IT IS BOOT LOOPING
BUT WHEN BOOTING IT SAYS "STICK TOGETHER" AND UNDERNEATH IT SAYS NOT "TEST ONLY NOT FOR SALE" I GUESS I FLASHED THE WRONG ROM OR SOMETHING
AND IT'S LIKE THE BATTERY DOESN'T WORK OR SOMETHING, IT MUST BE PLUGGED TO TURN ON
I TRIED BOOTLOADER AND PC DOESN'T RECOGNIZE IT
so in the end can someone guide me on how to flash it back to stock rom?
I already downloaded the stock rom, I just need some more instructions
Thank you so much in advance, this is really stressing me out and I am about to give this as a gift too
Again, thank you and please give some advice
A new hacker said:
IT IS BOOT LOOPING
BUT WHEN BOOTING IT SAYS "STICK TOGETHER" AND UNDERNEATH IT SAYS NOT "TEST ONLY NOT FOR SALE" I GUESS I FLASHED THE WRONG ROM OR SOMETHING
AND IT'S LIKE THE BATTERY DOESN'T WORK OR SOMETHING, IT MUST BE PLUGGED TO TURN ON
I TRIED BOOTLOADER AND PC DOESN'T RECOGNIZE IT
so in the end can someone guide me on how to flash it back to stock rom?
I already downloaded the stock rom, I just need some more instructions
Thank you so much in advance, this is really stressing me out and I am about to give this as a gift too
Again, thank you and please give some advice
Click to expand...
Click to collapse
take out your SD card and put it in a card reader on your PC,
take the stock ROM and make sure you name it LEOIMG.NBH
move LEOIMG.NBH to the root of your SD card (not in any folder)
put your SD card in the phone, hold the vol-down button and press power (same time), it should ask you about flashing the ROM, hit power to flash the stock ROM.
orangekid said:
take out your SD card and put it in a card reader on your PC,
take the stock ROM and make sure you name it LEOIMG.NBH
move LEOIMG.NBH to the root of your SD card (not in any folder)
put your SD card in the phone, hold the vol-down button and press power (same time), it should ask you about flashing the ROM, hit power to flash the stock ROM.
Click to expand...
Click to collapse
It didn't work, I've moved it to the root of the memory card, vol down and power. It says Loading... then on top it says "00058002" I shall research more on this. Thank you for being the only one who replied, bless your soul
You flashed a MFG SPL test ROM...from which there is no escape. Basically you are SOL unless you send your device back to HTC for a warranty repair.
http://forum.xda-developers.com/showthread.php?t=668347
and
http://forum.xda-developers.com/showthread.php?t=655653
These might help. There's alot of reading to do.
Do you have a T-Mobile USA HD2?
If so, and these links don't help, try looking further in the TMOUS HD2 Fora
If you can't get out of SPL 2.02, the ROM in my sig is not watermarked, and works quite well. If you can't escape 2.02, this ROM is your only option
How much is it to get replaced/repaired by HTC? Not T-Mobile because it's out of contract the day I bought it. (Unless they have a cheaper plan of course *wink)
Thanks hugggs, I've tried that before, but now it's still dead. Thanks though. I guess you can help me by scouting your local craigslist for an EVO or HD2, buy it, I'll paypal you and you can send me the phone. lol in my dreams
bout a hundred and forty dollars for a new mainboard. (which is what they will say they had to replace).
read THIS thread for a solution. theres a version of hspl that supports spl 2.02 on page 7
It's not 2.02 it's 2.00.1000
I guess I would send it back to repair, I flashed a test rom so it should be official right? The radio I don't think it's been tinkered with (or all radios are official)
Related
After trying to rebuild a ROM (NAFT's v3.0) by adding rilphone.dll file to it. Everything went well when I did it with NAFT's v2.3, but when I tried it on v3.0, my phone just stop at the AT&T World Phone screen... I did a hard reset by Pressing Volume Down + Enter + soft reset, but it still stuck at the AT&T screen.
I can still go into the boot screen, but I dont' know what I can do now.
Please help.
IS there a way to load a new ROM from the Bootscreen?
