so, i just got this phone about a week ago, and its already seen several near death experiences with all the flashing ive been doing. but this one takes the cake. all i did was put the phone in my back pocket, with the screen facing in, sat down for half a second, and when i took it out, the screen had been pressed so hard that the top layer of the resistive screen was stuck to the bottm, and not registering anything. i knew the first step to fixing it was getting it unstuck. but it still wounldnt work. did a hard reset. and now im stuck at my initial tap screen to set up phone screen, and i cant do anything. this is clearly a hardware problem. can anyone help me out?
lemme be the first to say it man, ouch lol
sorry about your screen, i fear the only way to fix would be to find another screen assembly, if you search the threads for the cdma raphael(herman) i beleive there is a detailed teardown of the phone that may or may not help you resolve your problem. here is a quick link to something along the lines of what your looking for but not really too detailed : http://www.ifixit.com/Teardown/HTC-Touch-Pro/787/1
ive done that, but usually break the screen completely. i have an extra us cellular tp that has a bad keyboard and front panel buttons but screen and touch works. i just use it as a extra battery charger. has some scratches, but works. ill send it to you if you send me your old one. the screen has a double-stick tape that holds it to the frame around the edges. let me know if your able to tear it down and think you can put it back together again. its a pretty straight forward process though.
Apply packing tape to the screen and pull as hard as you can.
Related
I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
Hello everyone. A few months ago, my phone screen broke, and I replaced it. Ever since then, my digitizer has been funky. When I turn my phone on the top half of the screen is static and the bottom half is black. It shows a bunch of moving parts (the boot animation) then goes black. It also prohibits me from using Amon Ra which is my favorite recovery because the whole thing is static. When I press the power button after the boot animation, my homescreen is on & my phone is fine. I broke my screen again (don't judge me lol I see you looking at me with that face ) and instead of putting ANOTHER screen on, I bought both the screen and digitizer already put together. So last night I lost all touch capabilities of my digitizer, when I did swype it did the mark of satan by itself (possessed rezound?) and overall was just terrible. I opened it up, cleaned up the ribbon, put it back, and 95% of touch worked. Did the same thing today and 100% works, however, I still get the weird static-turn-on thing. I assume it's the ribbon port for the digitizer..so my question is, is it possible to clean that? I was thinking with a really soft toothbrush w/ alcohol on it but I don't wanna ruin my phone for good. Thanks in advance
ParagonXI said:
Hello everyone. A few months ago, my phone screen broke, and I replaced it. Ever since then, my digitizer has been funky. When I turn my phone on the top half of the screen is static and the bottom half is black. It shows a bunch of moving parts (the boot animation) then goes black. It also prohibits me from using Amon Ra which is my favorite recovery because the whole thing is static. When I press the power button after the boot animation, my homescreen is on & my phone is fine. I broke my screen again (don't judge me lol I see you looking at me with that face ) and instead of putting ANOTHER screen on, I bought both the screen and digitizer already put together. So last night I lost all touch capabilities of my digitizer, when I did swype it did the mark of satan by itself (possessed rezound?) and overall was just terrible. I opened it up, cleaned up the ribbon, put it back, and 95% of touch worked. Did the same thing today and 100% works, however, I still get the weird static-turn-on thing. I assume it's the ribbon port for the digitizer..so my question is, is it possible to clean that? I was thinking with a really soft toothbrush w/ alcohol on it but I don't wanna ruin my phone for good. Thanks in advance
Click to expand...
Click to collapse
Use what i do for computers. Take a new pencil, never used eraser, and use the eraser to clean the connectors. take q-tip with alcohol. brush across it, and fan it dry. about 2 minutes is good. Alcohol dries pretty quick. Hopefully this works for you.
I have been having some problems as well. I replaced the digitizer myself and the phone boots up completely fine and normal. I just have some "dead" spots on the digitizer which I cannot seem to calibrate. I have tried apps and everything. Is there anything I can flash through recovery?
