What version is fastest and what is the newest? The .504 is only for uk?
2.0.2.A.0.24 Is newer. It has a faster gui and other pros. The other version is available in all the world. Regards
Just get the newest. I'ts rootable and custom themes will be adjusting to it.
Is there a thread or place with all the links to download the latest firmwares (ordered by version)?
I tried this one:
http://forum.xda-developers.com/showthread.php?t=825664
But there they don't specify if the firmwares are 2.0.2.A.0.24 or 2.0.A.0.504 (I tried the UK one, but I found that it's 2.0.A.0.504).
I've an X10 Mini E10i. Any help?
Thanks in advance.
Not sure whether .24 is newer. When I plug in the usb pc companion prompts me to update the software even though it's on 0.24. I haven't tried updating cause all it will do is install a patch to remove the root.
As stated in the Wiki:
http://forum.xda-developers.com/wiki/index.php?title=Xperia_X10_Mini_Official_ROMs
The .24 is newer than the .504
Hi.
I have found very little difference between .504 & .24 (Agreed, .24 is newer) I think that the primary purpose of it was to stop ROOT.
I use JIT and the performance via Linpack is always above 7.00 MFLOPS (Almost twice as fast as standard!). I had these results on both versions.
.504 currently has the better compatability for themes... until people port them to .24.
Hope this helps
deano309 said:
Hope this helps
Click to expand...
Click to collapse
Of course it helps! A LOT, indeed!
But the thing is that, if I want to use your ROM, I can't because of this NOTE:
deano309 said:
NOTE: You must already be running Firmware 2.0.A.0.24 or it may cause your device to boot infinately (Or not at all!)!!!
Click to expand...
Click to collapse
Sooo... where can I get a .24 Firmware? (right now I've a 504 and I want to change it). I've checked the forums, but people usually write the version but not the build
alexrsj said:
Of course it helps! A LOT, indeed!
But the thing is that, if I want to use your ROM, I can't because of this NOTE:
Sooo... where can I get a .24 Firmware? (right now I've a 504 and I want to change it). I've checked the forums, but people usually write the version but not the build
Click to expand...
Click to collapse
OK, here is a quick step by step:
1. Download, Install and run SE Update Service (Backup ALL data first!).SE Update Service
2. Once phone is updated, ROOT it following this guide: SuperOneClick v1.5.5 (Modified)
3. Install XRecovery on your device using this guide: [RECOVERY]
4. Copy the zip file with one of my updates to your SD Card, start XRecovery & choose to install!!!
That easy!!
deano309 said:
OK, here is a quick step by step:
1. Download, Install and run SE Update Service (Backup ALL data first!).2. Once phone is updated
Click to expand...
Click to collapse
I can't update my phone to .24 using SEUSS because that firmware is not available from my operator/country yet (the software says that I already have the last version -even when I was with the 1.6 firmware!-).
In fact, the .504 wasn't available either, so I flashed it manually with an UK ROM that I found in this forum withouth knowing it was .504...
alexrsj said:
I can't update my phone to .24 using SEUSS because that firmware is not available from my operator/country yet (the software says that I already have the last version -even when I was with the 1.6 firmware!-).
In fact, the .504 wasn't available either, so I flashed it manually with an UK ROM that I found in this forum withouth knowing it was .504...
Click to expand...
Click to collapse
I just posted something similar for someone else.
Check out this post: http://forum.xda-developers.com/showpost.php?p=10591343&postcount=6
deano309 said:
I just posted something similar for someone else.
Check out this post: http://forum.xda-developers.com/showpost.php?p=10591343&postcount=6
Click to expand...
Click to collapse
Wow! Thanks A LOT! I'm going to try it right now and will keep you all informed!
you guys might want to check this out too.. (if you don't have any joy with the build.prop edit)
http://forum.xda-developers.com/showthread.php?t=884771
good luck
Related
I have the X10i from China and it's in 1.6
I did the "official" update to 2.1 but lost Marketplace and everything relating to the West (youtube, facebook, twitter).
I wanted to know if I can go back to 1.6 and use the 1 touch root app to root the cell that way.
After I root it, how can I update the Android OS? Also what is the highest OS that can be run on the X10? Can we use 2.2 if we root the cell?
