Hello there,
I installed Hspl a few days ago on my Virgin HD2 and have tried a few custom roms on it but i am sure this phone is faulty as it randomly crashes on all the roms i have tested.
My brother received this phone also and he has tried the custom roms and his is fine so i am planning on sending it back for an exchange.
I have read the instructions for uninstaling Hspl and watched the video so i downloaded the rom from the official HTC site and extracted the RUU_signed.nbh and renamed it to LEOIMG.nbh but when i hold the volume button down and press power on to load the LEOIMG.nbh off the memory card...it gets to the loading screen then shows me the screen with the SPL-1.42.HSPL on it.
I am a Noob so i am probably doing something wrong
Can anybody help me out please?
Thanks.
You need a GoldCard. You can not only put the "LEOIMG.nbh" on it. It will not work. Create a GoldCard, follow the instruduction and it will work fine.
http://forum.xda-developers.com/showthread.php?t=591239
Regards
crazy cat said:
You need a GoldCard. You can not only put the "LEOIMG.nbh" on it. It will not work. Create a GoldCard, follow the instruduction and it will work fine.
http://forum.xda-developers.com/showthread.php?t=591239
Regards
Click to expand...
Click to collapse
Your wrong... If he has HSPL, which he has, he can simply put the "leoimg.nbh" on the root on the memory card... Then, while turning it on, hold down the "volume down" button... That's what's HSPL is for...Remember to format the memory card in fat32... If you don't it won't work... The card that comes with the HD2 is formatted in fat16... Use fat32!
Edit:
Here is the "official" guide:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
But again... Remember to format your sd card in fat32.
Hello,
Thanks for the replies.
My card is formatted to Fat 32.....i switch the phone off then hold down on the volume then press power on...first the screen shows me the SPL-1.42.HSPL then "Loading" shows then it shows the SPL-1.42.HSPL again.
The words serial sometimes show at the bottom of the screen.
Do i need to hold or release the volume and power buttons for any length of time?
It looks like i was holding on to the volume down button too long.
Thanks for the help.
Hi, i am having a problem now.. I used the ruu from RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
as a LEOIMG.nbh to restore to SPL, the SPL done, back to 1.42, but now the problem is.. the screen jus freeze at the tricolour page and wont do anything else.. it wont boot to windows as well, if i remove my sdcard, only a grey triangle appears.. if i am using different ruu as leoimg.nbh, it will say not allowed.. jus now i was successfully installed HSPL, installed the RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
rom, and i was successfully remove all of those Telstra stuff.. then, i did wat i mentioned, trying to uninstall HSPL as a practice, and now i am stuck here.. i can't find any stock rom or original rom from anywhere.. PLEASE HELP!!!
0031nek said:
Hi, i am having a problem now.. I used the ruu from RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
as a LEOIMG.nbh to restore to SPL, the SPL done, back to 1.42, but now the problem is.. the screen jus freeze at the tricolour page and wont do anything else.. it wont boot to windows as well, if i remove my sdcard, only a grey triangle appears.. if i am using different ruu as leoimg.nbh, it will say not allowed.. jus now i was successfully installed HSPL, installed the RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
rom, and i was successfully remove all of those Telstra stuff.. then, i did wat i mentioned, trying to uninstall HSPL as a practice, and now i am stuck here.. i can't find any stock rom or original rom from anywhere.. PLEASE HELP!!!
Click to expand...
Click to collapse
Hi
Do a hard reset
Take 2gb card and format fat32 and download the rom from htc site using your serial number because You got the HD2 from Virgin uk means that it is factory unlocked and unbranded.
Extract the downloaded rom and rename the RUU signed nbh file to LEOIMG.nbh and put it into the root of the card
Now remove the battery put the card in the hd2
Press and HOLD the Vol down button until you see the bootloader
Then follow the screen
I hope this will work
Good luck
sabes143 said:
Hi
Do a hard reset
Take 2gb card and format fat32 and download the rom from htc site using your serial number because You got the HD2 from Virgin uk means that it is factory unlocked and unbranded.
Extract the downloaded rom and rename the RUU signed nbh file to LEOIMG.nbh and put it into the root of the card
Now remove the battery put the card in the hd2
Press and HOLD the Vol down button until you see the bootloader
Then follow the screen
I hope this will work
Good luck
Click to expand...
Click to collapse
Hi.
Also struggle with the fact that it freezes in the tri-color screen. Card is formated in fat32, file is renamed LEOIMG.nbh.
