that the _id is sequential from the other records.
8) Press back twice to close the SQLite editor and you should be back in Root Explorer. Close Root Explorer.
9) Disable Airplane Mode
Modified from http://forum.xda-developers.com/showthread.php?t=980636
WARNING: HAVEN'T TESTED BUT SHOULD WORK
I tried the methos above when it comes to the searching the network part i get a network error because i am in airplane mode
Oh i did not have the sqlite thats why. Going to try again
ThInk i might have got it. Will know sooN
Lineman69 said:
Ok almost got it but what do you mean by
Make sure that the _id is sequential from the other records.
Click to expand...
Click to collapse
there is an _ID collum on the far left that goes from 1 to 80ish on my phone so when u fill that out im assuming you will have to make it sequential. 1 2 3 ... 85 etc etc
Ok i finaly got in there my carriers setting were in there but i added a new one with the new settings and i still have nothing
well my only other sugestion is to flash the 1.2.6 sbf and then OTA update to 1.5.7
follow http://forum.xda-developers.com/showpost.php?p=12631216&postcount=2911
http://forum.xda-developers.com/showthread.php?t=1016060
to keep root and install custom rom if that is also what you fancy
Hey guys/gals. I just Odined Simply Honey 3.8 Revolution light to my phone but i don't have data. Wifi seems to work and i have tried rebooting the phone. Is there something I missed?
dbg17891 said:
Hey guys/gals. I just Odined Simply Honey 3.8 Revolution light to my phone but i don't have data. Wifi seems to work and i have tried rebooting the phone. Is there something I missed?
Click to expand...
Click to collapse
settings > wireless and network > mobile network > access point names > t-mobile
apn type: internet and mms
under access point names its blank. I can add a new apn but im not sure what all to add as far as proxy, port, user name, pass, server, ect...
edit: I got it to work thank you.
Also lost Data after flashing Wifi Calling app ...can't change settings in Mobile networks
think I've lost baseband...(whatever that means...basically phone won't recognize a sim card is loaded) is there a way to fix this without Oding ?
Does the phone say there's no SIM card inserted? If so, run to any T-mobile store and ask for a new SIM.
Also, I was having data issues two days ago. I keep a copy of the KB5 modem that's flashable in Recovery. Just re-flash and all was good.
T-mobile APN address:
epc.tmobile.com
Wish I could attach the KB5 file for ya, but I can't. Just search for it.
Sent from my GT-I9000 using XDA Premium App
i dont know much about apn?
but under my apn it says simple and under that
it says tmobile us
But simple is the one thats highlighted But when i try to select tmobil us it sends me to page with lots of info like proxy and port #etc...
I get data connection with simple but i think my data connection would be better with tmobil if i could get that to work.
anyone know how to do this????????? how do u fill out the apn page with what info do i put in?
or know wht simple means??????????
Apn type, wht do i put there?????
I need some help with my phone, I cannot send any mms. I have tried numerous apn settings.. Alot of the apn settings I see include the "mms protocol" although the atrix does not have that in the settings, what are the correct settings that I should be using? And what else could be an option for the phone to work?
missy_89 said:
I need some help with my phone, I cannot send any mms. I have tried numerous apn settings.. Alot of the apn settings I see include the "mms protocol" although the atrix does not have that in the settings, what are the correct settings that I should be using? And what else could be an option for the phone to work?
Click to expand...
Click to collapse
reset your apns and see if that works
Yep have done that, nothing seems to be working, could it have something to do with the fact the phone came from hong kong? :/ and I'm trying to use a telstra sim in aus? The phone was unlocked when I recieved it too.
Thanks
missy_89 said:
Yep have done that, nothing seems to be working, could it have something to do with the fact the phone came from hong kong? :/ and I'm trying to use a telstra sim in aus? The phone was unlocked when I recieved it too.
Thanks
Click to expand...
Click to collapse
could possibly what software are u runing detailed ,roots, bl unlock, what...
Í haven't modified it any way I know that is an unlocked AT&T model, and the mobile network state is disconnected?
Stupid question.. but do you have Data enabled?
Menu>Settings>Battery & data manager>Data Delivery
Make sure "Data Enabled" has a check mark...
Yep it sure is, have tried numerous settings including apn, even copied the apn setting from another atrix on telstra still no help. Guessing it may be a faulty phone maybe. But thanks for the help
i updated my x10i to 2.3 and everything was great and i could send and recieve sms.
after a day of having gingerbread now i cant send any sms but i can receive. every time i send its stuck on "sending". if i reboot my phone it does send it though but on the 1 sms that was in queue for sending.
then i installed wolf's rooted 2.3 and everything was working again but on the second day it started happening again and i cant send sms again, only receive.
im on t-mobile usa..
PLEASE HELP!
I'm on T-Mobile USA and haven't had any issues with SMS since the GB 2.3.3 came out. Well, I'm unsure yet if I can receive full sized mms (always a problem with TMO on non-TMO phones)
It's a silly thing to double check, but have you downloaded the APN settings for Tmobile USA? If you don't, the default 'Telkilla" or whatever it's called is on. I can still get 3G on TMO usa with it...
Go to settings, click on 'Sony Ericsson' (very first one), and then click on "Settings download"
To double check: go to settings, click on "Wireless & network settings", click on "Mobile networks", click on "APNs"
Problem solved.
My sim card got screwed up so I replaced it with a new one.
After leaving my old Sony with this sim card in the washing machine las year I'm surprised it worked till today lol.
Thanks anyway=]
Sent from my X10i using XDA App
mety333 said:
Problem solved.
My sim card got screwed up so I replaced it with a new one.
After leaving my old Sony with this sim card in the washing machine las year I'm surprised it worked till today lol.
Thanks anyway=]
Sent from my X10i using XDA App
Click to expand...
Click to collapse
It's good to know the issue is fixed. I have 0 problem sending text from my rooted 2.3.3 X10i.
Same problem
So I upgraded to 2.3 and does not send text after 2 days changed the sim card 3 times already and it works for 2 days then stops working if I reflash it then it works for 2 days then stops I have changed the apn that does not change anything and I have not rooted the cell phone yet but world like to if there is anything that I can do otherwise I will have to get a new phone cause don't want to downgrade back to 1.6
webafile said:
So I upgraded to 2.3 and does not send text after 2 days changed the sim card 3 times already and it works for 2 days then stops working if I reflash it then it works for 2 days then stops I have changed the apn that does not change anything and I have not rooted the cell phone yet but world like to if there is anything that I can do otherwise I will have to get a new phone cause don't want to downgrade back to 1.6
Click to expand...
Click to collapse
You need to set up your wireless apn go to:
menu/settings/wireless & networks/mobile networks/network mode/gsm/wcdma preferred (click it)
Then Back button/Back button/sony ericsson/settings download then wait a few you will see it (3g/H) flash on (you do not have to click it it's just saying that is your network) then go to:
Back button/wireless & networks/mobile networks/access point name. there should be two apns
one wireless/one mmsc. if for some reason you have three make sure that the top one (the house icon 3g) is checked or you will be roaming
And always remember to backup your Settings and APNs,and anything else you need to keep. There are free apps on the market to do that but the pro/key versions have more settings and help the developers and no adware. Hope this helps if not all be here tomorrow or i'm sure someone else will help too i do have some apns just tell us what network your on an we can help you set them up. Good luck
well i did every thing that you told me and i got an epc.tmobile.com and an wap.voicestream.com but still not sending out texts and i am on the tmobile
Figured it out it was my visual voice box from tmobile turned it off and they started sending again so if anyone else has the same problem as me try that