hi to every body
i install a program to my hero and when i reset my phone, my hero don't start and hang in htc logo
i try to install official rom but when i install it in installation i got error
ERROR[131] :CUSTOMER ID ERROR
PLEASE GET THE CORRECT ROM UPDATE UTILITY AND TRY AGAIN
i try install the rom from sdcart but after cheeking it i got error
CID incorrect!
update fail!
i don't no have to fix this problem
my hero doesn't root
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.14
Aug 4 2009,19:43:30
it sounds like your trying to install an ruu thats not the correct one for your phone. did you get this from htc? if so you need to know if your phone is for a specific carrier like orange t mobile etc. if its a generic hero you need ruu for that which will be none carrier specific. if your phone isnt responding to anything try holding power button and home to go into recovery mode and select wipe data factory reset hope this helps.
cokey77 said:
it sounds like your trying to install an ruu thats not the correct one for your phone. did you get this from htc? if so you need to know if your phone is for a specific carrier like orange t mobile etc. if its a generic hero you need ruu for that which will be none carrier specific. if your phone isnt responding to anything try holding power button and home to go into recovery mode and select wipe data factory reset hope this helps.
Click to expand...
Click to collapse
i download it from shipped-roms.com because i don't found any rom in htc
i thing my device is generic hero. is there any way to know this?
i try to holding power button and home but no menu display for my and i see this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when in this screen try pressing up on volume rocker then a menu should appear. go up and down menu with volume rocker and press power button to select your option. if this doesnt work try power and back button , keep holding back button and press power button once then options appear which should be<vol down> hboot mode and<menu> reset device this is the one you want so just press your menu key.to get out of this menu if you have any difficulty you will have to take battery out thats the only way i know how to get out of this screen without selecting an option that is.
p.s this is for if you press power and back, be carefull not to press volume rocker when it says hboot because another option will appear and if you accidently select option i think it could lock your sim so be carefull and good luck.
cokey77 said:
when in this screen try pressing up on volume rocker then a menu should appear. go up and down menu with volume rocker and press power button to select your option. if this doesnt work try power and back button , keep holding back button and press power button once then options appear which should be<vol down> hboot mode and<menu> reset device this is the one you want so just press your menu key.to get out of this menu if you have any difficulty you will have to take battery out thats the only way i know how to get out of this screen without selecting an option that is.
p.s this is for if you press power and back, be carefull not to press volume rocker when it says hboot because another option will appear and if you accidently select option i think it could lock your sim so be carefull and good luck.
Click to expand...
Click to collapse
i reset my device with HOME+BACK+POWER button and it work now
glad to hear your all good
Hi
Ive purchased Hero from a guy who said it was rooted. Super Permissions is installed and working, so I skipped the rooting section
When trying to enter in recovery mode by pressing Home + Power, my phone shows a black hero with red exclamation mark inside a triangle, I plug the phone with my PC but nothing happens .... thus I cant select "USB-MS toggle" in recovery mode and move forward to place the Custom ROM on my SD card in the main directory and proceed
You may find this info helpful
hero cvt ship s-on
Hboot-1.76.0007 (Hero13000)
Microp-010f
Radio-6.35.08.22
Please Help
you need rom manager app to apply custom recovery so you can flash roms etc but if you want to know how to get options up on recovery screen with red triangle press up on volume rocker
I was following the procedures as mentioned in this thread
http://forum.xda-developers.com/showthread.php?p=10818270#post10818270
Nothing happens when I press volume up or down
try pressing power button or volume and power button it should work
Ok, I got it
I have only 4 options in ths screen, it says:
Android System Restore (2e) (or something like that)
- Reboot
- System wipe
- Apply update.zip
- Wipe Cache
I did, system wipe, which restored all factory settings and then wipe cache
Then I went for Apply update.zip (i named the custom Rom to update.zip earlier), but in vain
It will be very kind of you if you explain where Im getting it wrong
I have clock work now, through the Rom Manager app downloaded from the market
I have flashed 2 roms in succession, Stock Froyo & Cyanogen mod 6.1, but both stuck on the splash screen
try this http://www.androidpolice.com/2010/0...d-phone-with-rom-manager-full-backup-restore/ when you have flashed a rom sometimes it takes a while to boot and can hang at splash screen for ages so give it a chance i have waited five mins or more before rom goes to start up screen
Thanx for the help buddy, my Hero was stuck on Boot Splash for an hour or so
I took out the battery, wiped my device again and flashed Cyanogen's 6.1, it took about 5 minutes in first startup but after that its silky!