Thanks.
necrogodomega said:
I have the X10i from China and it's in 1.6
I did the "official" update to 2.1 but lost Marketplace and everything relating to the West (youtube, facebook, twitter).
I wanted to know if I can go back to 1.6 and use the 1 touch root app to root the cell that way.
After I root it, how can I update the Android OS? Also what is the highest OS that can be run on the X10? Can we use 2.2 if we root the cell?
Thanks.
Click to expand...
Click to collapse
Flash to nordic or global FW then... There is a tutorial at the Development thread. Use z4Root after you upgrade it too 2.1
Thanks, I'll give it a try.
Thanks, worked.
Still running on the Chinese Android 2.1 though, no market.
At least it's rooted well enough that I can just add files if I want if I can find them.
Thanks for the help.
necrogodomega said:
Thanks, worked.
Still running on the Chinese Android 2.1 though, no market.
Click to expand...
Click to collapse
Had you of flashed the Global or Nordic you wouldn't be and would have the Market.
i am a new user and a total noob to linux and android
XperiaX10iUser said:
Had you of flashed the Global or Nordic you wouldn't be and would have the Market.
Click to expand...
Click to collapse
ok i have considered debranding my phone from at&t i'm running an experia x10 a sadly i was bought into the idea of an update to 2.1 so i figured y not and got my phone but sadly as we all know no update so is there a way i can debrand my phone flash to a nortic firmware and root it when i get the seus update without bricking my phone? please help me out i tried rooting it but if it's not sourced in the market the security blocks it so i'm not sure what the deadl is at&t needs to get with the program and take a **** on steve jobs desk and demand we get our just desert with se se needs to have google **** down their throats if they all worked togeather it would be a good thing
gothicasshole said:
so is there a way i can debrand my phone flash to a nortic firmware and root it when i get the seus update without bricking my phone?
Click to expand...
Click to collapse
Yep, see here - http://forum.xda-developers.com/showthread.php?t=825201, when you've done search the Market for z4Root and root with the app.
i have a problem as well, i updated my phone but the firmware still says 1.6 ..
help please?
hey it says its not compatible with 1.6 so idk whats gonna go on at&t hasn't released the eclair yet am i just going to have to wait or what? and z root didn't root titanium backup said not rooted and i couldn't download busy box so yea idk it's on lock down by at&t
ok my basic need is i need to flash the nortic so i can update useing seus then once i get 2.1 i can root it but i have 1.6 i need a flash tool to get the nortic so i can upgrade this pos
gothicasshole said:
ok my basic need is i need to flash the nortic so i can update useing seus then once i get 2.1 i can root it but i have 1.6 i need a flash tool to get the nortic so i can upgrade this pos
Click to expand...
Click to collapse
Reading posts might be a start...
XperiaX10iUser said:
Yep, see here - http://forum.xda-developers.com/showthread.php?t=825201, when you've done search the Market for z4Root and root with the app.
Click to expand...
Click to collapse
Well I did try to flash it to the Global 2.1, but even after it flashed, it was still the same Chinese one. So I guess it's something I did totally wrong then.
So I'll just keep it as it, I'm not sure what else I can do besides constantly trying to flash every copy of global 2.1 I can download and hoping that one of them will take.
Thanks for the advice though.
Hello, I have an X10 I got from 3 in Australia, it is unlocked and I now use the Optus Network on prepay. The phone uses the Android 1.6 software but from what I understand there is a 2.1 or 2.2 update available.
I'm quite keen to first debrand the 3 phone as I find that I can't use any of the Android features with this network like Maps, YouTube Gmail etc from the icons as they just get a network error. I can manually browse the internet but not use the icons. I can use it when I use 3 network. I took it to Optus but they said it's because it has the 3 branding that they can't help me and I need to debrand it or contact SE.
So I would like to debrand the phone and then update it to the latest software but I'm not sure where to start. I'm not a developer so I need a simple and easy to follow tutorial if there is one.
Start by reading this thread - http://forum.xda-developers.com/showthread.php?t=825675
Get the flash tool from here and flash your phone
Also suggest rooting your phone, which you can find here
You'll find plenty of resources. If you need more help search the forum and you'll find plenty of answers. Don't worry, you don't need an engineering degree for this. Just follow the instructions.
Good luck.
thanks but the first 2 links go to similar page and they post say this in the first few lines:
"(old 1.6 Firmware can not be flashed with this at the moment)."
My phone still has 1.6
badgebeager said:
thanks but the first 2 links go to similar page and they post say this in the first few lines:
"(old 1.6 Firmware can not be flashed with this at the moment)."
My phone still has 1.6
Click to expand...
Click to collapse
here try this http://forum.xda-developers.com/showthread.php?t=747598
and then download root explorer
and then try this http://forum.xda-developers.com/showthread.php?t=824711
hey batman, thanks for the links. With the 2nd link for root exp, it says this on the page:
"This will only work for Rooted X10i, Android 1.6
NOT FOR X10a, SO-01 or Mini (Pro)"
As far as I know my phone is the X10a model,how can I know and do you have a link for the root explorer for that model?
badgebeager said:
"(old 1.6 Firmware can not be flashed with this at the moment)."
Click to expand...
Click to collapse
Which means you can't flash 1.6 FW with it. Read the thread again as that will debrand and update you at the same time.
I'm finding it all to be very confusing. I wonder if I can get it flashed and debranded in a mobile store or something?
badgebeager said:
I wonder if I can get it flashed and debranded in a mobile store or something?
Click to expand...
Click to collapse
Or you could read the threads and just do it yourself.
Bin4ry said:
Okay guys.
Here is new X10flash for Firmware 2.1 Version
Windows 7/Vista Users should diasable UAC!!
Download Flasher: (Update 14.11.2010) GUI VERSION!!!
http://www-stud.uni-due.de/~sfanmakr/X10Flash/X10Flash-2.1.zip
HOWTO for Flasher here:
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
You will see that there is a new Folder "firmware" the firmware files must be inside this folder!
Download Firmware:
X10i:
http://www.multiupload.com/G9TENJASZI Nordic Thanks to imugur and Reb0rn
http://www.multiupload.com/RTIIRCEN79 GERMAN
http://www.multiupload.com/YM6SANFJXK CH (thanks to pippolino)
X10a:
http://www.multiupload.com/M048IDMI4L ROGERS (thanks to henh)
http://www.multiupload.com/ZGI6JWKIPG GENERIC (thanks to BluechipJ & batman112)
Put the extracted files into the new "firmware" Folder and run the X10flash.bat
SO-01:
http://www.multiupload.com/E3C7FRFAQ9 DOCOMO (thanks to indigomode)
You have to wipe your USERDATA !! This is important, otherwise you will enter Bootloops etc.
Also be sure SEUS is NOT running! (But at least it should have detected your phone once)
IF YOU HAVE PROBLEMS LIKE "Unable to Open Channel" please try this guide:
thanks aussiesausage
http://forum.xda-developers.com/showpost.php?p=8945542&postcount=72
Click to expand...
Click to collapse
badgebeager said:
I'm finding it all to be very confusing. I wonder if I can get it flashed and debranded in a mobile store or something?
Click to expand...
Click to collapse
Here is the link to Bin4ry's thread on the flasher. http://forum.xda-developers.com/showthread.php?t=827065
Same guy this is just about the flasher. Also, in that thread is the link to non-GUI version, some people find it easier to use.
The original flash tool only had 2.1 Nordic (X10i), 1st released and was described from that point of view.
Now there are ROMs for X10i, X10a, most 2.1 generic, some 1.6. The original descriptions have not been fully updated to reflect all.
badgebeager said:
I'm finding it all to be very confusing. I wonder if I can get it flashed and debranded in a mobile store or something?
Click to expand...
Click to collapse
hey man, its really quite easy. where in aussie are ya? if you are in newy, i'd be happy to help out
otherwise, back everything up that you want to keep (mostly contacts and pics). If you download z4root and titanium backup you can backup any apps that you have installed/bought also!
use the Binary flash tool to install 2.1 over the top of your 1.6 - it does not matter what version you have using Binarys installer - it just works
Then once 2.1 is installed and up and running, then you setup the market and download z4root (click the app to root your phone), titanium backup (to remove any crappy apps u dont want + schedule backups of the ones that u wanna keep).
