CAn help me Anybody?? with:
HTC Legend USB BRICK Without Root, Any SOlution??
Im sure someone found out a solution. Keep searching the xda forums. You may have to go beyond the Legend community
But Im dead sure I have read it...bit complicated but it worked for the poster.
genzalo said:
CAn help me Anybody?? with:
HTC Legend USB BRICK Without Root, Any SOlution??
Click to expand...
Click to collapse
If you still have warranty - claim it.
If not - u can try this http://forum.xda-developers.com/showpost.php?p=9889284&postcount=60
genzalo said:
CAn help me Anybody?? with:
HTC Legend USB BRICK Without Root, Any SOlution??
Click to expand...
Click to collapse
Do it all from here [HOWTO] USB Unbrick.
Only one thing you need more to do.
After
Code:
fastboot oem boot
your phone will start normally.
Download and install -- VISIONary, then starts and select 'temproot now', then you can continue with the instructions from point 2, 3, and etc.
Sorry for my bad English
HpX said:
If you still have warranty - claim it.
If not - u can try this http://forum.xda-developers.com/showpost.php?p=9889284&postcount=60
Click to expand...
Click to collapse
Doesn't work, my pc reconoigze the phone like an unknown device, and sdk still is waiting device, any other solution??
genzalo said:
Doesn't work, my pc reconoigze the phone like an unknown device, and sdk still is waiting device, any other solution??
Click to expand...
Click to collapse
Il look into it, and come back to u..
Btw: do use Windows, OsX or Linux?
Ps, can a mod move this thread to general..
I send you a private message with instructions.
Io4 gave you a good answer to solve the issue in the post 4.
Greetings.
HpX said:
Il look into it, and come back to u..
Btw: do use Windows, OsX or Linux?
Ps, can a mod move this thread to general..
Click to expand...
Click to collapse
I use WIn7 32bits or WinXP 32bits. I probe in 3 pcs
Hey....
I had the same problem.....
What i did is:
I removed the cable
Booted into bootloader
went to fastboot
and connected the usb
After that, my pc detected some device...not the the mom card or phone...
Again after that, i booted into bootloader, connected the usb, and went to recovery...it went to the screen with the phone and the exclamation, and the pc made 4 or 5 connected and disconnected sounds...
I then powered the device on, and lo and behold! It recognized my phone and everything was back to normal...
This is just something that worked for me, as i was in a USB brick...prior to this, i was not able to connect to the pc, and the charger was not fluently or continuously charging the phone.
Hope this helps someone....
Cheers
Related
Hi.
I need some help with my phone.
I tried unlocking the bootloader with SE Xperia Flasher but something went wrong.
I got to the point where it rebooted the phone, but when I got back in Windows my PC wont recognize my phone, I can't even charge it with a wall contact.
Is this possible to break thru the software? Because I sure didn't do anything to damage it physically.
Thanks for all your help
Anyone? =/
Stockis said:
Hi.
I need some help with my phone.
I tried unlocking the bootloader with SE Xperia Flasher but something went wrong.
I got to the point where it rebooted the phone, but when I got back in Windows my PC wont recognize my phone, I can't even charge it with a wall contact.
Is this possible to break thru the software? Because I sure didn't do anything to damage it physically.
Thanks for all your help
Click to expand...
Click to collapse
No, you cant brick your phone until bootloader is fully unlocked.
You can only get into "sof brick" state which is followed with red led blinking (three times after SE logo). I think this is that state, but, you didnt mentioned how is your device behaving now...
HeliumX10 said:
No, you cant brick your phone until bootloader is fully unlocked.
You can only get into "sof brick" state which is followed with red led blinking (three times after SE logo). I think this is that state, but, you didnt mentioned how is your device behaving now...
Click to expand...
Click to collapse
Strange. I don't get any red LED blinking. My phone boots with a blue LED (Fastboot?) and then turns on normally, I can use WIFI and Bluetooth and that's all I've been able to try so far. Haven't had any chance to test if it works with phone calls since i have no sim card for it. If it is "soft bricked", is there any possibility to know it for sure?
Thanks for helping me out
Stockis said:
Strange. I don't get any red LED blinking. My phone boots with a blue LED (Fastboot?) and then turns on normally, I can use WIFI and Bluetooth and that's all I've been able to try so far. Haven't had any chance to test if it works with phone calls since i have no sim card for it. If it is "soft bricked", is there any possibility to know it for sure?
Click to expand...
Click to collapse
If your phone boots up normally it means, thats not bricked
Dont know what blue led during bootup means, but didnt see it anytime on locked bootloader, so I expect that you were succesfull and have unlocked bootloader It probably is fastboot mode.
Remember that Windows recognize only devices in usb debugging on and with proper adb drivers installed.