Has anyone come up with a fix for this?
Thanks in advance.
My wife dropped her S3 and broke part of her digitizer so I knew I had to replace it. I found one on ebay and it was delivered days later. First thing was hooking the screen up for testing before pulling the phone completely apart. With screen attached the phone boots up success the touch screen works. I shut the phone down, pull it apart, remove broken screen, attach new screen and reassemble...Phone boots and looks great but now the touch screen doesn't respond!!!
WTF is going on?! I tested the thing before hand. Used a hair dryer so there wasn't any excess heat and used kitten gloves during assembly.
Any idea what I can do to get the touch screen to start working again?
TLR - Tested digitizer before installing after installation complete touch screen doesn't work.
the only possible answer you're gonna get is that you did something wrong. and there's no way for us to know what. so try again
Long story short, cracked the hell outta my screen, ordered a stock replacement off amazon for like $20. I followed the instructions, got the screen on, looks great, everything seemed to go fine. Booted up, couldn't pull the lock ring. The captive buttons also do not work. Only like the top 50% of the screen works and its real twitchy if anything. I have taken this apart about 10 times already, re did the connections, even threw my broken screen back on. Moving it around barely touching the digitizer I was able to get the whole screen to work perfectly fine. As soon as I moved it and or seated it properly into the bezel, back to barely working at all. At this point I cant do much of anything with the phone. I am S-ON, rooted, rom'd, TWRP. Anyone have any ideas? I knew I should have just left it broken...:crying: Anyways, this voided my warrenty by removing the sticker on the screw, Anything I can do? And or can I get back to stock, unrooted without the screen working to touch? Pretty mad! My upgrade is not until March and I love my rezound...dummy!
Hi, I just did this on my wife's rezound today, took half a day for me, I scratched the LCD at top, has a half inch line,:crying: the buttons at the bottom barely lights up, other than that everything works..all I can suggest to you is make sure the two flimsy little cables are put back PERFECT..I watched 3 how-to's on youtube also. Good luck
Just did mine today too. Luckily is went smoothly but it took me almost an hour with cleaning up the old glue/tape and putting more down. I think it may be a bad pinch in the ribbon cable though. Might need another hopefully not.
So, this thing drives me crazy...I've tried everything I knew and still nothing solved this problem.
I'm using HTC One. About 10 days ago weird things with touch started to happen. It seems that touch is partly unavailable/unresponsible on touch in one or two small areas. It seems to me like theres an empty place on my touch. Visualy is everything fine. Screen is crystal clear and has no damages or scratches. But I can't slide icons without troubles. Somwhere on 1/4 of screen, touch brakes briefly and I need another try to slide the icon. The same thing happens with status bar on the top of screen - I can slide it until that 1/4 part and it stops there and goes back. If I slide it quick with short move, it works fine, just slide alone over problematic area.
Also, few times I had that problem where screen works things on itself will. Makes pictures, or adds filters on Instagram, or, I don't know, just jumps around for few secons. Then, I lock the screen, then unlock it and usually that calm down the screen.
Also weird thing is that, when I want to send message, I can't reach "send" button in first try. I have to drop down writing sheet, than to touch the letters to put it in writing mode again, and then I can click the "send" button. On the same place where it was previously!
At first, I thought that plastic case or PVC protection is the problem, so I took off the protector from the screen. That solved problem for a bit. Then, I put back screen guard, and problem came back. After I totally rejected screen guard, problem is still here. I've tried to reset phone on factory, but that wasn't helpfull...
I forgot to state that I'm using Android 4.2.2 and this started to happen after that version update. I had no problem before.
So, now I'm here, as I don't know what else to do before I take this beauty to service. I just hope that this happens because of software bugs :crying:
Is there anyone who could help me? Have similar problem or know how to fix this?
In the meantime, I'll just hope that 4.3 will fix it themself... :fingers-crossed: