[HELP] Phone Bricked, ROM Manager - Optimus One, P500, V General

i was trying ROM manger, i installed custom recovery using phone model Commtiva Z71. when i tried to backup my current ROM, screen turns gray with follwing on upper corner of screen
"Fastboot mode started
UDC_start()"
i pulled out battery, trried hard reset, but nothing happening. after LG logo it keep returning to same screen. Plz help

You need to reflash original firmware.

hannibal3454 said:
i was trying ROM manger, i installed custom recovery using phone model Commtiva Z71. when i tried to backup my current ROM, screen turns gray with follwing on upper corner of screen
"Fastboot mode started
UDC_start()"
i pulled out battery, trried hard reset, but nothing happening. after LG logo it keep returning to same screen. Plz help
Click to expand...
Click to collapse
...what? you tried to use custom recovery for P500 on your "Commtiva Z71"?

I was also having same problem then I went LG service centre they changed my PC board
Sent from my LG-P500 using XDA App

Thanks for replies, i repaired it using KDZ. now installed Megatron
AzNxJoHnNy said:
...what? you tried to use custom recovery for P500 on your "Commtiva Z71"?
Click to expand...
Click to collapse
No, i tried custom recovery for "Commtiva Z71" on P500 as P500 was not showing in the list.

hannibal3454 said:
Thanks for replies, i repaired it using KDZ. now installed Megatron
No, i tried custom recovery for "Commtiva Z71" on P500 as P500 was not showing in the list.
Click to expand...
Click to collapse
Hi,
How did you repair it and re-flashed it ?

hannibal3454 said:
Thanks for replies, i repaired it using KDZ. now installed Megatron
No, i tried custom recovery for "Commtiva Z71" on P500 as P500 was not showing in the list.
Click to expand...
Click to collapse
Ah okay, cos I looked up the phone and its nothing like P500 lol XD
To root your phone, you can use z4root, iirc rom manager doesn't support p500.

buzzdr0id said:
Hi,
How did you repair it and re-flashed it ?
Click to expand...
Click to collapse
Get into emergency mode by using key combination "back+volume up+power" then connect it with PC and use KDZ to update your firmware bingo and by this I didn't loosed any setting or data. Just the root for which I used zroot
Sent from my LG-P500 using XDA App

I got the same problem but in service center they fix it for free. I dont see that this is some big deal of an problem really.

Ya while when u connecte ur phone using kdz it will show the message as no phone found...
Sent from my LG-P500 using XDA Premium App

mvgadagi said:
Ya while when u connecte ur phone using kdz it will show the message as no phone found...
Click to expand...
Click to collapse
I think the OP has already managed to solve it one way or the other in the 3 1/2 months since this has been posted.
http://lmgtfy.com/?q=necropost

Related

[Q] Lg optimus T p509 booting to recovery blocked (or is it just stubborn?)?

