First of all thanks to all which are posting specially to Sauron!
If you want to make your Drone working with Archos, here is what I did:
Get root access:
1) Install SDE
2) Get the initramfs from this post (download the kernel+init.zip and extract it): http://forum.xda-developers.com/showpost.php?p=9948644&postcount=1
3) Replace the zImage with the new overclocked kernel
4) Boot into SDE recovery menu and copy the initramfs.cpio.gz and zImage through USB cable
5) Boot into SDE developer OS
6) You should get all your apps here and have superuser right now
Suddenly no wpa_supplicant was not working on mine, so you have to change configuration file wpa_supplicant.conf to get Adhoc:
1) get Rootexplorer
2) open root explorer and find /data/misc/wifi/wpa_supplicant.conf
Here is mine (second network is my normal router):
update_config=0
ctrl_interface=tiwlan0
ap_scan=2
network={
ssid="ardrone_108549"
key_mgmt=NONE
priority=1
mode=1
}
network={
ssid="BytecekG"
psk="PASSWORD"
key_mgmt=WPA-PSK
priority=1
}
4) overwrite wpa_supplicant.conf in Archos with new content
5) change rights to wpa_supplicant.conf to RW-RW-RW-
6) delete file tiwlan.ini
7) start drone and then wifi on Archos
When you restart you should repeat step 5 and step 6 and step 7.
GOOD LUCK, IT WAS HORROR TO GET THIS WORKING
Two programs for Ar drone:
http://www.rafoid.com/2010/12/ardroid-2/?lang=en - nice but I have problems with connection link
http://www.meavydev.co.uk/ARDrone.html not nice but more working
Thank you very much for sharing. But this method still not work with Ad-Hoc from MyWi app on iPhone.
It works...kind of. I get connected and occasionally will download. but I have to keep refreshing till it finally works. I would say it was my phone -- Mortorola Droid 1 -- but my daughter Ipod touch word seamlessly.
Its working only for a few seconds for me
I am able to connect to adhoc wifi network ('wireless tether for root' application on my android phone), but i am able to surf only for a few seconds. After that, connection is dying I dont know why. I think its related with the absence of tiwlan file.
jakkrith said:
Thank you very much for sharing. But this method still not work with Ad-Hoc from MyWi app on iPhone.
Click to expand...
Click to collapse
I got my a70 works using MyWi of iPhone with WEP enabled
just need to add one line (wep_key0)
update_config=0
ctrl_interface=tiwlan0
ap_scan=2
network={
ssid="enter your ssid"
key_mgmt=NONE
wep_key0=enter your key
priority=1
mode=1
}
Your link: http://forum.xda-developers.com/show...44&postcount=1 Doesn't work. Its truncated. Can you edit or PM me the working link please.
**EDIT Correct link is: http://forum.xda-developers.com/showpost.php?p=9948644&postcount=1
same to u, now i can connect for a few second using barnacle in x10. thanks
When i am using my backflip (custom rom - netfiler enabled) and 'barnacle' or 'wireless tether for root' the connection is dying after a few seconds. But when i am using wmwifirouter with my HTC TILT 2 (Touch Pro 2) - WM 6.5, i dont have any problems at all. The connection is working really good.
Strange ...
For step 5 and 6, I think we can edit init.rc script to do it automaticaly ?
I don't see why MyWi is so popular since TetherMe has been released. Best $2 I ever spent and works fantastically with my A101 via Bluetooth tether (unfortunately Archos doesn't have the drivers for the USB). Setup couldn't be simpler.
FCNantes said:
I got my a70 works using MyWi of iPhone with WEP enabled
just need to add one line (wep_key0)
update_config=0
ctrl_interface=tiwlan0
ap_scan=2
network={
ssid="enter your ssid"
key_mgmt=NONE
wep_key0=enter your key
priority=1
mode=1
}
Click to expand...
Click to collapse
What channel did you set your mywi to? I tried your method but it didnt' work.
barely works
I've done this a couple if times and it is very tedious and the connection sucks. Its not wroth it IMO and luckily I made copies of my files before I edited or deleted them BC my normal wireless wouldn't work unless I went through the last steps again. In settings - wireless would just say "error". Don't try this IMHO!
jakkrith said:
Thank you very much for sharing. But this method still not work with Ad-Hoc from MyWi app on iPhone.
