I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed
Related
I have a problem with Galaxy s2. Basically it started to drain my battery like hell.
It gets empty in about 10 hours.
Now when I want to flash the phone once again in order to get everything back as it was when I bought it I cannot. This is due to MTP connection activating itself as soon as I turn on the phone. And I cannot enable usb debugging due to that as it says that I have to remove the USB cable.
In addition my phone charges itself really fast about 2 hours. And when I try to power it on without charger plugged in it gives me charging image and yellow triangle with ! in it and thermometer aside flickering. Does anyone have any ideas how to fix my phone?
Have you tried using CWM to wipe all data + clear all cache, then do a fresh re-install?
Yes I tried it now. It still says my USB is connected when its not. And now it doesnt unlock my sim card.
Factory reset that dont work return phone to a service centre ..
jje
Well thats the case I have voided warranty already. Wondering if there are any chances I could put old rom back before returning it?
Make a DIY USB JIG then flash it back to stock rom and have it checked.
EarlZ said:
Make a DIY USB JIG then flash it back to stock rom and have it checked.
Click to expand...
Click to collapse
Not sure what do you mean by DIY USB JIG but I cannot flash it because I cannot switch USB debugging on... Thats the case it shows me that USB is always connected when it isnt and when USB is connected it doesnt let to switch on USB debugging.
Route is source stock rom and Odin load stock rom into Odin enter download mode on phone and then connect cable and flash rom .
No download mode
http://forum.xda-developers.com/showthread.php?t=819551
jje
JJEgan said:
Route is source stock rom and Odin load stock rom into Odin enter download mode on phone and then connect cable and flash rom .
No download mode
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
Thank you all who have replied. I have now managed to get over the USB issue somehow but still something is wrong either with battery sensor or battery. When I power off my phone it switches on automatically and shows the thermometer and battery charge icon. Anyone else have had this problem? It also charges up to 95% and it bursts to 100% very quickly.
EDIT: Now I tried my friends battery and I did not get the flickering temp error and my friend didnt get it with my battery as well. So something now I'm totally out of ideas.
Service centre .
jje
I am having the same issues here, wonder if the topic creator resolved this in any way? I am thinking of getting a new battery?
Just FYI wear a condom or something on your galaxy S II. As it turns out from service my phone supposedly has liquid damage which does not the warranty apply. I have to pay 240 euros in order to get it fixed :S
Hey Guys.
I had an S1 7 months prior to buying the S2, and have upgraded/fresh installed ROMS many many times over the past year. Once the S1 bricked during an upgrade and I was able to get it into Download Mode without using a micro-USB jig from instructions on this website. If my memory serves me correctly, it was a procedure something fairly simple like hold the Home, Volume Up and Power buttons continuously until the phone goes into forced Download Mode.
However, this procedure doesn't work with the S2 or I'm remembering it incorrectly, and I'm unable to find that instruction webpage again. Now my S2 is almost bricked showing a message I've not seen before, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So far, I cannot get past this message and Kies 2.0.2.11071_128 doesn't recognize the device nor that emergency recovery is needed.
Unfortunately Samsung programmers haven't been quite smart enough or forward thinking enough to make Kies work from behind a proxy which requires authentication (I live and work on a university campus and the only way to the internet is via proxy and authentication) and it has never shown in the past 9 months of usage that it needs to update itself nor finds any official ROM releases. Therefore I've been forced to use Odin and ROMs from here or samfirmware.com for my updates. Until now, there has never been any major problems that I couldn't get around.
Do any of you have instructions on how I can get my S2 into download mode so as to get Odin to recognize the device? It is not possible for me to make my own JIG here in Thailand as there is nowhere for me to go purchase electronic equipment and parts such as soldering irons and resistors. I am a computer engineer and could easily build such if it were possible to get needed parts.
Thanks hugely in advance for any help offered.
Just order a high from ebay
Sent from my GT-I9100 using XDA Premium App
cmcole101 said:
Hey Guys.
I had an S1 7 months prior to buying the S2, and have upgraded/fresh installed ROMS many many times over the past year. Once the S1 bricked during an upgrade and I was able to get it into Download Mode without using a micro-USB jig from instructions on this website. If my memory serves me correctly, it was a procedure something fairly simple like hold the Home, Volume Up and Power buttons continuously until the phone goes into forced Download Mode.
However, this procedure doesn't work with the S2 or I'm remembering it incorrectly, and I'm unable to find that instruction webpage again. Now my S2 is almost bricked showing a message I've not seen before, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So far, I cannot get past this message and Kies 2.0.2.11071_128 doesn't recognize the device nor that emergency recovery is needed.