Stockis said:
Thanks for helping me out
Click to expand...
Click to collapse
Use Thanks button
HeliumX10 said:
If your phone boots up normally it means, thats not bricked
Dont know what blue led during bootup means, but didnt see it anytime on locked bootloader, so I expect that you were succesfull and have unlocked bootloader It probably is fastboot mode.
Remember that Windows recognize only devices in usb debugging on and with proper adb drivers installed.
Use Thanks button
Click to expand...
Click to collapse
Well, that's good news.
Haha might be, if I'm lucky. ANy idea how to check if it really is unlocked?
Strangest thing is that the phone is recognized by the PC now, a few days later, doing nothing. Just plugged it in and both charger and USB connection os recognised. Really didn¨t do anything at all to make it work
What do you give me if I use the thanks button?
Stockis said:
Haha might be, if I'm lucky. ANy idea how to check if it really is unlocked?
Click to expand...
Click to collapse
Yes, try to flash any kernel for locked bootloader. If it will be successful, you are on unlocked bootloader If not, ant it will return error at the beginning of the flashing, you are still on locked bootloader.
Stockis said:
Strangest thing is that the phone is recognized by the PC now, a few days later, doing nothing. Just plugged it in and both charger and USB connection os recognised. Really didn¨t do anything at all to make it work
Click to expand...
Click to collapse
Windows... Windows... Dont you know them ?
Stockis said:
What do you give me if I use the thanks button?
Click to expand...
Click to collapse
Sorry, nothing except help
But trying to get more thanks because it will allow me to easily join the developers section. So expect thanks from every helpful posts
Stockis said:
Well, that's good news.
Haha might be, if I'm lucky. ANy idea how to check if it really is unlocked?
Strangest thing is that the phone is recognized by the PC now, a few days later, doing nothing. Just plugged it in and both charger and USB connection os recognised. Really didn¨t do anything at all to make it work
What do you give me if I use the thanks button?
Click to expand...
Click to collapse
To check if your bootloader is unlocked or not :
http://forums.asf-mobiles.com/Threa...er-is-locked-or-not-Guide?pid=654&mode=linear
So .short story.i have a nokia lumia 800 rm 801,and dosn't boot anymore.i wen't to a repair shop and the guy over there said that the bootloader needs to be reinstalled because it's bricked,but he can't do it)
this is what's i've tried: leaving for few hours to charger/usb cable,didn't worked.
if i connect it to pc for few seconds i see in control panel,nokia dload and it discconect it.
i can start recovery mode( that windows phone with the computer cable thing on my phone if i connect the phone to charger or usb and press camera volume up and power) but i can't start recovery mode without data cable/charger.
when i connect the phone to charger it vibrate(nothing on the screen shows)if i press the power button for half a second i see the t-mobile logo.and keeps apearing and vibrating random times i guess i didn't counted exactly.(restart loop or something)
when i connect the phone to usb it vibrates long,and keep connecting to pc and discconecting.
when it's not connected to charger or usb,don't give any sparkle of life(no vibrating,powering on,nothing)
any help please?if anyone would be that kind to help me ,or give me enough advices to fix it by myself...
bump
noxified said:
bump
Click to expand...
Click to collapse
Ok, you also contacted me by pm and I'm trying to help you, but I don't have a Lumia 800 so I don't know all the difference between a Lumia 710 and a Lumia 800.
So in short, before I unlocked my phone I had a similar issue then which you are dealing now, what I did is disconnect the phone from the pc and pressed the camerabutton and keep it pressed, on the same time I pressed the on/off button once but keep holding the camerabutton, the phone shows the recovery mode, so I connected the phone with zune and reinstalled my backup, that's it.
(It's not neccesary to dis- and reconnect, but I only tell you the way I did it.)
If that doesn't work I think you must read this thread from bypx,
http://forum.xda-developers.com/showthread.php?t=1457341
Succesz,
and if i don't have the backup? cant i just use someone else's backup?(for nokia lumia 800 rm-801 ofcourse)
on that guide i don't have dead usb flasing...
and without dead phone usb flasing i get this error:
ERROR: OSBL reported an error! Code: 0x30022
and in linux if i connect it in recovery mode,it gives me this error:
unable to mount windows mobile error initializing camera: -105 Unknown model
and discconects automaticly from recovery mode,entering automaticly in that reboot loop.
i think that the bootloader it's faulty.
when i connecting the phone to zune i get this error: C101002E
And i don't have a backup for restoring...
Ok, I do some research and contact you asap
Greetz,
ok,i will wait.
bump
noxified said:
bump
Click to expand...
Click to collapse
stop bumping, pls. This won't speed up a solution!
if anyone has an idea, they will help you.
