Related
Hi everyone,
Do iPad accessories (cases and covers specifically) fit the gtab? I was looking at this:
I can't post an outside link yet but slickdeals has a $5 case for the ipad and I like it
Thanks!
iPad is:
9.56 in (243 mm) (h)
7.47 in (190 mm) (w)
.5 in (13 mm) (d)
G Tablet is: 10.5 in 6.8 in 0.6 in
So, I'd say no, the iPad case would not be big enough in the long direction or in the width.
And, questions go in the Q & A forum.
The gTab is bigger so the answer is no.
To the original poster:
Did you notice there is a whole forum on here about Accessories?
There's a whole ton of stuff like this there.
Needs to be posted there.
Rev
Didn't notice and thanks guys
The size is not the same, so , I'd say no. the case or cover for iPad is not so big. Of course, you can get a customize case for your tab.
Hey~ I just brought a gtablet from woot last week~ it is cool~
1. now I want to buy a case for it? so which case most of you are using now? and where I can buy it?
2. I want to buy a keyboard too...and now I am using the rom TNT Lite 4.4.0~ so which keyboard can be supported by this rom (including the usb keyboard and Bluetooth keyboard)? and where I can buy it?
thank you very much!!!
You can read up on this thread for info about several custom cases for our gTabs.
http://forum.xda-developers.com/showthread.php?t=1013799
And then go to Steve's web store at http://www.electroniccrap.com and see if he has them in stock to order. I would suggest you get on his mailing list there so you will know when he's got new stock coming in.
As for keyboards, there are several that work. About any usb keyboard will work but certain bluetooth keyboards require extra software sometimes to connect.
Take a moment and use the SEARCH feature of this accessories section and you will find all the information you are wanting for this.
At the moment I am using the CLIP case and love it.
http://forum.xda-developers.com/showthread.php?t=1015853
I also did a video review of it.
hey ~ thanks! where you brought it? from ebay?http://cgi.ebay.com/10inch-Case-USB-keyboard-Viewsonic-Gtablet-10-/320670632482?pt=LH_DefaultDomain_0&hash=item4aa9758a22#ht_4875wt_905
???
another question, whether this case can grasp gtablet tightly??? I means that is it easy to slide out of the case?
savage0 said:
hey ~ thanks! where you brought it? from ebay?http://cgi.ebay.com/10inch-Case-USB-keyboard-Viewsonic-Gtablet-10-/320670632482?pt=LH_DefaultDomain_0&hash=item4aa9758a22#ht_4875wt_905
???
Click to expand...
Click to collapse
Do not buy the case in your eBay link. I've had one before and it is a piece of junk. While does work, it looks and feels really cheap and doesn't hold the gTab securely at all and let's it slide around a lot.
savage0 said:
another question, whether this case can grasp gtablet tightly??? I means that is it easy to slide out of the case?
Click to expand...
Click to collapse
If you're asking about the CLIP case I mentioned in my earlier post then the answer is yes. It holds the gTab very securely.
If you're asking about the usb keyboard case in your first post then no. It lets the gTab slide around a lot.
sjmoreno said:
Do not buy the case in your eBay link. I've had one before and it is a piece of junk. While does work, it looks and feels really cheap and doesn't hold the gTab securely at all and let's it slide around a lot.
Click to expand...
Click to collapse
Well, the holding pieces are made of metal. So, you can bend it until it fits your gtab. You don't want it too tight either or you can't take it out. You need to find your happy medium.
You know why it feels really cheap? Because it is really cheap. For some of us, it works just fine. I go back and forth between a lab and my home. I don't need something that looks like a $300 case to impress anyone.
But again, if it doesn't fit your gtab, all you need to do is bend the metal pieces until it fits. Be creative, man. Isn't that the spirit of modding?
goodintentions said:
Well, the holding pieces are made of metal. So, you can bend it until it fits your gtab. You don't want it too tight either or you can't take it out. You need to find your happy medium.
You know why it feels really cheap? Because it is really cheap. For some of us, it works just fine. I go back and forth between a lab and my home. I don't need something that looks like a $300 case to impress anyone.
But again, if it doesn't fit your gtab, all you need to do is bend the metal pieces until it fits. Be creative, man. Isn't that the spirit of modding?
Click to expand...
Click to collapse
If you get lucky and receive the one that has the left tab moved down so it doesn't block the usb port then sure you can bend the metal to make it hold a little bit better but not much better. Most of the people that have ordered this case from eBay or another site get the one that you have to remove the left tab to access the usb port so there's nothing there to tighten up.
I don't need a $300 case either. I'm pretty happy with a $45 case I got from it2steve's web store.
