Is it possible to port the app to other ROMS like MIUI and such?
Sent from my HTC Glacier using XDA App
No. It relies on HTC framework and integrated tightly with T-mo bloat.
can it be ported to Desire Roms you think?
Cloudscout on the CM forums was able to port to CM ROM, so I guess it's possible with other ROMs as well.
This is his original post:
Here's what you need to do:
BEFORE YOU INSTALL CYANOGEN MOD you must back up the Genius Button apks and libraries. To do this, you must have the Android SDK as it will require ADB*. If you don't know how to set that up, you'll have to do some studying.
1) Enable debug mode on your phone.
2) Connect the phone to your computer via USB.
3) From the platform-tools directory inside the Android SDK directory, run this command "adb pull /system/lib/libvsuite.so"
4) Run "adb pull /system/lib/libvsuite_sharedlib.so"
5) Run "adb pull /system/app/vsuite.apk"
6) Run "adb pull /system/app/VSuiteApp.apk"
You will now have copies of the two library files and the two apk files necessary for Genius Button and Dragon Dictation.
Now, go ahead and follow the process described in the Wiki to install CM on your phone. Once that is finished, follow these steps:
1) Enable debug mode on your phone.
2) Connect the phone to your computer via USB.
3) From the platform-tools directory inside the Android SDK directory, run this command "adb remount"
4) Run "adb push libvsuite.so /system/lib/libvsuite.so"
5) Run "adb push libvsuite_sharedlib.so /system/lib/libvsuite_sharedlib.so"
6) Run "adb push vsuite.apk /system/app/vsuite.apk"
7) Run "adb push VSuiteApp.apk /system/app/VSuiteApp.apk"
8) Run "adb remount"
9) On your phone, launch ROM Manger and select "Fix Permissions"
10) Once it finishes running the permissions fix, reboot your phone.
The first time you trigger voice dialing via bluetooth, you will get an option screen that asks you if you want to complete the action with Genius Button or Voice Dialer. Check the box that says to always use this selection and then choose Genius Button. Also note, the first time you try to compose a text message, you will be presented with the license agreement for Dragon Dictation. You will need to tap the screen to accept the license. After that, it should work normally.
mr.tenuki said:
Cloudscout on the CM forums was able to port to CM ROM, so I guess it's possible with other ROMs as well.
This is his original post:
Here's what you need to do:
BEFORE YOU INSTALL CYANOGEN MOD you must back up the Genius Button apks and libraries. To do this, you must have the Android SDK as it will require ADB*. If you don't know how to set that up, you'll have to do some studying.
1) Enable debug mode on your phone.
2) Connect the phone to your computer via USB.
3) From the platform-tools directory inside the Android SDK directory, run this command "adb pull /system/lib/libvsuite.so"
4) Run "adb pull /system/lib/libvsuite_sharedlib.so"
5) Run "adb pull /system/app/vsuite.apk"
6) Run "adb pull /system/app/VSuiteApp.apk"
You will now have copies of the two library files and the two apk files necessary for Genius Button and Dragon Dictation.
Now, go ahead and follow the process described in the Wiki to install CM on your phone. Once that is finished, follow these steps:
1) Enable debug mode on your phone.
2) Connect the phone to your computer via USB.
3) From the platform-tools directory inside the Android SDK directory, run this command "adb remount"
4) Run "adb push libvsuite.so /system/lib/libvsuite.so"
5) Run "adb push libvsuite_sharedlib.so /system/lib/libvsuite_sharedlib.so"
6) Run "adb push vsuite.apk /system/app/vsuite.apk"
7) Run "adb push VSuiteApp.apk /system/app/VSuiteApp.apk"
8) Run "adb remount"
9) On your phone, launch ROM Manger and select "Fix Permissions"
10) Once it finishes running the permissions fix, reboot your phone.
The first time you trigger voice dialing via bluetooth, you will get an option screen that asks you if you want to complete the action with Genius Button or Voice Dialer. Check the box that says to always use this selection and then choose Genius Button. Also note, the first time you try to compose a text message, you will be presented with the license agreement for Dragon Dictation. You will need to tap the screen to accept the license. After that, it should work normally.
Click to expand...
Click to collapse
I am running Miui . Do you think this process will work for it? Also I don't have stock anymore can anyone send me the libraries so I can try it out.
Sent from my beautiful mind
hydrogenman said:
can it be ported to Desire Roms you think?
Click to expand...
Click to collapse
Gr8Gorillas DHD port has the genius button on it
Could someone who is running a stock rom with genius pull these files for me?
Sent from my beautiful mind
forum doesn't let me upload for some reason - send me a PM and I'll mail you the files.
I will try to make a zip file later for easier install.
Here is a link to zip that will install the genius button on you ROM. Tested on CM 6.1.2 RC2 and working.
genius button update
Just copy to the root of your sdcard and install from ROM Manager or recovery.
Thanks but didn't work with the miui rom I am using
Sent from my beautiful mind
Nevermind. I see now. Its an app on my desk top. Now I have to remap button to it
Sent from my beautiful mind
Genius Button Attempt
mr.tenuki said:
Here is a link to zip that will install the genius button on you ROM. Tested on CM 6.1.2 RC2 and working.
genius button update
Just copy to the root of your sdcard and install from ROM Manager or recovery.
Click to expand...
Click to collapse
Tried to flash it but was unsucessful..
Do you have "Genius Button" application?
This one does not map a key to the app, it just installs it.
Will this work with cm7
mr.tenuki said:
Here is a link to zip that will install the genius button on you ROM. Tested on CM 6.1.2 RC2 and working.
genius button update
Just copy to the root of your sdcard and install from ROM Manager or recovery.
Click to expand...
Click to collapse
Sent from my HTC Glacier using XDA App
foriesg said:
Will this work with cm7
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I am on miui and it worked for me
Sent from my beautiful mind
foriesg said:
Will this work with cm7
Click to expand...
Click to collapse
I tried it via web yesterday with no luck. I kept getting force closes. I gave up pretty quickly though.
bittermormon said:
I tried it via web yesterday with no luck. I kept getting force closes. I gave up pretty quickly though.
Click to expand...
Click to collapse
try running fix_permissions and see if that helps.
Genius APK Please
Can someone do a adb pull and provide me with the genius button apk?
Thanks in advance..
The genius button is not one apk, it is 2 apps and 2 libs. In order to get it running you need to push both .apk files to /system/app and both .so files to /system/lib.
If you want to do it manually, unzip the zip file I created and take the files from there.
Sent from my HTC Glacier using XDA App
Ok will try the manual way. Thanks
Sent from my HTC Glacier using XDA App
Related
How-TO Root the
HTC Slide
HTC Aria + See this Link > http://forum.xda-developers.com/showthread.php?t=708233
&
Nexus One
Works With ALL 2.1 HTC PHONE"S with 2e Recovery!
Must be able to See the Device From the ADB in recovery for it to work!