I've tried every possible way to get this phone to boot to recovery it just does not.
Even tried volume down instead of up all it does is erase my information.
However, a friend of mine own a lg optimus t p500 and boots to recovery with no issue.
I've also tried booting via apps from market.
I am rooted and running stock rom not sure if its updated I've owned it for only a few months and bought it used for 50 bucks.
If you guys have a conclusion let me know I'd really like a nice fast custom rom..
I've searched google and no answers for my stubborn phone.
Abyykinns said:
t.
Even tried volume down instead of up all it does is erase my information.
Click to expand...
Click to collapse
Hmmm... At the risk of stating the obvious: have you flashed a custom recovery? Because the stock one does exactly what you have described.
doktornotor said:
Hmmm... At the risk of stating the obvious: have you flashed a custom recovery? Because the stock one does exactly what you have described.
Click to expand...
Click to collapse
I may be misreading your question but I never flashed anything to the phone, somehow it doesn't allow it
But, now all it does is force close and crash including messaging apps the stock messaging app and handcent is the os like corrupt or something? My friend seems to think so.
Abyykinns said:
I may be misreading your question but I never flashed anything to the phone, somehow it doesn't allow it
Click to expand...
Click to collapse
LOL. Without flashing a custom recovery, you cannot boot to it! The stock one just does a factory reset and nothing else.
Abyykinns said:
I've tried every possible way to get this phone to boot to recovery it just does not.
Even tried volume down instead of up all it does is erase my information.
However, a friend of mine own a lg optimus t p500 and boots to recovery with no issue.
I've also tried booting via apps from market.
I am rooted and running stock rom not sure if its updated I've owned it for only a few months and bought it used for 50 bucks.
If you guys have a conclusion let me know I'd really like a nice fast custom rom..
I've searched google and no answers for my stubborn phone.
Click to expand...
Click to collapse
Ok, your new so I will go easy.
First thing you need to do is use the search button and figure out how to install clockwork recovery for your model of phone. Start there.
Sent from my LG-P500 using XDA Premium App
Abyykinns said:
I may be misreading your question but I never flashed anything to the phone, somehow it doesn't allow it
But, now all it does is force close and crash including messaging apps the stock messaging app and handcent is the os like corrupt or something? My friend seems to think so.
Click to expand...
Click to collapse
Go find rom manager on the market then launch it and flash clockwrk recovery.
Sent from my LG-P509 (Optimus T) with Void Gear using XDA App
Your a noob i see you can't boot into recovery because you don't have a custom recovery .. like that (Guy said get rom manger ..and go from there )
From My LG Optimus P509 CM7
BlackRose 22 said:
Your a noob i see you can't boot into recovery because you don't have a custom recovery .. like that (Guy said get rom manger ..and go from there )
From My LG Optimus P509 CM7
Click to expand...
Click to collapse
This last post was unnecessary I don't have much experience with this device but I have my answers from the others, thanks guys I'll see what I can with it but with the force closing I may just have to return it.
I also "thanked" everyone that helped, I was completely lost.

