NOTICE: This isn't my work. I've just followed this thread http://forum.xda-developers.com/showthread.php?t=963162 to make it work on X8
All thanks goes to zdzihu for xrecovery and offline charging fix and to genyt and weissgold for their guide
For stock 2.1.1.A.0.6 firmware (don't work with custom roms):
Installation:
1. root phone
2. install Busybox
3. download xrecovery with offline charging.zip
4. extract archive to SD Card
5. with Root Explorer put extracted files to /system/bin
Or install latest xRecovery with FlashTool 0.2.8
For custom roms you also need the files in /system/etc/semc/chargemon/ from stock ROM.
ponanovn said:
For custom roms you also need the files in /system/etc/semc/chargemon/ from stock ROM.
Click to expand...
Click to collapse
Thanks for advice, I'll try it.
Help! I have a problem. I copied files to "/ system / bin", and now does not work xrecovery. and when I turn on my mobile no applications are launched, the application has stopped unexpectedly
I have version 2.2.1 CM Floyd v0.15
please help!
sorry for my english
dbts25 said:
This is for stock 2.1.1.A.0.6 firmware!!!
Don't know if it works with older firmware or with custom roms
Click to expand...
Click to collapse
I said it in first post that it is for stock firmware. If you want it for floyo I can try to make it work too. You must reinstall firmware with SEUS or FlashTool and install Floyo again
daanieloow said:
Help! I have a problem. I copied files to "/ system / bin", and now does not work xrecovery. and when I turn on my mobile no applications are launched, the application has stopped unexpectedly
I have version 2.2.1 CM Floyd v0.15
please help!
sorry for my english
Click to expand...
Click to collapse
you should read the first post clearly mate
dbts25 said:
I said it in first post that it is for stock firmware. If you want it for floyo I can try to make it work too. You must reinstall firmware with SEUS or FlashTool and install Floyo again
Click to expand...
Click to collapse
thank you very much friend
just asking...does it makes stuck on boot?(offline charging for floyo 0.15)...sorry if i ask this thanks before mate...
progress : after installed my phone get force close all app...i use offline charging floyo 0.015 on my floyo
Don't know where is problem. For me it runs ok
i have follow the instruction clearly...or it should be install the xrecovery files first from the attachment(that seems x10 xrecovery..if i'm not wrong) and then copy those floyo offline charging files?...for you it runs ok,but not on my phone.so wierd isn't it?
Yes it is weird. You don't need to install xrecovery it is preinstalled in floyo. You only need to put chargemon and charger to /system/bin and semc folder to /system/etc
yep...that was i'm doin' as your instructions...twice i try and unsucsessfull,the x recovery can't runs when i pressing the back button on booting...
fully working on stock 2.1.1.A.0.6 THANKS!
I'm stock in sony ericsson logo..
Will this work on a CM7 2.3.3 ROM as well?
Roland
Rolandh said:
Will this work on a CM7 2.3.3 ROM as well?
Roland
Click to expand...
Click to collapse
No. In which one? I can try to make it work
dbts25 said:
No. In which one? I can try to make it work
Click to expand...
Click to collapse
I'm using jerpelea Gingerbread CM7 2.3.3 RC 2 v006a.
Roland
Related
How can I get the stock keyboard from the 2.1.1 rom or at least the input languages.
because the 2.3.3 doesn't include Arabic input
Update to the rc4 2.3.3 of racht it has Arabic
zousoum96 said:
Update to the rc4 2.3.3 of racht it has Arabic
Click to expand...
Click to collapse
Thanks, I read about that but it still need some fixing like the camera and i can't wait to try it, but is there any other way.
i think the stock one have it but i don't know how to add it.
thanks again.
Well I am not at stock so I can't search I will try in 0.15 and post again. Try something in system files
Ok see go to market and search android keyboard.u will see an app called Ibrahim Arabic keyboard instructions are in the description. Let me know if it worked when u install in.
zousoum96 said:
Ok see go to market and search android keyboard.u will see an app called Ibrahim Arabic keyboard instructions are in the description. Let me know if it worked when u install in.
