[Q] Help me, i cant connect X10i with my PC (Win7 pro 64bit) - XPERIA X10 Q&A, Help & Troubleshooting

i downloaded SE PC companion, but i cant connect to my PC to updrage Android 2.1,
PC notice: USB device not recognized

you have to mount it.

a2ha said:
you have to mount it.
Click to expand...
Click to collapse
how can i mount it? my X10i doesn't show that.

a2ha said:
you have to mount it.
Click to expand...
Click to collapse
Incorrect. You shouldn't mount the Phone for flashing. There you need to be in Flash Mode (Pressing the back button while powering on the device).

I'll go for the obvious, have you tried reinstalling PC companion? If is says device not recognised it could either be damaged (phone or usb port) or the drivers haven't installed properly (more likely).
So try a different usb port and go though the steps on PC companion and connect the phone only when it tells you to and it should install the drivers correctly or try going though the repair phone procedure without the phone connected (gives instructions). Think it installed different drivers for flashing.

same problem do you find solution

try this
try to download a driver named SEMC_Signed on your pc
after that connect your mobile
before you install this driver go to Mycomputer right click choose Manage then from the new screen choose device manager after that choose Universal Serial Bus, Uninstall any driver related to SE
Hope it works with you as it works with me
i dont know hoe to upload the file SEMC_Signed here

I've got the very same problem, although a bit more advanced. It started out this way then the phone stopped being able to charge too.
It's the USB port and something to do with the solder joints not being very good/strong enough to the main board and pulling off, especially on earlier models of the phone.
It seems to be a very common problem too with the only options being repair to the port and mainboard or replacement of the phone.
I'm awaiting my new phone right now.

Related

Hero USB Connection Not Recognized

Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.

USB Device Not Recognized...

For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
chris_knows said:
Anyone know what the problem is?
Click to expand...
Click to collapse
Your computer or SD. Uninstall any SE drivers with USBDeview and reconnect which should install new drivers and hopefully sort it out.
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Hi, I am experiencing the same thing and this happened after that I first rooted my phone using superoneclick and then replaced my fonts with arabic fonts.
I hope someone can find the root cause for this error.
chris_knows said:
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
Click to expand...
Click to collapse
I've had off and on problems in this area. Searched around and found this thread.
[GUIDE] ADB, Fastboot, and Nandroid for Noobs
This is what he suggests to solve problems with ADB and USB, (below is ALL the work of the Guide author):
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
chris_knows said:
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Click to expand...
Click to collapse
Had the same issue my friend. it's the USB socket within the phone that is gubbed. I spent days searching for a solution to no avail.
Why don't you install PC Companion? You can download it from SE. Once you've finished installation, connect your phone and let it detect your phone.
After that, you can uninstall PC Companion. The purpose is to let PC Companion installs all X10 drivers.
Hi guys,
Well it's not the socket because I can charge it normally with wall charger. Regarding the drivers, of course I have tried with PCcompanion and it didn't work.
Thanks...
well i think it can be the socket, becouse, wall charger only uses two wires of the five the socket has, so may be data+ or data- wire is broken. Have you tried with different usb cable?
As the mobile usb socket only has TWO solder points and it is very small socket and the position is not the best, may be some of the five lanes of the socket have unsoldered...and this is why it charges but it cant connect to computer.
It is only an idea..i hope the cause is some driver, mobile configuration (have you tried to reset your phone? ) or the USB cable.
after changing 3 cables I got it to work...
Thank you for your support.
USBDeview is giving me a virus, the .exe is the problem
x10user2011 said:
USBDeview is giving me a virus, the .exe is the problem
Click to expand...
Click to collapse
nvm i downloaded the file from nirosoft.com instead and it works fine.
USB Controllers
Usually if it works on another computer, but not your own, it is because your USB Controllers are messed up. In Device Manager go to Universal Serial Bus Controllers -> right click each one and say Uninstall(your USB mouse/other peripherals will stop working so be warned) -> restart your computer and let it install all the drivers again. Should be working now.
I'm on v2.3 and taking out the battery and SD card and re-inserting it solved the problem for me.
Saz
***
I'm still having this issue. 3 cables 3 computers I think its my port. Charges fine when I plug it into wall or computer.
Just nothing for data its like nothing is happening.
Sent from my X10i using XDA App