See this Thread if you Have a New Slide or Updated the OTA to version 1.35.531.1
http://forum.xda-developers.com/showthread.php?t=754669
If at anytime You have Trouble or Can't get my Method to work, Please see wesgarner's [Root] SimpleRoot v1.3 (Linux/Windows)
Link > http://forum.xda-developers.com/showthread.php?t=713347
Just use my Update.zip if you just want root only
Download This Package > Root.zip
*EDITED* 6/29/2010 Update Now Contains Su & Superuser.apk. Permission Fixed on SU / Sh as well
-Contains Dusty51 script for Partitioning the a2sd & Swap
-fstab install so swap will work
-Default partition table's are:
-Linux Swap @ 32mb
-ext2 a2sd partition @ 512mb
-Fat32 Partition is based on the size after the 2 above
How-to Use:
Once You load the Recovery via update.zip, Unplug & Plug the USB to make sure the Device is Seen..
- Open Command Prompt from Computer
- Adb shell
- sdparted
- Next Follow the Command, y = Y to confirm..
Note: Backup your SDCARD first, only thing should be on it is the update.zip then Follow the above to Format for a2sd support!
Click to expand...
Click to collapse
Stratis1978 said:
I've got root now and just wanted to repeat what made the difference for me (also posted pages back):
when you're ready to run recovery in the bootloader be sure to unplug the USB from your phone until 'HBOOT' not 'HBOOT USB PLUG' displays.
So basically you unplug the phone until 'HBOOT' appears, have 'RECOVERY' highlighted, and plug the phone in a moment before you select 'RECOVERY'.
The moment I did that I had 'recovery' displaying in my loop.
Continue with the directions...
Click to expand...
Click to collapse
How-TO Root the Slide
First!! - Go to Settings > Application > Development and turn on USB Debugging. This should save you headaches.
NOW… Power Off the Slide
Step 0.
Un-zip the Package you Downloaded
Step 1.
Place the Contents of "update.zip" & "ota.zip" & "loop" into your Android SDK Tools folder.
Step 2.
Open Command Prompt or Terminal and CD to the SDK/Tools Directory.
Step 3.
Power on the Slide into the bootloader by Holding Down ( Volume Down + Power Button )
Step 4.
Now run your loop file from the prompt (either type "loop" in windows or "./loop.sh" in a *nix like) ( ./ Is used For OSX )
Step 5.
Once your loop is running in your prompt, select Recovery from the bootloader menu.
Step 6.
When recovery loads, you should Have an Offline Device. You can use ctrl+c to stop your script & see.
If this doesn't happen, Power Off and try again..
Step 7.
Un-plug your USB cable from the back of your phone & Plug it back in for it to Detect ADB Correctly!!! This is an important step. At this point you can adb devices to see if you can see your device and that it is in recovery mode.
Step 8.
Hit Volume Up + Power button to Bring up the Selectable Menu
Select Update.zip from the menu. (This will fail, but we already know that! Select it anyway).
Step 9.
adb push ota.zip /sdcard/update.zip (*OSX users add a ./ in front of all terminal commands please.)
Step 11.
This is Very important!! Have this Command ready in your prompt before applying update.zip again!!
This is the Command, We do not Push this Yet adb push update.zip /sdcard
Click to expand...
Click to collapse
step 12.
Hit run update.zip, as soon as you see a Little Bar appear under the text, push Enter to execute the command in your prompt (adb push update.zip /sdcard )
Step 13.
In successful, you should see Clockwork Recovery & you Now have Su & Superuser.apk Installed! You can Now Reboot Your Phone into the OS to verify.
If unsuccessful, repeat steps 11 & 12.
Congrats.
Next Guide For Flashing the ENG-BUILD with Test-key Recovery http://forum.xda-developers.com/showthread.php?t=703076
Updating the Radio Once Everything Is Done http://forum.xda-developers.com/showthread.php?t=705064
Special Thanks to:
Paul O'Brien: > http://android.modaco.com/forum.html
Koushik K. Dutta: His ClockWorkMod Recovery can Be found here > http://www.clockworkmod.com/
&
http://unrevoked.com/ OTA Spoofing Method
&
ChiefzReloaded for Huge amount of Suggestion & Brain Storming.
GREAT JOB!
Thank you sir, for your diligence, and hard work! Let's get to work boys!!!
Tips: May want to be a little more clear on "SDK Directory". Some may think that you "must" have this directory, but all that is important to know is that you know the directory where the contents were placed... If that IS the case, then I'd mention that...
Also, might be important to mention the phone should already be plugged in, and should have prerequisite of ADB working...
Thaaaaaaank you! got some fun stuff to do right after work now
Re: How-TO * Root The Slide * *6/15/2010*
Thanks guys. You've made a lot of people happy.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Having trouble at step 5. ADB works when the phone is powered on. However, when in Recovery, adb devices list is blank.
Other problems: is Step 8 really a step? It says to select Update.zip... is this just anecdotal, as in "Now we will select an update.zip"...?
And how are you "selecting" things in Recovery? My recovery simply has the phone with a triangle...
What is ADB i come from rooting g1 and i dont remember or know what it is i rooted my g1 when it first came out and every since then all i had to do is name file update then push. could u be alittle more clear for a retard like me I dont want to miss my phone up when i just got it today, I really want to get rid of some of the bloatware on it tho
richierich118 said:
What is ADB i come from rooting g1 and i dont remember or know what it is i rooted my g1 when it first came out and every since then all i had to do is name file update then push. could u be alittle more clear for a retard like me I dont want to miss my phone up when i just got it today, I really want to get rid of some of the bloatware on it tho
Click to expand...
Click to collapse
ADB is part of the Android SDK, you'll need to download it and extract it to your PC before you can use it.
http://developer.android.com/sdk/index.html
My problem may be that I'm using a Mac, but I cannot get my Terminal to recognize the "loop" command. I've tried many things and it won't work properly just keeps giving me errors. I'm gonna keep trying though.
android007 said:
My problem may be that I'm using a Mac, but I cannot get my Terminal to recognize the "loop" command. I've tried many things and it won't work properly just keeps giving me errors. I'm gonna keep trying though.
Click to expand...
Click to collapse
Loop is just a batch file (.bat). I don't know about Macs using batch files. All it's doing is looping the "adb devices" command to see if it detects the device.
fermunky said:
Having trouble at step 5. ADB works when the phone is powered on. However, when in Recovery, adb devices list is blank.
Other problems: is Step 8 really a step? It says to select Update.zip... is this just anecdotal, as in "Now we will select an update.zip"...?
And how are you "selecting" things in Recovery? My recovery simply has the phone with a triangle...
Click to expand...
Click to collapse
You have to Repeat then... It Don't always work everytime!! That's why I said Repeat.. You have to Power Off, run loop & if you see now Devices then you have to Repeat again!!
You Must boot into bootloader First!! Run Loop, Then to Recovery!
my computer doesn't find the device in recovery mode. Any advice on getting around this? adb works when phone is on.
eugene373 said:
You have to Repeat then... It Don't always work everytime!! That's why I said Repeat.. You have to Power Off, run loop & if you see now Devices then you have to Repeat again!!
Click to expand...
Click to collapse
Wow, cant believe I missed that order. May need to update the how to though... it says to run loop, then go to bootloader, then to recovery. You need to add a step after getting into bootloader of "Wait for device to be listed, then goto recovery"... or similar.
My error when trying to invoke the loop file:
: command not founde 1: :TOP
sdk/tools/loop: line 2: adb: command not found
sdk/tools/loop: line 3: GOTO: command not found
Click to expand...
Click to collapse
Sweeeet! Awesome job guys.