Click to expand...
Click to collapse
I tried it, but still not like the stock and i think soft keyboard is better than the one u mentioned but the stock is better too.
thanks anyway, i shall keep trying.
zzsetozz said:
How can I get the stock keyboard from the 2.1.1 rom or at least the input languages.
because the 2.3.3 doesn't include Arabic input
Click to expand...
Click to collapse
Backup your 2.3.3 Install with xrecovery and flash your 2.1.1 Backup (presuming that you have done a backup of 2.1.1)
1. Search for the Keyboard.apk using Root Explorer
2. Copy the keyboard.apk file to you SD card
3. Re-store your 2.3.3 backup
4. Install the keyboard.apk using Root Explorer
If you haven't got a 2.1.1 backup then you are going to have to use SEUS to re-flash 2.1.1 and re-root and follow the instructions above.
Roland
Rolandh said:
Backup your 2.3.3 Install with xrecovery and flash your 2.1.1 Backup (presuming that you have done a backup of 2.1.1)
1. Search for the Keyboard.apk using Root Explorer
2. Copy the keyboard.apk file to you SD card
3. Re-store your 2.3.3 backup
4. Install the keyboard.apk using Root Explorer
If you haven't got a 2.1.1 backup then you are going to have to use SEUS to re-flash 2.1.1 and re-root and follow the instructions above.
Roland
Click to expand...
Click to collapse
Thanks everyone the new ROM Have what I need but with no camera
the keyboard is fine, the old one didn't have an Arabic keyboard input but now it does the android keyboard i mean.
and there is an application called "Smart Keyboard PRO", which also have what I needed.
As the title says, i can't install this rom http://forum.xda-developers.com/showthread.php?t=1129414, I made everything and it stays on the SE logo and then it restarts, I don't know what to do, please help me
i have exactly the same problem mate,
is this the first rom youve installed?
if not what other one?
noo, this is i don't know, maybe the 4th rom i've installed, but it's the only one that gave me problems :S, i've installed froyocomb v1.5 and the other one that it's on version 5.0
Private message me
sent from this midget x10 mini pro using cm7.2.3.3 14.5 Oc by slade87
I have the same problem, but it started when I installed SROM v8. Then every ROM except original from SEUS couldn't boot. I did WIPE, cleared CACHE and DALVIK CACHE on stock ROM and then installed modified ROM. It is working now
That ROM has in his archive system\lib\modules\ x8oc.ko and x8uv.ko
Delete those files from the archive and it will work!
If it worked, touch the thanks button!!!
nilseby said:
That ROM has in his archive system\lib\modules\ x8oc.ko and x8uv.ko
Delete those files from the archive and it will work!
If it worked, touch the thanks button!!!
Click to expand...
Click to collapse
am trying this now if t works then thanks so much
if not oh well ill get there eventually lol
EDIT: it did not work thank you anyway for trying,
i read somewhere it may be that the rom is overclocked and my phone cant take it? is there a way i can remove that from the rom?
Hi all, yesterday following all the steps to update the rom in my mini X10 Pro v13 Gynger DX, and after the restart came the letters of Sony Ericson, and then I got the dx Gynger Android, but it does not leave , makes loading and until it reaches a point that stands still and I can not turn it off or do anything if you do not remove the battery.
I tried to get into recovery and do not and will not let me do if I could say that to appreciate it.
My steps to install are as follows:
1 .- Root
2.-titanium back up
3 .- install recovery
4 .- I back up the phone
5 .- Install dalvic room before cleaning cache battery and the other
Do not know if this might influence something under the previous step fix got permission, and by mistake instead of giving back I gave the square button and run me.
6 .- installed room
reboot and after that I caught the screen is in the dx gynger v13 Android and will not let me enter Xrecovery.