Click to expand...
Click to collapse
Sorry to ask, why you need MyWi when you can use bluetooth tethering between Archos and iPhone?
bthoven said:
Sorry to ask, why you need MyWi when you can use bluetooth tethering between Archos and iPhone?
Click to expand...
Click to collapse
So multiple people can use my internet, and the bluetooth tethering is sketchy, connects/disconnects randomly, especially when device goes to sleep.
bthoven said:
Sorry to ask, why you need MyWi when you can use bluetooth tethering between Archos and iPhone?
Click to expand...
Click to collapse
For me, I have a Samsung Fascinate. When I use wireless tether bluetooh, i get an error my phone saying it is in an unknown state reboot, i reboot and get the same error....everytime....so bluetooth tether is not an option for everyone....
Haven't tried this yet, just rooted with archangle, have to study this option...
liutszho said:
So multiple people can use my internet, and the bluetooth tethering is sketchy, connects/disconnects randomly, especially when device goes to sleep.
Click to expand...
Click to collapse
Bluetooth. Tetheing with my iphone 3gs is quite stable even when iphone display is off. I think bluetooth tethering also consumes less power.
Sent from my A70S using Tapatalk
Archos 70 can't save changes to wpa_supplicant
I trying to make changes using Root explorer and it's answers: changes saved old file saved as ....bak but nothings happen.
Am I doing anything wrong?
in regards to apps hopefully most will find this one NICE and USABLE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AR.Pro Lite - v1.1
AR.Pro Full Version - V1.1
YES !
Thanks to you and by using these instructions, I was finally able to tether my Archos 101 with my Sony X10a Android phone running on version 2.1. I tried everything I could to try tethering these 2 either with Bluetooth or via Wifi. This modification to the wpa_supplicant file and deleting the tiwlan.ini file has made adhoc tethering working with Barnacle on the X10. I can't thank you enough !
i've just found an option for ad-hoc mode in tiwlan.ini, which by default is disabled:
WiFiAdhoc = 0
anyone tried to set it to 1 and this way the step 6 could be skipped
moreover that after restart it always restores deleted tiwlan.ini, and you should delete again
Related
Anyone found a solution to the bluetooth failure following 2.1? Can send FROM laptop but phone wont send out.........
my problem is the other way round.. phone will send to laptop.. but laptop WON'T send to phone..!!
Weird or what. I've contacted SE who say they know of nothing wrong and suggest PC companion repair as the BT may be corrupted......................
At least it sends my phonebook to the handsfree.............
Time to repair, I think (again)
Strange I never had a problem with my bluetooth sending and receiving...!!
Anyways this thread might help you :
http://forum.xda-developers.com/showthread.php?t=840575
Have you tried using astro bluetooth module?
Sent from my Xperia X10i (2.1 and rooted) using XDA app
Look up "bluetooth fix" in the market, I found 2 which seemed to help reset it but not sure which worked coz I stupidly activated both without fully testing between each one
So far none of these suggested solutions work for me. I'm unable to send from PC to phone. I get the "No services found" message. Win 7 32-bit. Used to work fine on 1.6.
no sevices here also. windows 7 64b, fine sending to the laptop but from the laptop is a no go.
i use bluetooth file transfer from the market which works fine but this should be working from stock.
yea.. but blue tooth fix is only for root user
I have discovered that if I send an image TO the phone from the lappy i can then send that image FROM the phone. Anything original from the phone says ' task cannot be undertaken.
ALSO
MW600 receives music and mutes it when calling or being called but the call is not transferred! WTF?
BUT
Handsfree speakerphone works.
Come on SE pull out the finger, it all worked properly under 1.6..........
Looks like its my dongle. Just tried with another laptop and all was fine............................... Bum.
I 've a problem with my car audio unit. They can't see each other :-(
Blaupunkt and Xperia X10 2.1
tetracortica said:
yea.. but blue tooth fix is only for root user
Click to expand...