On Mac replace the loop.bat with loop.sh and change the contents of the file to the following:
#!/bin/bash
while [ 1 ]
do
adb devices
done
On the command line, run "chmod 755 loop.sh" to give it execute permission. To run the file type "./loop.sh"
Are there any roms for it yet?
android007 said:
My error when trying to invoke the loop file:
Click to expand...
Click to collapse
You have not added the tools directory to your PATH system variable. Explained on the SDK page. Also, you don't need to be in the /tools folder, just go to the folder you extracted the files to.
Eugene, I noticed while the loop was running, I chose recovery, and on one instance, I saw an offline device, but then subsequent loop commands, it stopped listing them. Also, it is still not clear what to do on Step 8. Most of us only see an image in recovery, no menus.
With no menus, anyone know how to reboot the phone in recovery other than removing the battery?
marvinp said:
On Mac replace the loop.bat with loop.sh and change the contents of the file to the following:
#!/bin/bash
while [ 1 ]
do
adb devices
done
On the command line, run "chmod 755 loop.sh" to give it execute permission. To run the file type "./loop.sh"
Click to expand...
Click to collapse
you think you can do quick little rewrite of the tutorial for us mac users
Notice:
Click to expand...
Click to collapse
Sorry guys this no longer works...
Ubuntu removed alot of the files needed to run it on a phone off of their website which is why you are getting the errors on the script to try and install it.
Recapped:
Here's what I mean the website the script is going to to get the files no longer exists...
Heres an example to see for yourself: http://ports.ubuntu.com/ubuntu-ports/pool/universe/t/tightvnc/tightvncserver_1.3.9-4_armel.deb
I will try and find a new link to plug in but for now it DOES NOT WORK!
Thank you for your patience on the thread,
StrumerJohn
==== How to Install Ubuntu Linux on your HTC EVO 3D / Sensation 4G ====
Table of Contents
Post 1
1: Disclaimer
2: Pre Requirements
3: PC Guide to push to phone
4: MAC Guide to push to phone
5: Additional Scripts
6: Credits
Post 2
1: FAQs
2: Recognitions
Post 3
1: News and Updates
2: Additional Notices
Click to expand...
Click to collapse
-Disclaimer-
This has been tested on my phone and runs perfectly fine, I am not responsible for you breaking, bricking, or dropping your phone on the floor and causing the USB cable to fall out and blow up your device.
Pre Requirements:
A rooted HTC EVO 3D or Sensation 4G
A S-off'd HTC EVO 3D or Sensation 4G
netarchy's kernel (Silverneedle Test5)
Android SDK
The USB drivers for your phone. (x32) (x64)
A microSD Card
2.3 GB Free of space on your microSD card
Know how to read to directions
Click to expand...
Click to collapse
The intense Procedure:
1. Download this version of Ubuntu. [Download #1] [Download #2]
2. Unzip the Ubuntu folder to your desktop and if you want, delete the compressed one you downloaded.
3. On your phone go to Settings > Applications > Development and turn on USB debugging.
4. Plug in your USB cable (from your computer to your phone) and mount your (mirco)SD card.
5. Move or copy over the unzipped / normal Ubuntu folder. This will take a long time unless you have a class10 microSD card.
6. After moving / copying that file over, tell your phone to unmount the (micro)SD card / Set the phone to Charge Only mode.
7. Now on your computer, go to where you have Android SDK installed. (Example on my computer: E:\Program Files (X86)\Android\android-sdk )
8. When in the main SDK folder, hold shift and right click a blank area and then click on "open command window here". It should of opened the command line window with the directory of your SDK already put in. If not type cd "C:\Your directory or location of your SDK"
9. Now type "cd platform-tools"
9.5. (Optional) "type adb devices" and check if the computer recognizes your phone. If not you need to reinstall your drivers from the download link above in the requirements.
10. Type "adb shell"
11. Type "su" so we have superuser permissions
12. Type "cd /sdcard" so the directory is changed to the (micro)SD card
13. Type "cd ubuntu" so the directory is changed to the Ubuntu File
14. Type "sh ubuntu.sh" so we can install Ubuntu
15. Type "bootubuntu" to start up Ubuntu. Next time you enter Ubuntu, you just need to type "bootubuntu" from your /sdcard/ubuntu directory, there is no need to run ubuntu.sh again.
16. If you got "[email protected]" in the command line, you have sucessfully installed Ubuntu. If not make sure you installed netarchy's kernel. If it still does not install correctly please try a different ROM, I have only tested this on SteelROM 1.1. *AFTER INSTALLING ANY ROM, YOU NEED TO REINTALL THE KERNEL.*
17. Now type "apt-get update" to update Ubuntu to the latest version. Then "apt-get upgrade" to apply the update.
18. Type "apt-get install tightvncserver" to install the vncserver. (Your telling your phone to read off it self pretty much.)
19. Type "export USER=root" To make yourself a user / the user
20. Type "vncserver -geometry 1024×800" to set the screen resolution you want to display on your phone. Remember you can always zoom in by pinching, so you don't need to make this that much smaller. You should also get prompted to set a password, do so. You will need to remember this password to log in.
21. Download the AndroidVNC Viewer off the Market here.
22. Open the viewer, and put in a nickname, your PASSWORD FROM ABOVE, and for the IP Address put: 127.0.0.1 for the port put 5901. THEN SCROLL DOWN and make the COLOR FORMAT 24-bit colors (4bpp).
And finally, hit Connect to launch Ubuntu on your phone!
For Mac users:
Finder -> Applications -> Utilities (folder) -> Terminal
When you cd to where your adb is located, cd is lowercase as are most all unix commands.
If you're unsure where to go, get to adb in your Finder, right-click, get info, the pop-up will show you the path. Note in unix that the folders (subdirectories) are separated by / and not by \ like in Windows.
Once you're there, the only trick you need to know is to tell unix that adb is located where you are, so you change the adb shell command like this:
./adb shell
That's about it, all other instructions once you're inside the phone shell are the same.
OBTW - after the unzip of the initial file from the OP, just drag and drop the whole ubuntu folder to your NO NAME drive (normal sd card formatting doesn't get a name at the factory, so by now you know that your sd card mounts like that anyways I'd suppose - just put it here in case).
Click to expand...
Click to collapse
Additional Scripts
Danaff37's
danaff37 said:
That's the script catted out.
I posted a different script a few pages back that I think will help you guys. I modified it so we should have no trouble with apps in sd.. I finally got a bigger sdcard so I can test this stuff and this script works great. Please guys try this script. If you download it in phone it will change the name and add a bin on it I think, so rename it accordingly and make sure it gets into /system/bin with the right permissions (755 or rwxr-xr-x), then run it
http://db.tt/gin57Gd
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Credits:
Ubuntu Modded and Guide by: Me
Mac Guide Written by: EarlyMon
danaff37's Script by : danaff37 (of course)
Original dev of Ubuntu: Zedomax
If you have any problems beside the slow downloads because of the blown up servers, let me know below. Also I tried to type this fast, so if there is any typo's or broken links let me know too! Thanks!
Also feel free to hit the Thanks button or Donate for more Guides
FAQS
FAQS
Do I need to have everything in the android-sdk downloaded and installed?
No, you just need to have the base sdk.
When I tell the command prompt to adb devices, my phone does not show up!!