Thanx again
Related
Hi,
Since yesterday my screen stays black,
when i want to turn it on nothing happens.
i thought it should be the battery but i can´t charge it.
when i plug on the power cable it give a red led light, but for a few seconds.
after that the led goes away and nothing happend.
can someone help me with what to do?
Jan
We need more info. Are you rooted, stock or custom rom, have you had the battery tested, installed any new apps? Any info might help
We're comin from a pure power source.
Did you underclock or overclock?
We're comin from a pure power source.
sorry a bit more information now,
I followed yesterday the steps from htcdev [dot] com
when i started the phone yesterday with volume down and power it says that its rooted.
i tried to install a custom rom, but the htc logo stays.
i have read the post and it says that it takes quit long to run for the first time. so i wait. ( i fell asleep )
the next morning my phone doenst go on.
Did you wipe everything before flashing the rom? Maybe a bad download. What recovery are you using?
We're comin from a pure power source.
yes i wiped everything i tried the lee rom or something... what you mean with recovery?
Clockwork recovery or twrp recovery
We're comin from a pure power source.
Is your firmware up to date for the rom? Is your phone cdma or gsm? Which version of the rom?
We're comin from a pure power source.
Me too!!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yea i understand, but how can i do a recovery if my screen doens't turn on?
You can't even boot into fastboot or recovery? No screen for those either?
We're comin from a pure power source.
No my phone doens't do anything since this morning.
it begins with the htc startup screen yesterday and now if i push the power button i dont get a response from my phone.
the only response is when i put the charger it displays the red indicator led for a few seconds but afther that i goes away and nothing happend.
You might need to use an ruu
We're comin from a pure power source.
how do i use an RUU? can you help me?
Find the right one, in the dev section in the stickies I think. Its a exe file you run through your pc
We're comin from a pure power source.
incarnez said:
Hi,
Since yesterday my screen stays black,
when i want to turn it on nothing happens.
i thought it should be the battery but i can´t charge it.
when i plug on the power cable it give a red led light, but for a few seconds.
after that the led goes away and nothing happend.
can someone help me with what to do?
Jan
Click to expand...
Click to collapse
You should not flash a rom directly from recovery.I guess you did it without fastboot method so it is staying at the htc logo screen (as the kernel from the new rom did not get written on the boot partition). And the battery is completely discharged now as you fell asleep on the htc logo screen, it sucked up all the battery.
Now try to boot into bootloader (using power+volume down) if it cant turn on , then you might have to charge your phones battery using a universal charger (like this http://www.youtube.com/watch?v=YKsxq8SeN3Q ). After a charging of few mins if still it doesnt boot , then you might have to use another battery.
After charging/changing ur battery
>boot ino bootloader by pressing ( vol down + power )
> select fastboot on phone and connect phone to PC(phone should say fastboot-USB)
> run command prompt and navigate to your fastboot folder in cmd (folder which you used while unlocking your bootloader.It should have some file like fastboot.exe, adb.exe etc)
> open up your ROM.zip using winRAR and copy the boot.img from the zip to your fastboot folder
>then in command prompt type "fastboot flash boot boot.img"
>then download this http://forum.xda-developers.com/attachment.php?attachmentid=803714&d=1322926029 and extract it to your fasboot folder
>then in command prompt type "fastboot flash recovery cwm.img"
>then type "fastboot boot cwm.img" then recovery should boot (You should also see the RED LED lit up in recovery mode.)
>Wipe everything
>Now in recovery select install zip from sdcard and flash the same ROM.zip from which you copied the boot.img.
Then reboot your phone it should work and should not stuck on the HTC logo screen.
HOPE THIS HELPS............
Thanks for the help,
i have striped a usb cable and started the phone with the red and black wire to the accu so it start charging.
now i run in the boot loader and do the steps you say,
when you say the phone start with the recovery it stays on the htc logo splash screen... again...
did i something wrong again?
incarnez said:
Thanks for the help,
i have striped a usb cable and started the phone with the red and black wire to the accu so it start charging.
now i run in the boot loader and do the steps you say,
when you say the phone start with the recovery it stays on the htc logo splash screen... again...
did i something wrong again?
Click to expand...
Click to collapse
Do you own or know the recovery name that worked that time when you intalled the ROM?
try using that instead of cwm.img then check if that 1 boots. Also type the name of the recovery in command prompt instead of typing cwm.img.
If that 1 also fails you will need to lock your bootloader and flash RUU. Then everything will be fine AFAIK. But only use RUU made for your phone.