Click to collapse
My phone is rooted but Bluetooth Fix did nothing other than resetting all my bluetooth settings!
Result. All now fine. I replaced the bluetooth driver software on the computer, which must have upgraded stuff because all now works.
If you have a similar problem phone to laptop I suggest you replace the bluetooth stck on your lappy.
How did you remove the BT drivers? (stupid question?)..
You need to go to Control Panel - System and Security - Device Manager - Network and Adapters.
Problem is every time I try to update my bluetooth drivers it gets to "validate bluetooth device" and then it stalls there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the device is not 'one of theirs' Widcomm/Broadcom stack won't support it. My dongle was using the Microsoft drivers and would not work with the phone. I could send to but not receive UNLESS I sent something back I had previously sent if you see what I mean.
I have Win7 64bit with broadcom/widcomm BT and having No Services Found problem... I've managed to send files from PC to X10 by using Windows default Bluetooth File Transfer:
- on your PC go to C:\Windows\System32\
- find and select fsquirt.exe
- right click on it and click copy; paste it as a shortcut on your desktop
- now just drag the file you want to send to fsquirt - Shortcut and follow the instructions and it will send
hope it will also work for you
with 1.6 i was able to browse files on the sd card via windows explorer ("Browse files on your X10a" link in BT windows settings), then copy and paste files/photos to my desktop. It was very convenient and easy, like copy/paste from a flash card to hard drive, but via BT.
Now with 2.1 this option is gone (old BT drivers or the latest broadcomm ones - does not matter - it's no longer there). So how do I get it back? Any apps that have a similar functionality?
Bennachie said:
Anyone found a solution to the bluetooth failure following 2.1? Can send FROM laptop but phone wont send out.........
Click to expand...
Click to collapse
no problem here sending from phone to pc and viceversa,,, rare you have that issue
DISCLAIMER: I AM NOT THE ORIGINAL "FOUNDER" OF THIS METHOD AND ALL CREDITS GO TO THIS ENTIRE COMMUNITY FOR HELPING ME OUT!
Many people including myself has found their phones having issues with gaining full network access to whatever router they try to connect to after the latest 2.3.3 update. After some fierce searching on XDA Forums and Facebook I found a very noobish/easy yet helpful workaround. To be able to connect to your home router you will need to use the good old fashioned Static IP sollution.
For you who are new to this here are the following steps of the entire procedure:
STEP 1:
On your phone, go to the "Wi-Fi settings" section and choose advanced options which will allow you to check the "use static IP box"
STEP 2:
Under the checked box there are now several boxes available where we will put some numbers (boxes are: IP adress, Gateway, Subnet mask, DNS1 and DNS2)
To find this info you will need to open CMD on your PC (search CMD and it will pop up) and type in the following: ipconfig /all
STEP 3:
By now you will have a long list of different information, however there is a section named "Ethernet Adapter Local Area Connection" under which all the information we actually need is located. To make matters easier I have included a partial screen shot pointing out the info needed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Type the information you see into the appropriate sections in the phone except for the IP adress wich you will need to change the last digit of in order to prevent an IP conflict between the PC and the phone. (the last digit should not be used by any other device on the network so any unused number should work)
IMPORTANT
With static IP enabled you will only be able to connect to your home network and not to any network outside your home, but then again any connection is better than no connection at all. Just remember that this is a temporary solution until SE fixes the problem.
DNS1 and DNS2 are the same?
I tried this yesterday, yes phone will connect to wifi, but will not download anything. update now working Did like you said changed IP last number
Hey guys,
my wifi is giving me some trouble... i cant find my router with the phone. Already tried blade wifi fix and some other stuff but it just cant find it. Other devices can find it and connect without a problem.
The x10 just cant find it. Anyone encountered this problem and managed to find a work around?
I dont think the "static ip" will work in my case, cause i cant even find the router to connect to.
I'm on WB latest rom, with Speed&Fix005 installed.
Cheers
EddyLe said:
DNS1 and DNS2 are the same?
Click to expand...
Click to collapse
No, the DNS 1 and 2 are not the same. The last two digits are different if you look at the numbers according to the instructions
What do I do if I use 2 different wifi spots. One for home and one for work.