Make sure you have installed the proper drivers for your phone and for your correct operating system
I'm not getting "[email protected]" when I type / copy-&-paste "bootubuntu"
Well, this could be for a various amount of reasons, first make sure you have a rooted HTC EVO 3D/Sensation. And by root, I mean a full root, not just a temp root or S-off. If you still do not get "[email protected]", flash your device (or go though your data folder and delete all the ubuntu files, then delete the ubuntu file off of your sd card and clear your caches.), and retry the above steps. If the problem still persists, then please PM me with your exact problem.
I'm having issues within the VNC, and I get an error message when I hit "connect".
Make sure you typed your password correctly, the passwords are case sensitive. If you still cannot get in, make sure your IP Adress is set to "127.0.0.1" and your Port(s) are "5901".
The colors on my screen look all weird and disorientated, how do I fix this?
Close Ubuntu, and re-open the VNC application, then scroll down to "Color Format" and tap on "24-bit color (4 bpp)".
The on-screen keyboard does not work and I get a different letter or character for whatever character I type!
The on-screen keyboard will work now, if you install LXDE.
I'm not good with reading text! I need a video demonstration!
For a video head here: http://www.youtube.com/watch?v=YbunTRzEQCI
How do I close Ubuntu?
Two options here:
1.Logout of the server and go to your homescreen and push menu, then go to settings, then Applications, then Running Services and close any remaining open part of the server program. The service may re-open later, do not close it though. It won't use up a noticable amount of RAM, just enough to make sure the application opens quick again.
2. Logout of the server and use your favorite task killer to close the server process. The service may re-open later, do not close it though. It won't use up a noticable amount of RAM, just enough to make sure the application opens quick again.
FAQS should be in order chronologically (until the end of them).
I would like to give a huge thanks to EarlyMon, for helping out lost members. This thread would not be as peaceful if it were not for him.
And it seems I have forgotten to list another VERY helpful person here, danaff37. I am really grateful to both of these two for all of the help and work they have done to aid others.
Am I missing a question that you are pretty sure is asked ALOT (lol)? Then PM me please and I'll get it up here ASAP!
Upcoming Change log for final release:
(StrumerJohn's Zedomax Ubuntu Mod)
Made a launchable .exe for easier updating and installing of Ubuntu
Default mode LXDE for fixed keyboard
Pushes Server application to your phone
Fixed a few problems that caused people to have an error in installing
Server application updated
Fixed port issues for log in errors
News update 11/13/11
Bad news and Good News:
Ubuntu was successfully updated
Update brakes keyboard
Update breaks Apps2SD
Update takes up less space (1GB instead of 2GB)
Update ONLY works on MIUI so far
Updated script to add work around for those facing issues
Computer .exe only working on x64 Windows 7 computers ;-;
Thank you for those of you testing! Might make this open Beta...!
Version as of 12/12/11
Alpha Build 1.0
What Doesn't Work so far:
Boots to latest version only to lock up phone (Unless you are running MIUI)
Keyboard borked
Doesn't work on ICS
Audio Broken
Apps Saved on SD
What works:
Everything else
Sweeeeet.
Appreciate my help? Thank me
Wow this is amazing! Never used linux before tho...
Haven't looked at the bootubuntu script yet, but I know a lot of these couldn't work if you had any apps on sdcard at all. Each app moved to sd takes a loop device.
Sent from my PG86100 using XDA App
maazing will try tonight!!!!!!
danaff37 said:
Haven't looked at the bootubuntu script yet, but I know a lot of these couldn't work if you had any apps on sdcard at all. Each app moved to sd takes a loop device.
Click to expand...
Click to collapse
Just moved partially like moving to the SD or Actually having them Downloaded and Installed to the SD?
Interesting. Nice write up
Sent from my PG86100 using XDA Premium App
Cool...
But, why.
Cause you can?
Sent from my 3vo via Tapatalk
Because Ubuntu has some computer applications you can't normally use on your phone. In the browser download Java and check out runescape runs like shizzle but once we get new quad phones out I'm sure it would run fine. lol
This is what I wanted. Million thanks....
Sent from my PG86100 using www.psvitahacks.co app
Added to my 'Complete LIST' thread: http://forum.xda-developers.com/showthread.php?p=16132451
StrumerJohn said:
Just moved partially like moving to the SD or Actually having them Downloaded and Installed to the SD?
Click to expand...
Click to collapse
Using the stock apps to sd like under manage applications (like the same as is available on a non rooted phone). The script for ch rooting can be made to work around it though. But most aren't.
Sent from my PG86100 using XDA App
danaff37 said:
Using the stock apps to sd like under manage applications (like the same as is available on a non rooted phone). The script for ch rooting can be made to work around it though. But most aren't.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If there are any small minor problems like that and it's not working proper, let me know. I'll mess around with some things and release a patch.
Installed successfully and works great except I can't type cause of the keyboard glitch. Anyway around it?
Sent from my PG86100 using XDA Premium App
Working with shooter rewind
akiradavis said:
Installed successfully and works great except I can't type cause of the keyboard glitch. Anyway around it?
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
The only way to get around it atm (at the moment) is to use a bluetooth keyboard.
Very sweet! I will test this tomorrow when I get home. It should work on my ROM as well
Nice....can't wait for the keyboard fix.
Does anyone else have the issue where the Clockwork mod wont install. I have tried using rom manager, and did the terminal and pushing the blob file through but it just refuses to install. All the transformer does is give me a logo. The next step i tried is using the Goo manager to install the recovery but same thing, it refuses to boot to it or install technically!!
PLEASE HELP! does anyone know what im doing wrong or if there is a way to fix this?
(if this is the wrong forum for this please inform me immediately.)
hahmoode said:
Does anyone else have the issue where the Clockwork mod wont install. I have tried using rom manager, and did the terminal and pushing the blob file through but it just refuses to install. All the transformer does is give me a logo. The next step i tried is using the Goo manager to install the recovery but same thing, it refuses to boot to it or install technically!!
PLEASE HELP! does anyone know what im doing wrong or if there is a way to fix this?
(if this is the wrong forum for this please inform me immediately.)
Click to expand...
Click to collapse
On an unlocked device I don't think there can be aproblem to install a recovery.
All methods (terminal one or apps like Rom Manager and Goo) are in fact the same, copying the img or blob file in the flash partition, and the real flash occurs at next boot.
hahmoode said:
Does anyone else have the issue where the Clockwork mod wont install. I have tried using rom manager, and did the terminal and pushing the blob file through but it just refuses to install. All the transformer does is give me a logo. The next step i tried is using the Goo manager to install the recovery but same thing, it refuses to boot to it or install technically!!
PLEASE HELP! does anyone know what im doing wrong or if there is a way to fix this?
(if this is the wrong forum for this please inform me immediately.)
Click to expand...
Click to collapse
yes should be in Q & A
1. YOU ARE NOT RUNNING ASUS SOFTWARE ANYMORE. THAT IS WHY ASUS PROVIDED A WARNING WHEN YOU UNLOCK. YOU SHOULD EXPECT ISSUES WITH ROMS, IT IS BOUND TO HAPPEN.
2. The full wipe of the internal SD is for a fresh start. Its basically the same as re-installing windows, Kiss all your stuff goodbye unless you back it up beforehand. Don't cry to use that you lost your stuff because you decided to rush and not read the menu and select the correct choice.
