So I was trying to root new Galaxy s2.. long story short, I think I hard bricked it.
The device won't power up; or at least the screen won't show anything.
I can't get to Download Mode.
Is there anyway I can save my new 400 dollar investment?
How are you trying to get into download mode ? Hold the volume down, home button and the power button at the same time. When you get the Samsung screen, release the power button but keep holding the volume down/home buttons until you get into download mode.
If you really can't get into download mode your options are:-
1) Get a jig. This would be your last chance to get into download mode before sending it off for repair.
2) Find someone near you who does JTAG repairs. This option will be cheaper than paying for Samsung to repair your phone.
3) Return the phone to Samsung. As you've tried to root the phone, there's a fair chance you'll end up paying for said repair as this voids your warranty. On the other hand you might be one of those people who get lucky and Samsung fixes your phone under warranty regardless. A roll of the dice essentially.
Edit - Remove your battery & leave it out for a minute or so before trying to get into download mode.
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Hehehehe ;-) Damn that brought back memories Uridium. I used to do that with Sega Mega Drive cartridges. However, I'm not sure we should be suggesting same on here. Not exactly ethical and bordering on fraud tbh
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Haha I will try the JIG method first.
But thanks for the devious idea ;]
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
johnnysyeah said:
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
Click to expand...
Click to collapse
MistahBungle said:
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
Click to expand...
Click to collapse
Thanks for your help! The JIG should arrive by Friday. Till then.. back to my iPhone 3G, yuck.
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
postfatal said:
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
Click to expand...
Click to collapse
Well, first I was using odin to root it by changing the kernel. But I think I was using the wrong version and then I got "firmware is wrong. Please select recovery mode in kies and try again."
Then I tried to put back 2.3.4 and that's where I think went wrong. I unplugged the phone because it was just stuck with Odin on for over 10 minutes.
Then now I can't even turn it on.
Sent from my ADR6400L using Tapatalk
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
postfatal said:
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
Click to expand...
Click to collapse
If the JIG is able to get it to go to download mode, would that mean for sure I can fix the phone?
And if the JIG cannot bring it to download mode, am I screwed with this phone?
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
RorixRebel said:
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
*crosses fingers* for the JIG then...
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Vivasanti said:
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Click to expand...
Click to collapse
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
I had problems with my sgs2 when i first got it and my problem was solved with a different usb cable. I was using a cheap usb cable and when i tried an original worked a treat.
Just a thought if ya get it yo power up again.
Sent from my GT-I9100 using XDA App
Unbrick without Jig
johnnysyeah said:
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
Click to expand...
Click to collapse
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
sumitpathak said:
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
Click to expand...
Click to collapse
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
Sent from my ADR6400L using Tapatalk
johnnysyeah said:
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
I dont really understand this as download mode requires Vol Down + Home + Pwr
Vol up is for recovery .
jje
Click to expand...
Click to collapse
Related
My phone is 100% bricked, I was flashing blitzkrieg bootloader to flash his ROM and something went wrong.
Now my phone wont turn on, wont nothing. . .
So the Question is: has anyone went out of this? I now the jig method, but I searched and didnt find anything.
eif you borked the bootloader there is a good chance there isnt much you can do besides a jtag reset, now a jig wouldnt hurt to try but i wouldln't count on it working. i personally will always stay away from bootloaders until i get my own jtag rig.
Goodluck bro hopefully the jig works.
if the vibrant is originally yours you could make a warranty claim with samsung stating you were attempting to flash 2.2 through keis and your phone wont work now, otherwise like said jig maybe, Jtag almost assuredly, will fix your phone.
If you are actually considering a JTAGing, search in the forum for connexion2005. He have lots of experience doing it and have a website and everything.
Its sad, but you remembered me why i shouldn't mess with the bootloader. Goodluck with your phone bro...
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
anthonys2r said:
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
Click to expand...
Click to collapse
I do not why (dont ask) I added the stock .pit file! ... i think there was the error...
anthonys2r said:
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
Click to expand...
Click to collapse
I am actually considering a Jtag, but I'm in México so I had to find someone who does that here. . . actually only found 2 people lol
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
shreddintyres said:
eif you borked the bootloader there is a good chance there isnt much you can do besides a jtag reset, now a jig wouldnt hurt to try but i wouldln't count on it working. i personally will always stay away from bootloaders until i get my own jtag rig.
