Hi,
I have been having trouble with my camera for over a month now.
I have tried searching this forum and the net extensively to the best of my ability and hence, chose to start a thread to seek help with my trouble.
Suddenly, one morning, about a month back, when i started my camera, it didn't start and showed the message "Camera Failed" giving me the option of just clicking ok...
I tried restarting, factory reset, deleting cache etc, nothing worked..
Then, after a couple of days, it started showing that 'Force Close' message saying the android.app.camera has stopped working unexpectedly.
I upgraded the firmware to KG1 2.3.4, it stayed the same. Nothing changed.
Then, i rooted my phone a few days ago and loaded the camera mod by potatoman hoping that would help solve the problem.. Still, nothing has changed.
The Z device test shows both primary camera and secondary camera as 'X' meaning the hardware doesn't exist or is faulty. But when i try and make a video call, the secondary camera works fine.
I also tried some Cam to FW write code but it wont work as well.. It again gave force close msg only...
Is there any way to check whether there is a problem with my hardware or is this a firmware problem that can be fixed? I hate the thought of giving the phone to the Samsung Service Centre. Also, since i have now rooted the phone, i think i might have to buy some jig to reset some count.
Am very depressed as i love my phone and loved its camera and its been an age since i last used it..
Request help from anyone who can.
Thanks in advance.
have you tried updating it with SamsungApps?
also, try flashing cyanogenmod7 if that doesnt fix it nothing will as cyanogenmod uses its own code, not samsungs
Hit The Thanks Button If I Helped
Thanks a lot for the prompt response..
I searched the cyanogenmod7 mod that you talked about. It sounds like it just isn't for novices like me.. I will still read through it extensively and try and install that..
As far as updating the camera with samsung apps is concerned, i didn't find any updates for the camera there..
Is there a specific way in which i can update the camera through the samsung apps?
themanufan said:
Hi,
I have been having trouble with my camera for over a month now.
I have tried searching this forum and the net extensively to the best of my ability and hence, chose to start a thread to seek help with my trouble.
Suddenly, one morning, about a month back, when i started my camera, it didn't start and showed the message "Camera Failed" giving me the option of just clicking ok...
I tried restarting, factory reset, deleting cache etc, nothing worked..
Then, after a couple of days, it started showing that 'Force Close' message saying the android.app.camera has stopped working unexpectedly.
I upgraded the firmware to KG1 2.3.4, it stayed the same. Nothing changed.
Then, i rooted my phone a few days ago and loaded the camera mod by potatoman hoping that would help solve the problem.. Still, nothing has changed.
The Z device test shows both primary camera and secondary camera as 'X' meaning the hardware doesn't exist or is faulty. But when i try and make a video call, the secondary camera works fine.
I also tried some Cam to FW write code but it wont work as well.. It again gave force close msg only...
Is there any way to check whether there is a problem with my hardware or is this a firmware problem that can be fixed? I hate the thought of giving the phone to the Samsung Service Centre. Also, since i have now rooted the phone, i think i might have to buy some jig to reset some count.
Am very depressed as i love my phone and loved its camera and its been an age since i last used it..
Request help from anyone who can.
Thanks in advance.
Click to expand...
Click to collapse
Does it work with Third party apps from the MArket? like camera 360 and stuff......
If it does then may be the camera apk is corrupted in some way.
I would suggest you try to flash via ODIN your original firmware 2.3.3 from Intratech's Thread in the DeV section http://forum.xda-developers.com/showthread.php?t=1113928&highlight=official+kernel and see if it fixes your problems and then flash 2.3.4
also as mentioned above you should have a camera firmware update in the samsung apps which you could try also
tfn said:
Does it work with Third party apps from the MArket? like camera 360 and stuff......
If it does then may be the camera apk is corrupted in some way.
I would suggest you try to flash via ODIN your original firmware 2.3.3 from Intratech's Thread in the DeV section http://forum.xda-developers.com/showthread.php?t=1113928&highlight=official+kernel and see if it fixes your problems and then flash 2.3.4
also as mentioned above you should have a camera firmware update in the samsung apps which you could try also
Click to expand...
Click to collapse
I have tried a number of third party apps from the market and none of them start...
All force close at start up..
I am trying to figure out how to get the samsung apps update for the camera.. Should i look for it through Kies or through the Samsung Apps app on the phone?
I will try flashing back to my original firmware tonight...
Hi,
i tried restoring my original firmware..
Still, no luck..
Has no one faced a similar problem to the one i am facing??
Can't believe this is happenin !!!
Haven't used my camera for over 45 days now..
Plz help..
Thanks in advance..
Hi,
Im also facing the exact same problem and it seems no one can help. Please let me know if you find any solution.
Sent from my GT-I9100 using Tapatalk
To be honest if you have tried multiple different roms, done full wipes, tried different apps, the only answer left is a hardware or firmware problem.
And if the Samsung apps firmware updated doesn't do anything, then it may be broken
Best bet is to restore it to stock, clear your flash counter and send it back.
veyka said:
To be honest if you have tried multiple different roms, done full wipes, tried different apps, the only answer left is a hardware or firmware problem.
And if the Samsung apps firmware updated doesn't do anything, then it may be broken
Best bet is to restore it to stock, clear your flash counter and send it back.
Click to expand...
Click to collapse
Well, i know that is the last resort.. Just wanna make sure i cant do it on my own cause sending it to Samsung would mean getting into an unnecessary haggle to try and repair / replace the handset..
I don't know how to update the camera firmware using samsung apps..
I have samsung apps installed on my phone but i dunno where to look for firmware updates on it.. can you please help with it..
markshane said:
Hi,
Im also facing the exact same problem and it seems no one can help. Please let me know if you find any solution.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
i definitely will..
in case you come across a solution that works for you, do let me know as well..
Hi,
Can you access the CameraFirmware Standard hidden menu by dialing *#34971539# as im getting a force close error saying the application Factory Test has stopped unexpectedly.
Please check and let me know.
Sent from my GT-I9100 using Tapatalk
Hi,
i remember getting the force close message when i had tried last time to access that menu..
However, since then, i have tried various solutions on different threads and ended up uninstalling the camera fw.. the default fw wouldn't install. each time i try to install, it says 'application not installed'..
Hence, i do not have any camera fw installed on my phone at the moment.
i could, surprisingly, access the hidden menu now..
i checked the version and this is what i got:
Camera FW Ver : Failed
Phone FW Ver : TBEC28
Can i do anything else with that menu as well??
I tried installing the camera.apk in the following thread:
http://forum.xda-developers.com/showthread.php?t=1098834
after that, i got back the camera icon in menu. it still won't work though !!!
i tried accesssing the menu again and it did open..
however, it kept showing the same message as above.
Camera FW : Failed
Phone FW : TBEC28
i tried Phone to CAM FW Write.
it gave a dialogue box with invalid version written on top and the details of camera and phone fw as above.
Somebody help us down here !!!!
You know what sammy care's services is not that bad an option bcoz if u have tried different 3rd party apps...and it still doesnt work that means the problem lies with the camera hardware for sure...something you cant solve on your own.So stop wasting days thinking about it..give it to sammy care and in no time you ll get it fixed \m/
Sent from my GT-I9100 using XDA App
Can you please extract the Factorytest.apk from the system/app folder and post it here? Ill really appreciate it.
Sent from my GT-I9100 using Tapatalk
What is this file and what does it help in?
can it help in reviving the camera somehow?
i vil try and extract it and post here tonight..