I get the text 'serial' in the white color part of the screen.
yeahbabyyeah said:
Hi.
Also struggle with the fact that it freezes in the tri-color screen. Card is formated in fat32, file is renamed LEOIMG.nbh.
I get the text 'serial' in the white color part of the screen.
Click to expand...
Click to collapse
Any ideas would be appreciated.
you can only install your authorised telestra ROM via HTC's stock RUU.exe without hspl. Perhaps do a [REQ] thread for the ROm to be posted by someone who can dump it.
chris_ah1 said:
you can only install your authorised telestra ROM via HTC's stock RUU.exe without hspl. Perhaps do a [REQ] thread for the ROm to be posted by someone who can dump it.
Click to expand...
Click to collapse
Say again please?
You need stock (only stock) SD 2GB Card that was with your phone.
After you found it, you need to download shipped rom from HTC official site for your region.
Then you have to open the .exe file with winrar and after it you have to unpack "RUU_Signed.nbh" to your SD card and rename it into "LEOIMG.nbh".
Then reload your phone with pressed "volume down".
And then you will follow instructions.
P.S. Sorry for my English, I am from Russia.
I have the same issue as mentioned above, i've used both the standard SD card that came with the phone and an alternative SD card that i know works and both have the Tricolour theme and serial at the bottom..
Any ideas driving me mad
wakers said:
I have the same issue as mentioned above, i've used both the standard SD card that came with the phone and an alternative SD card that i know works and both have the Tricolour theme and serial at the bottom..
Any ideas driving me mad
Click to expand...
Click to collapse
What exactly are you trying to do, what method are you using and where is it going wrong?
Mark.
Sorry just figured out i was leaving my finger on the volume down button to long..
Didn't realise i had to let go when the loading message comes on the screen..
Been struggling with this for a while but finally did it (thanks to wakers post above).... apart from all the normal instructions remember to let go of the volume down button as soon as the tri-colour screen appears!!
HackAJack said:
Been struggling with this for a while but finally did it (thanks to wakers post above).... apart from all the normal instructions remember to let go of the volume down button as soon as the tri-colour screen appears!!
Click to expand...
Click to collapse
Hi,
I have been having the same problem. I could really appreciate your help.
I need to remove HSPL from the phone as I have sold the phone & don't want to void warranty.
I Followed what Mskips thread said but still could not do it.
I have copied the NBH file from stock rom, renamed it LEOIMG.NBH & copied it to route of memory card that I formatted with FAT32.
Put the memory card in phone, held down the Volume Down button for three seconds & then held down the power button.
I would get the tricoloured screen with HardSPL info but nothing else would happen.
Some one on the forum said try formatting it FAT16 & see if that makes a difference. I tried this & I got slightly further, after the tricolour screens comes up I get a white screen that seize loading but nothing happen after that.
I tried letting go off the Volume button as soon as you see the tricoloured screen, but I am not getting any further i.e. flashing instructions.
Would really appreciate if you could help & tell me what roms etc you used so I can get this done.
This has been lingering for a few days now I have to post item on Tuesday
Please help
Thanks
JAW$
How long should it stay in loading mode??? i have a white screen with loading... at the top...it has been like this for 30min
in order to uninstall hspl to your phone....you need to know your original Stock rom....you should have backed up your original Stock rom before playing with your expensive phone....
JAW$ said:
Hi,
I have been having the same problem. I could really appreciate your help.
I need to remove HSPL from the phone as I have sold the phone & don't want to void warranty.
I Followed what Mskips thread said but still could not do it.
I have copied the NBH file from stock rom, renamed it LEOIMG.NBH & copied it to route of memory card that I formatted with FAT32.
Put the memory card in phone, held down the Volume Down button for three seconds & then held down the power button.
I would get the tricoloured screen with HardSPL info but nothing else would happen.
Some one on the forum said try formatting it FAT16 & see if that makes a difference. I tried this & I got slightly further, after the tricolour screens comes up I get a white screen that seize loading but nothing happen after that.
I tried letting go off the Volume button as soon as you see the tricoloured screen, but I am not getting any further i.e. flashing instructions.
Would really appreciate if you could help & tell me what roms etc you used so I can get this done.
This has been lingering for a few days now I have to post item on Tuesday
Please help
Thanks
JAW$
Click to expand...
Click to collapse
Try to check your sd card....it might be faulty....