Unfortunately Samsung programmers haven't been quite smart enough or forward thinking enough to make Kies work from behind a proxy which requires authentication (I live and work on a university campus and the only way to the internet is via proxy and authentication) and it has never shown in the past 9 months of usage that it needs to update itself nor finds any official ROM releases. Therefore I've been forced to use Odin and ROMs from here or samfirmware.com for my updates. Until now, there has never been any major problems that I couldn't get around.
Do any of you have instructions on how I can get my S2 into download mode so as to get Odin to recognize the device? It is not possible for me to make my own JIG here in Thailand as there is nowhere for me to go purchase electronic equipment and parts such as soldering irons and resistors. I am a computer engineer and could easily build such if it were possible to get needed parts.
Thanks hugely in advance for any help offered.
Click to expand...
Click to collapse
Well kiss my rosy red butt-cheeks! Speaking from personal experience as tech support, I know empirically to replicate something 52 times prior to asking for assistance. This instance shouldn't have been an exception!
Directly after posting this request for assistance, I decided to try Odin once again and DANGED if this time it found my device even with the "Firmware encountered" error showing. Odin stopped around 90% and forced me to reset my S2, but this time it went right into Download mode with nary a fuss. Now Odin just successfully installed KG6.
So if there is anything to be learned from this experience, either by other users with similar issues or myself, it is "if at 1st you don't succeed, try again and again and again and again."
So I was trying to root new Galaxy s2.. long story short, I think I hard bricked it.
The device won't power up; or at least the screen won't show anything.
I can't get to Download Mode.
Is there anyway I can save my new 400 dollar investment?
How are you trying to get into download mode ? Hold the volume down, home button and the power button at the same time. When you get the Samsung screen, release the power button but keep holding the volume down/home buttons until you get into download mode.
If you really can't get into download mode your options are:-
1) Get a jig. This would be your last chance to get into download mode before sending it off for repair.
2) Find someone near you who does JTAG repairs. This option will be cheaper than paying for Samsung to repair your phone.
3) Return the phone to Samsung. As you've tried to root the phone, there's a fair chance you'll end up paying for said repair as this voids your warranty. On the other hand you might be one of those people who get lucky and Samsung fixes your phone under warranty regardless. A roll of the dice essentially.
Edit - Remove your battery & leave it out for a minute or so before trying to get into download mode.
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Hehehehe ;-) Damn that brought back memories Uridium. I used to do that with Sega Mega Drive cartridges. However, I'm not sure we should be suggesting same on here. Not exactly ethical and bordering on fraud tbh
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Haha I will try the JIG method first.
But thanks for the devious idea ;]
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
johnnysyeah said:
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
Click to expand...
Click to collapse
MistahBungle said:
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
Click to expand...
Click to collapse
Thanks for your help! The JIG should arrive by Friday. Till then.. back to my iPhone 3G, yuck.
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
postfatal said:
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
Click to expand...
Click to collapse
Well, first I was using odin to root it by changing the kernel. But I think I was using the wrong version and then I got "firmware is wrong. Please select recovery mode in kies and try again."
Then I tried to put back 2.3.4 and that's where I think went wrong. I unplugged the phone because it was just stuck with Odin on for over 10 minutes.
Then now I can't even turn it on.
Sent from my ADR6400L using Tapatalk
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
postfatal said:
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
Click to expand...
Click to collapse
If the JIG is able to get it to go to download mode, would that mean for sure I can fix the phone?
And if the JIG cannot bring it to download mode, am I screwed with this phone?
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
RorixRebel said:
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
*crosses fingers* for the JIG then...
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Vivasanti said:
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Click to expand...
Click to collapse
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
I had problems with my sgs2 when i first got it and my problem was solved with a different usb cable. I was using a cheap usb cable and when i tried an original worked a treat.
Just a thought if ya get it yo power up again.
Sent from my GT-I9100 using XDA App
Unbrick without Jig
johnnysyeah said:
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
Click to expand...
Click to collapse
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
sumitpathak said:
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
Click to expand...
Click to collapse
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
Sent from my ADR6400L using Tapatalk
johnnysyeah said:
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
I dont really understand this as download mode requires Vol Down + Home + Pwr
Vol up is for recovery .
jje
Click to expand...
Click to collapse
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive
suzuki2004 said:
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive
Click to expand...