I have some firmware files for the camera given to me by one user here on xda. Ill try to dump those files via camera firmware menu, but i cant access it right now as i get that FC on factory test.
Sent from my GT-I9100 using Tapatalk
I have a similar problem; all of a sudden my camera stopped working right at the start of my vacation trip. I get the same "Camera Failed" error. However, a couple of days late I tried and I did get an image, though it was only static. I even managed to take a picture of the static. A day later again "Camera Failed". As it was a 4 week trip I tried numerous of times, one time it worked for a second but the image slowly disintegrated, most of the time FC's, errors or no image.
Cam FW:OCEF02
Phone FW:TBEC28
Once home I tried everything, various camera.apk’s, 3rd party apps, (stock) roms, firmware, nothing. Waiting for my ordered JIG to reset counter before sending it back, it must be hardware related. I didn’t do anything special, no dropping, not letting it get extremely hot or cold, no exotic roms.
markshane said:
I have some firmware files for the camera given to me by one user here on xda. Ill try to dump those files via camera firmware menu, but i cant access it right now as i get that FC on factory test.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Here you go..
This is the file..
Hope you can work some magic with it that can save our lives..
i will try flashing my device to the KF3 official ROM today..
vil let you know how it goes..
fingers crossed..
ph4ge said:
I have a similar problem; all of a sudden my camera stopped working right at the start of my vacation trip. I get the same "Camera Failed" error. However, a couple of days late I tried and I did get an image, though it was only static. I even managed to take a picture of the static. A day later again "Camera Failed". As it was a 4 week trip I tried numerous of times, one time it worked for a second but the image slowly disintegrated, most of the time FC's, errors or no image.
Cam FW:OCEF02
Phone FW:TBEC28
Once home I tried everything, various camera.apk’s, 3rd party apps, (stock) roms, firmware, nothing. Waiting for my ordered JIG to reset counter before sending it back, it must be hardware related. I didn’t do anything special, no dropping, not letting it get extremely hot or cold, no exotic roms.
Click to expand...
Click to collapse
Have you got it back yet?
What did they say was the issue?
Do also let me know how much time they took and whether they just repaired it or replaced it..
Thanks..
So here they are -
1. First, Is there a way to create a fastboot rom by extracting files from the device? Or you just have to download it?
The reason - As I've always found that stock roms in any phone are the most stable, and it'd be nice if we could create a fastboot rom out of it. Not to forget that we can also save a lot of bandwidth.
2. I recently tried to unlock my device and I was met with an error "wait 72 hours, use your device actively". So what rules I have to follow?
Moreover whenever I try to close my mobile connection whether through notification tab or inside settings, my device restarts.
Are these related? Though if I'm quick enough that I close internet before sim could load and show the H/LTE sign, then it doesn't restarts. But if I turn it later on and decide to shut it off, then it's bound to restart.
Was just tapping on usb tethering and it restarted, don't know if my connection went off as it rebooted very quickly, but it restarted again.
Update : Tried to switch from mobile data to wifi, still restarted. Sometimes if the sim is a little slow to connect to internet and I turn it off, then it doesn't restart either. The data got turned on later and got shut off automatically as in actuality it was off, but the phone didn't restarted then.
3. I'm having some problems with face recognition. First I registered in a dark environment, unlocked it 2/3 times right away. But when I tried later, it didn't worked several times either in dark or well lit environment. Then I installed it in a well lit environment, same thing worked 2/3 times right away, but as soon as I changed the location to dark or back to well lit, it didn't worked again. Just tried it RN, it worked several times except a few times, so what 's going on here? I'm confused.
Update : I think it's a distance issue.
4. This is a general question regarding miui. Where is the data saver (restrict background data) feature in miui? I've tried several times to find it in different mi phones. But was never able to find it. It's been here from kitkat or maybe even older, correct me if I'm wrong. So why not provide it in miui, such a feature rich rom? Is it hidden somewhere?
5. The stock rom my phone has is based on Android 8.1 (8.1.0 OPM1.171019.011) to be exact, for rom version refer to reply. I've tried different versions of gcam, but none of 'em has worked for me. Normal camera app works fine, nothing I've encountered yet.
These are the versions I've tried -
* F1v9.5_6.2.030.apk (Couldn't install as 6.2 is only supported by android pie)
* MGC_6.1.021_XCAMBase_F1_v5a.apk (Installed and worked, details below)
* MGC_6.1.021_Potter_v7.1_san1ty.apk (Installed, didn't open)
* MGC_6.1.021_Potter_v7_san1ty.apk (Installed, didn't open)
On photo, the camera lags like I'm playing a game at 2-3 fps, same for other photo related options. Except for panaroma, photo sphere, lens blur, these I didin't had problem with. Except panaroma pic never showed up in camera app or gallery. In video it doesn't lag, so recording normal video was fine. But when I recorded a slo mo video, it lagged after the recording, inside & out the camera app. Inside gcam the audio was fine but outside it was muffled. By outside I mean gallery app & vlc player.
I may try other versions but each app is so big.
Gurkirat_Singh said:
So here they are -
1. First, Is there a way to create a fastboot rom by extracting files from the device? Or you just have to download it?
The reason - As I've always found that stock roms in any phone are the most stable, and it'd be nice if we could create a fastboot rom out of it. Not to forget that we can also save a lot of bandwidth.
2. I recently tried to unlock my device and I was met with an error "wait 72 hours, use your device actively". So what rules I have to follow?
Moreover whenever I try to close my mobile connection whether through notification tab or inside settings, my device restarts.
Are these related? Though if I'm quick enough that I close internet before sim could load and show the H/LTE sign, then it doesn't restarts. But if I turn it later on and decide to shut it off, then it's bound to restart.
Was just tapping on usb tethering and it restarted, don't know if my connection went off as it rebooted very quickly, but it restarted again.
Update : Tried to switch from mobile data to wifi, still restarted. Sometimes if the sim is a little slow to connect to internet and I turn it off, then it doesn't restart either. The data got turned on later and got shut off automatically as in actuality it was off, but the phone didn't restarted then.
3. I'm having some problems with face recognition. First I registered in a dark environment, unlocked it 2/3 times right away. But when I tried later, it didn't worked several times either in dark or well lit environment. Then I installed it in a well lit environment, same thing worked 2/3 times right away, but as soon as I changed the location to dark or back to well lit, it didn't worked again. Just tried it RN, it worked several times except a few times, so what 's going on here? I'm confused.
Update : I think it's a distance issue.
4. This is a general question regarding miui. Where is the data saver (restrict background data) feature in miui? I've tried several times to find it in different mi phones. But was never able to find it. It's been here from kitkat or maybe even older, correct me if I'm wrong. So why not provide it in miui, such a feature rich rom? Is it hidden somewhere?
Click to expand...
Click to collapse
sir, you never mention which version you are on ? since Boot is locked so definately MIUI but which one? global/beta/Eu/ Stable/chine etc?
anways..