Load the ROM NBH file to your SD Card under the name RAPHIMG.NBH
Enter the Boot Screen and it should start Flashing the ROM.
Enter bootloader, plug the usb cord in, wait for usb to show up on the tri color screen, flash different rom.
Alternatively, you could enter bootloader and follow the directions for flashing from SD card.
Search for it.
Next reply will probably be by someone telling you to search for these questions first, and then someone will make a comment about your somewhat simple question for someone with your post count, and then a mod will say 'redundant thread closed'.
Good luck.
Copy a ROM to your root of your SD card /Storage Card. Rename the ROM file RAPHIMG.nbh
Then go to the bootloader. Should ask you to flash the ROM. Press the power button to begin flashing.
You could also try flashing the Stock ROM that came with you device via your pc with your device in the bootloader. Hook your device up to your pc in the bootloader it will say Serial or USB. If it's USB you should be able to flash as normal.
just like fox, ATW and navy said..
whenever u run into an issue like that..flash from ur SD
80% of the time it works.
ive been in ur situation before..its pretty ****ty..but u can bounce back real quick
Late,
Jstar
I follow the first advice... put it in boot screen and reflash the new ROM... hope this will work, crossing my fingers... Thanks guys for the very quick reply... it's flashing as we speak.
It seems to be working now... thanks guys.
Got so scared... I must give up the Call Display project... sounds too dangerous
same reason why i stopped messsing with the dialers on M2D
one to many things went wrong and i gave that up real quick..
but what ive learned..over time..
theres always a FIX..just gotta look for it.
Late,
Jstar
JstarLuvsTina said:
same reason why i stopped messsing with the dialers on M2D
one to many things went wrong and i gave that up real quick..
but what ive learned..over time..
theres always a FIX..just gotta look for it.
Late,
Jstar
Click to expand...
Click to collapse
It wasn't easy to search went you find out that you've just lost $500 because of a stupid step you did
However, I tried to manage myself to search through the forum for the words "Brick" "Unbrick" and "Flash ROM through Storage Card"... and I thought the world was ending, so I go for the last hope by posting a help thread
Thank and I love you all
Hey guys, I havnt had a issue with my phone untill now, i installed energy rom a few days ago and i havnt had a issue however my ever my phone froze on me earlier so i poped out the battery and put it back in now it wont go past the splash screen, so ive tried to reinstall the at&t original rom and all and now i get the at&t splash but i get no where it just keeps reseting
Please Help!
sleepyzx said:
Hey guys, I havnt had a issue with my phone untill now, i installed energy rom a few days ago and i havnt had a issue however my ever my phone froze on me earlier so i poped out the battery and put it back in now it wont go past the splash screen, so ive tried to reinstall the at&t original rom and all and now i get the at&t splash but i get no where it just keeps reseting
Please Help!
Click to expand...
Click to collapse
Press and Hold the volume down key then push the reset button. When you see the tricolored screen, you can re-flash to a new ROM from there... just by launching a new flash.
thanks for responding yea i tried that i even reinstalled the energy rom but it still wont go past the splash
try flashing from you sd card, search flashing from sd card or something like that. I belive you have to format it in 32 mode and then take the rom "raphimg.nbh"(not exact spelling or proper spelling I beleive some of that has to be in capitals) sorry to here your phone is down. Try that and post your results.
Format the card FAT32. Place a rom on the card & rename the rom to RAPHIMG.nbh.
Put the SD Card in the slot & hold volume down & reset. Press the power button when instructed to do so on the screen.
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
sleepyzx said:
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
Click to expand...
Click to collapse
Try a different microSD. Also be sure that you did a full format not a quick format. I had an issue with a few microSD cards, but I like my 2GB PNY for flashing my phone via microSD.
I had the exact same issue after flashing the latest energy 3 rom
heres what i did
1. Reflashed Hard SPL
2. Flashed a stock HTC ROM, i managed to do this from my PC by manually entering the bootloader.
3. Did a hard reset
4. Let phone complete initial setup
5. Reflashed Hard SPL - Read somewhere that sock roms may overwrite \ partially overwrite Hard SPL
6. Flashed an Energy 2 ROM (only cause i wanted to check something out in it anyway)
So far its all looking good
sleepyzx said:
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
Click to expand...