Click to collapse
You'd better read BEFORE flashing something... now you have to read A LOT for the finding a solution.
Are you sure your battery is charged enough?? Cause you said 'since a month'
Maybe it's bricked for ever...
My battery is full.
suzuki2004 said:
My battery is full.
Click to expand...
Click to collapse
Ok, have you got KIES and ODIN on your PC? So your device can be recognized by odin. Then flash a stock rom from the forum ... Read How To flash with ODIN. (not the mobile version)
I have KIES and ODIN but when I connect my device to PC .. ODIN cannot recognize it.
suzuki2004 said:
I have KIES and ODIN but when I connect my device to PC .. ODIN cannot recognize it.
Click to expand...
Click to collapse
Make sure KIES is not running at the back and that the Samsung USB driver is installed. Maybe delete KIES, install again but not updating KIES. Restart PC, fire up odin and put your phone to usb ... wait if you see the ID:COM turns yellow. If so, you can flash again.
Can you be more specific..your phone can enter in download mode?
Did you try on other computer to check ondin/kies connectivity?
Odia (all credits goes to him) wrote on another semi bricked phone this:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
(PS. is on a pc with widowsn7)
hope that it will help you to recover ur device.
Best regards
Ur options r:-
if phone can enter download mode then use odin to flash correct rom
If it doesnt work then pull out the battery connect phone to charger ...hold buttons for entering download mode and while holding the buttons put the battery in
If this doesnt work buy a usb jig and then while u have the battery pulled out put in the jig and then put in the battery and see if it enters download mode
If none of these things work then my friend ur phone is completely hard bricked
Ur only options r to go to samsung guys n get it repaired there...if they give u crap about losing ur warranty coz u flashed a custom rom then its better to go for jtag repair as that will be cheaper than the amount samsung guys r gonna ask for repair
Sent from my GT-I9100 using Tapatalk
Thank you very much fatjivi. You solved my problem. My device is alive now
I followed your second "if" .. I pulled out the battery . held the buttons for entering the download mode and while holding the buttons I put the battery back
Thanx also to ITRC & hhhans1 who tried their best in resolving my issue.
I really appreciate it guys
glad to have it back alive...SGS2 is such a great device,...almost cannot be bricked....from this samsung did a great job..
suzuki2004 said:
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive
Click to expand...
Click to collapse
what a tragedy
i've tried to install a firmware with odin and after it said passed the phone was with "downloading" screen and it turned off,and it didn't start,now i can't get it to "downloading" screen,windows doesn't recognize it,at all,no reaction no matter what i do.any sugestions?pls
synco22 said:
i've tried to install a firmware with odin and after it said passed the phone was with "downloading" screen and it turned off,and it didn't start,now i can't get it to "downloading" screen,windows doesn't recognize it,at all,no reaction no matter what i do.any sugestions?pls
Click to expand...
Click to collapse
What frimware did you flash!!??. ..... Did you try usb jig!!!?? If that doesn't work your last hope is samsung service!!
Sent from my GT-I5500 using Tapatalk 2
hello,thanks for the response,i don't know what usb jig is.i don't remeber the rom that i tried to put but i know it was android 2.3.7
Calm, which tutorial you followed exactly? Probably you are not right with the recovery or the root on the unit. If he is still going into download mode, we can still rescue it. Post at which point you are.
the phone is not starting at all,i don't see it in device manager
I have the exact same problem!
When i connect it to pc nothing happens, no charging battery, the device manager doesn't recognize it either, if i try to open it with the power button nothing happens and i also tried to pull out the battery and insert it but again nothing happens.
I think our last hope it to sent it to sumsung repair store.
Btw how much they may charge for this kind of "brick" without warranty?
dvpereira said:
Calm, which tutorial you followed exactly? Probably you are not right with the recovery or the root on the unit. If he is still going into download mode, we can still rescue it. Post at which point you are.
Click to expand...
Click to collapse
Sure hope you still visit the forum because I'm up the creek without a paddle.
I followed this tut here: http://forum.xda-developers.com/showthread.php?t=1416190 and everything worked great but it would seem that there is no baseband for the "Canadian" I5500MUGJJ7. I'm stuck in a loop and yes I can get into the download mode.
It should be noted at the start of the excellent tutorial that one would be unable to suceed if upgrading a Canadian G5.
Can you please help. Thanks
WapGiovan said:
Sure hope you still visit the forum because I'm up the creek without a paddle.