Goodluck bro hopefully the jig works.
if the vibrant is originally yours you could make a warranty claim with samsung stating you were attempting to flash 2.2 through keis and your phone wont work now, otherwise like said jig maybe, Jtag almost assuredly, will fix your phone.
Click to expand...
Click to collapse
I couldn't agree more with everything in this post. Nice community situation here
- The Samsung Kies killed my phone excuse has gotta be the ultimate life saver, but over time I'm starting to agree with others that it's probably not something I should endorse. As I root more and more of my friends devices I'm starting to find that 1) I hate them. and 2) NOBODY will read an OP all the way through!
kawika said:
As I root more and more of my friends devices I'm starting to find that 1) I hate them. and 2) NOBODY will read an OP all the way through!
Click to expand...
Click to collapse
I thought i was the only one who felt that way about my friends!! Really how hard is it to read a op!
kawika said:
I couldn't agree more with everything in this post. Nice community situation here
- The Samsung Kies killed my phone excuse has gotta be the ultimate life saver, but over time I'm starting to agree with others that it's probably not something I should endorse.
Click to expand...
Click to collapse
I wholly agree with you that this method is something that should be avoided if at all possible, however I know jtag services can be hard to find as well as sometimes quite costly.
@op let us know how it all turns out for you
-Cheers
Sent from my SGH-T959 using XDA Premium App
Your battery probably died.
You dont have to flash a pit with it because it uses the phones native pit when flashing the bootloader.
Also, the OP for the gb Bootloader states that it CHANGES the key mapping. volume up and power gets you dl mode. Try that before jtag. I had this problem trying to flash the rom because i couldnt figure out recovery. Turns out I didn't read it right. I read it through, just didn't interpret it correctly.
PabxH said:
My phone is 100% bricked, I was flashing blitzkrieg bootloader to flash his ROM and something went wrong.
Now my phone wont turn on, wont nothing. . .
So the Question is: has anyone went out of this? I now the jig method, but I searched and didnt find anything.
Click to expand...
Click to collapse
As mentioned I'm able to JTAG your phone back to life as well as any other bricked Vibrants. PM me if you need any help with this...
plug usb cable and press vol up+vol down.. then use odin.. samsung phones are never bricked..
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
omg thank you for that i thought my phone was BRICKED and hten i was soo sad so i was looking through hte post andd i saw ^^^that one and i thought it wont hurt to try one last time so i did and it worked
very unfortunate to tell u i m also suffering same problem and dont hav idea abt jtag.. plz let me know i know abt odin cwm kies update processes will used them b4.. but watz jtag
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
Thank You so much. I was trying to flash back to stock using odin and forgot to put in the pda file. I was only using pit and it bricked. No download mode, left it off for hours, pure blackness. Until I tried your method of plugging in the usb and holding the volume buttons then plugging in the battery. Thank you.
Fazeh said:
Thank You so much. I was trying to flash back to stock using odin and forgot to put in the pda file. I was only using pit and it bricked. No download mode, left it off for hours, pure blackness. Until I tried your method of plugging in the usb and holding the volume buttons then plugging in the battery. Thank you.
Click to expand...
Click to collapse
Great news and nice tip from the OP. However, if that tip works, you were not fully hard bricked...
Ok, last update: I got it repaired!
JTAG was the only solution for this.
My phone was:
DEAD, NO SCREEN BOOT UP NO NOTHING
NO REACTIONS AT ALL
NO BATTERY CHARGING IMAGE
NO NOTHING!!! JUST A TOTAL BRICK.
Thank you all!!
Glad to hear you got it sorted out be careful flashing those boot loaders
Sent from my SGH-T959 using XDA Premium App
bricked my phone vibrant
I faced the same issue when my phone got bricked.
1. odin back to jfd
2. GB bootloader installed.
3. updated to 2.2 froyo via kies...
after that the phone never turned onn...BRICKED...
sending it to connection2005 for JTAG...
hope that resolves the issue.
Hello Guys!
My friend bought a SGS2 and he whanted to root it and to put MiUi on it. Now he unpluged it while it was in the Odin doing something with PIT...
It stopped and now he can't go anymore in the download mode and the phone remains black...
is that a full brick? is there any chance to run it again?
do you need more informations?
I looked throuth the threds but i couldnt find something like that...
i hope anyone can help
Will Samsung repair that with Warranty?
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
BlackRainX said:
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
Click to expand...
Click to collapse
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Oli28 said:
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Click to expand...
Click to collapse
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
achillies400 said:
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
Click to expand...
Click to collapse
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Oli28 said:
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Click to expand...