Click to collapse
It happened for me with 2GB microSD. But magically after I did checkdisk/scandisk, the image found
shearsey said:
I had the exact same issue after flashing the latest energy 3 rom
heres what i did
1. Reflashed Hard SPL
2. Flashed a stock HTC ROM, i managed to do this from my PC by manually entering the bootloader.
3. Did a hard reset
4. Let phone complete initial setup
5. Reflashed Hard SPL - Read somewhere that sock roms may overwrite \ partially overwrite Hard SPL
6. Flashed an Energy 2 ROM (only cause i wanted to check something out in it anyway)
So far its all looking good
Click to expand...
Click to collapse
This look like some dangerous steps
Let me ask you guys, which version of Energy are you guys using?
monx® said:
It happened for me with 2GB microSD. But magically after I did checkdisk/scandisk, the image found
Click to expand...
Click to collapse
good to see you back, ive had similar issues with a my 16GB and 8GB aswell a few times i think its due to some corruption beeing made to the filesystem when we disconnect it to soon form the pc (using it as disc-drive) thats kinda the same thing that happens when u disconnect a usb-harddrive in windows while its in use by windows and tries to connect it with linux.
a really good disc-repair tool i stumbled upon is located here
http://www.cgsecurity.org/wiki/TestDisk
and just to make sure its done right as gsleon3 said, do as he said and make sure that you take the you take the ruu_signed.nbh and rename that to raphimg.nbh (not sure if it has to be in CAPS, im pretty sure ive done it like this RAPHimg.nbh lots of time)
...monx, it would be great to have you back cooking wonderful stew
cheers
@jonteponte
thanks for the tool. it is not case-sensitive but name-sensitive
i'm not going anywhere. always around
-freeheel is freedom, tried, i love it
monx® said:
@jonteponte
thanks for the tool. it is not case-sensitive but name-sensitive
i'm not going anywhere. always around
-freeheel is freedom, tried, i love it
Click to expand...
Click to collapse
@monx® you're welcome
if you ever come to the northern part of sweden just let me know and ill take you on trip, i have several pairs of skis and boots aswell =)
Hello there,
I installed Hspl a few days ago on my Virgin HD2 and have tried a few custom roms on it but i am sure this phone is faulty as it randomly crashes on all the roms i have tested.
My brother received this phone also and he has tried the custom roms and his is fine so i am planning on sending it back for an exchange.
I have read the instructions for uninstaling Hspl and watched the video so i downloaded the rom from the official HTC site and extracted the RUU_signed.nbh and renamed it to LEOIMG.nbh but when i hold the volume button down and press power on to load the LEOIMG.nbh off the memory card...it gets to the loading screen then shows me the screen with the SPL-1.42.HSPL on it.
I am a Noob so i am probably doing something wrong
Can anybody help me out please?
Thanks.
You need a GoldCard. You can not only put the "LEOIMG.nbh" on it. It will not work. Create a GoldCard, follow the instruduction and it will work fine.
http://forum.xda-developers.com/showthread.php?t=591239
Regards
crazy cat said:
You need a GoldCard. You can not only put the "LEOIMG.nbh" on it. It will not work. Create a GoldCard, follow the instruduction and it will work fine.
http://forum.xda-developers.com/showthread.php?t=591239
Regards
Click to expand...
Click to collapse
Your wrong... If he has HSPL, which he has, he can simply put the "leoimg.nbh" on the root on the memory card... Then, while turning it on, hold down the "volume down" button... That's what's HSPL is for...Remember to format the memory card in fat32... If you don't it won't work... The card that comes with the HD2 is formatted in fat16... Use fat32!
Edit:
Here is the "official" guide:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
But again... Remember to format your sd card in fat32.
Hello,
Thanks for the replies.
My card is formatted to Fat 32.....i switch the phone off then hold down on the volume then press power on...first the screen shows me the SPL-1.42.HSPL then "Loading" shows then it shows the SPL-1.42.HSPL again.
The words serial sometimes show at the bottom of the screen.
Do i need to hold or release the volume and power buttons for any length of time?