3. Team Wookie are normal people with normal jobs and somewhat normal families that in turn this things take priority first, NOT YOUR PRIME. If issues arise we will work best with you as long as you are respectful and not a prick towards the team demanding stuff. We will address these issues on our clock, not yours.
4. Any future things you would like to see in future editions of this ROM please send me a PM and I will forward the information on to the rest of the team to discuss if it is possible. Keep in mind that we will not include paid apps in this rom because we will not rob out of other developers pockets for their hard work and also dropping the soap in prison leads to bad things that we want to avoid. JUST BECAUSE A REQUEST IS MADE IT DOES NOT GUARENTEE THAT IT WILL BE HONORED OR IN THE NEXT VERSION WHENEVER IT COMES OUT.
5. Team Wookie greatly appreciates all it's followers and feedback so don't ever think that your not appreciated, at least when it comes to a rom on a tablet level, the rest of your real world life is on you.
6. RESEARCH RESEARCH RESEARCH. We know there are a lot of posts now, 178ish pages and growing, please search through these pages to see if a solution has been found to your problem first before posting.
7. This is not the forum to ask how do I root my tablet or flash a rom. There are plenty of other threads on XDA and videos on youtube that explain how to do it with the current version software that you have.
This has been a public service announcement from Team Wookie, Long live the rebellion.
---------- Post added at 09:14 AM ---------- Previous post was at 09:06 AM ----------
Download goo manager from the play store and in the upper right hand corner select recovery. It will ask for superuser permissions then let it do its thing. However it will not show a progress bar or anything but rather just go back to the main menu. Just wait a few minutes and you will ge a pop up saying it is now installed.
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
This is not an issue because the rom is designed to work this way and I have flashed it this way many times. I have a video coming up shortly showing the whole install from twrp to desktop, im just editing it now. If anyone is feeling scared about doing this before you flash get the adb software package and try to push a test file to your tablet ( i just made a test.txt file) and see if it actually works. If the poop hits the fan then you know you can always push the zip file back because you confirmed ADB working with your computer and tablet.
For those having ADB issues follow this guide I made up. the best thing to do is to try to push a test file before you flash is you are going to super wipe and if you are really that nervous about it. This is based off of windows 7 64 bit but should be the same for windows 7 32 bit. I can confirm this works. Regardless ADB is good to have if you run any Android devices, not just this ROM so in case poop ever hits the fan here ya go:
This solved it for Winblows 7 64 bit. For others having the same problem on Winblows 7 64 bit (should be the same for 32 bit miuns the X86 Directory)
1. Go into settings on the prime and make sure USB debugging has a check in it in under SYSTEM > Developer options > USB Debugging
2. Plug your prime into your Winblows 7 laptop and let it install its drivers. Open up device manager by going to Start > Control Panel > Hardware and Sound > and click on device manager under devices and printers. If you see at the top of device manager ASUS Android devices and when you expand it you see ASUS Android Composite ADB Interface you already have the ADB drivers installed and can skip down to #6
3. Go to ASUS website and download the USB drivers for the TF201. Download Vipermod Primetime 4.6 here for the ADB drivers http://goo.im/devs/viperboy/Prime/vi...eTime_v4.6.zip then extract the zip file to a normal file. You only need the drivers from the tool.
4. Plug your prime into your Winblows 7 laptop and let it install its drivers. Open up device manager by going to Start > Control Panel > Hardware and Sound > and click on device manager under devices and printers.
5. You should see the prime listed under portable devices. Uninstall the driver then update the driver manually. Browse to the folder you created from the Vipermod primetime zip. Make sure there is a check in check sub folders. Winblows should detect the drivers and then convert the prime to a ASUS Android Device.
6. Go into settings on the prime and make sure there is no check in Launch ASUS Sync under PERSONAL > Accounts & Sync > Launch ASUS Sync
7. Press Control, Shift, Escape at the same time and make sure there are no instances of ASUS Sync or Splashtop runnung in services in Winblows 7.
8. Download and Install the latest Android SDK. I installed all the libraries and such just to be on the safe side. http://developer.android.com/sdk/index.html
9. DISCONNECT YOUR PRIME FROM THE USB AND REBOOT YOUR PRIME AND YOUR WINBLOWS LAPTOP. After both devices reboot plug in your tablet into your Winblows laptop.
10. Navigate to C:\Program Files (x86)\Android\android-sdk\platform-tools and click on the ADB file. A command prompt will open and spool up a bunch of stuff then close. All the stuff spooling I am assuming was the ADB server starting.
11. Hold down shift then right click inside platform-tools folder and select open command prompt here. You should be in a command prompt window showing the directory C:\Program Files (x86)\Android\android-sdk\platform-tools
12. type adb devices. You should see your primes serial number pop up.
13. make a test file in the platform-tools directory, i just used a simple text file to test then type:
adb push test.txt /sdcard/
It would be easier to just put the Rom you are going to flash in this directory so when it is time to push the rom it would be:
adb push nameofrom.zip /sdcard/
If SDCARD not recognized try:
adb push nameofrom.zip /system/media/
14. browse to your sdcard and you should see your file there. If you are already in the sdcard folder window on your prime, leave the folder then come back and it should be there.
15. You should be able to push files now after superwiping. You may need to push to /system/media/ if /sdcard/ is not found. Make sure you have all the / in the directory structure when pushing.
16. From inside recovery select install zip from sdcard and browse to the folder you pushed it to then flash awa
Sent from my Transformer Prime TF201 using xda app-developers app
So with those steps it still hasn't installed recovery! So the thing is that i have full root, and my prime is unlocked, but it just WONT install recovery using any app or manually! Is there a idea on why my prime wont let me?
(Thanks for that long answer btw i tried a lot of it but stil no dice )
Have you tried twrp? The link is HERE. I found its more reliable on the prime. Just my opinion.
fredgar75 said:
Have you tried twrp? The link is HERE. I found its more reliable on the prime. Just my opinion.
Click to expand...
Click to collapse
I will deff try it when i get home from work thank you i will let you know later! (THANKS SO MUCH FOR SOME MORE ADVICE ON THIS)
Ok just to be sure. You did unlock through asus? And you are rooted I know you said you have but just want to make sure. The only reason you wouldnt be able to flash a recovery is if your not unlocked. Just trying to rule out the obvious.
Simple steps:
1-Unlock prime
2-Download the ROM of your choice.
3-Download Goo Manager from the Play Store. Open it and hit menu - Install OpenRecoveryScript. The app will ask for su perms and may exit back to the main screen. Hit the install button again and the app will download the recovery, flash it and reboot. You'll see the flashing process and your tablet will reboot again. At this point you can hold vol down, then up to enter recovery.
4-Flash ROM
5-Profit!!
Doesn't get any easier, takes about 10 minutes for everything.
I used the multi root tool, viper mods tool I think it was, from a long time ago that was designed for rooting the .15 firmware, even though I was on .21 or .28 and I didn't use it to root, I only used the option to install recovery, which installs the latest TWRP recovery when I had a similar issue.
It worked great, I just ran the program on the computer and told it to install recovery.
Sent from my ADR6425LVW using xda premium
OK so the goal is to get a CM10 nightly build on my Asus transformer prime
What i have done so far is unlock the device via downloading the Asus utility to my prime, that seems to have worked fine.