Click to collapse
It's not the most correct thing to do (actually, not at all, it was your friend's fault entirely, also voiding the warranty), but your friend can tell them that the device began to heat while charging, he unpluged it and it died, sometimes it happens...
As for the JTAG you asked on the other post, it's a physical connector inside the cellphone used to write the flash memory, it involves opening the device, pinning some terminals and programming via PC, it's pretty common on embedded devices to load the program for the first time.
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
pankajkundalia said:
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
Click to expand...
Click to collapse
Won't work if the PIT wasn't completed therefore leaving the device void of a bootloader, but it's worth the try, you have nothing to lose...
Wow, nice will try today... I will get the phone... would get a free Pizza if i would make it work again! thank you guys for your answers. I will tell you what happend...
is there a how ti for jtag? Could Be the solution...
Sent from my Desire HD RUNNY using XDA App
How to JTAG:
You had to solder stuff, it's safer to try warranty
Omega Frost said:
How to JTAG:
You had to solder stuff, it's safer to try warranty
Click to expand...
Click to collapse
Thank you!
suddenly this with the battery didnt worked so im gona send it to the warraty....
And when they dont repair it for free or less than 50 $ I have to send it to the JTAG..
thank you guys for all your support
Afaik u never supposed 2 use pit options in odin for gs2 otherwise u end up with a brick anyway regardless if u remove the cable or not. perhaps read more and be more careful if u ever decide 2 flash again. i would not be happy with that friend lol.
Sent from my GT-I9100 using xda premium
I have a GT-I9100M that is refusing to turn on. My computer cannot even tell when the phone is plugged into it.
I was following the guide located at
dropbox.com/s/6oiqm8909pwg6qt/For%20i9100G%20users%20only.pdf
to try to update my phone. I was using the Odin method with the 2 files linked under "using odin" on the first page of the guide.
Odin said something to the effect of "FAIL". I tried again, but ODIN got stuck, so after a while I unplugged my phone from the computer.
Now I cannot get a response from the phone at all. I have tried pressing power, holding vol.down+home+power, removing the battery. Even when I connect the phone to my computer, I get no response (My computer doesn't even recognize that the phone is plugged in).
Are there any steps that can be taken? Should I contact Samsung? I read something about a USB JIG... would one of those help? Is this a "hard brick"?
I am in Waterloo, Canada (it's near Toronto). If there are no other options, can anyone recommend a trusted repair service?
Thank you in advance and sorry if I am replicating an already existing thread! I searched and searched, but tbh I'm pretty worked up atm, so I may have missed it.
EDIT: On closer inspection, it seems the file I tried to upgrade with was for I9100G, whereas I have I9100M. I'm guessing this is the source of the problem?
GeneralVeers said:
I have a GT-I9100M that is refusing to turn on. My computer cannot even tell when the phone is plugged into it.
I was following the guide located at
dropbox.com/s/6oiqm8909pwg6qt/For%20i9100G%20users%20only.pdf
to try to update my phone. I was using the Odin method with the 2 files linked under "using odin" on the first page of the guide.
Odin said something to the effect of "FAIL". I tried again, but ODIN got stuck, so after a while I unplugged my phone from the computer.
Now I cannot get a response from the phone at all. I have tried pressing power, holding vol.down+home+power, removing the battery. Even when I connect the phone to my computer, I get no response (My computer doesn't even recognize that the phone is plugged in).
Are there any steps that can be taken? Should I contact Samsung? I read something about a USB JIG... would one of those help? Is this a "hard brick"?
I am in Waterloo, Canada (it's near Toronto). If there are no other options, can anyone recommend a trusted repair service?
Thank you in advance and sorry if I am replicating an already existing thread! I searched and searched, but tbh I'm pretty worked up atm, so I may have missed it.
EDIT: On closer inspection, it seems the file I tried to upgrade with was for I9100G, whereas I have I9100M. I'm guessing this is the source of the problem?
Click to expand...
Click to collapse
Yes that was the source of the problem ...
Do you see phone connected in ODIN.. That is COM section turning Yellow ???
No, Odin can't see the phone
Bottom line is, if you can't get into download mode (vol down/home/power), your next best (very faint) chance is a jig. If that fails, you'll need to have a JTAG repair done, or return it to your telco/Samsung for repair.
The JTAG repair may well turn out to be the cheaper option given there's a pretty good chance Samsung will charge you to repair it, as using non-stock firmware on the phone voids your warranty.
GeneralVeers said:
No, Odin can't see the phone
Click to expand...