It looks like i was holding on to the volume down button too long.
Thanks for the help.
Hi, i am having a problem now.. I used the ruu from RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
as a LEOIMG.nbh to restore to SPL, the SPL done, back to 1.42, but now the problem is.. the screen jus freeze at the tricolour page and wont do anything else.. it wont boot to windows as well, if i remove my sdcard, only a grey triangle appears.. if i am using different ruu as leoimg.nbh, it will say not allowed.. jus now i was successfully installed HSPL, installed the RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
rom, and i was successfully remove all of those Telstra stuff.. then, i did wat i mentioned, trying to uninstall HSPL as a practice, and now i am stuck here.. i can't find any stock rom or original rom from anywhere.. PLEASE HELP!!!
0031nek said:
Hi, i am having a problem now.. I used the ruu from RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
as a LEOIMG.nbh to restore to SPL, the SPL done, back to 1.42, but now the problem is.. the screen jus freeze at the tricolour page and wont do anything else.. it wont boot to windows as well, if i remove my sdcard, only a grey triangle appears.. if i am using different ruu as leoimg.nbh, it will say not allowed.. jus now i was successfully installed HSPL, installed the RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
rom, and i was successfully remove all of those Telstra stuff.. then, i did wat i mentioned, trying to uninstall HSPL as a practice, and now i am stuck here.. i can't find any stock rom or original rom from anywhere.. PLEASE HELP!!!
Click to expand...
Click to collapse
Hi
Do a hard reset
Take 2gb card and format fat32 and download the rom from htc site using your serial number because You got the HD2 from Virgin uk means that it is factory unlocked and unbranded.
Extract the downloaded rom and rename the RUU signed nbh file to LEOIMG.nbh and put it into the root of the card
Now remove the battery put the card in the hd2
Press and HOLD the Vol down button until you see the bootloader
Then follow the screen
I hope this will work
Good luck
sabes143 said:
Hi
Do a hard reset
Take 2gb card and format fat32 and download the rom from htc site using your serial number because You got the HD2 from Virgin uk means that it is factory unlocked and unbranded.
Extract the downloaded rom and rename the RUU signed nbh file to LEOIMG.nbh and put it into the root of the card
Now remove the battery put the card in the hd2
Press and HOLD the Vol down button until you see the bootloader
Then follow the screen
I hope this will work
Good luck
Click to expand...
Click to collapse
Hi.
Also struggle with the fact that it freezes in the tri-color screen. Card is formated in fat32, file is renamed LEOIMG.nbh.
I get the text 'serial' in the white color part of the screen.
yeahbabyyeah said:
Hi.
Also struggle with the fact that it freezes in the tri-color screen. Card is formated in fat32, file is renamed LEOIMG.nbh.
I get the text 'serial' in the white color part of the screen.
Click to expand...
Click to collapse
Any ideas would be appreciated.
you can only install your authorised telestra ROM via HTC's stock RUU.exe without hspl. Perhaps do a [REQ] thread for the ROm to be posted by someone who can dump it.
chris_ah1 said:
you can only install your authorised telestra ROM via HTC's stock RUU.exe without hspl. Perhaps do a [REQ] thread for the ROm to be posted by someone who can dump it.
Click to expand...
Click to collapse
Say again please?
You need stock (only stock) SD 2GB Card that was with your phone.
After you found it, you need to download shipped rom from HTC official site for your region.
Then you have to open the .exe file with winrar and after it you have to unpack "RUU_Signed.nbh" to your SD card and rename it into "LEOIMG.nbh".
Then reload your phone with pressed "volume down".
And then you will follow instructions.
P.S. Sorry for my English, I am from Russia.
I have the same issue as mentioned above, i've used both the standard SD card that came with the phone and an alternative SD card that i know works and both have the Tricolour theme and serial at the bottom..
Any ideas driving me mad
wakers said:
I have the same issue as mentioned above, i've used both the standard SD card that came with the phone and an alternative SD card that i know works and both have the Tricolour theme and serial at the bottom..
Any ideas driving me mad
Click to expand...
Click to collapse
What exactly are you trying to do, what method are you using and where is it going wrong?