[SOLVED ]Rom Manger/CWM. Problems

Well I updated rom manger which came with a new update of CWM 5.1 or so.... so I download the new one this was like a few days ago. So yesterday I decided to go into recovery mode to see if there was any new changes to it. It rebooted but all I got was a black screen
And
Fastboot mode started
Udc_()
On the left hand of the screen
IF Yu have this problem just follow the link below
http://forum.xda-developers.com/showthread.php?t=1088046
Sent from my LG-P509 using XDA App
I had that problem too and i read a post that you have to flash it twice because sometimes the recovery doesnt stick.my phone got fastboot before i knew then .well you can try reflashing recovery using sdk(forgot the link of tut).i used kdz to install/flash stock froyo and rooted again.just relax and search around for tutorials on kdz.i resolved my problem by just searching around the forums and google .good luck!!!
Sent from my O1
Like what should I search for
I never used kdz
Sent from my LG-P509 using XDA App
BlackRose 22 said:
Like what should I search for
I never used kdz
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Do this... Download this and copy into ur sdcard http://www.multiupload.com/D6DIX9FTDE then go ROM Manager, Press flash recovery... Then reboot... Flash the zip up there... Then u try again... Do give feedback, if the fastboot gone, press the thanks button will do...
Sent from LGE XDA phone
I'm stuck at that screen when I turn my phone on it goes to that screen so how I'm I going to use rom manger
Sent from my LG-P509 using XDA App
BlackRose 22 said:
I'm stuck at that screen when I turn my phone on it goes to that screen so how I'm I going to use rom manger
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Go here. And DO NOT use ROM manager. It has a lot of issues. Kick it out of your phone and never return to it.
Thanks
Sent from my LG-P509 using XDA App
BlackRose 22 said:
Thanks
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
You're welcome. If it works out for you, then update the thread title with the tag [SOLVED] and also add the thread link, which I provided you, to the first post, so that it would be useful for other members who may face the same problem.
Thanks!
So what. Do you use or do to get the latest cwm recovery? ??
gkarthik16 said:
You're welcome. If it works out for you, then update the thread title with the tag [SOLVED] and also add the thread link, which I provided you, to the first post, so that it would be useful for other members who may face the same problem.
Thanks!
Click to expand...
Click to collapse
LG O1 Running Cm7 Mik_OS 2.35
BlackRose 22 said:
So what. Do you use or do to get the latest cwm recovery? ??
LG O1 Running Cm7 Mik_OS 2.35
Click to expand...
Click to collapse
You can flash the latest CWM through ROM manager but as I told earlier, it has some issues. The other way is go to http://www.clockworkmod.com/recovery_images.html and download the recovery for your phone and flash it through your current recovery.
Thanks again do you have to upgrade to keep using cwm
gkarthik16 said:
You can flash the latest CWM through ROM manager but as I told earlier, it has some issues. The other way is go to http://www.clockworkmod.com/recovery_images.html and download the recovery for your phone and flash it through your current recovery.
Click to expand...
Click to collapse
LG O1 Running Cm7 Mik_OS 2.35
after updating rom manager to 5.0 my phone stucks on lg logo when i restarted it into recovery mode...
i tried to get into recovery mode manually..but only lg logo appears..
now i only seen is the lg logo..not flash recovery nothing..
please anyone here provide me the link how to get it back it in wroking condition..
ur help will be really appericiated...
thanks
BlackRose 22 said:
Thanks again do you have to upgrade to keep using cwm
LG O1 Running Cm7 Mik_OS 2.35
Click to expand...
Click to collapse
It's not necessary. You can use the current version if you want. But it is always better to have the latest and greatest version right?
---------- Post added at 01:36 AM ---------- Previous post was at 01:30 AM ----------
bullet_freak said:
after updating rom manager to 5.0 my phone stucks on lg logo when i restarted it into recovery mode...
i tried to get into recovery mode manually..but only lg logo appears..
now i only seen is the lg logo..not flash recovery nothing..
please anyone here provide me the link how to get it back it in wroking condition..
ur help will be really appericiated...
thanks
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=883314
And one important advice: This has been repeated this in many threads and many people have faced this issue. When you use ROM manager to flash something, it messes up and you get stuck on the LG logo. Never use ROM manager. If you've successfully installed some recovery through ROM manager and nothing got messed up, then consider yourself lucky and uninstall ROM manager and never use it again. Because, you can always flash anything through the recovery and even install another recovery through a recovery (like updating a CWM recovery from 3.0.1.0 to 5.0.2.0 or flash AmonRa recovery using CWM recovery).
I was not lucky my first time and I faced the same issue as yours. And I revived my phone by that thread only. All the best!
Please avoid the use of ROM Manager to install recoveries, sometimes it just screws everything, also prefer TWRP recovery instead of buggy CWM or outdated AmonRA....
TWRP without a doubt the best recovery for our phone,....
gkarthik16 said:
It's not necessary. You can use the current version if you want. But it is always better to have the latest and greatest version right?
---------- Post added at 01:36 AM ---------- Previous post was at 01:30 AM ----------
Go here: http://forum.xda-developers.com/showthread.php?t=883314
And one important advice: This has been repeated this in many threads and many people have faced this issue. When you use ROM manager to flash something, it messes up and you get stuck on the LG logo. Never use ROM manager. If you've successfully installed some recovery through ROM manager and nothing got messed up, then consider yourself lucky and uninstall ROM manager and never use it again. Because, you can always flash anything through the recovery and even install another recovery through a recovery (like updating a CWM recovery from 3.0.1.0 to 5.0.2.0 or flash AmonRa recovery using CWM recovery).
I was not lucky my first time and I faced the same issue as yours. And I revived my phone by that thread only. All the best!
Click to expand...
Click to collapse
+1 thanks...it really worked.! )
bullet_freak said:
+1 thanks...it really worked.! )
Click to expand...
Click to collapse
Glad that it worked for you. Now get rid of that buggy ROM manager.
Don't you rename it. Zip for the recovery if it is not???
LG O1 Running Cm7 Mik_OS 2.35
Hey I tried to flash cwm and all I got was can't find find file then bad then installation aborted
gkarthik16 said:
Glad that it worked for you. Now get rid of that buggy ROM manager.
Click to expand...
Click to collapse
LG O1 Running Cm7 Mik_OS 2.35
BlackRose 22 said:
Hey I tried to flash cwm and all I got was can't find find file then bad then installation aborted
LG O1 Running Cm7 Mik_OS 2.35
Click to expand...
Click to collapse
Try using TWRP instead of CWM... you wont regret
http://www.multiupload.com/9NEJW2ZYPA