Answer for 1, - No you have to redownload it, the Fastboot Rom consist of few extra files like persist and recovery and if they are update you must use the latest one. however via twrp you can take system/data/ and other partitions backup if you want...
for 2. after 72hours, goto dev option and try enabling oemunlock, it will give you warning but do it, come out of dev option and go in and do it again, repeat until the UNLOCK setting stays on UNLOCK, (don't know why it is, but this is how it is,,,, ) , later verify your miui account and sim, keep signed in. download unlocker and sign- in and try unlocking the device (make sure all qualcom drivers are installed)
for 2 again, This is very strange, ONE OF ITS KIND error I AM hearing , I honestly thought this bug is ONLY custom rom related! , you see Poco f1, Beryllium uses MODIFIED VENDOR IMAGE ( can be found at) https://mirror.akhilnarang.me/MIUI/beryllium/.
now these modified vendor images by MIUI dumps logs on data/data/netstat (specially if you are USB TETHERING on 3g, ... you will start suddent System UI reboots and some com.android.xyz processes crashing errors and if you toggle Airplone mode 3g/4g or usb tethering from quick setting , device either hung or system ui restarts or device reboots.
now this error is always in all custom roms due to vendor image
solution? DELETE all files from data/data/netstat and reboot (rooted device on custom rom)
for locked device (unrooted) you may have to flash updated version of miui to fix this bug!
Once you unlock device take latest vendor image ( i am using 9.6.27.9-0 , it has better battery life) and flash custom rom...
for 2 again,,,, some users are complaing that miui10.3.6 alters fastboot commands! and twrp no longer works! , make sure you don't flash miui10.3.6,
for no3,, i don't use facial unlock feature, i will study more and will get back to u if relevent.
for 4
Open MIUI Security App.
Tap on Data Usage Tool.
Tap on Restrict Data Usage.
Now find out those data hunger apps and restrict them by tapping on the green tick.
@YasuHamed First of all big thanks for such a descriptive answer.
1. Now, I'm on stock miui rom i.e. MIUI global stable 9.6.14.0(OEJMIFD).
So If i haven't updated my rom in any way what so ever. can I create a fastboot rom out of it? If I can then also, will that fastboot rom have all the system settings I have on my phone right now? Or will they be default?
2. While not exactly as you said but something similar happened. I do remember enabling the option of oem unlock, but it was turned off. It didn't gave any warnings, so I enabled it multiple times maybe 4, then on the 4th time it showed me a warning and after that it was enabled permanently, even after several boots and reboots.
IDK which "unlock setting" do you mean, which has to say unlock? Is it something different than I mentioned here or are you talking about Mi unlock status, cause I already tapped the 'add account and device' option in it.
Yes really strange indeed. I'm just worried that my hardware isn't damaged? Cause I just got the phone 2 days ago and if it's only a software thing then it's fine. As I'm sure installing/flashing rom would fix it! But I can't RN as you know the time period. Why am I worried? I took my phone to a mobile shop to put lamination on it asap as to avoid any scratches. As you may know that they use heat gun, to do it properly around the curves, I'm just getting a little worried that it damaged my phone's hardware, please give me hope.
Some other strange things happened as well. After some reboots, when I went into file manager app, it would open showing previews etc. but as soon as I click on storage/folders, it says "disconnected" and later I get a message "couldn't add error 10000" like after 10-15 seconds, as I vaguely remember. But after some reboots it would work just fine so IDK what's going on.
3. I also think it's about the experience. More I used it, I think infrared illuminator doesn't throw rays too far, so you have to keep your face a little close.
4. Thanks I found it. But I don't think it is very effective, feature wise. And I also think it isn't working that well RN as it keeps showing the data usage as 0, maybe cause of the bugs? Also the features like restricting data etc for individual apps is good but if you have to restrict background data for each &very app, you have to do that individually. Though if i restrict data, can an app still use background data? As they are different menus. Also it doesn't show usb tethering or hotspot data or anything like that in the list.
Check my 5. question.
Gurkirat_Singh said:
@YasuHamed First of all big thanks for such a descriptive answer.
1. Now, I'm on stock miui rom i.e. MIUI global stable 9.6.14.0(OEJMIFD).
So If i haven't updated my rom in any way what so ever. can I create a fastboot rom out of it? If I can then also, will that fastboot rom have all the system settings I have on my phone right now? Or will they be default?
2. While not exactly as you said but something similar happened. I do remember enabling the option of oem unlock, but it was turned off. It didn't gave any warnings, so I enabled it multiple times maybe 4, then on the 4th time it showed me a warning and after that it was enabled permanently, even after several boots and reboots.
IDK which "unlock setting" do you mean, which has to say unlock? Is it something different than I mentioned here or are you talking about Mi unlock status, cause I already tapped the 'add account and device' option in it.
Yes really strange indeed. I'm just worried that my hardware isn't damaged? Cause I just got the phone 2 days ago and if it's only a software thing then it's fine. As I'm sure installing/flashing rom would fix it! But I can't RN as you know the time period. Why am I worried? I took my phone to a mobile shop to put lamination on it asap as to avoid any scratches. As you may know that they use heat gun, to do it properly around the curves, I'm just getting a little worried that it damaged my phone's hardware, please give me hope.
Some other strange things happened as well. After some reboots, when I went into file manager app, it would open showing previews etc. but as soon as I click on storage/folders, it says "disconnected" and later I get a message "couldn't add error 10000" like after 10-15 seconds, as I vaguely remember. But after some reboots it would work just fine so IDK what's going on.
3. I also think it's about the experience. More I used it, I think infrared illuminator doesn't throw rays too far, so you have to keep your face a little close.
4. Thanks I found it. But I don't think it is very effective, feature wise. And I also think it isn't working that well RN as it keeps showing the data usage as 0, maybe cause of the bugs? Also the features like restricting data etc for individual apps is good but if you have to restrict background data for each &very app, you have to do that individually. Though if i restrict data, can an app still use background data? As they are different menus. Also it doesn't show usb tethering or hotspot data or anything like that in the list.
Check my 5. question.
Click to expand...
Click to collapse
sir Gurkirat_Singh
1. sir you are on Miui9.6 which is based on oreo.I have personally updated till 10.0.03 and have all the fastboot command working fine.
you may download miui9.6.22 (a bit updated version from what you are currently on) from
http://en.miui.com/thread-3995650-1-1.html ( both Recovery (1.6gb) & Fb rom (2.5gb) as backup.
2. under Developer options , poco f1 has this trick that OEM UNLOCK doesnt stick on UNLOCK and keeps coming to default once after you exit Developer option. on my 5th attempt it finally stick to UNLOCK and i was able to unlock the device from unlocker Tool.
3. I havent removed my poco sticker from back (yet), put 9h class, bought extra skin my self and book cover too so yes I second that. I always protect my devices like part of me , even the retired ones are sleeping in boxes with proper covers and unused accories!,
now, update your rom and try again to toggle 3g/4g usb tethering. 99% chances are its software issue! and i have faced this issue many times and its my 5th month with device so i havent noticed any hardware damage or performance / speed problems yet... so don't worry. YES few kernels affect network connectivity, however I am on Optimus Drunk kernel on Havoc 2.8 and its working like a charm!
-about file manager issue, can you try the same with FX File Explorer? and report back plz
4.if you restrict globally then miui will only allow system apps to use data in background as and when needed. MIUI won't allow facebook/whatsapp and other VOIP callers to work in the background. Once in restricted mode on miui9 on RN5pro, I used to miss call on whatsapp unless i wake the device up and notifications starts appearing that i have many whatsapp miss calls!, this feature went even worse on rn5pro when i was on dual sim, miui use to prefer carier sim over data sim always! so yes miui has strict data usage control.
5. i am unable to find 5th question plz help
few screen shots of my poco f1 on HAVOC2.8 / OD kernel build20190820 / magisk19.3 / gapps nano
@YasuHamed
1. I didn't got the answer to my question, please read my question again.
2. I'm gonna assume you mean 'oem unlock' got enabled and I'd be able to unlock after 72 hours are over.
2. a. I hope so as well, thanks again.
Although sometimes it would run fine and even after turning off mobile data, wifi, usb tethering etc. it won't restart. I thought the oem unlock setting helped but when I tried not an hour ago, it restarted. Same thing with file manager, it's working fine now, I'm sure 3rd party file managers would work fine as well. Only a few times, it showed that 'disconnected' error.
4. I guess I'd just have to hit and trial myself.
5. Check my OP (original post).
Gurkirat_Singh said:
@YasuHamed
1. I didn't got the answer to my question, please read my question again.
2. I'm gonna assume you mean 'oem unlock' got enabled and I'd be able to unlock after 72 hours are over.
2. a. I hope so as well, thanks again.
Although sometimes it would run fine and even after turning off mobile data, wifi, usb tethering etc. it won't restart. I thought the oem unlock setting helped but when I tried not an hour ago, it restarted. Same thing with file manager, it's working fine now, I'm sure 3rd party file managers would work fine as well. Only a few times, it showed that 'disconnected' error.
4. I guess I'd just have to hit and trial myself.
5. Check my OP (original post).
Click to expand...
Click to collapse
sir
1. I never read any such method so far where you can reverse engineer the extracted files in partitions and pack them back as fastboot rom. and to think of it thats almost impossible because stockroms usually comes with digitally signed by vendors ensuring no foul play.
2. once your 72hrs over, just unlock the oem unlock switch from Dev option, verify sim of on your mi account, download the unlock tool, login using same mi account, hit unlock, after success, the device will BOOT on POCO logo and "UNLOCKED" will start appearing (always) and all data partition, internal storage will be wiped! so make sure you take backup!
2a. with me on custom rom it wasn't a sure thing but it used to happend randomly when least expected.
5. on oreo , GCAM version came in sep2016 worked for me and later ones are for pie and kept crashing (please check old version on apkmirror)
@YasuHamed Thanks for all the help.
5. I did found a version that is working fine for now. But the features I was interested in was super res zoom, night mode, slo mo etc. Super rez wasn't that impressive(seemed similar to stock zoom), night mode either, slo mo still doesn't work properly and phone heats up, even when I'm not using too old of a version of gcam. Even the stock cam app took some good shots with zooming.
And if those features will work better with pie version then IDK what to say cause that new version would come with better stock cam having slo mo, night mode and all that shiz if not everything. So I'm kinda thinking is this gcam port really relevant? It drastically changed image quality with my RN3 but I don't see that now.
Edit: Also I wanted to say that my phone was working fine now i.e. no reboots after closing mobile data or wifi or switching. But you know what they say don't celebrate too soon. As soon as I used usb tethering the problem arised again, I wasn't able to it for 2 days as my PC wasn't booting. Same reason why I wasn't able to reply to you earlier.
Not only this, this whole bugged situation has started to irritate me a lot. Just today I was trying to run flash on my android. And even on the supported browser, it just wouldn't show up. I really hope after I unlock this device, all of these bugs would go away after the data gets deleted, or I'm gonna be more disappointed.
@YasuHamed This has really started to piss me off now. It has started again.
While IDK if the camera or flash not working properly are related to this whole bugged system or not. But I guess usb tethering is the trigger to this whole thing. Everything was working fine, it started to record the mobile data usage, didn't turned off when turned off the mobile data and even worked when I used usb tethering, but suddenly it reboots and the whole **** show all over again. I'm really pissed now. Oh btw it started showing 0 data used AGAIN.
Gurkirat_Singh said:
@YasuHamed This has really started to piss me off now. It has started again.
While IDK if the camera or flash not working properly are related to this whole bugged system or not. But I guess usb tethering is the trigger to this whole thing. Everything was working fine, it started to record the mobile data usage, didn't turned off when turned off the mobile data and even worked when I used usb tethering, but suddenly it reboots and the whole **** show all over again. I'm really pissed now. Oh btw it started showing 0 data used AGAIN.
Click to expand...
Click to collapse
please consider upgrading to MIUI10.3.x , download the complete recovery rom and name it as update.zip and put it in download folder and open updater and call the rom from there , and flash it, I suggest CLEAN FLASHING so all the data will be deleted!
plz take backup!
@YasuHamed can you please find me fastboot rom for miui 9.6.14(OEJMIFD), I tried but I couldn't find it. I'd do the full clean flash through edl mode. That would resolve any bugs related software, right?
Come to think of it, why did this all started happening at the first place? As I remember, it all started after a failed attempt to unlock, I mean not fail fail, I just had to wait before I could do so. Do you see any patterns?
Also if you know anything in this regard, did the stock rom (9.6.14) had such problems back in the day?
Gurkirat_Singh said:
@YasuHamed can you please find me fastboot rom for miui 9.6.14(OEJMIFD), I tried but I couldn't find it. I'd do the full clean flash through edl mode. That would resolve any bugs related software, right?
Come to think of it, why did this all started happening at the first place? As I remember, it all started after a failed attempt to unlock, I mean not fail fail, I just had to wait before I could do so. Do you see any patterns?
Also if you know anything in this regard, did the stock rom (9.6.14) had such problems back in the day?
Click to expand...
Click to collapse
frankly i never used my poco on miui either on 9 nor on 10 ,
the day I got, I placed unlock request and after 3-4 days, I unlocked my device and put it on HAVOC and since then my experience is based on custom roms but i did flash miui 10 in between just to have a taste of it! and came back to havoc in a day or two, hence i never deeply tested these feature.
however I do know that modified vendore have created usb tethering problems throughout devices
https://mirom.ezbox.idv.tw/en/phone/beryllium/roms-global-stable/
@YasuHamed I don't think mine contains modified rom. As I went ahead and checked all the possibilities like using cn as in china in the codename of a global rom, updates are also working. I even went ahead to check the authenticity of my device. It checks out with some other things on the box as well. So I'm 100% sure, that this has got nothing related to that.
Some other things which I tried in the meantime. I wanted to test if I can run tegra games on this device. So I installed gltools and build prop. Gltools to make the app believe that my device has the gpu it's looking for. Build prop to make app believe I have the device on which this is supposed to run. But I ended up with the same results. So IDK what I did wrong there? In this regard I wanna ask that, is it possible for root checker to show your device is rooted when in fact its not properly rooted.
Why am I asking this? Cause while going through rooting procedure I skipped a few steps like not flashing 'disable force encryption treble' which I did notice after unlocking, during first boot, the device did do some encryption. I skipped that step cause of something mentioned on this link https://twrp.me/xiaomi/xiaomipocophonef1.html regarding dm verity, but as I just checked the same is mentioned regarding rn3 so IDK what to make of this now, but what I did is not 'swipe to allow modifications' and click on 'read only' in twrp recovery and it did rebooted to recovery properly. As mentioned in the link that some system could force to flash stock recovery. Other than that, not factory resetting, data wiping after root, but does it really matter that much?
I can hear you say that dude you're playing with your device too much, of course it's gonna have these problems. To that, I say I didn't do anything like this, prior to unlocking but the problems were still there if not all of them. So what is the root cause of this then? Do I really need to take it service centre to get it checked out or just flashing the rom through edl mode would fix this?
Not just that after I made those changes in build prop(not including gltools) something very weird/interesting happened. If I would restart my device the boot logo shown is poco but the boot splash is mi logo. And when it rebooted after closing the internet, it would only show the mi logo but then I remember that it must've been soft(hot) reboot as it only shows boot splash.