Amazon was selling them (gtab case with keyboard) but ran out. I spent way to much time, but found the Manufacturer in Chine. They have fixed the tab possitions. Now the left tab is about the center of the gtab, and the other one is on top. They sell for $24.95 with free shipping. Note that it may take up to 30 days go get it:
http //witglobal com/goods-2286-10inch+Case+with+integrated+USB+keyboard+for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Sorry, you will have to add a : and a . to the above url to make it work (I can't post links yet).
If you poke around on their site, you will find that they are still selling the ones that have the left tab up high for $14. I figured I could easily move the tab (I've see several posts about doing this), so I was going to order two of the $14 ones until I found that the shipping was not free. So I ended up ordered the one with the corrected tabs. Will see how long it takes to arrive.
goodintentions :
great review thanks! btw, where did u get that wallpaper?
sjmoreno said:
If you get lucky and receive the one that has the left tab moved down so it doesn't block the usb port then sure you can bend the metal to make it hold a little bit better but not much better. Most of the people that have ordered this case from eBay or another site get the one that you have to remove the left tab to access the usb port so there's nothing there to tighten up.
Click to expand...
Click to collapse
Some of them were made for another tablet, so I'll give you that point about the tab not being in the right place. But your original criticism was about the gtab not fitting nice and tight in the case. My post was a response to that point and that point alone. The tabs are made of metal, so instead of throwing your hands up in the air and cry out "o lord o lord why hast thou abandoned me!?" you could have been a little creative and bend the metal tabs to your liking. Again, being creative is exactly what the modding community is about. 5 seconds to bend the metal tabs too long and hard work for you?
completetech said:
goodintentions :
great review thanks! btw, where did u get that wallpaper?
Click to expand...
Click to collapse
Google image something like "android eating apple blood".
thank you! I saw the website which you sent~ and it seem that there are still some problem with the right one(24.99$)~----there is still no tabs in the right edge of the case~ so the gtablet maybe slide out from the right side~~~
t5800512 said:
Amazon was selling them (gtab case with keyboard) but ran out. I spent way to much time, but found the Manufacturer in Chine. They have fixed the tab possitions. Now the left tab is about the center of the gtab, and the other one is on top. They sell for $24.95 with free shipping. Note that it may take up to 30 days go get it:
http //witglobal com/goods-2286-10inch+Case+with+integrated+USB+keyboard+for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Sorry, you will have to add a : and a . to the above url to make it work (I can't post links yet).
If you poke around on their site, you will find that they are still selling the ones that have the left tab up high for $14. I figured I could easily move the tab (I've see several posts about doing this), so I was going to order two of the $14 ones until I found that the shipping was not free. So I ended up ordered the one with the corrected tabs. Will see how long it takes to arrive.
Click to expand...
Click to collapse
savage0 said:
thank you! I saw the website which you sent~ and it seem that there are still some problem with the right one(24.99$)~----there is still no tabs in the right edge of the case~ so the gtablet maybe slide out from the right side~~~
Click to expand...
Click to collapse
If they put a tab on the right side, how are you going to slide it in?
hey! has anyone able to find any nice leather cases for the TF201 that would also allow keyboard docking?? i found a few nice cases but they all specifically say (This Case is NOT Compatible with Keyboard / Dock)
spex714 said:
hey! has anyone able to find any nice leather cases for the TF201 that would also allow keyboard docking?? i found a few nice cases but they all specifically say (This Case is NOT Compatible with Keyboard / Dock)
Click to expand...
Click to collapse
Someone here posted a bunch of links, in those links I found a "nice" pad/keyboard case, but guess what, I can't friggin find it now, but I am looking. Will post back once I find it, good news is, there is one out there now. I am in here searching for it now, have my prime, now I need a case.
this case is exactly what im looking for! except its for the TF101
http://www.amazon.com/Tuff-Luv-Veggie-Leather-Keyboard-Transformer/dp/B005965US2/ref=pd_cp_e_1
hopefully they come out with a TF201 version
spex714 said:
this case is exactly what im looking for! except its for the TF101
http://www.amazon.com/Tuff-Luv-Veggie-Leather-Keyboard-Transformer/dp/B005965US2/ref=pd_cp_e_1
hopefully they come out with a TF201 version
Click to expand...
Click to collapse
UG, that looks like the one I found, same thing I am looking for, if I find one for the Prime, will post and let you know.
---------- Post added at 09:00 PM ---------- Previous post was at 08:55 PM ----------
>> Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/showpost.php?p=20013463&postcount=1
http://forum.xda-developers.com/showpost.php?p=20013463&postcount=1
+1 would like one of these for the tf201 as well
I'm also looking for something like this
Bookmarked this thread, if I ever find one I'll post a link.
I emaile Tuff-Luv asking if they would release a case that is compatible with both the keyboard and dock. They replied saying they will be releasing their line of cases in Feb of 2012, so hopefully they will release a nice case by then!
spex714 said:
I emaile Tuff-Luv asking if they would release a case that is compatible with both the keyboard and dock. They replied saying they will be releasing their line of cases in Feb of 2012, so hopefully they will release a nice case by then!