Click to collapse
Hi
If odin can not see your phone means you are not in download mode.
also you can use "Download Mode JIG" to put your phone in download mode if its not bricked. you can buy online.
Also you can make it @ home if you know about how to.
GeneralVeers said:
No, Odin can't see the phone
Click to expand...
Click to collapse
Now That's a serious Problem...
As you have said you can not even go into download mode or Recovery mode
do what @MistahBungle has Said ...
USB Jig is your first Option.. If you have one ...
Okay, thank you for sharing your expertise!
Would anyone happen to know if this site mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
is reputable? $75 to get me out of this mess isn't toooo bad.
Also, any tips for approaching Samsung? I'd like to be honest with them, of course, but if there's a chance that they won't be able to tell what I've done, I might just say "it when dark when I tried to update it".
I'm with Rogers, but I bought the phone off Kijiji. I doubt they would help me...
Anyway, thanks again!
GeneralVeers said:
Okay, thank you for sharing your expertise!
Would anyone happen to know if this site mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
is reputable? $75 to get me out of this mess isn't toooo bad.
Also, any tips for approaching Samsung? I'd like to be honest with them, of course, but if there's a chance that they won't be able to tell what I've done, I might just say "it when dark when I tried to update it".
I'm with Rogers, but I bought the phone off Kijiji. I doubt they would help me...
Anyway, thanks again!
Click to expand...
Click to collapse
Listen if the phone is still under warranty you can try approaching the samaung service centre and tell them that the phone suddenly switched off while using and then refused to switch on..
Since the phone cant be booted even to the download mode, they wont be able to check the binary counter so..
They might fix it for you or maybe if you are lucky they may get you a replacement!
I had a similar problem and they fixed it for me..
KJS
long story short, samsung kies bricked my phone while doing an update to 2.3, so i need a hard reset through odin using DI01 package3 and 3/4 of the way through it failed and stopped working so i pulled the plug and now i cant even get into download mode to try it again because its stuck with the phone, triangle, computer, and i have a fascinate so i can only use the power and vol-/+ to get into download mode any ideas on where to go from here, or if you dont know maybe pass it on to someone who might know. thanks
What has always worked for me no matter what was taking the battery completely out...then with it still out, hold only the volume down key, and plug in the USB cord that is connected to your computer. It should go right into download mode in like 10 sec, then you may replace the battery back in before flashing anything
Let me know if it did or didn't work!
Sent from my SCH-I500 using XDA App
download mode
no still didnt work nothing happens when i just hold the vol- and plug in the usb thats hooked up to my computer. is it possible that the phone is entirely messed up, it was working fine before the attempted upgrade, and from what ive read the phone, triangle, computer is a soft brick from odin is that correct? do you know or anyone know how to go deeper into the phones software to over ride what is happening, but odin doesnt recognize my phone is there another way to get odin to see the phone? i dont know im stumped. thanks for the info
Cgwood said:
no still didnt work nothing happens when i just hold the vol- and plug in the usb thats hooked up to my computer. is it possible that the phone is entirely messed up, it was working fine before the attempted upgrade, and from what ive read the phone, triangle, computer is a soft brick from odin is that correct? do you know or anyone know how to go deeper into the phones software to over ride what is happening, but odin doesnt recognize my phone is there another way to get odin to see the phone? i dont know im stumped. thanks for the info
Click to expand...
Click to collapse
Yeah hmm thats probably not a good sign. From my understanding, odin and putting the phone into download mode was always the sure way to fix a bricked phone. Ive never heard of another way
do you happen to know how to wipe os and reinstall os?
No, by wiping os and reinstalling, i am pretty sure that odin is about as basic and the best "factory reset" you can do. After using odin the phone is basically the exact as if it came straight from verizon. I have not heard of any alternative programs to use - besides if you cant get into the download mode (with the big yellow triangle on the screen - then the phone is basically done for.
thanks Kadin, i appreciate all your knowledge and ill let you know if i figure out any way to fix it, thanks again ill tag you as a friend
Cgwood said:
thanks Kadin, i appreciate all your knowledge and ill let you know if i figure out any way to fix it, thanks again ill tag you as a friend
Click to expand...
Click to collapse
Actually there is another program called heimdall. It uses the same protocol as odin to interact with the phone. Give that a try, but if you cant get into download mode it might not do any good...either way there is another program other than odin to flash stuff on the fascinate.
Heimdall - check it out!