This will only make it work at home.
Cant believe that Sony Ericsson released a firmware where the wifi dont work
Any news about Sony want to fix the problem ?
If you want to use the phone in several Wi-Fi networks you will have to enter the information of that specific network just as the instructions shows. Sadly, for us suffering from this problem Sony Ericsson still havent responded to this issue that also exist in the ARC. It is also a fact that ARC users have been complaining for months without proper response.
Is there any other rom that fix the problem ?
I would like to use the original firmware. But if a custom firmware dont have the problem I would happily use that.
[
Another quick work round which maintains flexibility I find is to download and install an app called 'wifi static'.
Just curious if anybody else had there stop working last night . Mine will come on and show that its up and running but when I go to hook up its not on my list of available networks? And no it's not my laptop, I also checked with my OG Droid and it doesnt see it either. I have tried reinstalling and Iget the same result .
Thank god for the new cwm Tether app. It would be no internet for without it . Any help would be appreciated .
Mine is working perfectly. 3.1-Pre110 Experimental.
y0himba said:
Mine is working perfectly. 3.1-Pre110 Experimental.
Click to expand...
Click to collapse
Which rom? Wifi and Wired stopped working for me after Fryo. Gingerbread 2.3.3 and 2.3.4 both give me some kernal unsupported error.
Ive never been able to get it to work either. My laptop wont connect to the network.
Sent from my Eclipsed and ICS themed X2.
Eclipse ROM 2.0.3, 2.3.5 based. The kernel error can be ignored, I get the same error, access control is unsupported with our kernel.
Be sure that WiFi Tether has ROOT access. It only works with rooted phones.
I have mine set up like this:
Device Profile: Auto
Setup Method: Auto
WiFi Encryption: Enabled
Encryption Setup Method: Auto
I have a passphrase set, changed my SSID, wireless channel is default, Don't disable Bluetooth is checked.
Enable access control is greyed out. It is unsupported by our kernel which is why we get the error.
I do not have automatic shutdown checked. Idle time is greyed out until you select automatic shutdown.
Preferred and alternate DNS are default, as is the rest of the settings dialog.
I tried just before and my laptop or tablet connected but wasn't loading any pages. I know it worked when I had liberty 2.3.4, man looks like I have to go back to 2.3.4. I tried both wifi tether app and the hot spot.
All I can say is try this:
Go into settings...applications...all...let it load, scroll to WiFi Tether. Force stop if it is running, clear cache and data. Uninstall it, then re-install the latest version.
http://code.google.com/p/android-wifi-tether/
I am currently using my laptop tethered to my Droid X2 running Eclipse 2.0.3. Download 1.43Mbps, upload 0.94Mbps.
Make sure you have root. If you are on Eclipse ROM, then you do.
EDIT: I may have found your problem. When you upgraded to the latest version of WiFi Tether, did you uninstall the old one first? I upgraded right after I posted this, and then experienced the same issues as you. It also shut down my WiFi and Bluetooth when I uninstalled it. I rebooted, but the phone rebooted itself after about 30 seconds, so when I got back into the phone I quickly booted into BSR, cleared cache/dalvik, rebooted, reinstalled the latest, and now it is working again with no issues.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ya , I had to uninstall and then install the newest version . I thought I had been discovered by big red. Anyways thanks for all your help.
So it's working for you then?
Sent from my Eclipsed/Supercharged Droid X2 using XDA Premium
mine seems to be working on eclispse ROM using wifi tether version 3.1-beta 11. connects to my tablet with no problems
Yes I have been back up since reading your reply last week . Thank you , myphone is my only link to the internet and I dont know if I could live without it!
Anyways, Thank you!!!!!
Good to hear! Thanks for the reply.
Holy crap, I fixed something!
Used DoomLord? root and UNroot last night. Worked great both ways on a Samsung Exhibit II. Re ran and rooted my phone then installed the latest beta 11 version. Could not get it to shut down. Selecting stop gave no errors but app would not stop transmitting. Uninstalled and installed 2.0.7. No more problems. Works great. Also installed it on a Samsung Transform Ultra with no problems.