Click to expand...
Click to collapse
Thanks for the update, looking forward to their release.
Wow, this is pretty slick looking. I might pick one up in Feb. Until then I am just going to use a neoprene case to carry it around like a laptop and use it naked when I take it out.
I thought I saw in another thread someone say there is very little clearance between the keyboard and the screen when it is closed. I wonder how a case like this will work if that's true.
You need to un-dock the keyboard.
wwwamazoncom /MiniSuit-ASUS-Transformer-Keyboard-Portfolio/dp/B006ULQPTI/ref=pd_rhf_se_p_t_3
Its available for pre-order on amazon. add the periods and delete the space after .com
But it will not be able to close properly with that Tuff-lov thing...?
There's leather on top of the keyboard dock and alson on the front of the tablet.. So thats 2 x leather layer when trying to close the thing.. it cannot be healthy for the dock hinge....
I think I've seen the Case Logic case asked about or maybe even shown somewhere else but I can't find it (I've searched, no luck). SO I'm hoping this might be a good place to post pics, at least it's on topic (except it's not leather).
I've seen this online but I stumble across at Walmart so had to check it out knowing I could easily return it. I is a semi-hard sided case that will hold the tablet and dock when they are connected (or if they are not, just be careful where the hinge is on the dock when you close the case if its' not connected).
I like it. It's growing on me. It offers a lot of versatility. At first I thought wth am I going to do with the dock when I only want to use the tablet (where am I going to store it or put it if I'm traveling or at a friends, etc) but quickly found it kinda just stashes away on it own within the case. Problem solved!
My opinions, fwiw:
Pros -
*cost $25
*durable, rugged
*really good fit
* soft lining, extra padding behind the tablet
*presents well ( easily walk into any meeting or class room with this)
*while it's not technically a portfolio, there is room for some note paper and my stylus fit in there in a little spot on top and the mettle never hit any of the metal on the tablet or dock
*neoprene cover does just *barely* wraps around it if I want added cushion
*versatile viewing angles
*can keep dock in the case detached from tablet and still use tablet with case
*you can leave the top straps on and attached to the top corners of the tablet when you close the case - it's not putting any pressure on the dock hinge at all, it adds a little more cushion between the two units, plus it fills up the space within the case a little more
Cons -
*the strap on the top left corner WILL hit the volume rocker.
*takes a bit of fooling around with the middle velcro part to see how and where it will work with the hinge, but it's worth the little extra time so it doesn't get messed up later
*be careful if you've detached the dock and try to close the case with the units separated - the hinge needs to be in the right place or we might risk breaking it or scratch the glass - maybe not but I wouldn't want to force it or risk it.
*it adds significant overall weight. I don't have a scale that will measure it , but it is heavier. That being said, I may not to drop it from my 3rd story balcony, but I feel pretty safe with it withstanding most common impacts and injuries. If I took the time to add another thin cushion later I am fairly certain it would withstand any fall from counter or waist height
whats the name of the case logic case?
It's this one I think (or very very similar):
http://www.amazon.com/Case-Logic-ETC-110-10-Inch-Tablet/dp/B004XANKWI
I got it at Walmart for $25.
The biggest pro to this one is that it will securely hold both tablet and dock. I'm glad I have it, I wont be returning it, it will serve it's purpose when I need a case like this. At home, I'm very careful. Now I know I can take both with me and they will have a safe home, too
650hpAMG said:
Thanks for the update, looking forward to their release.
Click to expand...
Click to collapse
I just got my mini suit case or the prime. It fits well and works with the dock and with out the dock. I will post back with any gripes or comments once ive given it more of a chance.
Sent from my Transformer Prime TF201
I've got this on pre order
http://www.amazon.com/gp/product/B006ULQPTI/ref=oh_o00_s00_i00_details
Covers both
Found one seller on EBAY
Found one seller on EBAY...
http://www.ebay.com/itm/Keyborad-Leather-Cover-Case-Pouch-Skin-Asus-EeePad-Transformer-2-Prime-TF201-/160726484419?pt=AU_TabletAccessories&hash=item256c0b85c3
FWIW
I have the Transformer Prime with keyboard, and just got the mini suit case. I like it, for the most part. The leather feel is much nicer than the other brands I've seen. And it's really cool how it covers both the Prime and the dock, yet will come apart (with a couple of snaps) when you don't want to bring the dock along. The only thing that bugs me is the sloppiness of the cover without the dock. It's like a book with a very old, very loose, sloppy binding. I'm not sure I like that, and may decide to pick up one of the cheaper covers to use when I'm not planning to have the dock with me.