Well, I do not understand much about it but I use this rom and never had that problem. I will try to help you. If you can not enter to xrec, you would have to use SEUS and install the official rom, and try again from the beginning. I recommend you use cwm to install the rom, not xrec. After installing the rom make a wipe data / factory reset.
Hope this helps! Sorry my English.
1) What is the baseband on your phone
2) Did you install with Xrecovery or CWM?
3) Do you have an x10 mini pro or mini (I.e do you have a slide out keyboard)?
@ Kunaguero
I try to use SEUS and hopefully that works, and for installing it again proves safely from CWM. Do not worry about your English I'm not too loose, use google to translate lol. Thanks
@ Timmyhate:
1 .- 2.1.1.A.0.6 and M76XX-version-53404015 TSNCJOLYM
2 .- XRecovery
3 .- I have a mini pro
Solved
I repaired with Pc Companion and I have my mini pro x10 2.1.1.A.0.6-in version
Thanks for the advice and help, I thought I had it loaded and I already had a brick jejeje
Good for you!
To install GingerDX try this guide:
1st - download and run it:http://forum.xda-developers.com/showthread.php?t=913136 - to root and install xrec on your phone.
2nd - download your rom
3rd - make a backup using xrec
4th - choose install custom zip and select zip from sd card
obs.: WIPE YOUR DATA BEFORE!!!!
5th - wait
6th - reboot
7th - configure
8th - Thats ready to ROCK with custom roms!!!
XxLordxX said:
To install GingerDX try this guide:
1st - download and run it:http://forum.xda-developers.com/showthread.php?t=913136 - to root and install xrec on your phone.
2nd - download your rom
3rd - make a backup using xrec
4th - choose install custom zip and select zip from sd card
obs.: WIPE YOUR DATA BEFORE!!!!
5th - wait
6th - reboot
7th - configure
8th - Thats ready to ROCK with custom roms!!!
Click to expand...
Click to collapse
I´ve heard so many good things about GingerDX, right now i´m using MiniCM7 Pro - V9, is a good rom very stable, the only thing about this rom that i don´t like is the camera i´m not able to record high quality.
Here are my questions, What improvement ginger dx can offer me? Does it have a better camera app than MiniCM7 Pro - V9? assuming that i want to give it a try, Can I install this rom using CMW instead xrecovery? and my last question, Do I need to make a backup or is up to me?
Thanks for the guide
Camera is fully working with GingerDX. And i recommend install via CMW, no xrec.
kunaguero said:
Camera is fully working with GingerDX. And i recommend install via CMW, no xrec.
Click to expand...
Click to collapse
Which version of Ginger DX do you recomend me to install?
I noticed that there are 2 post with the name Ginger DX V13, Are there any diferences between those posts?
This are the posts i´m talking about:
http://forum.xda-developers.com/showthread.php?t=1225668
http://forum.xda-developers.com/showthread.php?t=1198941
Thanks for the recomendation.
I'm using GingerDX v13 ported by Eyama (http://forum.xda-developers.com/showthread.php?t=1198941)
Here is the post of the lastest version: Link v13
And here the link of the hotfix: Link Hotfix v13
Check out the thread for more information about this! GL!
kunaguero said:
I'm using GingerDX v13 ported by Eyama (http://forum.xda-developers.com/showthread.php?t=1198941)
Here is the post of the lastest version: Link v13
And here the link of the hotfix: Link Hotfix v13
Check out the thread for more information about this! GL!
Click to expand...
Click to collapse
Hey amigo, Do you know if i need to do some adjustments to the rom, after i install the rom and the hotfix?
I'm asking you this because of my experience with minicm7 pro v9 from paul_xx, I had to do some things to fix the rom.
Thanks for the links amigo
you don't have to do anything, the only thing is after you flash the hotfix, you will not be able to control the brightness. There is a solution for it. You can edit the hw_config.sh file in /system/etc replace some of the lines in the beginning with this in the link
http://forum.xda-developers.com/showpost.php?p=17491527&postcount=1650
Monarcave said:
Which version of Ginger DX do you recomend me to install?