I have a situation in which I would like to completely disable WiFi functionality. In other words, the user should not be able to connect to any network regardless if WiFi is on or off in the Settings. Is this possible by modifying the file system?
It would be nice too, if WiFi could be re-enabled later with adb.
Thanks in advance.
maybe
system\etc\permissions\android.hardware.wifi.xml
<!-- This is the standard feature indicating that the device includes WiFi. -->
<permissions>
<feature name="android.hardware.wifi" />
</permissions>
not tested yet
Can't you simply turn off the Wi-Fi in Setting as in normal case?
Thanks for the replies.
I tried messing with the permission values in the xml but was still able to connect.
@Kermit33 - My situation is that I have kiosk tablets in retail stores and don't want associates to download the OTA for ICS, and want to prevent them from connecting to Wifi at all.
I am currently implementing condi's solution of renaming Automagic.apk to Automagic.apk.bak, but wanted some extra assurance they wouldn't be able to update.
I decided to just configure the tablet for kiosk, and send them out with Settings.apk disabled so they wont be able to add a WiFi network at all.
Thanks.
ifn0tzer0 said:
My situation is that I have kiosk tablets in retail stores and don't want associates to download the OTA for ICS, and want to prevent them from connecting to Wifi at all.
Click to expand...
Click to collapse
Look into blocking the tablets via the router's settings. Using each tablet's MAC address, you should be able to block them from connecting to the router. You should also be able to set the router to block access to Sony's info.update.sony.net web site from where all of the OTA updates are downloaded. Blocking access to Sony's web site will keep the tablets from being updated but will still allow access to other Internet web sites.
Cat McGowan said:
Look into blocking the tablets via the router's settings. Using each tablet's MAC address, you should be able to block them from connecting to the router. You should also be able to set the router to block access to Sony's info.update.sony.net web site from where all of the OTA updates are downloaded. Blocking access to Sony's web site will keep the tablets from being updated but will still allow access to other Internet web sites.
Click to expand...
Click to collapse
Thanks Cat, I'll try that out.
Or, using titanium backup, freeze the system update app.
Thanks for the replies guys, so here's an udpate.
I ended up trying a lot of different things but managed to disable wifi with a custom /system/build.prop.
Before:
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
After
wifi.interface=
ro.ethernet.interface=
ro.ethernet.autoEnable=no
Also set
ro.sony.update.server=info.update.sony.net
To
ro.sony.update.server=
Rebooted and within the Wifi settings, it simply states "Error" after trying to connect. Within WiFi settings, the option to add a WiFi network is disabled. See screenshot below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update:
So this works on rooted ICS as well. All that is really needed for HC and ICS is, in /system/build.prop
Change:
wifi.interface=wlan0
To:
wifi.interface=
From the command line or batch:
Code:
::Remount /system as writable
adb shell "su -c 'mount -o rw,remount -t yaffs2 /dev/block/mmcblk0p2 /system'"
::Search for anyline containing "wifi.interface" and replace entire line with "wifi.interface="
adb shell "su -c 'sed -i 's/.*wifi.interface.*/wifi.interface=/g' /system/build.prop'"
::Optional, remove sony udpate url
adb shell "su -c 'sed -i 's/.*ro.sony.update.server.*/ro.sony.update.server=/g' /system/build.prop'"
Reboot for changes to take effect.
ifn0tzer0 said:
Thanks for the replies.
I tried messing with the permission values in the xml but was still able to connect.
@Kermit33 - My situation is that I have kiosk tablets in retail stores and don't want associates to download the OTA for ICS, and want to prevent them from connecting to Wifi at all.
I am currently implementing condi's solution of renaming Automagic.apk to Automagic.apk.bak, but wanted some extra assurance they wouldn't be able to update.
I decided to just configure the tablet for kiosk, and send them out with Settings.apk disabled so they wont be able to add a WiFi network at all.
Thanks.
Click to expand...
Click to collapse
Reboot?
Sent using the LG GT540 Polishblood PreRC CM9 4.0 using XDA Premium
ifn0tzer0 said:
Thanks for the replies guys, so here's an udpate.