I have a question too, about the dock. Is there a forward delete key? Or a hot key that works to delete forward instead of backspacing? That missing function has bugged me since I first discovered Android! Just sayin'...
imb951 said:
+1 would like one of these for the tf201 as well
Click to expand...
Click to collapse
I just found this on Amazon: http://www.amazon.com/MiniSuit-ASUS-Transformer-Keyboard-Portfolio/dp/B006ULQPTI/ref=pd_cp_e_0
http://www.amazon.co.uk/dp/B005HI4FPG
does anyone have this case? from what I can tell, the tab goes one side, the keyboard dock the other and it's a hard shell carry case.
however, nowhere to put your cables.
does anyone know of a similar case to this but with an pouch as well for cables? I know it's a TF101 case, b ut considering the prime is a small item it will fit this case easy.
I am looking at this case as well as I read about the reviews on the office transleeve having all the problems with the tablet and the lack of availability online. From the pictures on amazon it seems that its quite thin to carry around. I read a review somewhere maybe from it official website saying that this can carry a dock with the transformer so i assume this is okay.
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
js931 said:
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
Click to expand...
Click to collapse
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
air-wave said:
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
Click to expand...
Click to collapse
of course its thicker, its not a neoprene sleeve. but thats why it protects well and you can still easily carry it with one hand! i really like it. didnt expect much for the price and was pleasantly surprised!
i also ordered a 10'' netbook case from case logic to compare, but the prime has too much room in it and its more of a thin neoprene, so its just scratch-protection...
I bought this hard case:
eBay - The UK's Online Marketplace
Internal dimensions now that I have it in my hand are:
Case: 26.8cm x 19.1cm x 3-4cm
Prime: 26.3cm x 18.1cm x 2cm
As you can see, it's a pretty close fit in theory. Have to wait 5 days before I get my Prime to confirm it's a good fit.
Alternatives to consider
Hey guys,
just like everyone else, looking for a proper case for my prime
since eventually (in the near future) I plan on getting the Dock, i'm looking for a case/sleeve
- looked at all the cased and couldn't find one I liked
- Finally found a case, but haven't had a chance to try it yet
it's the HP VX403AA / VX404AA it's a mini neoprene sleeve for the HP Mini netbook
- price is 32$ as low as I could find it. pricey but nice
- Has 2 smaller pockets on one side and a big one on the other side
- Plenty of storage to keep the charging cable/charger/micro USB with the tablet wherever you go.
- I'll let you know how it fits as soon as I try it, you can find it in local BestBuy's so if any1 is interested in trying it out before I get to it, by all means post your results.
Thank you,
Rodi
lancer3397 said:
however, nowhere to put your cables.
Click to expand...
Click to collapse
It looks like there is a pocket on the inside of the cover.
I ordered this iGadgitz case. Hope to get it next week. I will post some pictures when I have it.
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
UrbanDroid said:
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
Click to expand...
Click to collapse
Could you post a link?
This is a great case, my prime and dock lives in it when I'm not using it. It fits snug and feels well protected. There is a mesh Pocket inside which I justuse to keep the screen cloth, but you could easily fit a USB cable in.
Sent from my Transformer Prime TF201 using Tapatalk
Is there any good case to use with the whole setup (tab + keyboard) that could ALSO be used as a stand for the tablet only?
You can find them if you look around.
I found this one on eBay in like 2 seconds:
http://www.ebay.com/itm/New-Folio-L...?pt=US_Tablet_Accessories&hash=item256d7e4fba
I believe there might be other, similar cases listed in the "Ultimate Transformer PRIME TF201 Accessory Guide" pinned to the top of the forum. I don't know how "good" they are as this isn't really my style of case, but hey generally aren't expensive.
Thanks. Of course I could do a search, but my intention was finding a case that someone actually had bought and had, preferably, good experiences with.
Here's a new case for tablet and dock. Looks kinda better than the rest I think
amazon.com/Transformer-Keyboard-BLACK-Protector-SecondShells/dp/B007A12R80/ref=sr_1_13?s=electronics&ie=UTF8&qid=1330591122&sr=1-13
If you are looking for reviews of cases you should really read the accessories guide posted at the top of the page. Most people posted reviews of the stuff they added to the list.
Thunder.Lion said:
Here's a new case for tablet and dock. Looks kinda better than the rest I think
amazon.com/Transformer-Keyboard-BLACK-Protector-SecondShells/dp/B007A12R80/ref=sr_1_13?s=electronics&ie=UTF8&qid=1330591122&sr=1-13
Click to expand...
Click to collapse
Thanks for the link. I agree that case looks better then the other ones I was looking at. Just ordered for my prime can't wait to try it out.
Correct me if I'm wrong, but from the pictures of the SecondShells case linked above doesn't look like you can separate the covers to have a stand alone case for the undocked tablet. Just wondering.