Help needed with driver

Hello,
I need help here. Everytime I flash ANY new rom then when I connect my usb it won't do anything,it doesn't ask if I want to mount,charge or whatever and my pc does not recognize it asking for a driver, but when I am on SE stock rom it works fine and it's pure annoying me.
[The only way it detects my phone is on xrecovery and pressing mount usb storage]
I reinstalled PC companion and nothing.it just says there is an update and asks me to do it and it takes ages..
you should shutdown your phone and press back button and connect your phone to computer...
zjhjack123 said:
you should shutdown your phone and press back button and connect your phone to computer...
Click to expand...
Click to collapse
No, that is not the problem even if I do that it will just boot normally.I tried connecting it to another pc and it recognizes it OK also installs the drivers.
The other pc is W7 32 bit, mine is 64.I think I have a problem with the usb's drivers but I can't figure it out yet how to solve it apart from reinstall the drivers.
Any help will be appreciated!!
Install SE Update Service, and it'll install the drivers for you.
I got it installed, but I had enough by having several BSOD when I reinstalled all the usb drivers,(wtf), almost lost the OS, don't know why, I managed to boot, so i'm going to format my pc and install windows again. Thanks
nanodroid said:
I got it installed, but I had enough by having several BSOD when I reinstalled all the usb drivers,(wtf), almost lost the OS, don't know why, I managed to boot, so i'm going to format my pc and install windows again. Thanks
Click to expand...
Click to collapse
Uninstall SE Updated, reboot PC, install SE Update... No need for formatting.
I had to do it, all my USB drivers were just F**d,no matter what I connect to the pc, it won't recognise it and ask for a driver..I don't know the cause of this, maybe I pushed it too much.everything is working now.
Is it possible for the OP's to close their own thread? I just don't need it opened,it would be good if you could do it to help admins.

SEMC USB Driver won't install

Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.

[Q][HELP] Xperia P won't connect with PC (Charging only)