Not only this, after rebooting the style of the rom changed as well. The icon on the home rearranged themselves a bit. So instead of seeing 5 icons in a row, it was all 4 icons on home as well as on app drawer. As you may know Kika keyboard is defaulty present in this rom but after the build prop modifications, whenever I lock my device and wake it up it started showing ads sometimes, maybe the same ad everytime IDK.
Another thing as you know there is an option of reboot to recovery under about phone updates. When I did that that it showed the 'android' logo. I tried it again but it kept showing the loading sign only.
Also how did you find these files? Thanks again m8. You know just for reference if I'd have to find them myself. Also what are those that say (rolled back).
Gurkirat_Singh said:
@YasuHamed I don't think mine contains modified rom. As I went ahead and checked all the possibilities like using cn as in china in the codename of a global rom, updates are also working. I even went ahead to check the authenticity of my device. It checks out with some other things on the box as well. So I'm 100% sure, that this has got nothing related to that.
Some other things which I tried in the meantime. I wanted to test if I can run tegra games on this device. So I installed gltools and build prop. Gltools to make the app believe that my device has the gpu it's looking for. Build prop to make app believe I have the device on which this is supposed to run. But I ended up with the same results. So IDK what I did wrong there? In this regard I wanna ask that, is it possible for root checker to show your device is rooted when in fact its not properly rooted.
Why am I asking this? Cause while going through rooting procedure I skipped a few steps like not flashing 'disable force encryption treble' which I did notice after unlocking, during first boot, the device did do some encryption. I skipped that step cause of something mentioned on this link https://twrp.me/xiaomi/xiaomipocophonef1.html regarding dm verity, but as I just checked the same is mentioned regarding rn3 so IDK what to make of this now, but what I did is not 'swipe to allow modifications' and click on 'read only' in twrp recovery and it did rebooted to recovery properly. As mentioned in the link that some system could force to flash stock recovery. Other than that, not factory resetting, data wiping after root, but does it really matter that much?
I can hear you say that dude you're playing with your device too much, of course it's gonna have these problems. To that, I say I didn't do anything like this, prior to unlocking but the problems were still there if not all of them. So what is the root cause of this then? Do I really need to take it service centre to get it checked out or just flashing the rom through edl mode would fix this?
Not just that after I made those changes in build prop(not including gltools) something very weird/interesting happened. If I would restart my device the boot logo shown is poco but the boot splash is mi logo. And when it rebooted after closing the internet, it would only show the mi logo but then I remember that it must've been soft(hot) reboot as it only shows boot splash.
Not only this, after rebooting the style of the rom changed as well. The icon on the home rearranged themselves a bit. So instead of seeing 5 icons in a row, it was all 4 icons on home as well as on app drawer. As you may know Kika keyboard is defaulty present in this rom but after the build prop modifications, whenever I lock my device and wake it up it started showing ads sometimes, maybe the same ad everytime IDK.
Another thing as you know there is an option of reboot to recovery under about phone updates. When I did that that it showed the 'android' logo. I tried it again but it kept showing the loading sign only.
Also how did you find these files? Thanks again m8. You know just for reference if I'd have to find them myself. Also what are those that say (rolled back).
Click to expand...
Click to collapse
-sir, most of your observations are pertaining to V9.6.14.0.OEJMIFD, where I am not on MIUI hence I will wait for other members to step in and share their views about them.
- you can always use "Disable-Force-Encryption-Treble" from https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389, when flashing rom (clean flash, FORMAT DATA) to disable encryption on kernel level.
- since Twrp official doesnt support OTA so if you call recovery from updater, it wont work! you may have to use Orange Fox (oct/nov2018) version which had OTA support or better flash full rom after downloading desired version from https://mirom.ezbox.idv.tw/en/phone/beryllium/roms-global-stable/
- what are you looking is from different world of android devices, such as TEMP ROOT, IVORY ROOT (sony xperia on android 5.1) days only! when nothing used to be changed but just to gain access of certain partition temporarily, temp root techniques used to apply to extract DRM KEYS. ITs not the case here hence you will have to root your device properly!
- about gpu, i never tried but you can used app such as FK kernel manage or Kernel Auditor to play with your GPU accordingly
- twrp usually ask keep system readonly whenever flashed new room its standard warning to avoid any bootloops since Twrp doesn't know you will be flashing kernel and/or disabling dm varity soon. so it warns you.
- don't worry POCO is FREE from ARB4 $hit so when page said ROLLED BACK, it means those version were recalled back for some buggs and an update released soon after!
@YasuHamed So IDK whether I was clear or not, cause I couldn't understand most of the answers you gave me, maybe they got mixed up, IDK. Anyways I'll try to keep it simple and answer in best way possible and keep it organised so there's confusion.
1. Thing I forgot to mention, after flashing 'disable force encryption treble' file, my root stopped working, I thought it was part of the whole bugged system. In actuality, when I checked the steps while it was flashing, it installed Magisk 16.7, I think. That's why root stopped working. After flashing latest Magisk, it worked fine. So, After flashing "disable" file, Can I flash Magisk over it to get the latest Magisk version? Will it affect the disabled function in any way? Currently I have 3 files, which one do you suggest -
Disable-Force-Encryption-Treble.zip
DisableForceEncryption_Treble_v18.0.zip
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Third one is form the link you provided.
2. DK if TWRP supports OTA, but I was able to boot to TWRP after tapping on reboot to recovery, just saying. By full rom do you mean the stock roms?
3. Did you meant if it checks out in root checker, then it's properly rooted already!?
4. This FK Kernel Manager or Kernel Auditor, you talk about, does it works the same way as Build Prop or GLTools? Cause I'm not an expert in using these tools. I just followed the steps mentioned in this video https://youtu.be/Y1wPIHhM1Yw similarly for the other games I was trying to run by gathering build prop info related to shield tv/tablet/portable but it didn't worked in my favor.
5. So if you chose the option of 'swipe to allow modifications' options instead of 'read only', and your phone boots without any bootloops or anything, as I've done a lot of time on my RN3 without even thinking about it, does that mean that everything's fine? Even when you haven't disabled dm-verity and still are on stock kernel(the one contained in stock roms i think). Does stock kernel changes to custom when you flash a custom rom? Does TWRP makes any changes to stock one if your system boots without any above mentioned problems having stock rom? Any details regarding differences in these two options?
6. When you say an update released soon after? Do you mean same versions were released with bugs fixed or a new/next version was released? In other words, is it ok to try these versions with such bad bugs that they were called back? Were those system breaking bugs fixed in the same version? Also again, I'd really appreciate if you could tell me how'd you find these roms?
7. I'm almost certain that usb tethering is the trigger to these reboots when turning off internet. Cause if I power off the device and turn it on later, then turn on-ff data, it doesn't reboot but sometimes it does. But as soon as I turn usb tethering on, it would reboot and the whole debacle starts again. And the ads kika shows are different along side something related to ram cleaner everytime. So I think it does uses internet. IK you don't use miui, just putting the info out there, if someone thinks of stepping in later.
please view my replies sir
Gurkirat_Singh said:
@YasuHamed So IDK whether I was clear or not, cause I couldn't understand most of the answers you gave me, maybe they got mixed up, IDK. Anyways I'll try to keep it simple and answer in best way possible and keep it organised so there's confusion.