I noticed that there are 2 post with the name Ginger DX V13, Are there any diferences between those posts?
This are the posts i´m talking about:
http://forum.xda-developers.com/showthread.php?t=1225668
http://forum.xda-developers.com/showthread.php?t=1198941
Thanks for the recomendation.
Click to expand...
Click to collapse
I recommend you this http://forum.xda-developers.com/showthread.php?t=1198941 used by the most users and have all the news before the other post.
Man sorry for that, that occurred because when I did that post (I copied from other post I did) I was using xrec, but CWM is much better. And kunaguero, I want to correct you: until D4 or slade don't do a new kernel that can do that, we can't record in HD. But let's wait to see what happens
Hi I have a problem installing newer version of busybox..now I have 1 15 3 and installed on system/xbin and when I install newr version my phone freezes on boot logo..can someone tell me why this happens and how I can instal newer version of busybox???
Sent from my U20i using XDA App
Are you using a custom ROM? Custom ROMs for the X10 mini & mini pro use a chargemon shell script which is run using "busybox sh". I have seen some busybox versions around compiled without "sh". Maybe that is the problem. Try to call "busybox sh" in any terminal in your phone after updating busybox and before rebooting.
try stericson's app: https://market.android.com/details?id=stericson.busybox
thotypous said:
Are you using a custom ROM? Custom ROMs for the X10 mini & mini pro use a chargemon shell script which is run using "busybox sh". I have seen some busybox versions around compiled without "sh". Maybe that is the problem. Try to call "busybox sh" in any terminal in your phone after updating busybox and before rebooting.
Click to expand...
Click to collapse
Did you figure it out, i have the same version of busybox on Flame.E v0.2 with ZP kernel 1.6.3 and i wouldn't mind updating it. No reason in particular just coz lol..
Cheers,
Evil.
thotypous said:
Are you using a custom ROM? Custom ROMs for the X10 mini & mini pro use a chargemon shell script which is run using "busybox sh". I have seen some busybox versions around compiled without "sh". Maybe that is the problem. Try to call "busybox sh" in any terminal in your phone after updating busybox and before rebooting.
Click to expand...
Click to collapse
yes i'm on flame.E v.02..ok thank you really much..i'll start with SEUS and then i'll try...
HAHAHAHAH bricked for fourth time trying to install busybox 1.18.2!let's go again SEUS-root-clockworkmod installer and finaly custom rom!
chrisgall said:
HAHAHAHAH bricked for fourth time trying to install busybox 1.18.2!let's go again SEUS-root-clockworkmod installer and finaly custom rom!
Click to expand...
Click to collapse
Ohh thats a shame.
MiN Clipped Stock Eclair 2.1.1.C.0.0
Stock 2.1.1.C.0.0 w/ Root
dr.norton said:
MiN Clipped Stock Eclair 2.1.1.C.0.0
Stock 2.1.1.C.0.0 w/ Root
Click to expand...
Click to collapse
Its not that we want a rom with newer busybox, we want the new busy box to run on our roms that we use already. thanks for your help tho.
Cheers,
Evil.
chrisgall said:
let's go again SEUS-root-clockworkmod installer and finaly custom rom!
Click to expand...
Click to collapse
evilbarcode said:
Its not that we want a rom with newer busybox, we want the new busy box to run on our roms that we use already. thanks for your help tho.
Cheers,
Evil.
Click to expand...
Click to collapse
which rom you've installed via seus?
btw, MiN is a stock rom with cwm, so you don't have to follow seus+root+cwm route
as i wrote before, stericson's application does the job. if you don't like the idea of installation an app for it, just install it once then rip busybox as the newest appropriate version and keep it for future.
cheers
dr.norton said:
which rom you've installed via seus?
btw, MiN is a stock rom with cwm, so you don't have to follow seus+root+cwm route
Click to expand...