Related
How do I flash my Titan if I cannot boot past the startup Verizon screen?
This is what I was gonna do. Use DCDs kitchen from 3.2.6 to make a NBH file, then rename it to TITAIMG.nbh, put it on a blank FAT32 formatted SD card, then startup into the bootloader, right?
Thanks for the help. I cannot boot past the start screen, because I tried the stupid 'Reloaded 1.3.4' ROM which did this, so is that what I need to do to flash from the SD card?
crobs808 said:
How do I flash my Titan if I cannot boot past the startup Verizon screen?
This is what I was gonna do. Use DCDs kitchen from 3.2.6 to make a NBH file, then rename it to TITAIMG.nbh, put it on a blank FAT32 formatted SD card, then startup into the bootloader, right?
Thanks for the help. I cannot boot past the start screen, because I tried the stupid 'Reloaded 1.3.4' ROM which did this, so is that what I need to do to flash from the SD card?
Click to expand...
Click to collapse
format a mSD card as FAT32, with a 1024 allocation size. (this important step MATTERS) put the TITAIMG on the root of the SD card, (if needed place the card back into your phone)
do a soft reset while holding the power and camera button. you should see the rainbow flag screen breifly, then a LOADING screen
if you followed directions carefully (1024 allocation size), you should be prompted to press the POWER button to continue.....go ahead, do it.
Ok, that confirms what I was going to do.
Just did it and everything is fine. I'm back to DCD 3.2.6.
Hey is 3.3.4 stable? I notice there was never an official thread on it. should I stick with 3.2.6?
crobs808 said:
Ok, that confirms what I was going to do.
Just did it and everything is fine. I'm back to DCD 3.2.6.
Hey is 3.3.4 stable? I notice there was never an official thread on it. should I stick with 3.2.6?
Click to expand...
Click to collapse
I always found 3.2.6 the best of his older ROMs. It is fine to stay with that.
Is this the first time you flashed by SD? You have been around for a while I could have sworn you had done it all, but you are saying that all this time you have been flashing through RUU and not SD?
An alternative to SD flash would be:
Hold down the camera button + power and hit reset with the stylus. This will put you in boot loader mode.
Connect to your computer USB and flash.
mike2037 said:
An alternative to SD flash would be:
Hold down the camera button + power and hit reset with the stylus. This will put you in boot loader mode.
Connect to your computer USB and flash.
Click to expand...
Click to collapse
Several people here are having issues with that method. That is the issue that I am having with the 6.5 roms. It only lets me connect one time through activesync via usb, then after that it rarely works.
serfboreds said:
I always found 3.2.6 the best of his older ROMs. It is fine to stay with that.
Is this the first time you flashed by SD? You have been around for a while I could have sworn you had done it all, but you are saying that all this time you have been flashing through RUU and not SD?
Click to expand...
Click to collapse
Lol, did you edit this post to remove the "cause waves a while back" comment? hehe
Yes, well, I "caused waves" because I found a way to edit the registry to enable to IR port to start working. It worked with an old PPC2003 program called Nevo, and I did in fact have it working with the ability to change channels on the TV and all, but you had to hold your PDA upside down, and the read the Nevo software upside down...it was a hassle. lol
But anyway, yes I cause waves becuase I had it working, and told them what to do to get it working, but none of them could, and they got all mad at me for some reason. Oh well, it was a long time ago, and I don't even use the IR feature anymore. Flashed 100 times since then, who knows what the reg settings are now.
crobs808 said:
Lol, did you edit this post to remove the "cause waves a while back" comment? hehe
Yes, well, I "caused waves" because I found a way to edit the registry to enable to IR port to start working. It worked with an old PPC2003 program called Nevo, and I did in fact have it working with the ability to change channels on the TV and all, but you had to hold your PDA upside down, and the read the Nevo software upside down...it was a hassle. lol
But anyway, yes I cause waves becuase I had it working, and told them what to do to get it working, but none of them could, and they got all mad at me for some reason. Oh well, it was a long time ago, and I don't even use the IR feature anymore. Flashed 100 times since then, who knows what the reg settings are now.
Click to expand...
Click to collapse
I didn't want to hear all about it so I took it out.
mike2037 said:
An alternative to SD flash would be:
Hold down the camera button + power and hit reset with the stylus. This will put you in boot loader mode.
Connect to your computer USB and flash.
Click to expand...