Here is where i think everything went wrong,
I installed sparkyroot on my prime, it seems to have worked fine but when installing superuser app i see "su file does not exist or have correct permissions" but i went and installed the app anyway.
Now im stuck at rom manager app on my asus, when i open the app i get "you must root your phone for rom manger to function" superuser was not found at /system/bin/su...." .
I obviously didn't root properly.
when i try and press flash clockworkmod touch i simply get "an error occurred while trying to run privileged commands"
I messed up can someone please give me clear and noob friendly instructions on how to get to my end goal of CM10 from where i am PLLZZZZZ
shaneZ95 said:
OK so the goal is to get a CM10 nightly build on my Asus transformer prime
What i have done so far is unlock the device via downloading the Asus utility to my prime, that seems to have worked fine.
Here is where i think everything went wrong,
I installed sparkyroot on my prime, it seems to have worked fine but when installing superuser app i see "su file does not exist or have correct permissions" but i went and installed the app anyway.
Now im stuck at rom manager app on my asus, when i open the app i get "you must root your phone for rom manger to function" superuser was not found at /system/bin/su...." .
I obviously didn't root properly.
when i try and press flash clockworkmod touch i simply get "an error occurred while trying to run privileged commands"
I messed up can someone please give me clear and noob friendly instructions on how to get to my end goal of CM10 from where i am PLLZZZZZ
Click to expand...
Click to collapse
I suggest you go here first http://forum.xda-developers.com/showthread.php?t=1426502 download and install naked drivers
Then go here http://forum.xda-developers.com/showthread.php?t=1774352 download and unzip nvflash
Then go here http://forum.xda-developers.com/showthread.php?t=1615990 download twrp and place it inside the nvflashpack directory where you see adb.exe
Then go here http://forum.xda-developers.com/showthread.php?t=1782413 download EOS 3
or
Go here http://rootzwiki.com/topic/32357-rombaked-tf201-blackbean-2-8-15/ and download bakedbean 2
Put either one in the nvflashpack directory where adb.exe is or if you have an external sdcard, load a rom onto it (preferred method)
I am not a fan of cm10 though it has some nice features I wouldn't start with it...
Now the hard part....
Go here and follow the instructions http://androidroot.mobi/t3_nvflash/
As per the instructions put your prime in fastboot mode...
to you start a command prompt, open the nvflashpack directory where adb.exe is. Press and hold shift while rightclicking in the window, select open command prompt here
When the instructions say to enter a command, highlight it on the webpage and copy then in your command window right click and paste (control V does not work here)
Work your way all the way to the end until you see coming soon...
In the end you will have the modofied bootloader required for the lastest version of twrp (cwm doesn't work as well as twrp on the prime)
Now follow the instructions to install twrp this can be done through fastboot or through goo manager (download from market if you want to go the goo manager route)
Once that is complete with the prime still plugged into the pc, boot into twrp, now depending on if you have put the rom on an external sd card or not... if on sdcard, have it inserted before going into twrp, and install the rom from the card otherwise you can adb push the rom to the prime it will be adb push /name of rom.zip/ sdcard Note that the rom has to be in the same directory as adb.exe for this to work otherwise you need to type the path....for the name of the rom I suggest right clicking the file, go to properties and copy the name, then right click and paste in the command window... this eliminates mistakes.. and don't forget the.zip part.. the push will take about 5 minutes...
Then install the rom from twrp.....
No need to root as all custom roms are rooted... if your not comfortable with this, do lots more reading.....if something goes wrong you know the drill... I am not responsible.. blah blah blah...
Good luck!!!!!
Hi to All,
Well I got an ASUS TF201 March 2012 and I never messed with it much, just net surfing and watching movies and listening to music....
I wanted to get rid of some apps that I dont use at all e.g Amazon Kindle but found out with research that I can do that. Also tried to use apps like Titanium Backup again I couldnt. I am new to the Tablet world this is my first. So I did some research and terms of root, unlock etc came up. So I know the difference between them. In order not to lose my warranty and since I just want to be able to delete certain unwanted apps and add other apps, I just want to for now root my TF201.
Did more research but I still cant get an answer or get some of the methods to work for me.
Below is the specs for my Asus TF201
1. So I have JB (Android Version 4.1.1), dont know if it came with it or got updated like I said I didnt mess with the tablet alot
2. Build #: JRO03C.US_epad-10.4.2.17-20121018
I plugged in the USB to my Windows XP laptop for the first time today and ofcourse I am missing the drivers. I went to ASUS website and couldnt figure what I need.
1. Does anyone have the ASUS Sync that I need on my laptop
2. Also does anyone have the drivers that I need on my laptop so my ASUS is recognized. I installed some drivers from the xda forum to use the DebugFS Root but got a message that I need to install the latest drivers. Does anyone have them or can tell share a link for me to get them.
All I want basically is to have the current drivers on my laptop and the ASUS Sync thing and be able to ROOT my tablet. Most of the threads I read are for the Android Version ICS 4.0.
Any help on this is greatly appreciated
Thanks
RB
ramez75 said:
Hi to All,
Well I got an ASUS TF201 March 2012 and I never messed with it much, just net surfing and watching movies and listening to music....
*SNIP*
1. Does anyone have the ASUS Sync that I need on my laptop
2. Also does anyone have the drivers that I need on my laptop so my ASUS is recognized. I installed some drivers from the xda forum to use the DebugFS Root but got a message that I need to install the latest drivers. Does anyone have them or can tell share a link for me to get them.
All I want basically is to have the current drivers on my laptop and the ASUS Sync thing and be able to ROOT my tablet. Most of the threads I read are for the Android Version ICS 4.0.
Any help on this is greatly appreciated
Thanks
RB
Click to expand...
Click to collapse
Asus Suite including Sync:
http://support.asus.com/Download.as...ite_v1_0_41.zip#ASUS_Pad_PC_Suite_v1_0_41.zip
I just went through the unlock part yesterday so fresh in the mind it ASSUMES AN SD CARD IS INSTALLED and WINDOWS OS!
Asus Unlock Tool:
http://support.asus.com/Download.as...ck_Device_App_V6.apk#UnLock_Device_App_V6.apk
Get TWRP for TF201Jellybean:
TWRP Page
On that page are instructions including a download link for JB BOOTLOADER ONLY! MAKE SURE YOU GET THE RIGHT TWRP FILE FOR YOUR DEVICE. THE ICS ONE IF YOU ARE ON ICS, OR THE JB ONE IF YOU ARE ON JB:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
Download bin4ry's root tool to get the ADB file
When that is downloaded you can compare the MD5 hash because its a good idea to do that. You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it saysthe files MD5 hash is on the download web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Then I downloaded Ultimate Backup Tool from here:
http://goo.gl/iOUwe
Unzip it so you have fastboot.exe
Rename the TWRP you downloaded to TWRP.blob and copy it to where you have fastboot unzipped.
Finally download SuperSU zip file from:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Now we need to unlock the device. Copy the unlocker APK to the SD card. Run a file explorer on our tables and browse to the SD card (/Removable/MicroSD). Tap the APK to install. Once installed run the Icon for the unlocker and follow directions. There are several warnings etc.. You will need wifi connected and it will unlock your device and VOID YOUR WARRANTY!.
The unlock will take a few minutes. When it is successfull you will see a notice on device boot up that says the device is unlocked.