1. Thing I forgot to mention, after flashing 'disable force encryption treble' file, my root stopped working, I thought it was part of the whole bugged system. In actuality, when I checked the steps while it was flashing, it installed Magisk 16.7, I think. That's why root stopped working. After flashing latest Magisk, it worked fine. So, After flashing "disable" file, Can I flash Magisk over it to get the latest Magisk version? Will it affect the disabled function in any way? Currently I have 3 files, which one do you suggest -
Disable-Force-Encryption-Treble.zip
DisableForceEncryption_Treble_v18.0.zip
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Third one is form the link you provided.
I flashed "DisableForceEncryption_Treble_v18.0.zip" and it worked/works, but I always flash before magisk., the current version is Magisk19.3 hence I recomend you to use the updated version, 16.7 is obsolete long back. However if 19.3 may give you bootloops then the max you can go back is Magisk18.0 (since after 18.1, Magisk started using different Script language unknown to some recoveries. However if BOTH (your recovery and Magisk are latest, it should work just fine
2. DK if TWRP supports OTA, but I was able to boot to TWRP after tapping on reboot to recovery, just saying. By full rom do you mean the stock roms?
once on RN5p I tried updating OTA via twrp, it never booted to update hence I recomend you to download full recovery rom 1.8gb, of the build you want and flash it via twrp
3. Did you meant if it checks out in root checker, then it's properly rooted already!?
plz try any root checker and see
4. This FK Kernel Manager or Kernel Auditor, you talk about, does it works the same way as Build Prop or GLTools? Cause I'm not an expert in using these tools. I just followed the steps mentioned in this video https://youtu.be/Y1wPIHhM1Yw similarly for the other games I was trying to run by gathering build prop info related to shield tv/tablet/portable but it didn't worked in my favor.
fk kernel manager or kernel Auditor does support editing build prop, apart from many tweaks for GPU and Cores. the video shows a simple edit in order to think your device is some other version of Galaxy to trick samsung app ; however The boy didn't explain why he just didn't install the already downloaded apk file from fortnite website ?
5. So if you chose the option of 'swipe to allow modifications' options instead of 'read only', and your phone boots without any bootloops or anything, as I've done a lot of time on my RN3 without even thinking about it, does that mean that everything's fine? Even when you haven't disabled dm-verity and still are on stock kernel(the one contained in stock roms i think). Does stock kernel changes to custom when you flash a custom rom? Does TWRP makes any changes to stock one if your system boots without any above mentioned problems having stock rom? Any details regarding differences in these two options?
if you are flashing MIUI From twrp, and DON"T wana ROOT then yes you should never allow system modification because then device will never boot in to system due to DM-Verity. However if you are rooting yoru device, try reading Magisk Lines, It always patch fstab and disable Dm-verity, once its disabled /system parition permision wont be verified on boot. So when you boot in to twrp and you know you are going to flash Magisk, you can ALLOW SYSTEM MODIFICATION swip
on Custom Roms it doesn't matter, because twrp never ask such question. "allow system modification" is only limited to StockRoms
6. When you say an update released soon after? Do you mean same versions were released with bugs fixed or a new/next version was released? In other words, is it ok to try these versions with such bad bugs that they were called back? Were those system breaking bugs fixed in the same version? Also again, I'd really appreciate if you could tell me how'd you find these roms?
the next version above ROLLED BACK one is the bug fixed. (now i don't know what exactly were they) . Also MIUI forums for devices always announce updates! you can google
7. I'm almost certain that usb tethering is the trigger to these reboots when turning off internet. Cause if I power off the device and turn it on later, then turn on-ff data, it doesn't reboot but sometimes it does. But as soon as I turn usb tethering on, it would reboot and the whole debacle starts again. And the ads kika shows are different along side something related to ram cleaner everytime. So I think it does uses internet. IK you don't use miui, just putting the info out there, if someone thinks of stepping in later.
well probably this is the bug of this version 9.6.14 hence you should upgrade atleast to 9.6.20 in order to compare
Click to expand...
Click to collapse
@YasuHamed Again a little bit confused by some answers, but I'll try to keep it simple.
1. Do you mean you flash "d-f-e-t" file before magisk? That's what I was asking, does magisk interfere with the steps, this file does, in anyway? And why didn't u used the 'third file', the one from the link you mentioned, isn't that the better one in some ways?
2. I never said I tried to install an OTA through TWRP. I just said I was able to boot to TWRP through 'reboot to recovery' option under system updates tab.
3. I checked it with one 'root checker' app, do I need to check with others? Can you name some?
4. He didn't used the same apk, cause he wanted to show & tried to explain, what kind of changes we were doing to the system, rather than just blindly following the instructions, like what normally happens in these scenarios. I thought that was given, anyways, I've tried same things before in past. When I had the apk, data/obb files of an app/game, I'd simply just try to install them on miui and they'd just crash, but doing the same thing on a custom rom and it works, no special steps. Similarly did all this work, and ended with crashes, maybe I'll do the same thing on a custom rom and it'll work. On that note, do you know where I can download stable builds of lineage OS, or do I just have to research which one is a a stable version, Or is it okay to download any latest nightly builds, the only thing they post on their official website?
5. If one taps on 'read only' option the first time, and when it boots to twrp again and doesn't asks for it. Can one find that option somewhere else in twrp? I did that and still I'm booting normally, how's that possible then, if you say system won't boot!? And what does that option 'allow system modifications' do exactly? How unlocking & rooting are different, security wise? Cause vendors like Xiaomi allow unlocking officially, which means it doesn't void your warranty, though I don't know what would happen if you walk in with an unlocked device in their service centre, cause I've never done it, But they still warn you about data stealing during unlock process etc. Although if you root your device then it's out of warranty, but it's a much simpler process than unlocking. So what's the difference, is the threat real? Or is it just marketing to keep you locked in the stock experience?
6. Again you didn't tell me how'd you find those roms!?
7. It's just really random, sometimes it doesn't restart even when internet is turned off, sometimes with usb tethering on or sometimes not even connected to the pc. Kika still shows them ads, also after an app is installed/uninstalled etc. Other than those appearance changes, I wasn't also able to dial down the brightness to the very low. Whenever i did it, it restarted, camera stopped working etc. I revert the changes I did in build.prop to make it poco again, it rebooted and the boot splash was fixed, but as soon as the ui showed up, the poco launcher kept crashing. It was good that I had my apps opened in background and miui remembers them even after reboot, otherwise there would've been no way to access build.prop, so I revert it back to any shield tv/portable/tablet settings and it started working normally. Finally I've decided, I'm gonna edl flash the stock rom and report back if these bugs happen again(I hope it's only software), I downloaded 2 roms over this period of time i.e. 9.6.14 & 10.3.7.0, will try and get back to you.
Sorry for the late reply, got a little busy.
sir ..........................
Gurkirat_Singh said:
@YasuHamed Again a little bit confused by some answers, but I'll try to keep it simple.
1. Do you mean you flash "d-f-e-t" file before magisk? That's what I was asking, does magisk interfere with the steps, this file does, in anyway? And why didn't u used the 'third file', the one from the link you mentioned, isn't that the better one in some ways?
1- Yes I flashed DFET before Magisk19.3 - and why i didn't use the third file, i remember in post one user confirmed this particular one working for him (atleast) so i downloaded that one.
2. I never said I tried to install an OTA through TWRP. I just said I was able to boot to TWRP through 'reboot to recovery' option under system updates tab.