Click to collapse
Had an issue after flashing with 21169 (WM 6.5) after trying to restore a 6.1 backup, it was stuck on the boot screen. Was able to put in BL mode, then connect to PC and reflash, all worked fine...
Try renaming the .nbh file to TITAIMG.nbh and put it in a 1GB or less microsd card and then press the power button + the camera Button together and hold, and then press the reset button that is located next to your usb charging/syncing slot
good luck
Yeah, on a side note, I noticed that The card must be 2GB or less, and also you cannot use capital letters for the extension, it must be case sensitive
WORKS: "TITAIMG.nbh"
DOES NOT WORK: "TITAIMG.NBH"
HELP PLEASE !!!!!!!!!!!!!
I was trying to relock my mogule for the TEP and I was going to put the HTC sprint Rom back on. At the end of the Titan Relocker.exe process I was left with a Red, Green, Blue, and White screen that I can not get off. I have done a reset, Hard reset,bootloader reset nothing works it keeps coming back to the rainbow screen with writing on it that says: RUUNBH (upper right corner) TITA100 SPL-1.06.0000 CPLD-9. What can I do to fix?
You need to flash the stock rom. Are you flashing using a SD card, or USB? SD card would be 10x easier, as I've had problems connetion via USB while in bootloader.
Tyler
I was using USB for the relock.
I used SD card when I unlocked it the 1st time but I forgot how I did it.
I am pressed for time because I am going on vacation. How do I fix it?
Thanx.
Your device is in bootloader mode waiting for you to flash the stock ROM. Put the stock ROM on a SD card and flash it..press power/camera buttons while depressing the soft reset hole with stylus. Don't forget u have to rename the ROM to TITAIMG.nbh
Ok thanks, I will try it when I get home....
I thought I had already installed the Rom by USB but I guess it didn't take.
My computer act as if it was uploading to my phone, I will put the rom on SD and try it that way. I will let you know how it turns out.
Thanks!
what happens if I use a 4GB card?
slosho said:
what happens if I use a 4GB card?
Click to expand...
Click to collapse
bootloader will not recognize 4g. Has to be 2g or less formatted fat32
mattsm said:
bootloader will not recognize 4g. Has to be 2g or less formatted fat32
Click to expand...
Click to collapse
I was using the original 512 that came with the mogule.
Thanks for your input.
blueglide said:
Your device is in bootloader mode waiting for you to flash the stock ROM. Put the stock ROM on a SD card and flash it..press power/camera buttons while depressing the soft reset hole with stylus. Don't forget u have to rename the ROM to TITAIMG.nbh
Click to expand...
Click to collapse
Thanks it worked !!!!!!!!
What a great forum.....you probably could have searched and found all the info..but no one gave you a hard time and just HELPED....
Glad your phone works and have fun on vacation...
Hey guys, I havnt had a issue with my phone untill now, i installed energy rom a few days ago and i havnt had a issue however my ever my phone froze on me earlier so i poped out the battery and put it back in now it wont go past the splash screen, so ive tried to reinstall the at&t original rom and all and now i get the at&t splash but i get no where it just keeps reseting
Please Help!
sleepyzx said:
Hey guys, I havnt had a issue with my phone untill now, i installed energy rom a few days ago and i havnt had a issue however my ever my phone froze on me earlier so i poped out the battery and put it back in now it wont go past the splash screen, so ive tried to reinstall the at&t original rom and all and now i get the at&t splash but i get no where it just keeps reseting
Please Help!
Click to expand...
Click to collapse
Press and Hold the volume down key then push the reset button. When you see the tricolored screen, you can re-flash to a new ROM from there... just by launching a new flash.
thanks for responding yea i tried that i even reinstalled the energy rom but it still wont go past the splash
try flashing from you sd card, search flashing from sd card or something like that. I belive you have to format it in 32 mode and then take the rom "raphimg.nbh"(not exact spelling or proper spelling I beleive some of that has to be in capitals) sorry to here your phone is down. Try that and post your results.
Format the card FAT32. Place a rom on the card & rename the rom to RAPHIMG.nbh.
Put the SD Card in the slot & hold volume down & reset. Press the power button when instructed to do so on the screen.
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
sleepyzx said:
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
Click to expand...
Click to collapse
Try a different microSD. Also be sure that you did a full format not a quick format. I had an issue with a few microSD cards, but I like my 2GB PNY for flashing my phone via microSD.