Mark.
Sorry just figured out i was leaving my finger on the volume down button to long..
Didn't realise i had to let go when the loading message comes on the screen..
Been struggling with this for a while but finally did it (thanks to wakers post above).... apart from all the normal instructions remember to let go of the volume down button as soon as the tri-colour screen appears!!
HackAJack said:
Been struggling with this for a while but finally did it (thanks to wakers post above).... apart from all the normal instructions remember to let go of the volume down button as soon as the tri-colour screen appears!!
Click to expand...
Click to collapse
Hi,
I have been having the same problem. I could really appreciate your help.
I need to remove HSPL from the phone as I have sold the phone & don't want to void warranty.
I Followed what Mskips thread said but still could not do it.
I have copied the NBH file from stock rom, renamed it LEOIMG.NBH & copied it to route of memory card that I formatted with FAT32.
Put the memory card in phone, held down the Volume Down button for three seconds & then held down the power button.
I would get the tricoloured screen with HardSPL info but nothing else would happen.
Some one on the forum said try formatting it FAT16 & see if that makes a difference. I tried this & I got slightly further, after the tricolour screens comes up I get a white screen that seize loading but nothing happen after that.
I tried letting go off the Volume button as soon as you see the tricoloured screen, but I am not getting any further i.e. flashing instructions.
Would really appreciate if you could help & tell me what roms etc you used so I can get this done.
This has been lingering for a few days now I have to post item on Tuesday
Please help
Thanks
JAW$
How long should it stay in loading mode??? i have a white screen with loading... at the top...it has been like this for 30min
in order to uninstall hspl to your phone....you need to know your original Stock rom....you should have backed up your original Stock rom before playing with your expensive phone....
JAW$ said:
Hi,
I have been having the same problem. I could really appreciate your help.
I need to remove HSPL from the phone as I have sold the phone & don't want to void warranty.
I Followed what Mskips thread said but still could not do it.
I have copied the NBH file from stock rom, renamed it LEOIMG.NBH & copied it to route of memory card that I formatted with FAT32.
Put the memory card in phone, held down the Volume Down button for three seconds & then held down the power button.
I would get the tricoloured screen with HardSPL info but nothing else would happen.
Some one on the forum said try formatting it FAT16 & see if that makes a difference. I tried this & I got slightly further, after the tricolour screens comes up I get a white screen that seize loading but nothing happen after that.
I tried letting go off the Volume button as soon as you see the tricoloured screen, but I am not getting any further i.e. flashing instructions.
Would really appreciate if you could help & tell me what roms etc you used so I can get this done.
This has been lingering for a few days now I have to post item on Tuesday
Please help
Thanks
JAW$
Click to expand...
Click to collapse
Try to check your sd card....it might be faulty....
Yesterday i put my hd2 in my pocket without locking the screen. when i heard it surfing around the menues i took it back up and tried to take it back to homescreen. As many times before the phone refused to respond so i took out the battery. But when powering it back on the **** wont pass the htc startup-screen!
I have read around this forum quite alot now and i have done hard reset a million times, i have installed an original updated rom from htc`s site. When this didn`t work i installed hspl3, Artemis v270 NOR and RADIO_2.07.51.22_2. And it still wont start!
Im getting quite sick of experimenting, so i`d be really happy if any of you smartguys could help me
Pelle-pirk said:
Yesterday i put my hd2 in my pocket without locking the screen. when i heard it surfing around the menues i took it back up and tried to take it back to homescreen. As many times before the phone refused to respond so i took out the battery. But when powering it back on the **** wont pass the htc startup-screen!
I have read around this forum quite alot now and i have done hard reset a million times, i have installed an original updated rom from htc`s site. When this didn`t work i installed hspl3, Artemis v270 NOR and RADIO_2.07.51.22_2. And it still wont start!
Im getting quite sick of experimenting, so i`d be really happy if any of you smartguys could help me
Click to expand...
Click to collapse
Flash a radio that does not have ".51" in the name. Flash a radio that has ".50" instead. ***Make sure the ".50" radio is 2.06+ (don't flash anything below 2.06.50.xx).