2- ideally this is the case with recoveries which doesn't support OTA, OrangeFox based on OLD version of TWRP does support OTA , I NEVER TRIED but worth reading the post. you should find it in the Poco Development section
3. I checked it with one 'root checker' app, do I need to check with others? Can you name some?
3- I use THIS ONE
4. He didn't used the same apk, cause he wanted to show & tried to explain, what kind of changes we were doing to the system, rather than just blindly following the instructions, like what normally happens in these scenarios. I thought that was given, anyways, I've tried same things before in past. When I had the apk, data/obb files of an app/game, I'd simply just try to install them on miui and they'd just crash, but doing the same thing on a custom rom and it works, no special steps. Similarly did all this work, and ended with crashes, maybe I'll do the same thing on a custom rom and it'll work. On that note, do you know where I can download stable builds of lineage OS, or do I just have to research which one is a a stable version, Or is it okay to download any latest nightly builds, the only thing they post on their official website?
4- To get general IDEA about altering Build.Prop, The video is Good! however you can not assume Samsung Modded Android over MIUI's one! also It seems the boy in the video has Android7 where Miui Poco is atleast on 8.1, there is huge difference!
The only way to find out whether any type of build.prop (EVEN ON CUSTOM ROMS) will WORK or NOT on POCO; is to Try and find out yourself.
5. If one taps on 'read only' option the first time, and when it boots to twrp again and doesn't asks for it. Can one find that option somewhere else in twrp? I did that and still I'm booting normally, how's that possible then, if you say system won't boot!? And what does that option 'allow system modifications' do exactly? How unlocking & rooting are different, security wise? Cause vendors like Xiaomi allow unlocking officially, which means it doesn't void your warranty, though I don't know what would happen if you walk in with an unlocked device in their service centre, cause I've never done it, But they still warn you about data stealing during unlock process etc. Although if you root your device then it's out of warranty, but it's a much simpler process than unlocking. So what's the difference, is the threat real? Or is it just marketing to keep you locked in the stock experience?
5- Once twrp changes the /System as writable, cannot be undone from Twrp itself - since you have magisk16.7 as you mention earlier the dm-varity is turned off and you are booting normally.
-unlocking means, your device can accept fastboot commands to Alter various Partitions developed by Third Party! /recovery /system /vendor /oem etc
-Rooting is Gaining /system access in Android OS to perform Forbiddon and/or Unsafe Commands / Apps etc
- now your question about security , i will simply say! its HIGHLY UNSECURE to unlock your device & Root it!, there is debate about SeLinux Permissions to be Permissive or Enforcing , SELinux in enforcing mode is considered to be little better and secure but Permissive mode means any command can be run even by hacker to gain your /system access ! REFERENCE
- unlocked bootloader is also very unsafe! anyone can just flash any compatable recovery and atleast WIPE your data!
HENCE this is what i say to all my fellow friends and mates in general! if you are CONCERN security privacy , NEVER ROOT your device! or keep two devices, one being as family device! for fotos, emails contacts etc! and play with the other!
- about warranty! every region has different rules! my country's Xiaomi centre doesn't cover any brick devices because here they are alreadly selling many Redmi fones on UNLOCKED mode! directly from china!
6. Again you didn't tell me how'd you find those roms!?
https://c.mi.com/oc/miuidownload/index select poco and see officially available rom
7. It's just really random, sometimes it doesn't restart even when internet is turned off, sometimes with usb tethering on or sometimes not even connected to the pc. Kika still shows them ads, also after an app is installed/uninstalled etc. Other than those appearance changes, I wasn't also able to dial down the brightness to the very low. Whenever i did it, it restarted, camera stopped working etc. I revert the changes I did in build.prop to make it poco again, it rebooted and the boot splash was fixed, but as soon as the ui showed up, the poco launcher kept crashing. It was good that I had my apps opened in background and miui remembers them even after reboot, otherwise there would've been no way to access build.prop, so I revert it back to any shield tv/portable/tablet settings and it started working normally. Finally I've decided, I'm gonna edl flash the stock rom and report back if these bugs happen again(I hope it's only software), I downloaded 2 roms over this period of time i.e. 9.6.14 & 10.3.7.0, will try and get back to you.
EDL ? you mean fastboot rom flashing via miflasher!, thats not edl! to trigger EDL you must have
1. authorized Xiaomi Account
2. back panel of poco to be opened and short test point to put device in EDL
Sorry for the late reply, got a little busy.
Click to expand...
Click to collapse
@YasuHamed
1. I tested the third file. It worked without any problems even after flashing magisk. Cause it doesn't mess or flash any magisk files, it also detects what sort of root the phone have.
3. -> 2. I used the same app to check so.
3. You mention some good points there. That's the same reason, things worked out in custom roms and not miui in my earlier experiences. As miui is heavily loaded compared to any custom rom or samsung experinece. I'll try it on other OSs and report back. On the same note, from what I've read that lineage team doesn't release stable builds or at least not anymore. I'm currently downloading pixel experience. Should I go with this one or lineage os? Is it like any other custom OS or heavily loaded like miui? Also what is the difference between PE normal vs plus vs caf? Also I'm gonna try multi rom, as it would be much better for testing.
4. (new) As you said you use havoc os or havoc kernel I think. Which other custom roms have you tried? Is havoc your favourite one? What sort of uses you make with these custom OSs, just normal daily use or something else? Or anything else you wanna share in this manner about your experience, recommendations or anything else.
5. I think I understand a bit, if I use the option 'swipe to allow system modifications' and do not root my device i.e. not flashing magisk which in turn won't disable dm-verity and then if I try to boot to system, it'll go in booloop?
IF I'm right, then what is "read only & root" vs "allow system modifications & root"? Also I have the latest magisk version. What I was trying to say, "When I flashed the 'first' file out of the three 'dfet' files, it flashed magisk 16.7 as well causing latest magisk manager to not work", which I figured out and fixed immediately.
Also when the first time I flashed twrp, only then I got these options. But later on when I flashed the fresh rom through fastboot and then the recovery I simply got booted to the main menu without getting to choose any of these options. During that, I formatted all the stuff like system, internal storage etc. which i wasn't supposed to format, cause of which I had to flash again, but I forgot to select the 'clean all' option instead of 'clean all and lock' option. So i had to unlock again and flash twrp again. But even after all that twrp remebered all the changes I made to it like time, vibration, brightness settings and again it didn't showed any of those two options. More on this in the last response.........
6. And again you gave me the link to miui's official website. I was asking how'd you find all those older roms at one place.
7. So I finally flashed miui rom today, having high hopes, which were proven to be right first then crushed down later. After I flashed the rom, I tested the heck out of it like turning data on/off, usb tethering on/off, no problem occured, didn't found any bugs except one in data usage, it was showing like 100-600gigs(I don't remember exactly) of usage, then it started showing 1300-1400gigs, but after seeing that my confidence dipped down a little.
But still I moved on and flashed twrp on it to get it rooted. After rooting everything was fine even the data usage bug also went away, then I installed gltools and I had my phone connected to pc in usb tethering, suddenly I hear a sound(it restarted<insert gta sa cj meme>) and it starts all over again. I flashed 9.6.14 ver of rom btw.
As you already know from my response above that I was only able to flash through fastboot mode and I wasn't able to get into edl mode as I read just a few hours ago that it's locked away. So my question is, is there a chance that this all could be solved if the rom is flashed through edl. As that's much more of a clean install rather than fastboot, as I mentioned twrp remembered the settings and all that shiz. Or should I just try another ver of miui I have or the custom rom I've downloaded?
Also to get into edl mode, does both of these requirements needed to be met? Or any 1 should work? :-
Authorised account - So who can get this? Is there any bypass or workaround for it?