And i already told you via pm what i know.
i tought if i was bumping someone would see the topic ,who know how to do it.
ok,i have borrowed atf box.what's next?
noxified said:
i tought if i was bumping someone would see the topic ,who know how to do it.
ok,i have borrowed atf box.what's next?
Click to expand...
Click to collapse
If you think that you can do it by yourself, search the tutorial for unlock the phone with the ATF box. If not, do like me: go in a service center for phones, pay 13 euro, and in 30 minutes you go home with the phone done ok without any complications. I changed in service my bootloader from dload to qualcomm.
Sent from my HTC Desire HD
whiperhack said:
If you think that you can do it by yourself, search the tutorial for unlock the phone with the ATF box. If not, do like me: go in a service center for phones, pay 13 euro, and in 30 minutes you go home with the phone done ok without any complications. I changed in service my bootloader from dload to qualcomm.
Sent from my HTC Desire HD
Click to expand...
Click to collapse
I tryed at a service,money ain't a problem.The guy over there couldn't do it.
noxified said:
I tryed at a service,money ain't a problem.The guy over there couldn't do it.
Click to expand...
Click to collapse
Try on other service. IMO is a complicated procedure for an inexperienced guy.
Sent from my HTC Desire HD
i tried on 5 services...
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed
I can't for the life of me get adb to recognize my max. It's Verizon, H-boot 2.46. Trying to root and unlock. I've tried everything here....nothing. A little help please.
Only thing I can suggest, because it's happened to me, is to make sure you have the correct, most current device drivers loaded on your PC.
Sent from my HTC6525LVW using Tapatalk
they are correct up to date and most current.
HellRayzer said:
I can't for the life of me get adb to recognize my max. It's Verizon, H-boot 2.46. Trying to root and unlock. I've tried everything here....nothing. A little help please.
Click to expand...
Click to collapse
Are you unlocked, s-off, and rooted? Do you have developer options activated on your phone? Please explain what you´ve done up till now.
What happens when you type adb reboot. Does it start and not find it or come back with command not recognized?
Sent from my HTC6525LVW using xda app-developers app
i was having issues myself. then I found this thread and things worked again. http://forum.xda-developers.com/showthread.php?t=2588979
it doesn't find anything. I haven't been able to root s-off or anything because adb cant find my device. Do I need adb files in rumrunner folder on C drive to make it recognize it and work or what the hell am I doing wrong? I have rooted and s-offed every htc device I have ever owned...this one isn't working out. It's showing as a portable media player not android device. In the past I remember when I connected the usb I had the option to select media storage or connect as android.
HellRayzer said:
it doesn't find anything. I haven't been able to root s-off or anything because adb cant find my device. Do I need adb files in rumrunner folder on C drive to make it recognize it and work or what the hell am I doing wrong? I have rooted and s-offed every htc device I have ever owned...this one isn't working out. It's showing as a portable media player not android device. In the past I remember when I connected the usb I had the option to select media storage or connect as android.
Click to expand...
Click to collapse
my rumrunner folder was still in my downloads folder no where near my adb files and everything worked ok for me. also my Max shows up as a media device also but adb/fastboot still working fine. did you try to reinstall your adb with the link I provided in the above post, its the only thing that helped me when I was having pretty much the same problem as you.
you may also need to unlocked dev tools in your settings... have you done that yet
Where and how do you unlock developer tools...haven't found that under anything in the settings?
HellRayzer said:
Where and how do you unlock developer tools...haven't found that under anything in the settings?
Click to expand...
Click to collapse
Enter Settings, then scroll down to about... pick "Software Information" -- then "More" --- Then press the "Build" 8 times fast. You´ll then have access to the developer tools.
Well thanks for the help. still can't get anything to work, guess this will be the first device I've owned that will never be rooted unless I find something that tells me what to put where and what to do.
HellRayzer said:
Well thanks for the help. still can't get anything to work, guess this will be the first device I've owned that will never be rooted unless I find something that tells me what to put where and what to do.
Click to expand...
Click to collapse
When you type in adb devices, can you see your seriel number?
RayHeath said:
When you type in adb devices, can you see your seriel number?
Click to expand...
Click to collapse
no. it says list of devices, then it's blank.
HellRayzer said:
no. it says list of devices, then it's blank.
Click to expand...
Click to collapse
Ok, I´m not sure what you time zone is, but I can help you tomorrow. It´s 10pm here right now, and I´m gonna hit the hay soon. When you´re online tomorrow, pm me. I´ll log in, and we´ll start.
Hey relax bud, do me a favor and PM and I will help you out with everything and getting your phone to be recognized by dab and fast boot and make sure you properly s-off unlock and root if that's what you are trying to accomplish! Hit me up, I have nothing going on tonight so I can jump right in to it with you right away
HellRayzer said:
no. it says list of devices, then it's blank.