Hope that all makes sense
Hi All,
I've recently purchased an X10 and while its quite a nice phone, I'm sure it would be a hell of a lot nicer if it was running 2.1 - some things which are "missing" in 1.6 have started to annoy me haha.
To this end, it would appear Telstra are about the slowest telco on the planet to release an update. My current firmware is as follows:
X10a
Country: Australia, Brand: Telstra
Phone Software Version: 1227-4612_R2BA023 GENERIC
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net (google finds it, I'm not allowed to link yet sorry!) and debrand it, SEUS will then automatically update my phone to 2.1 next time I try to update.
Can anyone tell me what is a good X10a firmware for use in Australia? Note that it needs to be X10a since I use an 850MHz "nextg" network. The list on the link above appears to give me a rather limited set of choices, none of which sound generic or australian (what makes latin america latin america??).
If anyone could give me some hints that would be most apprecitated!
Thanks,
Tom
draget said:
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net
Click to expand...
Click to collapse
Which no doubt stems from xda, so you might as well use the original guides from here.
X10Flash 2.1 final & 2.1 Firmware (Update Flasher 14.11.2010)
That will debrand and update you to 504 firmware, then you can install xRecovery, then install a prerooted .24 which is the latest FW, which can't be rooted in the usual methods just yet.
And give this a read too - Step By Step Flashing 1.6 - 2.1
Aside of Xperiax10user advice. After you are done with the upgrade to. 504 2.1 version I recommend you to follow this easy thread to install Xrecovery, delete Junk apps and install Zdizihu's JIT v2...
http://forum.xda-developers.com/showthread.php?t=895351
After that you'll be set to start enjoying your X10...
Jim
Sent from my X10i
jimbo77 said:
Aside of Xperiax10user advice. After you are done with the upgrade to. 504 2.1 version I recommend you to follow this easy thread to install Xrecovery, delete Junk apps and install Zdizihu's JIT v2...
Click to expand...
Click to collapse
Do that after getting to .24
draget said:
Hi All,
I've recently purchased an X10 and while its quite a nice phone, I'm sure it would be a hell of a lot nicer if it was running 2.1 - some things which are "missing" in 1.6 have started to annoy me haha.
To this end, it would appear Telstra are about the slowest telco on the planet to release an update. My current firmware is as follows:
X10a
Country: Australia, Brand: Telstra
Phone Software Version: 1227-4612_R2BA023 GENERIC
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net (google finds it, I'm not allowed to link yet sorry!) and debrand it, SEUS will then automatically update my phone to 2.1 next time I try to update.
Can anyone tell me what is a good X10a firmware for use in Australia? Note that it needs to be X10a since I use an 850MHz "nextg" network. The list on the link above appears to give me a rather limited set of choices, none of which sound generic or australian (what makes latin america latin america??).
If anyone could give me some hints that would be most apprecitated!
Thanks,
Tom
Click to expand...
Click to collapse
1. Watch this tutorial.
2. Go here and download the flash tool and the X10a 2.1 world generic.
3. Flash the firmware as in the tutorial.
4. Enjoy!
Tom, I had exactly the same issue with Telstra. My brother is with Optus and had his months ago. I finally cracked it and de-branded my phone, installed 2.1 and it all went fine. Trust me its worth it. Then i rooted it and have'nt looked back... goo luck mate
Hi,
Thanks for the advice! I followed the tutorial and updated to 504, then flashed again to .24, however on both of these my bluetooth does not work :-/ Windows 7 shows nothing in the services menu and the phone seems to pair with devices but never connect. Also the .24 ROM available appears to have been a X10i ROM, this doesn't seem to have mattered though as 850MHz HSDPA still seems to work.
Any thoughts on fixing bluetooth?
I haven't installed the rooted version btw and I'm not quite sure what xrecovery does? Thanks!!
Fixed BT - turns out it didn't like to talk to my MacBookPro on Windows - updating Boot Camp drivers to 3.2 fixed that.
As for xrecovery, what does it do? And how does one root 0.24?
Thanks for the help!