Do you have sprint cdma evo 3d or rogers or any other?
i dont know where to find my version of HTC EVO 3D?
i come a bit further now and i can boot into the recovery modes and select a install from sd rule. when i select install from zip and select the zip on my sd card. it loads for a while and after a while it says. installation aborted. when i toggle singature verrification it give me the error verification failed.
what to do now?
Simple go into settings/power and turn fastboot off also see if there is an update available software wise
Sent From My Super Evo3d
Powered by HTC
XIAOMI Redmi Note 2 Hard Reset Fastboot Mode Recovery Mode Pattern Lock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
press and hold Volume Down + Power button at the same time for a couple of seconds.
on the screen select option Recovery, by using Volume Down to scroll and Volume Up to confirm.
When an Android Image displays on the screen press the Power button to enter Recovery Mode.
Press Volume Down to choose "wipe data/factory reset", and then push the Power button to confirm.
Select "Yes--delete all user data". Use Volume Down button to scroll and Power key to select.
"reboot system now".
say thanks if it works
source
This does not work, holding volume down + Power get's you to fastboot mode.
No sense just copy and pasting some crap from a completely different handset and just confusing people.
zan5hin said:
This does not work, holding volume down + Power get's you to fastboot mode.
No sense just copy and pasting some crap from a completely different handset and just confusing people.
Click to expand...
Click to collapse
maybe you pressed vol+up accidentally , anyway thanks for comment
Maube i actually own this handset and know how to press buttons.
zan5hin said:
Maube i actually own this handset and know how to press buttons.
Click to expand...
Click to collapse
For recovery press VOL+ and POWER button :good:
It's not VOL-
More simple
-choose update app
-three point in right corner
-reboot (recovery)
just press power, select reboot..while its rebooting(white circle progressing) press vol UP (vol+) until you see the MI logo...and wallah, you will be in recovery mode.....
...
Thanks a lot!
Power + Vol up. It's really work for me.
wasd- said:
For recovery press VOL+ and POWER button :good:
It's not VOL-
Click to expand...
Click to collapse
Wrong again!
You posted the same erroneous information on the 27th
Am I reviving a dead thread? Probably.
However, I just thought it would be worth saying that, in my case, pressing POWER + VOL UP (power first, followed by volume up) took me to the recently installed TWRP
I'm trying to ressuscitate my redmi note2 "prime" (whatever that means!...) and i begin to assume that one of the upgrades this "version" got is the recovery 2.01 which either with VOL+ ends in a menu were chinese variants and english are presented to choose and, after that choice shows 4 alternatives:
Reboot (into the old perverse, crippled system!) or i8nstal the update.zip and then produces a banner saying the file is CORRUPTED, so: BACK and then: Reboot or Power OFF and that's it!
Its not a question of volume up or down. It is a sarcastic form to deviate candidates to fly away
to freedom at last: to Cianogenmod! In my case: it is a way to convey the underlying message:
you bricked your rednote2? Fine! Live and learn -- now spare some money and buy another...
But if i am not able to ressuscitate it, instead of buy i'll bye, bye. Said.
HN
There are 2 different topics here;
a. If you want to enter Fastboot (ie to do Flash Update) mode Press Vol Down + Power
b. If you want to enter Recovery mode (ie to do Factory reset) Press Vol Up + Power
I hope this helps
Hey everyone , I ran into some trouble with my device and I thought this is the only place I could find a solution,
I was trying to root my samsung tab a (2019) (SM-T515) , but something went wrong after flashing twrp ( specially made for tab a ) and ever since my phone is stuck on the main "Samsung galaxy tab A secured by knox" screen with a yellow triangle symbol below it , it isn't being detected by my PC anymore either. This is what I did in steps:
1)Unlock OEM
2)Go in download mode and flash twrp , it said "pass" and I had auto-reboot off , so I rebooted and got stuck here.
I have tried the power button , it doesn't do anything , also the volume up + power key (recovery mode) doesn't do anything either.
Also I tried the volume down + power button , it restarts the phone and puts it back to the same screen after this message ( see attached imgs ).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^ stuck on this
Would a USB Jig work in this case?
Hold Power + Vol Down for 7 seconds, then immediate switch to Power + Vol Up to enter TWRP. If that doesn't work, attached USB cable, hold Power + Vol Down for 7 seconds, then switch to Vol Up + Vol Down to enter Download Mode. From there you can flash a known-good OEM build with Odin.