I followed this tut here: http://forum.xda-developers.com/showthread.php?t=1416190 and everything worked great but it would seem that there is no baseband for the "Canadian" I5500MUGJJ7. I'm stuck in a loop and yes I can get into the download mode.
It should be noted at the start of the excellent tutorial that one would be unable to suceed if upgrading a Canadian G5.
Can you please help. Thanks
Click to expand...
Click to collapse
try to flash with another baseband, im use 15500bvjjp9 and works fine,
I installed cm10.1, I worked for two days, last night my battery ran out this morning, I put it to charge and still nothing, not even charging via USB or a charger. What should I do?
Iwanche said:
I installed cm10.1, I worked for two days, last night my battery ran out this morning, I put it to charge and still nothing, not even charging via USB or a charger. What should I do?
Click to expand...
Click to collapse
I have the very same thing. I can get to the downloading screen (vol down, center, power) but can't get to recovery using odin and revovery clockwork. It stops at '<1> recovery.img download..' Anyone have any ideas?
I followed the instructions provided at the MEGA UNBRICK something thread situated here http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108/
Anyway, when I hold the volume-up button for 10 seconds, followed by plugging the Onyx with the PC, the system does't detect the device. What can I do now? And is there any alternative method to unbrick a hardbricked phone? I urgently need help
If you installed the drivers and the computer is not reckognizing the device, that's bad news. How did you manage to accomplish that?
aredpanda said:
If you installed the drivers and the computer is nota reckognizing the device, that's bad news. How did you manage to accomplish that?
Click to expand...
Click to collapse
I don't know. And ijust in case if you were being sarcastic, I used the same computer to replace the recovery of this phone.
Im not being sarcastic. The problem with the Android modding scene is that people got too used to blindly following steps without really knowing how they are affecting their devices. In order to get better chances at getting help, you'll need to describe what and exactly how you were altering your phone.
aredpanda said:
Im not being sarcastic. The problem with the Android modding scene is that people got too used to blindly following steps without really knowing how they are affecting their devices. In order to get better chances at getting help, you'll need to describe what and exactly how you were altering your phone.
Click to expand...
Click to collapse
I was using Bliss ROM with BluSpark kernel. Anyway, I downloaded 2 ROMS today, Sailfish OS and the stock H2OS for OPX. I wiped the phone and first flashed the Sailfish OS, but the phone was stuck in a bootloop which only was showing the oneplus logo and the text "Powered by Anrdoid". After that, I entered recovery, and did the normal pre-flash wipe again. This time I flashed the H2OS, but after I gave "Reboot to System", my phone just wont do nor display anything. Hardbricked, dead
Can you boot it into recovery? Your bat may be dead from extensively flashing stuff, so plug the phone to the power cable and press and hold VolDown+Power for some good 30s, then you can conclude your phone wont boot into recovery and maybe need an unbrick.
aredpanda said:
Can you boot it into recovery? Your bat may be dead from extensively flashing stuff, so plug the phone to the power cable and press and hold VolDown+Power for some good 30s, then you can conclude your phone wont boot into recovery and maybe need an unbrick.
Click to expand...
Click to collapse
Yeah, it didn't boot into recovery
Does the led light up when you plug the phone to the wall? If it does let it charge for an hour before attempting anything else.
After that and before trying anything else, make sure driver signature check is off and test mode is on. This varies slightly for Windows 7/8 vs 8.1/10. Which version are you running?
aredpanda said:
Does the led light up when you plug the phone to the wall? If it does let it charge for an hour before attempting anything else.
After that and before trying anything else, make sure driver signature check is off and test mode is on. This varies slightly for Windows 7/8 vs 8.1/10. Which version are you running?
Click to expand...
Click to collapse
No, it doesn't
aredpanda said:
Does the led light up when you plug the phone to the wall? If it does let it charge for an hour before attempting anything else.
After that and before trying anything else, make sure driver signature check is off and test mode is on. This varies slightly for Windows 7/8 vs 8.1/10. Which version are you running?
Click to expand...
Click to collapse
I turned off the signature check, W8
If your led doesnt light when your phone is plugged to the wall, this is behind the hard unbricking procedure and your phone is indeed, dead.
Sent from my ONE E1003 using Tapatalk
This issue has been resolved via PM,
Can a mod please close this thread?
No idea what it could be besides corrupt firmware which I've never heard of happening before. The Qualcomm utility should work just fine. Leave it plugged in for an hour or two and see if anything happens
Did you install the qualcomm drivers? If not do it again carefully with driver enforcement off. It works like a charm. Have bricked my device twice as of now and it worked.