Tom
draget said:
=I haven't installed the rooted version btw and I'm not quite sure what xrecovery does? Thanks!!
Click to expand...
Click to collapse
You could have saved time and flashed straight to it using SEUS if you didn't want to root.
draget said:
As for xrecovery, what does it do?
Click to expand...
Click to collapse
Allows you to flash to the phone at boot, so you can install custom and user ROMS, themes, and pretty much anything else.
draget said:
And how does one root 0.24?
Click to expand...
Click to collapse
XperiaX10iUser said:
X10Flash 2.1 final & 2.1 Firmware (Update Flasher 14.11.2010)
That will debrand and update you to 504 firmware, then you can install xRecovery, then install a prerooted .24 which is the latest FW, which can't be rooted in the usual methods just yet.
Click to expand...
Click to collapse
So you need to use the flashtools to flash back to 504, root, install xRecovery, then install the Pre-rooted .24.
batman_112 said:
1. Watch this tutorial.
2. Go here and download the flash tool and the X10a 2.1 world generic.
3. Flash the firmware as in the tutorial.
4. Enjoy!
Click to expand...
Click to collapse
Thanks for clarifying - it seems to be working nicely now so I'm pretty happy haha I'll get bored and have a go at rooting it eventually! After putting 504 on SEUS told me I was up to date, but all is good now
Just now I connected my Mini with latest 0.24 firmware version installed. SEUS is showing new update available. I have not updated as I have some urgent calls to come. Anybody can checkup. I have a nordic build.prop. Waiting for some great news
Good luck
new update also here in italy, same as you but italian build.prop
Yep ! New 2.1.1.А.0.6. Last SuperOneClick root mini successfully.
what changes do we have with this new version?
Termodonte said:
what changes do we have with this new version?
Click to expand...
Click to collapse
Old bugs fixed, new added
+ new app: OfficeSuite Demo
who have a new update, please give a namber of build.prop
Thank's for attention
i reflashed today using seus after probs with my memory card,im still on same firmware but have a new app called application installer
Squezzz,
http://www.sony-ericsson.ru/forums2/index.php?showtopic=62443 (in Russian)
xrecovery works great with 2.1.1.А.0.6, but let's wait new versions of jit update and themes update, old versions could brick your phone
does it really worth upgrading and go again into reinstall everything?
cheers
Anyone got the update on x10 mini pro?
Ive changed to the the nordic build.prop and the latest one ive got is .24
rikirix said:
does it really worth upgrading and go again into reinstall everything?
cheers
Click to expand...
Click to collapse
before updating with SEUS, I unrooted the phone with superoneclick, then I updated the phone but no need to reinstall everything (pheew )
Termodonte said:
before updating with SEUS, I unrooted the phone with superoneclick, then I updated the phone but no need to reinstall everything (pheew )
Click to expand...
Click to collapse
thanx mate....if i unroot i'll have some things not working....jit....link2sd.....and others....did u find some real improvements on the .24 version?
cheers
Termodonte said:
before updating with SEUS, I unrooted the phone with superoneclick, then I updated the phone but no need to reinstall everything (pheew )
Click to expand...
Click to collapse
And then you re-roooted again after update and have all the apps including Link2SD functioning properly?
BTW this update doesn't seem to have anything great which can equal the pain taken to reinstall everything. If Termdonte's process works OK universally then it can be tried.
Hoping for Tattoo 2.2 port by Contrarian / CM 2.2 by Mikevhl to work then only i may do a full upgrade.
sur1k said:
Squezzz,
http://www.sony-ericsson.ru/forums2/index.php?showtopic=62443 (in Russian)
Click to expand...
Click to collapse
No man, it's for X10, not for X10mini/pro.
parthabhatta said:
And then you re-roooted again after update and have all the apps including Link2SD functioning properly?
BTW this update doesn't seem to have anything great which can equal the pain taken to reinstall everything. If Termdonte's process works OK universally then it can be tried.
Hoping for Tattoo 2.2 port by Contrarian / CM 2.2 by Mikevhl to work then only i may do a full upgrade.
Click to expand...