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
if you don't get the command window here option then you will have to open a command prompt. open the run dialog and type CMD and hit enter. This will get a dos command windows. Use the change directory (CD) command to change the current folder in the DOS window to where your fastboot file and TWRP.blob are.
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
Let it runs its course. When done I had a black screen with ASUS in the middle and a blue-ish bar across the bottom that was filled. I had to hold power until it rebooted.
Once I confirmed my Stock OS loaded I copied the Super SU zip file we downloaded above over to the device via the USB cable to the root of my SD card. Once the copy complets shutdown the device again.
Once off, power it on and press and hold both the power buttons and volume down again. When the menu appears you should already have RCK (recovery) hightlighted so press volume up to load TWRP recovery.
Once TWRP loads the top left option is "Install" tap that.
You will see a few choices, select the radio button to install from SD card (external source it may say). Tap the super su zip file: Superuser-3.1.3-arm-signed.zip to choose it.
Slide the slider at the bottom to the right.
This will flash superSU to your device. When done, reboot (should only take a few seconds).
When you boot up SuperSU is installed.
To test root with ADB:
Your tab must be plugged in to the USB port of the computer of course.
If you installed the SDK tools it is there or use the one from bin4ry's root tool as follows:
Unzip the downloaded root tool from bin4ry mentioned above. Use the command windows to change directory of the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the command sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Edits:
I have editted this based on questions below to make it more complete..
First Thank yo uso much for taking the time and sharing the good info. Ofcourse there is alot of foreign terminology you have used and I will need to read you reply a number of time till it soaks in and I am sure I will have follow-up questions.
So it seems the only way I can get to root my TF201 (running JB) is to unlock it which means losing the warranty. Well if thats the only route then so be it....
I guess first thing is to successfully unlock the TF201
hx4700 Killer said:
Asus Suite including Sync:
http://support.asus.com/Download.as...ite_v1_0_41.zip#ASUS_Pad_PC_Suite_v1_0_41.zip
I just went through the unlock part yesterday so fresh in the mind it ASSUMES AN SD CARD IS INSTALLED and WINDOWS OS!
Asus Unlock Tool:
http://support.asus.com/Download.as...ck_Device_App_V6.apk#UnLock_Device_App_V6.apk
Get TWRP for TF201Jellybean:
http://teamw.in/project/twrp2/93
On that page are instructions including a download link for JB BOOTLOADER ONLY!:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
When that is downloaded you can compare the MD( its a good idea to do that). You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it says on the web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Then I downloaded Ultimate Backup Tool from here:
http://goo.gl/iOUwe
Unzip it so you have fastboot.exe
Rename the TWRP you downloaded to TWRP.blob and copy it to where you have fastboot unzipped.
Finally download SuperSU zip file from:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Now we need to unlock the device. Run the unlocker tool you downloaded. For here its fuzzy for me because I found the APK file I got from the Asus download and copied it over to my tablets SD card via USB. Then I used the built in file browser to find it on my SD card and ran it. By whatever means you will need to run the unlocker tool on your tablet to unlock. You will need wifi connected and it will unlock your device and VOID YOUR WARRANTY!.
The unlock will take a few minutes. When it is successfull you will see a notice on device boot up that says the device is unlocked.
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
Let it runs its course. When done I had a black screen with ASUS in the middle and a blue-ish bar across the bottom that was filled. I had to hold power until it rebooted.
Once I confirmed my Stock OS loaded I copied the Super SU zip file we downloaded above over to the device via the USB cable to the root of my SD card. Once the copy complets shutdown the device again.
Once off, power it on and press and hold both the power buttons and volume down again. When the menu appears you should already have RCK (recovery) hightlighted so press volume up to load TWRP recovery.
Once TWRP loads the top left option is "Install" tap that.
You will see a few choices, select the radio button to install from SD card (external source it may say). Tap the super su zip file: Superuser-3.1.3-arm-signed.zip to choose it.
Slide the slider at the bottom to the right.
This will flash superSU to your device. When done, reboot (should only take a few seconds).
When you boot up SuperSU is installed. ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Click to expand...
Click to collapse
Yes, unlock it. There is no root method for tf201 on JB outside of unlock. An exploit may come up some day but nothing soon I would wager.
I tried to organize it by Al the stuff you need to download first. Then steps to use what you downloaded. It you follow it precisely things would become clearer.
Hi,
Ok I was going through the instructions and downloading all the necessary files and I ran into an issue with downloading the TWRP for JB. Well the link you have allows me to download either the *.img or the *.blob extensions. So I went ahead and downloaded the *.blob extension. I did the MD5 as you recommended and visually checked it with the image on the website and they dont match. I got the below
"b6bae17dac81a126d5d3ad8e27fd5007" which is entirely different than the one on the webpage. I also tried the *.img and no luck there. So I stopped. What do I do now where can I get the TWRP
Thanks
hx4700 Killer said:
Get TWRP for TF201Jellybean:
http://teamw.in/project/twrp2/93
On that page are instructions including a download link for JB BOOTLOADER ONLY!:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
When that is downloaded you can compare the MD( its a good idea to do that). You can find something like winMD 5 generator:
http://www.winmd5.com/download/winmd5free.zip
Use it to generate an MD5 hash of the TWRP download to what it says on the web page. If I remember correctly I had to manually type in the MD5 hash from the page because it was an image I couldnt just copy. Or you can just visually verify with the one generated by winmd5.
Click to expand...
Click to collapse
hx4700killer
I did some googling and found the below link
http://forum.xda-developers.com/showthread.php?t=1510737
the link has "Direct apk link (dropbox)"....Is this what you referred too? I downloaded the file, should I move it to the SD card and run it from within the tablet?. Is there a way to run an apk file.
Also
I downloaded Android SDK on my laptop. I run the eclipse.exe as per the instructions on the website but nothing happens
Thank you
RB
Download the APK from the link I gave above. It comes straight from ASUS. I had gotten it 2 months ago and I guess I thougth I had run an installer and copied the APK from there but it is in fact just an APK to download directly.
When you copy it to the SD card nothing is needed to run it. Just tap on the file in a file explorer on the tablet and it will install itself. once installed run the installed unlock app and follow the directions.
The link from ASUS has a zip file. So i did download it and extract it to the SD card. Moved the SD card to the tablet but there is no apk file.....Also do i use the twrp file even if the md5 didnt match.
Thanks
Sent from my Transformer Prime TF201 using xda app-developers app
ramez75 said:
The link from ASUS has a zip file. So i did download it and extract it to the SD card. Moved the SD card to the tablet but there is no apk file.....Also do i use the twrp file even if the md5 didnt match.
Thanks
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
The second link that says it is for the unlock tool is the APK.
Ok the unlock worked successfully. So my TF201 is unlocked.
Following the rest of your post, next thing on the hit parade is to have the correct TWRP for JB (Open_recovery_TWRP.blob). At this point the MD5sum using WinMD doesnt match the image on the website. Do I still go ahead and use it or will it cause issue....
Ofcourse I dont understand what is the use of the MD5sum number
Thanks
hx4700 Killer said:
Download the APK from the link I gave above. It comes straight from ASUS. I had gotten it 2 months ago and I guess I thougth I had run an installer and copied the APK from there but it is in fact just an APK to download directly.