I had the exact same issue after flashing the latest energy 3 rom
heres what i did
1. Reflashed Hard SPL
2. Flashed a stock HTC ROM, i managed to do this from my PC by manually entering the bootloader.
3. Did a hard reset
4. Let phone complete initial setup
5. Reflashed Hard SPL - Read somewhere that sock roms may overwrite \ partially overwrite Hard SPL
6. Flashed an Energy 2 ROM (only cause i wanted to check something out in it anyway)
So far its all looking good
sleepyzx said:
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
Click to expand...
Click to collapse
It happened for me with 2GB microSD. But magically after I did checkdisk/scandisk, the image found
shearsey said:
I had the exact same issue after flashing the latest energy 3 rom
heres what i did
1. Reflashed Hard SPL
2. Flashed a stock HTC ROM, i managed to do this from my PC by manually entering the bootloader.
3. Did a hard reset
4. Let phone complete initial setup
5. Reflashed Hard SPL - Read somewhere that sock roms may overwrite \ partially overwrite Hard SPL
6. Flashed an Energy 2 ROM (only cause i wanted to check something out in it anyway)
So far its all looking good
Click to expand...
Click to collapse
This look like some dangerous steps
Let me ask you guys, which version of Energy are you guys using?
monx® said:
It happened for me with 2GB microSD. But magically after I did checkdisk/scandisk, the image found
Click to expand...
Click to collapse
good to see you back, ive had similar issues with a my 16GB and 8GB aswell a few times i think its due to some corruption beeing made to the filesystem when we disconnect it to soon form the pc (using it as disc-drive) thats kinda the same thing that happens when u disconnect a usb-harddrive in windows while its in use by windows and tries to connect it with linux.
a really good disc-repair tool i stumbled upon is located here
http://www.cgsecurity.org/wiki/TestDisk
and just to make sure its done right as gsleon3 said, do as he said and make sure that you take the you take the ruu_signed.nbh and rename that to raphimg.nbh (not sure if it has to be in CAPS, im pretty sure ive done it like this RAPHimg.nbh lots of time)
...monx, it would be great to have you back cooking wonderful stew
cheers
@jonteponte
thanks for the tool. it is not case-sensitive but name-sensitive
i'm not going anywhere. always around
-freeheel is freedom, tried, i love it
monx® said:
@jonteponte
thanks for the tool. it is not case-sensitive but name-sensitive
i'm not going anywhere. always around
-freeheel is freedom, tried, i love it
Click to expand...
Click to collapse
@monx® you're welcome
if you ever come to the northern part of sweden just let me know and ill take you on trip, i have several pairs of skis and boots aswell =)
IT IS BOOT LOOPING
BUT WHEN BOOTING IT SAYS "STICK TOGETHER" AND UNDERNEATH IT SAYS NOT "TEST ONLY NOT FOR SALE" I GUESS I FLASHED THE WRONG ROM OR SOMETHING
AND IT'S LIKE THE BATTERY DOESN'T WORK OR SOMETHING, IT MUST BE PLUGGED TO TURN ON
I TRIED BOOTLOADER AND PC DOESN'T RECOGNIZE IT
so in the end can someone guide me on how to flash it back to stock rom?
I already downloaded the stock rom, I just need some more instructions
Thank you so much in advance, this is really stressing me out and I am about to give this as a gift too
Again, thank you and please give some advice
A new hacker said:
IT IS BOOT LOOPING
BUT WHEN BOOTING IT SAYS "STICK TOGETHER" AND UNDERNEATH IT SAYS NOT "TEST ONLY NOT FOR SALE" I GUESS I FLASHED THE WRONG ROM OR SOMETHING
AND IT'S LIKE THE BATTERY DOESN'T WORK OR SOMETHING, IT MUST BE PLUGGED TO TURN ON
I TRIED BOOTLOADER AND PC DOESN'T RECOGNIZE IT
so in the end can someone guide me on how to flash it back to stock rom?
I already downloaded the stock rom, I just need some more instructions
Thank you so much in advance, this is really stressing me out and I am about to give this as a gift too
Again, thank you and please give some advice
Click to expand...
Click to collapse
take out your SD card and put it in a card reader on your PC,
take the stock ROM and make sure you name it LEOIMG.NBH
move LEOIMG.NBH to the root of your SD card (not in any folder)
put your SD card in the phone, hold the vol-down button and press power (same time), it should ask you about flashing the ROM, hit power to flash the stock ROM.
orangekid said:
take out your SD card and put it in a card reader on your PC,
take the stock ROM and make sure you name it LEOIMG.NBH
move LEOIMG.NBH to the root of your SD card (not in any folder)
put your SD card in the phone, hold the vol-down button and press power (same time), it should ask you about flashing the ROM, hit power to flash the stock ROM.