There is an unlockable mod, it requires some ripping apart and soldering.. Google it
Sent from my SCH-I500 using xda premium
So i need to send in my phone for repairs because my battery gets drained like crazy and i tried everything to stop it. (dozen different roms/kernels completely "naked" without ANY apps and it still drains ~10% an hour).
so anyway, my JIG worked fine all the time (got me into download mode every time), but since i need to reset the binary counter i flashed the XWKG1 firmware and the old bootloader through odin and everything works fine, except my JIG does not bring me into download mode anymore. when i plug it in, the phone just boots normally. i can get into download mode with 3 button method but it just shows me that the counter is still on 1.
any suggestions?
searching for this matter is kinda hard, because "jig not working" brings up all kinds of threads about the jig not resetting due to newer bootloader, and "jig not starting download mode" doesnt bring the desired results either.
so any help would be much appreciated.
greetz
strange!!!
Home made jig or purchased one? Sometime any short circuite on the jig resisters???
if available try with another jig...
you can flash again old bootloader and try.
purchased one. i already opened it up to check for short circuit, and the color coding of the resistor is correct aswell (301k)...
phoboss said:
purchased one. i already opened it up to check for short circuit, and the color coding of the resistor is correct aswell (301k)...
Click to expand...
Click to collapse
lol u sayin ur jig is not working????well wat u need it for download mode or resetin counter...
phoboss said:
So i need to send in my phone for repairs because my battery gets drained like crazy and i tried everything to stop it. (dozen different roms/kernels completely "naked" without ANY apps and it still drains ~10% an hour).
so anyway, my JIG worked fine all the time (got me into download mode every time), but since i need to reset the binary counter i flashed the XWKG1 firmware and the old bootloader through odin and everything works fine, except my JIG does not bring me into download mode anymore. when i plug it in, the phone just boots normally. i can get into download mode with 3 button method but it just shows me that the counter is still on 1.
any suggestions?
searching for this matter is kinda hard, because "jig not working" brings up all kinds of threads about the jig not resetting due to newer bootloader, and "jig not starting download mode" doesnt bring the desired results either.
so any help would be much appreciated.
greetz
Click to expand...
Click to collapse
If the jig is working properly then you should get to dl mode with old bootloader. You can get info regarding how to install it here http://forum.xda-developers.com/showthread.php?t=1075278 and here http://www.jayceooi.com/2011/12/23/...oader-on-samsung-galaxy-s2-to-enable-usb-jig/
rocky23 said:
lol u sayin ur jig is not working????well wat u need it for download mode or resetin counter...
Click to expand...
Click to collapse
thats exactly what i'm saying. i have the right firmware, and the right bootloader flashed, but when i plug in my JIG the phone boots normally. i can get into download mode with volume down+home+power but that way i cant reset my binary counter.
Logic says buy a new USB jig as the cost is so small .
jje
yeah already orded one. weird though that it stopped working from one minute to the next.
phoboss said:
yeah already orded one. weird though that it stopped working from one minute to the next.
Click to expand...
Click to collapse
do post if the new jig works.......cheeeeerz
same problem!
phoboss said:
yeah already orded one. weird though that it stopped working from one minute to the next.
Click to expand...
Click to collapse
any news?? i have the same problem. mine is home-made and sealed shut (bathed in hot-glue and visible below). one moment working (dwnload) the next: nope (nrml boot).
I'm a noob and I know it
Try noteiangle app. So perfect.
Sent from my GT-I9100 using XDA
Check if in Developer option / USB debugging is selected then power off the phone and use usb jig
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
deltasync said:
Check if in Developer option / USB debugging is selected then power off the phone and use usb jig
Click to expand...
Click to collapse
it is on mine. Still no go...
Sent from my GT-I9100 using XDA
dalelerah said:
it is on mine. Still no go...
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
debugging will not make any difference...
even if you keep posting, you dont get any suggestions other than below :
1) try your jig on any other phone
2) try with new jig
3) try flashing old bootloader again
Everythig fail, flash ICS and use Triangle Away app.
ZACQ8 said:
debugging will not make any difference...
even if you keep posting, you dont get any suggestions other than below :
1) try your jig on any other phone
2) try with new jig
3) try flashing old bootloader again
Everythig fail, flash ICS and use Triangle Away app.
Click to expand...
Click to collapse
Yeah I guess. Bootloader is not the problem, as it worked before. Plus, according to other threads, ICS bootloader works with jig, but it only force-boots to download, not flashing Odin counter. As stated, that doesn't even work.
I'm a noob and I know it