Magendanz said:
Hold Power + Vol Down for 7 seconds, then immediate switch to Power + Vol Up to enter TWRP. If that doesn't work, attached USB cable, hold Power + Vol Down for 7 seconds, then switch to Vol Up + Vol Down to enter Download Mode. From there you can flash a known-good OEM build with Odin.
Click to expand...
Click to collapse
I tried but it isn't doing anything . I just can't seem to enter download mode whatsoever.
bump , please help
ItsHenry said:
I tried but it isn't doing anything . I just can't seem to enter download mode whatsoever.
Click to expand...
Click to collapse
It's possible. When I first started developing for this tablet, I gave up and was ready to let the damn battery drain to reset the device. After about a week, I tried again and finally got the timing right. You need to hold for just a little over 7 seconds, enough so that the reset begins and the screen goes blank. When that happens, immediately switch to the Vol Up & Vol Down combo. (Also, don't forget that you have to have the USB cable connected. It won't work without that.)
Magendanz said:
It's possible. When I first started developing for this tablet, I gave up and was ready to let the damn battery drain to reset the device. After about a week, I tried again and finally got the timing right. You need to hold for just a little over 7 seconds, enough so that the reset begins and the screen goes blank. When that happens, immediately switch to the Vol Up & Vol Down combo. (Also, don't forget that you have to have the USB cable connected. It won't work without that.)
Click to expand...
Click to collapse
Heres what I do ,
1. Attach USB
2.Reset it (vol. down + power)
3.This screen opens
4.I immediately hold Vol. Down + Vol. Up
5.After like 2 seconds, this screen shows up, demanding me to press the power button
6.I ignore it and keep holding vol. down + vol. up, after a while , it goes away automatically , and goes back to this screen
And stays there
Ok , I do not know what I did , but somehow its in download mode now. well thanks for the help @Magendanz , what now , I flashed the original firmware , the tablet started, do I try to root it again?
Is your TWRP version ok for T515?
Also, I was asked to factory wipe the device cause the data was somehow corrupted , idk why was that cause , maybe the twrp version isn't stable? I don't know if I should try again or not.
ItsHenry said:
Ok , I do not know what I did , but somehow its in download mode now. well thanks for the help @Magendanz , what now , I flashed the original firmware , the tablet started, do I try to root it again?
Click to expand...
Click to collapse
I'd flash the OEM firmware, just to go back to a known-good state.
ItsHenry said:
Is your TWRP version ok for T515?
Click to expand...
Click to collapse
Well, I don't have a T515, and so I really can't say for sure. I build the custom kernel from the latest SM-T515 kernel source and follow the same build process as I use for the T510, but I'm relying on others to test it. I can only say for sure that the SM-T510 builds work.
ItsHenry said:
Also, I was asked to factory wipe the device cause the data was somehow corrupted , idk why was that cause , maybe the twrp version isn't stable? I don't know if I should try again or not.
Click to expand...
Click to collapse
If you didn't install Multidisabler, then the fstab will require encryption. If you wiped it in TWRP, rebooting to system will insist the user partition be reformatted with encryption before it will proceed unless dm-verity is disabled.
Okay so my tablet fell.. and the power button got dented inside, luckily its not "Pressed", I can't however press the button as its stuck..I can't seem to pull the button as the dent seems to have the button stuck..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The tablet is working just fine.. I manage to turn on/off screen using the cover/double tapping..
The question is.. what if my tablet powers off ? can I turn it on somehow with the power button ?
Wow, that looks rather unfortunate. So I just did a little bit of experimenting. I am BL unlocked and rooted, but with stock recovery at the moment so I'm not sure if a 100% stock tablet will act any different.
As you likely know, simply inserting the USB/charging cable without holding any buttons will only charge the tablet, not fully boot into Android.
However, If the tablet is completely powered off, you can press and hold the Volume UP button for a short period while inserting the charging/USB cable and the tablet will power up and boot into Android. The catch is this: I'm not exactly sure how long YOU will need to hold the vol+ button. If you keep holding the vol+ button until you get to recovery mode then you are still sort of stuck since you are unable to use the power button as "enter" to select a mode. So you will have to experiment a bit to see just how long you need to hold the vol+ button.
See, I mention this since I am unlocked and rooted, and at boot time I will get a warning screen that gives me some cue as to when to release the vol+ button to boot into Android or to continue holding if I want to get all the way into recovery mode. If I release the vol+ button when I see the red "unlocked tablet" warning text then my tablet boots into Android. But if I continue to hold vol+ then my tablet boots into recovery.