Test Point - I don't wanna open my phone, as you know it's new & all, tho it's not a problem if there's no other way. It's just that I have some bad memories regarding test point of my beloved RN3(now dead) so I just wanted to stay away from hardware as long as possible. Is there any bypass or a workaround for it?
................................................................................................................................................................................
Gurkirat_Singh said:
@YasuHamed
1. I tested the third file. It worked without any problems even after flashing magisk. Cause it doesn't mess or flash any magisk files, it also detects what sort of root the phone have.
we i am glad , we have a winner here
3. -> 2. I used the same app to check so.
3. You mention some good points there. That's the same reason, things worked out in custom roms and not miui in my earlier experiences. As miui is heavily loaded compared to any custom rom or samsung experinece. I'll try it on other OSs and report back. On the same note, from what I've read that lineage team doesn't release stable builds or at least not anymore. I'm currently downloading pixel experience. Should I go with this one or lineage os? Is it like any other custom OS or heavily loaded like miui? Also what is the difference between PE normal vs plus vs caf? Also I'm gonna try multi rom, as it would be much better for testing.
Temporarily , LOS is suspended but even unofficial roms till mid August are very stable ! you should try! , hoever Pixel is very popular too, on deeper level what diferences you may find thats only user can discover over time. there is no direct answer to this question! LOS is driven from CynogenMod which was on AOSP wehre Pixel is CAF based, so the difference comes on Kernel Level this means CAF rom may have different Hardware performance / behaviour when compare to AOSP based roms (and vice versa). I am not sure about multirom as a daily driver, yes I would like to try for fun but wont keep it.
4. (new) As you said you use havoc os or havoc kernel I think. Which other custom roms have you tried? Is havoc your favourite one? What sort of uses you make with these custom OSs, just normal daily use or something else? Or anything else you wanna share in this manner about your experience, recommendations or anything else.
on Poco i have tried Nitrogen, Omni, MoKee, BootLeggers, CrDroid, LOS and Havoc..
BootLeggers is pretty stable rom! however CrDroid is outstanding because the developer @gwolfu is more active and releases many updates (sometimes 3-4 in a month). Crdroid has serious level of customization (dirtyUnicorn) and you can change the look of your rom in every possible way you imagine!
so the question is WHY am I on Havoc, well the simple answer is both Crdoid and Havoc Offers serious level of DU customization & variations found on deeper level. some items which crdroid doesn't offer i found in Havoc so I stick to it, moreoever I feel the font and resolution by default in havoc is next to pixel where in Crdoid you manualy have to fix (dpi and font)
now I am on havoc2.8 but I am using Optimus Drunk Kernel (which is also used by CRDROID) - the developer of havoc2.8 offers SHADOW kernel which as I said I feel is not very battery effcient (atleast for me, others can disagree)
5. I think I understand a bit, if I use the option 'swipe to allow system modifications' and do not root my device i.e. not flashing magisk which in turn won't disable dm-verity and then if I try to boot to system, it'll go in booloop?
IF I'm right, then what is "read only & root" vs "allow system modifications & root"? Also I have the latest magisk version. What I was trying to say, "When I flashed the 'first' file out of the three 'dfet' files, it flashed magisk 16.7 as well causing latest magisk manager to not work", which I figured out and fixed immediately.
-keeping system Read only OR swipe to allow /system as writable is on Recovery Level ,
- when you keep system on READY ONLY on recovery Level and later flash magisk, the module magisk modify the /system permission which twrp doesn't know!
-if you "allow system modification on twrp level the /system is now set on writable permission by twrp, and magisk is a module which is always set to alter /system partition permission irespective of Global policy on recovery level
Also when the first time I flashed twrp, only then I got these options. But later on when I flashed the fresh rom through fastboot and then the recovery I simply got booted to the main menu without getting to choose any of these options. During that, I formatted all the stuff like system, internal storage etc. which i wasn't supposed to format, cause of which I had to flash again, but I forgot to select the 'clean all' option instead of 'clean all and lock' option. So i had to unlock again and flash twrp again. But even after all that twrp remebered all the changes I made to it like time, vibration, brightness settings and again it didn't showed any of those two options. More on this in the last response.........
now this let me think a little bit, the only possible explaination (in theory) I found is
- when you flash all or clean flash all, its not necessary that /recovery partition is first erased by miflasher! and recovery.img file has many folders including setting folder! so miflasher and later by you simply there was swaping of recoveries, the Tree was always there! when you reflashed twrp! try to do this way
Code:
fastboot erase recovery
fastboot flash twrp.img
this should erase any previous left over data and settings
try and let me know!
6. And again you gave me the link to miui's official website. I was asking how'd you find all those older roms at one place.
i simply google / web search rom number with device name with code name like Miui9.6.20 fastboot download poco f1 beryllium and google suggest few popular results which usually works for me!
7. So I finally flashed miui rom today, having high hopes, which were proven to be right first then crushed down later. After I flashed the rom, I tested the heck out of it like turning data on/off, usb tethering on/off, no problem occured, didn't found any bugs except one in data usage, it was showing like 100-600gigs(I don't remember exactly) of usage, then it started showing 1300-1400gigs, but after seeing that my confidence dipped down a little.
But still I moved on and flashed twrp on it to get it rooted. After rooting everything was fine even the data usage bug also went away, then I installed gltools and I had my phone connected to pc in usb tethering, suddenly I hear a sound(it restarted<insert gta sa cj meme>) and it starts all over again. I flashed 9.6.14 ver of rom btw.
I would say 9.6.14 had bug so reflashing didnt help! as I said before, consider upgrading atleast to 9.6.20
As you already know from my response above that I was only able to flash through fastboot mode and I wasn't able to get into edl mode as I read just a few hours ago that it's locked away. So my question is, is there a chance that this all could be solved if the rom is flashed through edl. As that's much more of a clean install rather than fastboot, as I mentioned twrp remembered the settings and all that shiz. Or should I just try another ver of miui I have or the custom rom I've downloaded?
Also to get into edl mode, does both of these requirements needed to be met? Or any 1 should work? :-
Authorised account - So who can get this? Is there any bypass or workaround for it?
Test Point - I don't wanna open my phone, as you know it's new & all, tho it's not a problem if there's no other way. It's just that I have some bad memories regarding test point of my beloved RN3(now dead) so I just wanted to stay away from hardware as long as possible. Is there any bypass or a workaround for it?
till MiMax
-holding THREE buttons for 30 seconds used to trigger edl mode
-miflasher simply identify EDL mode and used to flash the beryllium fastboot rom
the question is why they stopped?
well fastboot rom when extracted, hackers can simply alter and repack the img files! YOU CAN EVEN place twrp as "recovery.img" in extracted folder miui will flash twrp thinking its vendor recovery! and the device in EDL mode will accept it..
this was serious security risk! so they capped EDL mode in both ends
- miuiflasher needs AUTHORISED ACCOUNT
- DEVICE won't enter in edl mode unless you remove back cover and under batter wire you short two motherboard points with thin wire or tweaser! (and immediately connect usb calbe to system)
now what can you do?
1. use older version of Miflasher which doesnt verify rom
2. user altered rom of specific build or time to WAKE UP your BRICKED device!
I have never done it so you need to investigate and use your poco as gunie pig to test these methods after REMOVING Back Panel (HIGHLY NOT RECOMENDED
or take device to authorised Mi Dealer and let them EDL for you!
Click to expand...
Click to collapse