Okay, thanks for your reply But i still cant make it work, are you sure its the radio causing this problem? I`ve now tried RADIO_2.10.50.28_2 (this is the only one with "50" in it among the recomended radios in the artemis thread...) , RADIO_2.12.50.02_2 and the mentioned above RADIO_2.07.51.22_2.7z.
Should i just keep going?
One more thing. When 2.12 and 2.10 was installed, the phone restarted by its self after about 30-60 sec on htc bootscreen. if that means anything?
Pelle-pirk said:
Okay, thanks for your reply But i still cant make it work, are you sure its the radio causing this problem? I`ve now tried RADIO_2.10.50.28_2 (this is the only one with "50" in it among the recomended radios in the artemis thread...) , RADIO_2.12.50.02_2 and the mentioned above RADIO_2.07.51.22_2.7z.
Should i just keep going?
One more thing. When 2.12 and 2.10 was installed, the phone restarted by its self after about 30-60 sec on htc bootscreen. if that means anything?
Click to expand...
Click to collapse
It's usually the radio that's the problem -- if your phone gets stuck on the bootscreen.
I'm not sure what else might be the problem.
Just in case, try this: Task 29, flash a .50 radio, flash a stock ROM (via USB), hard-reset.
If that fails, I don't know what else to say...
i tried the task 29 witout luck A couple more weird things though.. when i try to install a rom from the memory card, the bootloader doesn`t start the installation. I just says "serial". And Yes its formated with fat32 and im sure im doing it right. The other thing is that the phone starts by itself about 60sec after plugging in the charger.. i`m guessing this have to be a hardware problem. might be the usb connector as many seem to have problems with.
I`ve now put in a stock spl and will send it back for repair tomorrow.
Dammit, hspl i still there. Is the only way to remvoe it by using the sd-card? then i might be fu..ed regarding the warranty :S
Pelle-pirk said:
Dammit, hspl i still there. Is the only way to remvoe it by using the sd-card? then i might be fu..ed regarding the warranty :S
Click to expand...
Click to collapse
I think so. Someone with more experience might be able to provide a more confident answer.
Are you sure you're renaming the ROM as "LEOIMG.nbh" (no quotes) and putting it in the root of the SD-card?
Pelle-pirk said:
i tried the task 29 witout luck A couple more weird things though.. when i try to install a rom from the memory card, the bootloader doesn`t start the installation. I just says "serial". And Yes its formated with fat32 and im sure im doing it right. The other thing is that the phone starts by itself about 60sec after plugging in the charger.. i`m guessing this have to be a hardware problem. might be the usb connector as many seem to have problems with.
I`ve now put in a stock spl and will send it back for repair tomorrow.
Click to expand...
Click to collapse
Hello dude!
Try using a microSD smaller than 8gb and formated with FAT32 (it's a known fact that 16gb microSD does not work for flashing.....).
If you want to remove the HSPL there is 2 ways:
1 - Flash a stockROM via SDcard, like you are trying to do.
OR
2 - Use the HSPL2 program to revert to the original SPL state.
If you could enter the bootloader, probably your phone does not need any special repairs.. Anyway.......
Try using a smaller SDcard to flash the radio and the ROM again. You could also try flashing via USB/PC.....
Do not forget to redownload the ROM, it could be a "bad download".
For more info take a look here:
http://forum.xda-developers.com/showthread.php?t=609477 --> Flashing guide for noobs
http://forum.xda-developers.com/showthread.php?t=611433 --> HSPL thread
Good luck!!
maybe a fix
Pelle-pirk said:
Yesterday i put my hd2 in my pocket without locking the screen. when i heard it surfing around the menues i took it back up and tried to take it back to homescreen. As many times before the phone refused to respond so i took out the battery. But when powering it back on the **** wont pass the htc startup-screen!
I have read around this forum quite alot now and i have done hard reset a million times, i have installed an original updated rom from htc`s site. When this didn`t work i installed hspl3, Artemis v270 NOR and RADIO_2.07.51.22_2. And it still wont start!
Im getting quite sick of experimenting, so i`d be really happy if any of you smartguys could help me
Click to expand...