So it will be tricky for you, but you are not totally stuck if your tablet were to power down on you.
ragtop429 said:
Wow, that looks rather unfortunate. So I just did a little bit of experimenting. I am BL unlocked and rooted, but with stock recovery at the moment so I'm not sure if a 100% stock tablet will act any different.
As you likely know, simply inserting the USB/charging cable without holding any buttons will only charge the tablet, not fully boot into Android.
However, If the tablet is completely powered off, you can press and hold the Volume UP button for a short period while inserting the charging/USB cable and the tablet will power up and boot into Android. The catch is this: I'm not exactly sure how long YOU will need to hold the volume up button. If you keep holding the power button until you get to recovery mode then you are still sort of stuck since you are unable to use the power button as "enter" to select a mode. So you will have to experiment a bit to see just how long you need to hold the vol+ button.
See, I mention this since I am unlocked and rooted, and at boot time I will get a warning screen that gives me some cue as to when to release the vol+ button to boot into Android or to continue holding if I want to get all the way into recovery mode. If I release the vol+ button when I see the red "unlocked tablet" warning text then my tablet boots into Android. But if I continue to hold vol+ then my tablet boots into recovery.
So it will be tricky for you, but you are not totally stuck if your tablet were to power down on you.
Click to expand...
Click to collapse
I see! thanks hopefully I wont have to resort to this as I'm keeping my tablet above 50% until I get this problem fixed! I'll also give it a shot when I fix my tablet and update you ! ty for the info
Details of phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Currently I have 2 issues. Number 1 is that I cannot find stock firmware for my phone on Frija. No matter what CSC code I enter it is unable to find it. However, this is not a major problem at the moment as I plan to use this random firmware if things go wrong as it resembles my firmware.
~Main Issue~
My main issue is that even though I have enabled OEM unlock and USB debugging in developer settings I am unable to unlock my bootloader.
I am currently using this method:
Code:
1-Turn off the device.
2-press Volume Down + Volume UP + Connect the USB cable.
3-You will see a warning and under it three options (Volume up: Continue / Volume up long press: Device unlock mode / Volume down: Cancel restart phone.
4-Will choose Volume up long press: Device unlock mode.
5-Unlock bootloader page will appear, Under it are two options (Volume up: Yes / Volume down: No).
6-Press the volume up key.
The device will reboot and a message will appear telling you that the boot loader has been unlocked, Then press the power switch to continue.
7-Then press the power switch to continue.
8-The bootloader is unlocked, Done.
At step 5 the screen either only displays on the lower eighth of the device and shuts down or it shows the "bootloader page" but will not accept a volume up input press and powers down. Any advice on how to resolve this issue?
Update: I attemped to do a factory reset on the phone but the phone won't even boot into recovery mode! Holding PWR+VOLUP on boot does nothing!
what goes wrong?
Linusrg1 said:
what goes wrong?
Click to expand...
Click to collapse
When I reboot to unlock the bootloader, the confirmation screen does not accept the volume up input
Tattered said:
When I reboot to unlock the bootloader, the confirmation screen does not accept the volume up input
Click to expand...
Click to collapse
i have the same phone
with the same issue, i get pass the long press vol up, another menu confirm i want to unlock the bootloader i press vol up for yes . A quick blue screen and boots into recovery.
ro.oem_unlock_supported]: [1]
[sys.oem_unlock_allowed]: [1]
[ro.boot.vbmeta.device_state]: [locked]
And I have had the recovery issue as well. I have been using adb to boot into recovery when needed
first download and install the vcom drivers
https://forum.xda-developers.com/galaxy-a10/how-to/guide-how-to-root-a107m-device-a10s-9-10-t4115919
read this too
https://forum.xda-developers.com/galaxy-a10/how-to/discussion-galaxy-a10s-successfully-t4051189
finally got mine unlocked
first i did a factory reset from the settings not the recovery
i went through the setup without signing in,
activated developer settings , usb debugging . Make sure oem boot loader is selected
.. turned off the phone and pressed up and down as i plugged the usb into the phone
Then long pressed up until the menu changed press up again and it unlocked.
it will factory set again . go through the setup without signing in
activated developer settings , usb debugging .
now sure oem boot loader should be grayed out.
now if your intalling magisk follow the instructions
I was able to flash magisk and it went great for about 10 minutes. my bootloader relocked
if it happens to you just odin the full stock firmware and do the process again
---------- Post added at 10:41 PM ---------- Previous post was at 10:19 PM ----------
firmware
i would use frija the speeds are faster
theres also
https://samfrew.com/download/Galaxy__A10s__/Ow46/TPA/A107MUBU5BTJ3/A107MOWO5BTJ2/