Click to expand...
Click to collapse
Have Win XP or server 2003?!?
This: http://forum.xda-developers.com/showthread.php?p=49045175
Don't know if you guys ever got this issue solved or not. I'm having the same issue S-on, cannot get adb devices command to recognize my t6spr for the life of me. on Hboot 2.46, it will detect the USB device malfunction if I put the device in fastboot mode, but thats about it. Device manager shows Unknown USB (Device Descriptor Request Failed). Tried the KB update for devices that fail enumeration on Windows 8.1 for x64 but the update package said my system is not affected so that never installed. Tried the alternative miniadb pakage previously mentioned but didnt seem to have an affect installing fastboot, adb, and drivers, across the system universally. Just not having any luck apparently. I guess I could just sell the phone Tampered and Unlocked haha with no fingerprint scanner functionality, flash ViperRom or some other stock look alike ROM. Was just really hoping to go back completely stock. At one point it time I was trying different PCs to see if it was just a system issue for me. Occasionally it seemed like if I let it sit in Fastboot AC it would eventually get detected and flip over to Fastboot USB long enough for me to push a couple commands to the phone. I have the right RUU but it dosent do me any good if the computer cant see the phone haha. Now no computer seems to recognize it. It all seemed to happen after I tried to S-Off the device with Firewater's method. Idk if I bricked something because it never worked or changed a CID or some other ID to where the USB isnt recognizable, but all I can get this phone to do is take an electric current from the USB, lol thats about it. I thought I had it fixed enough to where I knew what to do if i absolutely needed to get fastboot to recognize the phone but now, nothing.
Just a curiousity question here....a bad usb cable can produce this also...read through posts didnt see anyone trying a new cable...
hey guys new to this place, not that new, i've always search this forum for some rom or how to fix stuff and other help but never post anything here.
so lets get straight to the point. so basically i want to revive my old samsung galaxy tab 10.1. you know, for fun and nostalgia haha (if possible). so i don't really remember what i did to this tablet that it becomes like what it is today. cannot be turned on, no display when charging, no nothing. i do remember rooting it before. when it charge, there is a little warm going on on the tablet but nothing happen. when i connect it to my pc, it recognize it as unknown device the first time, and then i hold the power button for couple of second and my pc recognize it again but now as apx but no driver available. so i made a little research just now and i found that the tablet may have a chance to be fix with the use of nvflash or something. so all im saying is it really my tab can be fix without spending money? if can how do i do it? i have a little experience about flashing rom and recovery. but nothing on how to use nvflash. i do really appreciate your help to bring me back this tab that meant so much for me and my family back in the days.
http://www.gsmforum.ru/threads/223383-Samsung-GT-P7500-%D0%BE%D0%BF%D1%80%D0%B5%D0%B4%D0%B5%D0%BB%D1%8F%D0%B5%D1%82%D1%81%D1%8F-%D0%BA%D0%B0%D0%BA-APX
you download this files...let me know if you fix your tab
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
yes, i can't upload this files...there's a error! did you downloaded 3 files and runned the process? the user doesn't write after the process but i think problem fixed. Ask you with topic when you registe youself...
jackfiq said:
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
Click to expand...
Click to collapse
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
bollicine said:
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
Click to expand...
Click to collapse
can you guide me on how to do it? from start till end. thank you soo much for helping me out
jackfiq said:
can you guide me on how to do it? from start till end. thank you soo much for helping me out
Click to expand...
Click to collapse
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
https://forum.xda-developers.com/showthread.php?t=1130574]
bollicine said:
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
Click to expand...
Click to collapse
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
jackfiq said:
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
Click to expand...
Click to collapse
you install the driver for to use nvflash...read this guide to install the driver https://forum.xda-developers.com/showthread.php?t=1130574]
but to use file.batch 1th recovery_P75xx.bat of Recovery_P75xx_110710_RemoveUsbDriver.zip to run the nvflash and the recovery and you post the result. bye
I think your battery is complet down, that means the current is under the charging level.
bierma32 said:
I think your battery is complet down, that means the current is under the charging level.
Click to expand...
Click to collapse
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
jackfiq said:
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
Click to expand...
Click to collapse
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
bollicine said:
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
Click to expand...
Click to collapse
hello again. sorry for didnt post any update . im actually really busy with studies and i already told that my university is far from my home. so i didnt get a chance to get back here until a month. now im here exicted to the thing only then come out with this type of output
Recovery the bootloader...
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
so i've made a little research.. so it seems that my device's bootloader is locked. so is there anyway to unlock my bootloader??
by the way im really sorry i didnt update for a long time. but i hope you still want to keep in touch with me to solve my problem. much thanks!