When you copy it to the SD card nothing is needed to run it. Just tap on the file in a file explorer on the tablet and it will install itself. once installed run the installed unlock app and follow the directions.
Click to expand...
Click to collapse
ramez75 said:
Ok the unlock worked successfully. So my TF201 is unlocked.
Following the rest of your post, next thing on the hit parade is to have the correct TWRP for JB (Open_recovery_TWRP.blob). At this point the MD5sum using WinMD doesnt match the image on the website. Do I still go ahead and use it or will it cause issue....
Ofcourse I dont understand what is the use of the MD5sum number
Thanks
Click to expand...
Click to collapse
The MD5 is confirmation that what you downloaded matches what was uploaded to the server. It runs an algorithm against the file contents and generates that long number. When you compare the number to what is on the server page they should match.
If they don't match then HELL NO do not flash it or you will have a bricked device. Redownload it and don't flash anything unless the MD5 matches.
I totally missed that you posted this above or I would have told you sooner.
Thanks, well then i cant use that link i cant get the MD5 to match. I will google and see if I can find a twrp file that will work for me
hx4700 Killer said:
The MD5 is confirmation that what you downloaded matches what was uploaded to the server. It runs an algorithm against the file contents and generates that long number. When you compare the number to what is on the server page they should match.
If they don't match then HELL NO do not flash it or you will have a bricked device. Redownload it and don't flash anything unless the MD5 matches.
I totally missed that you posted this above or I would have told you sooner.
Click to expand...
Click to collapse
ramez75 said:
Thanks, well then i cant use that link i cant get the MD5 to match. I will google and see if I can find a twrp file that will work for me
Click to expand...
Click to collapse
This is the MD5 hash that you should get:
19d93f4ec4685b8124468684eb2913fc
This is the exact download link I used for my TF201 running the most recent JB Update:
http://techerrata.com/file/twrp2/tf201/openrecovery-twrp-2.3.1.0-tf201-jb.blob
The file you get is: openrecovery-twrp-2.3.1.0-tf201-JB.blob which is the one I say to rename to twrp.blob
I would NOT flash anything not from the source on this one. If its wrong your device is trash.
Hi again,
Ok so i got the correct TWRP.blob and I changed its name and put it in the folder with fastboot.exe. i plugged in my tf201 to my laptop followed the power volume sequence. I held the shift and right clicked on the folder but i didnt see "Open command window here". So how do i got about that. Do i use the "cmd" in the run from start to open the black dos screen and change directory (cd..) till i get to the folder that has the fastboot.exe
Thanks
hx4700 Killer said:
Once unlocked, power it off. Once off power it onby holding BOTH volume down and power buttons. When you see the menu appear the first option is RCK. press Volume Down to change the cursor to be over the USB logo (two presses of the button) and press volume up. This puts your device in fastboot mode
Back on your computer you should hopefully see a successfull driver install. I got drivers from downloading and installing the Android SDK so you may or may not need to do that. Android SDK
If all is prepared and you are in fastboot with drivers loaded:
On your computer hold shift and right click on the folder where fastboot and the twrp.blob file are and you will see a context menu. Click on "Open Command Window Here"
In the command window paste:
fastboot -i 0x0b05 flash recovery twrp.blob
and hit enter
...
Click to expand...
Click to collapse
Yes, just open CMD and "cd" your way to the directory. Just make sure you end up inside the directory (ie. "...\UBTv1.3.2>")
ramez75 said:
Hi again,
Ok so i got the correct TWRP.blob and I changed its name and put it in the folder with fastboot.exe. i plugged in my tf201 to my laptop followed the power volume sequence. I held the shift and right clicked on the folder but i didnt see "Open command window here". So how do i got about that. Do i use the "cmd" in the run from start to open the black dos screen and change directory (cd..) till i get to the folder that has the fastboot.exe
Thanks
Click to expand...
Click to collapse
Followed all the instructions and seemed all were successfull. I see a Superuse icon created. What do you mean by ADB? and what will yield root when I type?, where do I type?. I dont understand the last sentence, please can you empahsize on it
Thanks again
hx4700 Killer said:
ADB will now yield Root when you type: SU root and hit enter (grant root privs in the popup)etc...
Click to expand...
Click to collapse
ramez75 said:
Followed all the instructions and seemed all were successfull. I see a Superuse icon created. What do you mean by ADB? and what will yield root when I type?, where do I type?. I dont understand the last sentence, please can you empahsize on it
Thanks again
Click to expand...
Click to collapse
Lol, guess I didnt include one of those in the downloads. After flashing TWRP I assume you "Installed" the superuser zip? This is what roots the device.
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
http://ul.to/xdevcthz
Your tab must be plugged in to the USB port of the computer of course.
Download the ZIP file and decompress. Use CMD to change directory to the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
Adding:
i just remembered that you said you downloaded the android SDK. ADB is in amongst those files as well.
By the i still didnt follow the below instructions but it seems i am already rooted because i was able to download titanium backup. So what will the below steps give me more.
Also how do i get rid of apps like Amazon kindle??.....
Below you say that you used the method from binary but you also say it doesnt wok with the prime. So i presume tf201 is the prime, so i still follow the below right
hx4700 Killer said:
Lol, guess I didnt include one of those in the downloads. After flashing TWRP I assume you "Installed" the superuser zip? This is what roots the device.
I got ADB from several sources but this "root method" http://forum.xda-developers.com/showthread.php?t=1886460 from bin4ry is what I have been using: (And no, it doesnt work for the prime because the exploit he uses to run the device in emulator mode doesnt work for us)
http://ul.to/xdevcthz
Your tab must be plugged in to the USB port of the computer of course.
Download the ZIP file and decompress. Use CMD to change directory to the unzipped folder and further in to the "STUFF" folder. type:
adb shell
<hit enter>
after a few seconds you should see a $ prompt and your are in to the console of your tablet.
Type:
su root
<hit enter>
Superuser will prompt you to grant root permissions and I set the setting so it doesnt prompt me every time.
Your prompt will change to # and thats it, you are root.
I don't seem to have the sudo on my tab so every time in a terminal I want root I will type that su root to get the # prompt.
Any apps that need root can now ask for it, you will get that same "Grant" prompt and do so if that is what you want.
Adding:
i just remembered that you said you downloaded the android SDK. ADB is in amongst those files as well.
Click to expand...
Click to collapse
ramez75 said:
By the i still didnt follow the below instructions but it seems i am already rooted because i was able to download titanium backup. So what will the below steps give me more.
Also how do i get rid of apps like Amazon kindle??.....
Below you say that you used the method from binary but you also say it doesnt wok with the prime. So i presume tf201 is the prime, so i still follow the below right
Click to expand...
Click to collapse
What I meant was I use ADB from that root method from bin4ry. He includes ADB.EXE and needed DLL files so its a quick one stop shop for ADB.
Does the adb shell command give you anything? No its just proves root is available. Rootcheckers can also do it. ADB is just a way in to your device from a desktop machine.
I have never removed an APP but I believe removing its APK file from /system/app folder allows it to be removed or does remove it. ( i would save it somewhere in case you need/want it back)
Thank you for an easy to follow way to root a 4.1.1 JB OTA TF-201. It worked exactly as you described.
You may want to let some of the noob users know what in each zip file they need. It really helps if all the files you download are in one location unless you are familiar the windows command line.