I ended up trying a lot of different things but managed to disable wifi with a custom /system/build.prop.
Before:
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
After
wifi.interface=
ro.ethernet.interface=
ro.ethernet.autoEnable=no
Also set
ro.sony.update.server=info.update.sony.net
To
ro.sony.update.server=
Rebooted and within the Wifi settings, it simply states "Error" after trying to connect. Within WiFi settings, the option to add a WiFi network is disabled. See screenshot below.
Click to expand...
Click to collapse
You can just change the update server only
Sent using the LG GT540 Polishblood PreRC CM9 4.0 using XDA Premium
Hi guys,
I have a problem with the Ad-hoc internet sharing from my laptop to my Galaxy S3. It seems to be a problem with the S3 (rooted, but still on stock firmware) since the Ad-hoc method worked just fine with my old Galaxy S on CM9.
What's even funnier is that the S3 doesn't even detect the Ad-hoc Wifi Network... Any thoughts?
Thanks in advance
Try to add the Network manually and input the SSID (Network Name) and Security type and password.
Some android device may have a trouble when adhoc from notebook. The default ROM usually have this kind of problem.
How to Fix wifi Adhoc Problem;
1 Download wpa_suppliacant (delete .txt extansion)
2 Open ES Explorer / Root Explorer
3 Go to /system/bin/
4 Rename wpa_supplicant to wpa_supplicant_backup (just for backup)
5 Copy the wpa_supplicant file that you got from download to /system/bin/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6 Select wpa_supplicant -> properties -> change permission
7 Change the permission to rwx r-x r-x
8 Restart the device
Download Support File ;http://mobilecon.info/wp-content/plugins/download-monitor/download.php?id=Download+wpa_supplicant
Make adhoc connection from laptop (windows7)
Laptop settings;
1 Go to control panel -> network and internet -> network connection
2 Choose Lan card that using for connection, and then right click -> propertis -> share
3 Check all options, click OK
4 Choose Wifi connection, and then right click -> Properties
5 Now we make a static IP address
6 go to control panel -> all control panel items -> network and sharing center
7 For make a Adhoc network, click on wireless network -> add -> choose adhoc network
8 for security choose open (if you choose WEP type, it cannot detect from your smartphone).
9 wait for a moment
10 and you got your adhoc connection
Android settings
1 Go to Menu -> setting -> wireless and network setting -> wifi settings
2 Go to Menu -> Advance -> check ‘use static IP’
3 Done, you can try to connect using wifi adhoc connection (mark * before SSID, mean adhoc wifi)
Note: If your connections fail, try to turn off firewall and anti virus in Laptop
this method didn't work on galaxy s3
it makes it unable to even turn on the wifi
this method didn't work on galaxy s3
Click to expand...
Click to collapse
A lot of people have come up with the same idea, none successful to date.
Use the free program 'Connectify' on your computer, the networks it creates are "real" infrastructure AP and as such can be used by the S3.
Android doesn't support this out of the box, u need to apply patches to enable it to work...
Sent from my GT-I9300 using xda premium
could you please tell me if it worked for youe galaxy s3?
It does not work on my Galaxy S III.
For windows 7 laptops, perhaps just install connectify to save the hassles.
mhotspot
use this attachment to create hotspot.
enable ad hoc for jellybean, ics with infrastructure Wi-Fi windows 7
try this and let me know if it work http://forum.xda-developers.com/showthread.php?t=1928282
james300 said:
try this and let me know if it work http://forum.xda-developers.com/showthread.php?t=1928282
Click to expand...
Click to collapse
hi, and for the xp users, is there a solution ?
is there a solution for windows xp?
Try this
****tyMF said:
Hi guys,
I have a problem with the Ad-hoc internet sharing from my laptop to my Galaxy S3. It seems to be a problem with the S3 (rooted, but still on stock firmware) since the Ad-hoc method worked just fine with my old Galaxy S on CM9.
What's even funnier is that the S3 doesn't even detect the Ad-hoc Wifi Network... Any thoughts?
Thanks in advance
Click to expand...
Click to collapse
Try this..it worked for my S4:good
search on Youtube following keywords...
How to connect android phone to an ad-hoc network without software