Click to collapse
I didn't have link2sd installed so i can't tell you if after the update it will keep working. anyway, root with superoneclick works with this new version too.
its a minor update 2.1.1.a.0.6
easily rooted and Link2sd working fine
all i can see is the
support for arabic and Persian languages,
icon change for support and
anonymous statistic unloader (to sonyericsson)
heard that moxier mail is interated in timescape but cant tell yet
NO MULTITOUCH
Can anyone post prop file so that i can update my x10mini?
mclaudio said:
Can anyone post prop file so that i can update my x10mini?
Click to expand...
Click to collapse
i have the original build prop file for my x10 mini (not pro) backupped with adb mask controller, and my mini (ITA) is ready for update is it ok?
i think its ok. does it have english language?
Hey, I'm on rogers in Canada and was having a hell of a time getting rooted 2.3.3 on my phone without unlocking the bootloader(no point in unlocking the BL for just root .... especially w/the warranty problems). I figured I'd give Working Root on 2.3.3 ! a try but had trouble finding the right firmware to downgrade to and when I tried to update OTA it kept failing after downloading and trying to install it (looked like it went all the way through the process but the phone would reboot and say "update failed").
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf (it's .184) with flashtool and then re-setup my apns to get 3g etc working. I downloaded the generic ftf off a thread on these forums but couldn't remember exactly which thread so I recompressed it and uploaded it to multiupload to make it a little easier to get all the needed files
2./ Rooted with Chainfire's Gingerbreak apk
3./ OTA update and it worked (before I did a clean install I was having the ota update fail, probably because I had removed a few system apps via root uninstall, I just made sure that all I did this time after the fresh install was root and then update)
Note on Gingerbreak: I've seen this exploit take 5 minutes or a few hours to grant root on devices. Be patient, if it's still hasn't worked try re-seating or swapping your memory card for a different one and try again. Also be sure you're on 2.3.2, SE patched gingerbreak in their release of 2.3.3.
[FAQ]
1./ I don't have ota updates available in my country, will this still work for me?
Answer: Yes, this installs the global firmware to your phone, after that your phone will look for global updates rather than carrier specific updates.
2./
nelly_boy said:
I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
Click to expand...
Click to collapse
Answer
step 1./ google your carriers apn settings
step 2./ enter them in settings/wireless & networks/mobile network settings/Access Point Names (make sure you set up your mms apn if you want working mms as well, info for your carrier is available on google, that's where I found mine.)
step 3./ Profit
ncaissie said:
Yes you can use wi-fi. and Like I said OTA is safe it is the PC update that bricks.
Just follow those steps. It's easier than I expected.
Edit:
The things not mentioned in the OP is that you need to download a file manager to install the Gingerbreak. And you need to enable the “Unknown Sources” in the apps settings to install Gingerbreak.
After it roots it will reboot and you should see a new app called Superuser in your app list.
Then get Titanium Backup to uninstall thing you don’t want or move apps fully to the SD card. If you are not in the UK the BBC player is no good to you. I think there is a thread with a list of apps you can safely remove
Click to expand...
Click to collapse
thanks just to clarify.
We can use a rogers branded xperia play and flash the uk firmware? will it not mess up anything?
RacecarBMW said:
thanks just to clarify.
We can use a rogers branded xperia play and flash the uk firmware? will it not mess up anything?
Click to expand...
Click to collapse
Not at all. You just have to re-setup your apn settings.
I'm using a Rogers Play on the UK firmware on a Bell sim card
Thanks for that man I'm gonna give it a go right now
update: hells yea boy! it worked! it worked! rooted 2.3.3!!!!!!!
Sent from my R800i using XDA App
Willis111 said:
Hey, I'm on rogers in Canada and was having a hell of a time getting rooted 2.3.3 on my phone without unlocking the bootloader. I figured I'd give Working Root on 2.3.3 ! a try but had trouble finding the right firmware to downgrade to and when I tried to update OTA it kept failing after downloading and trying to install it (looked like it went all the way through the process but the phone would reboot and say "update failed").
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf with flashtool and then re-setup my apns to get 3g etc working. I downloaded the generic ftf off a thread on these forums but couldn't remember exactly which thread so I recompressed it and uploaded it to multiupload to make it a little easier to get all the needed files
2./ Rooted with Chainfire's Gingerbreak apk
3./ OTA update and it worked (before I did a clean install I was having the ota update fail, probably because I had removed a few system apps via root uninstall, I just made sure that all I did this time after the fresh install was root and then update)
Click to expand...