My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Try unticking "Enable USB Debugging" and then connect your phone to your PC. With PC companion installed your phone should normally be recognised by Windows.
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
Install XP drivers from Flashtool. Also install fastboot drivers from flashtool.
Here's the steps:
1.) Open Flashtool
2.) Open Fastbootmode in FLASHTOOL, (from the thunder icon)
3.) Connect your device in fastboot mode
THIS STEPS SHOULD BE DONE FAST
4.) After connecting your device, select Reboot into fastboot mode (via Fastboot) from the Fastboot Toolbox, (right side)
5.) Congrats, you are now in fastboot, flash any kernel you want with autoroots.
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
i had the same problem... when i try to connect it says no device detect. i was using go launcher but when i used the original xperia launcher and closed the go launcher.. the pc companion detected my phone.. not really sure how that worked.. but it did.. >____< it was hard to follow the technical solution in the internet.. so im glad my problem was simple as that.. just check if you had the original xperia settings.. and try to connect to pc.. hope it works for you too!
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
You should choose "Let me pick a list of device drivers from my computer" and find your phone driver that you installed before.
Sony Xperia P Nt connecting pc charging only
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
thirupathiji said:
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
Click to expand...
Click to collapse
Try another USB cable
ChikeD said:
Try another USB cable
Click to expand...
Click to collapse
I tried also..in the same cable its connects to fine another phones..
it not shows msc mode..mtp mode only.
now i connected my phone into pc.but no usb storage option shows me..
thirupathiji said:
I tried also..in the same cable its connects to fine another phones..
it not shows msc mode..mtp mode only.
now i connected my phone into pc.but no usb storage option shows me..
Click to expand...
Click to collapse
Could be the port then. Definatly seems there is no data connection
ChikeD said:
Could be the port then. Definatly seems there is no data connection
Click to expand...
Click to collapse
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
thirupathiji said:
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
Click to expand...
Click to collapse
The port is where you plug the USB cable into. It's probably damaged.
ChikeD said:
The port is where you plug the USB cable into. It's probably damaged.
Click to expand...
Click to collapse
How to change the port.? s u think correct.
thirupathiji said:
How to change the port.? s u think correct.
Click to expand...
Click to collapse
Unfortunately the port is part of the main board and cannot be replaced
I've seen at least one forum member that reported to fix his port by pulling the contacts with a needle, though I would not recommend it at least untill you have confirmed this is in fact the problem, at service or lab/store.
thirupathiji said:
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
Click to expand...
Click to collapse
My Phone is connected to pc.No driver installation what is the problem?
Hello,
I have an Xperia P and since yesterday I have been having the very same Problem!
I can connect the phone via USB with my computer but the only thing it would do is: CHARGE
no data connection via usb.
I tried everything i know, like rebooting, entering fast boot mode, installing Sony Companion, enabeling / disabeling usb-debugging, deleteing old junk-data to decrease the amount of elemtents on sd-card... but nothing happens. neither windows nor ubuntu-mint will recognize my phone except from charging.
has anyone of you found a fix for the problem?
i run: nemesis kernel v.6.3 and Honami MoonWalker HD V6 (but i think its not a problem of kernel / ROM because i've been using this combination for a while now and it always worked!)
edwardenglish said:
Hello,
I have an Xperia P and since yesterday I have been having the very same Problem!
I can connect the phone via USB with my computer but the only thing it would do is: CHARGE
no data connection via usb.
I tried everything i know, like rebooting, entering fast boot mode, installing Sony Companion, enabeling / disabeling usb-debugging, deleteing old junk-data to decrease the amount of elemtents on sd-card... but nothing happens. neither windows nor ubuntu-mint will recognize my phone except from charging.
has anyone of you found a fix for the problem?
i run: nemesis kernel v.6.3 and Honami MoonWalker HD V6 (but i think its not a problem of kernel / ROM because i've been using this combination for a while now and it always worked!)
Click to expand...
Click to collapse
how do you run nemesis kernel v6.3 and honami moonwalker hdv6..???how it works??pls upload image or video...
thirupathiji said:
how do you run nemesis kernel v6.3 and honami moonwalker hdv6..???how it works??pls upload image or video...
Click to expand...
Click to collapse
What exactly do you mean?
Do you want to know how I installed it on the phone? Then you should look for some tutorials, there are plenty.
Or do you want to know if it is actually working? I can tell you, it is, don't know why you wanna get a video or screenshot, because its actually not really realated to the thread's topic
thirupathiji said:
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
Click to expand...
Click to collapse
same thing happening with my Xperia S :crying::crying:
if u find any solution plz tell me
Any news about this problem? Im facing exactly the same problem.
The phone works, but no USB connection. I cant enter in fastboot, nor flashmode, or whatever.
Tried all trick described in XDA, (rubber band, full charge, full discharge, etc...)
Factory reset doesn't help too.
update:
I have been using the phone without usb Connection ability for a while now and transferred data files via wifi-app on my computer when I needed to.
Eventually the phone died yesterday, because it is not charing anymore ;(
First it started like this:
I had the charger plugged in and it recognized it, showing the flash icon within the battery icon. But nothing actually happened, in fact, the battery kept draining.
So i tried differend chargers and cables but nothing worked. I wasnt able to prevent the phone's battery from completely depleting. Now, the phone won't turn on anymore and when I plug in the charger, the red Status LED will turn on for about 5 minutes, then it turns off again and nothing happens. I can repeat that but i figure, the battery is not getting any energy from the charger
Does anyone know how to fix this, yet?
The phone is slightly over 2 years old...

Categories

Resources