[Q] Phone not starting up

Hey friends,
i first installed official Gingerbread 2.3.3 using KDZ and then installed Mik's rom. as GSM data wasn't working, i installed 2.2 using KDZ and not able to root it using zroot and superoneclick. then i tried to install 2.2.2 using KDZ but got error 4008 first time, tried again then got error 1002. so switched off the phone and not able to start since then. What should i do now??? plz help, as i am not at my home town, i cant give my cell to LG service center up to 25th Sept
hannibal3454 said:
Hey friends,
i first installed official Gingerbread 2.3.3 using KDZ and then installed Mik's rom. as GSM data wasn't working, i installed 2.2 using KDZ and not able to root it using zroot and superoneclick. then i tried to install 2.2.2 using KDZ but got error 4008 first time, tried again then got error 1002. so switched off the phone and not able to start since then. What should i do now??? plz help, as i am not at my home town, i cant give my cell to LG service center up to 25th Sept
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883314 TRY THIS
USE GINGERBREAK TO ROOT IT WORKS LIKE CHARM
thanks for reply, i tried everything, now not able to power on the phone. so i cant use gingerbreak
hannibal3454 said:
thanks for reply, i tried everything, now not able to power on the phone. so i cant use gingerbreak
Click to expand...
Click to collapse
Power+up+home... Can u boot to emergency mode? If can, u just flash through kdz, then root it with superoneclick...
Sent from LGE XDA phone
no, i am not able to power on by using any combination known to me including emergency and recovery.
hannibal3454 said:
no, i am not able to power on by using any combination known to me including emergency and recovery.
Click to expand...
Click to collapse
Wad? Have u tried charging it?
Sent from LGE XDA phone
hannibal3454 said:
no, i am not able to power on by using any combination known to me including emergency and recovery.
Click to expand...
Click to collapse
Its time to take it to lg service i believe if u have tried evrything
yes i tried almost everything. now its time to give it to LG Service. just want to know whether it will be covered in warranty or not.
If you cant turn on your phone holding power so dont worry about warranty.
Sent from my LG-P500 using xda premium
mastershefis said:
If you cant turn on your phone holding power so dont worry about warranty.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
mean it will be covered
Gave my cell to LG Service Center, they will change motherboard
is this mean processor will also get change?
No.
Sent from my LG-P500 using XDA App

[Q] My s2 is bricked !!!!

I have installed the official samsung ics rom and rooted by flashing superuser in the recovery mode. using rom toolbox i have installed a font after installing my phone doesnt shows font and restarts frequently. i then moved to recovery mode and formatted the system and factory data. Now i cant get either into recovery mode or download mode. my doesnt shows the charging battery icon too. I'm confused. PLSSSSSSS Suggest !!!!!!!!!!!!
Try a USB Jig. That might help.
vikirevenger said:
I have installed the official samsung ics rom and rooted by flashing superuser in the recovery mode. using rom toolbox i have installed a font after installing my phone doesnt shows font and restarts frequently. i then moved to recovery mode and formatted the system and factory data. Now i cant get either into recovery mode or download mode. my doesnt shows the charging battery icon too. I'm confused. PLSSSSSSS Suggest !!!!!!!!!!!!
Click to expand...
Click to collapse
If you were on stock kernel then you've properly bricked it, only a board replacement or a new phone is gunna help here.
Adarzannh said:
If you were on stock kernel then you've properly bricked it, only a board replacement or a new phone is gunna help here.
Click to expand...
Click to collapse
Or a JTAG repairment.
vikirevenger said:
I have installed the official samsung ics rom and rooted by flashing superuser in the recovery mode. using rom toolbox i have installed a font after installing my phone doesnt shows font and restarts frequently. i then moved to recovery mode and formatted the system and factory data. Now i cant get either into recovery mode or download mode. my doesnt shows the charging battery icon too. I'm confused. PLSSSSSSS Suggest !!!!!!!!!!!!
Click to expand...
Click to collapse
Did you use 4.0.4 when you did factory reset?
Sent from my GT-I9100 using xda app-developers app
Adarzannh said:
If you were on stock kernel then you've properly bricked it, only a board replacement or a new phone is gunna help here.
Click to expand...
Click to collapse
Try using a Jig first. If that fails then it's probably (super) bricked and there's nothing you can do about it other than what Adarzannh suggested. Search mmc super brick bug.
Varcolac said:
Did you use 4.0.4 when you did factory reset?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yeah i used 4.04 with stock kernel.
Girghe said:
Try using a Jig first. If that fails then it's probably (super) bricked and there's nothing you can do about it other than what Adarzannh suggested. Search mmc super brick bug.
Click to expand...
Click to collapse
Sure. i have ordered usb jib. I'll try it soon. but when i put the battery the phone gets heating up. Thanks for the reply.
IF you still have warranty.. then just put it there.. it's samsung fault.. they should fix it for free!
vikirevenger said:
Yeah i used 4.04 with stock kernel.
Click to expand...
Click to collapse
If you use 4.0.4 and did a factory reset, im afraid your phone is hard bricked. The only I think is sending it to Samsung or JTag
Sent from my GT-I9100 using xda app-developers app
preseodymium said:
If you use 4.0.4 and did a factory reset, im afraid your phone is hard bricked. The only I think is sending it to Samsung or JTag
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Jtag doesnt work with this particular kind of brick. Only a board replacement.
Sent from my deep fried potato
preseodymium said:
If you use 4.0.4 and did a factory reset, im afraid your phone is hard bricked. The only I think is sending it to Samsung or JTag
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I have planned to go to a samsung service centre.
And if you get a free repair,when you get the phone back,make sure you flash a custom kernel like siyah so theres less chance of bricking it again.