Click to collapse
You beat me to the punch , I was gonna try that last night but was having connect to network problems.
@Emann56 - Was still your idea, just figured I'd try it with a fresh install of a different firmware and post my epic results. All thanks goes to you and whoever helped with your thread ofc and especially Chainfire!
thatsupnow said:
Thanks for that man I'm gonna give it a go right now
update: hells yea boy! it worked! it worked! rooted 2.3.3!!!!!!!
Sent from my R800i using XDA App
Click to expand...
Click to collapse
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Will this work in the Netherlands or will there be no OTA update available?
Willis111 said:
@Emann56 - Was still your idea, just figured I'd try it with a fresh install of a different firmware and post my epic results. All thanks goes to you and whoever helped with your thread ofc and especially Chainfire!
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Click to expand...
Click to collapse
Yea man I had cm 6.1.3 on my x10 and I loved it! Already loving the rooted 2.3.3!
Sent from my R800i using XDA App
awoken said:
Will this work in the Netherlands or will there be no OTA update available?
Click to expand...
Click to collapse
You would have to find that out for yourself, it's in settings/about phone/Software Update/Update Now. If this says no updates available then I guess OTA updates aren't available in that region at the moment.
Willis111 said:
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Click to expand...
Click to collapse
Oh god yes please. I miss my power control in notification and the screen on/off animations
thanks ma man worked like a champ.
awoken said:
Will this work in the Netherlands or will there be no OTA update available?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14690329&postcount=29
that's what I think, basically your phone will stop asking for Netherlands ota updates and search the net for UK updates.
Willis111 said:
http://forum.xda-developers.com/showpost.php?p=14690329&postcount=29
that's what I think, basically your phone will stop asking for Netherlands ota updates and search the net for UK updates.
Click to expand...
Click to collapse
Willis111 is right, I performed the process here in the US today and no troubles finding the OTA update, despite the message there was no OTA before I flashed to .184 UK generic. Should work for you as well.
axiomjunglist said:
Willis111 is right, I performed the process here in the US today and no troubles finding the OTA update, despite the message there was no OTA before I flashed to .184 UK generic. Should work for you as well.
Click to expand...
Click to collapse
Thanks for confirming
Thanks for the thread. Just one question. I'm on 2.3.3 (no root) and dont want to wait longer for a working 2.3.3 GingerBreak. But i want to keep all my apps/settings. Can i downgrade to .184 UK generic without losing all my data?
Edit:
Another question:
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf with flashtool and then re-setup my apns to get 3g etc working.
Click to expand...
Click to collapse
If i dont do a clean install...what about the apns? Will they stay too? In my own thread:
http://forum.xda-developers.com/showpost.php?p=14705145&postcount=4
FrAsErTaG said that i can choose to not flash the userdata. I already found the option within the Flashtool. Are my apns a part of the userdata or will they get overwritten/deleted anyway?
Edit: Forget everything. It worked
I didnt wipe anything or "clean" my system. I just did the downgrade. After that, i got 1 issue. I always got this message: "android.process.acore has stopped". Google said that this is an issue with synchronize the contacts, etc. But i didnt freak out I just installed GingerBreak, did the root, then the OTA, and after OTA everything was fine again. Now i have full rooted 2.3.3
Willis111 said:
Thanks for confirming
Click to expand...
Click to collapse
Happy it works!
Thanks for the info, I can confirm that this procedure worked for me as well. I'm now running v2.3.3 Rooted with a locked bootloader on my originally locked R800a from Rogers!
How do you do an OTA update on Rogers if it is not here yet?
ncaissie said:
How do you do an OTA update on Rogers if it is not here yet?
Click to expand...
Click to collapse
My XPlay was originally purchased from Rogers. But since I've had it, I unlocked its network, flashed it with the Generic UK .184 firmware and Rooted it with GingerBreak v1.20. When I checked under "Settings\About phone\Software update\" and manually searched for an update, it was able to find it, download it and install it.
Sweet, Thanks