Click to expand...
Click to collapse
It didn't work, I've moved it to the root of the memory card, vol down and power. It says Loading... then on top it says "00058002" I shall research more on this. Thank you for being the only one who replied, bless your soul
You flashed a MFG SPL test ROM...from which there is no escape. Basically you are SOL unless you send your device back to HTC for a warranty repair.
http://forum.xda-developers.com/showthread.php?t=668347
and
http://forum.xda-developers.com/showthread.php?t=655653
These might help. There's alot of reading to do.
Do you have a T-Mobile USA HD2?
If so, and these links don't help, try looking further in the TMOUS HD2 Fora
If you can't get out of SPL 2.02, the ROM in my sig is not watermarked, and works quite well. If you can't escape 2.02, this ROM is your only option
How much is it to get replaced/repaired by HTC? Not T-Mobile because it's out of contract the day I bought it. (Unless they have a cheaper plan of course *wink)
Thanks hugggs, I've tried that before, but now it's still dead. Thanks though. I guess you can help me by scouting your local craigslist for an EVO or HD2, buy it, I'll paypal you and you can send me the phone. lol in my dreams
bout a hundred and forty dollars for a new mainboard. (which is what they will say they had to replace).
read THIS thread for a solution. theres a version of hspl that supports spl 2.02 on page 7
It's not 2.02 it's 2.00.1000
I guess I would send it back to repair, I flashed a test rom so it should be official right? The radio I don't think it's been tinkered with (or all radios are official)
My Hero has been under water for a sec, and is stuck in "HERO" .
Then I guess somthing still is working inside.
Is it a worth try to reinstall a ROM?
I see that this issue already has been written about, but I will really appreciate an explanation for a dummie
Will the unit be able to start a reinstall if a new software is placed onto the memory card? Is the fact that the phone shows "HERO" a sign that the boot process reaches the point to start a reinstall?
If so, can anyone please link me the appropriate ROM and explain what to do?
Is the ROM an .exe file?
I have tried the trick to reset the unit by pressing HOME, BACK and hit the POWER buton. The unit got into the meny and I selected RESET or something but it did solve the problem . I do not know any other easy trick.
Thanks!
Is ur phone rooted? if so try holding the HOME key then power on the device and that will get u into recovery screen, there, try flashing a new ROM u can find plenty here:
http://forum.xda-developers.com/forumdisplay.php?f=512
any post that starts with [ROM], cz that really depends on ur taste and choice I mean this is wt android is about isn't it
mulkave said:
Is ur phone rooted? if so try holding the HOME key then power on the device and that will get u into recovery screen, there, try flashing a new ROM u can find plenty here:
http://forum.xda-developers.com/forumdisplay.php?f=512
any post that starts with [ROM], cz that really depends on ur taste and choice I mean this is wt android is about isn't it
Click to expand...
Click to collapse
Think I got the Phone reinstalled via SD Card now with original ROOT.ZIP.
It is not rooted. However, it does not boot an further that the "HERO" screen....
Are there anything else to try?
Get an RUU from HTC's website, thats rescued a few soft bricks that i got. Although you may have damaged some internal components.
Sent from my Hero using XDA Premium App
JieeHD said:
Get an RUU from HTC's website, thats rescued a few soft bricks that i got. Although you may have damaged some internal components.
Sent from my Hero using XDA Premium App
Click to expand...
Click to collapse
This is what I did:
Downloaded the ROM-:2.73.405.5 from HTC.
Installed in windows 7 and took the ROOT.ZIP file from the installation TEMP folder, renamed it to HEROIMG.ZIP and put it to the clean FAT32 SD card and booted the HERO.
The HERO installed the file without any fault messages,
but still the unit does not boot any further than the "HERO" white letters...
I guess this is it...I need a new print card for the phone? I have checked the contacts inside the HERO, they seem ok.
When putting the unit to charge the orange light lits, but disappear when pressing power button - however, the battery DOES charge.
Why did you extract the ROM.zip, just let the RUU run its course. It'll fix any software issues that may exist.
Sent from my Hero using XDA Premium App
This - and two weeks of vacation worked - thanks!