[Q] LG optimus black p970 completely bricked and dead after security error

I got a LG optimus black p970 running on official ICS 4.0.1(europe ver), and i was preparing to update it to jelly bean 4.2.2 cm10.1.
so, all i have to do the steps i read in a thread of xda developers.
So, i got all the necessary files and tools for it.
So, i rooted my phone. Installed clockworldmod recovery, and after that i restarted in clockworldmod recovery.
But that was my bad luck, i wasn't aware of that boot loader locking in official ICS ROM.
So,the boot loader locked and everytime i start my phone it shows LG security error.
That was less bad, after that i did the blunder.
I connected my phone to pc in s/w upgrading mode using Smart Flash Tool and erased entire AP and AP(user data).
and after that my phone never started again.
No s/w upgrade mode, No security error screen!!
So, i guess i had cleared the ROM memory, and the boot loader too. So, i guess my phone has no software to communicate with hardware.
Wot to do now??
plz help me.. i love my phone so much...
i am sure that the hardware of my phone is not damaged at all. It was running perfect.
Plzz HELP ASAP...!!
Aum11kt said:
I got a LG optimus black p970 running on official ICS 4.0.1(europe ver), and i was preparing to update it to jelly bean 4.2.2 cm10.1.
so, all i have to do the steps i read in a thread of xda developers.
So, i got all the necessary files and tools for it.
So, i rooted my phone. Installed clockworldmod recovery, and after that i restarted in clockworldmod recovery.
But that was my bad luck, i wasn't aware of that boot loader locking in official ICS ROM.
So,the boot loader locked and everytime i start my phone it shows LG security error.
That was less bad, after that i did the blunder.
I connected my phone to pc in s/w upgrading mode using Smart Flash Tool and erased entire AP and AP(user data).
and after that my phone never started again.
No s/w upgrade mode, No security error screen!!
So, i guess i had cleared the ROM memory, and the boot loader too. So, i guess my phone has no software to communicate with hardware.
Wot to do now??
plz help me.. i love my phone so much...
i am sure that the hardware of my phone is not damaged at all. It was running perfect.
Plzz HELP ASAP...!!
Click to expand...
Click to collapse
Go to the lg service center. That's the only way sadly
Sent from my Micromax A87 using xda premium
Can you able to boot in recovery mode?
If yes so you can flash a Rom from external SD carx
Sent from my LG Optimus 4X-HD using xda premium
akshay.mehta9 said:
Can you able to boot in recovery mode?
If yes so you can flash a Rom from external SD carx
Sent from my LG Optimus 4X-HD using xda premium
Click to expand...
Click to collapse
No.. if i was able to boot in recovery, den there was no problem...
is dere any way to push the bootloader into the phone again by using BOX or somewhat else??
Aum11kt said:
No.. if i was able to boot in recovery, den there was no problem...
is dere any way to push the bootloader into the phone again by using BOX or somewhat else??
Click to expand...
Click to collapse
Really critical
Search In LG optimus black forum or Google
If you don't find any solution then go to LG service center
Sent from my LG-P880 using xda premium

Categories

Resources