Click to collapse
hello guys,
someone at htcedia posted this fixes:
1) Install you HSPL.
2) Install your cooked rom.
3) Upgrade your radio. (Leo_RADIO_2.10.50.26)
4) Do Hard reset. (Hold Vol up and down also end call button) then press (Red reset button under back cover next to battery)
Fixes Freezing on HTC bootup screen.
and for me, when i remove the micro sd card the phone bootup but when the micro sd card is in the phone it wont.
so try to remove the micro sd card then reset a hard or soft reset ur device, keep ur micro sd out until ur r completely loaded, then put ur sd card back in the phone.
Hello guys i have a problem with my HTC HD2.
I have searched a lot on this site before posting my problem.
This is what happens and what i did:
The phone doesn't pass the white HTC screen with the RGD letters below.
What i have tried:
HSPL 2.08.HSPL, 1.66, 1.42, 2.08.000
Radio: Leo_RADIO_2.08.50.05, Leo_RADIO_2.15.50.14
Roms: Stock Vodafone (Dutch) rom, Energy rom
Hard reset (vol up +down on startup).
Tried task 29 and started everything all over again
I went to the a phone store, they couldnt help me. Afterwards i went to the official store but i don't have my receipt anymore so i don't have a warranty..
So i think i have tried everything i could find on this forum. Tried most of the HSPL versions with diferent roms. But all of them stay on the startup screen (white htc start screen)
If someone can help me please, this is really my last chance
Thanks,
Issam
ps. i hope this is the good section to post this problem.
Well the phone starts up now (it actually works for a few minutes!). I haven't changed anything, the only thing i did is leave the battery out for like 1 hour. But everytime i start up the phone it freezes and / or turns of after 1 min or something. Sometimes it doesn't even boot up like the usual problem, but then i remove the battery for 10 minutes and it boots normal again.
So i really don't have a clue
i was experimenting all day again with my htc.
What i found out was, the longer i keep my battery out of the phone the longer i can use it.
For example: I had the battery out of the phone for about 2 hours, when I put it back in i could use it for like 10 minutes.
But when i keep the battery out for 10 minutes it freezes within 1 minute.
Maybe this will help me get the solution to this problem.
I would format the sd card just in case, also make sure you have the correct versions of what you need, rom raido ect, because theres two types of HD2s, hope this helps!!
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
IssamRazza said:
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
Click to expand...
Click to collapse
You should remove hspl , and after that install the latest rom available on htc site for your device (download the rom from htc site, with your serial number ) . Official roms have included radio inside of them. If HSPL is removed and you have again problems with your device with an official rom installed, then you have a hardware problem. You could try to boot up without sd card installed, to see if the card is the problem.
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
IssamRazza said:
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
Click to expand...
Click to collapse
I see that you are on t-mobile network , so you should download your rom from here: http://www.t-mobile.com/wmupgrade/ . Just enter your imei and download the update. Remove HSPL and then install the official rom. Perform a hard reset after that , and see if is all ok . Keep us informed pls.
Hi, yes i have a T-mobile contract, but my phone is Vodafone branden so i'll have to download the Vodafone version I think.
But what i just did is this:
I had HSPL 2.08.HSPL and a Custom ROM on it. So I was planning on maybe sending it back. Thats why I performed a task 29 to delete all the previous (parts of the) Roms. After that i changed my HSPL to 1.66.000, the original spl I had on it.
But now the phone does vibrate when i hold the power butten (with vol down), but there is no picture, so i cant get into the phone or the Red green blue screen. So i think the phone will not boot because I deleted the Rom on the phone and also returned the spl to original.
Is there a solution for this problem? omg this phone just doesn't seem to be working for me (maybe it's me that is not working for the phone).
It is normal since you did a task29. Verify if you did it correctly here http://forum.xda-developers.com/showthread.php?t=644781
Yes i have read that thread thank you, but the question is:
How can i get the phone to connect with my PC, so I can install original ROM. Because the Boatloader screen won't start up, to make connection with my Computer. I press the power button and vol down butten at the same time. Tried it at least 20 times
Thanks you all. But i sent this phone back to HTC. The board was replaced and they sent it back, so it works again! finally my phone back