Click to collapse
Good point didnt think of that. My bad lol
as i wrote before, stericson's application does the job. if you don't like the idea of installation an app for it, just install it once then rip busybox as the newest appropriate version and keep it for future.
cheers
Click to expand...
Click to collapse
We are trying to get the new busybox to work on Flame.E v0.2 but it keeps bricking the device. I have tried stericsons and it did not work. Phone bricked.
Cheers,
Evil.
btw, i haven't realized that you have x10 mini pro, sorry. if you need a rom like MiN somehow, take a look to pfonck's clean rom.
dr.norton said:
btw, i haven't realized that you have x10 mini pro, sorry. if you need a rom like MiN somehow, take a look to pfonck's clean rom.
Click to expand...
Click to collapse
yeah i already did lol, but for me its not so bad coz i made a backup of my stock with root and cwm and flash that to save me time. then i get to start from scratch from my vendors original fw before going custom. so its all gravy in the navy.
But the original problem is cant get a newer version of busybox running on Flame.E
It wont let us do it, always brick device.
Cheers,
Evil.
Hi all!
I found a thread on the same topic, sorry if it is not
I have a problem with flash Gingercruzt 2.2 to 2.3.
1) Use XXKPP Stock ROM and modem from Latin America (Chile)
2) Flash Gingercruzt 2.2 (Wipe + / format system) PASS
3) Flash Gingercruzt 2.3 FAIL
Result: Bootloop
I also tried flashing from CM7.1, but the same result.
I left the 2.2, very fast, stable and good (and sexy). Plus a couple of tweaks & scripts
Cheers
Aided by google translate xD
You flashed v2.3 with wipe?
Dont wipe any thing while install v2.3
Well if its not solve prob then just do one thing extract v2.3 rom and replace frameworkres.apk in system/framework/ with normall cm7.2 frameworkres.apk then zip rom and flash now no bootloop
as prob was of frameworkres.apk
now after flash
install frameworkres.apk of gingercruzt v2.3 using update script or adb push or just tell me ill give it
nims11 said:
You flashed v2.3 with wipe?
Dont wipe any thing while install v2.3
Well if its not solve prob then just do one thing extract v2.3 rom and replace frameworkres.apk in system/framework/ with normall cm7.2 frameworkres.apk then zip rom and flash now no bootloop
as prob was of frameworkres.apk
now after flash
install frameworkres.apk of gingercruzt v2.3 using update script or adb push or just tell me ill give it
Click to expand...
Click to collapse
Hi
I flash from 2.2 to 2.3 with and without wipe ... any form of work
I'm very bad with shell. I would prefer if you could send the script C:
Thanks for you help !
PS: At night I'll try to unpack the ROM and extract the APK's
http://db.tt/45Ub4Bf4
after successfully booted with v2.3 install by cwm
Thanks friend, ran to the first
nims11 said:
http://db.tt/45Ub4Bf4
after successfully booted with v2.3 install by cwm
Click to expand...
Click to collapse
What is the different if i flash it??
Pls correct my English ;-)
Sent from my GT-S5830 using xda premium
This is how I successfully installed it:
1. Wipe data/factory reset
2. Flash GingerCruzt 2.2
3. Reboot twice
4. Flash GingerCruzt 2.3
I had a bootloop when I installed GingerCruzt 2.3 without rebooting first, and I noticed you did not put rebooting in your procedure.
udhien28 said:
What is the different if i flash it??
Pls correct my English ;-)
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
It's like changing the interface .... or theme. is reflected in the status bar and other details.
adeklipse said:
This is how I successfully installed it:
1. Wipe data/factory reset
2. Flash GingerCruzt 2.2
3. Reboot twice
4. Flash GingerCruzt 2.3
I had a bootloop when I installed GingerCruzt 2.3 without rebooting first, and I noticed you did not put rebooting in your procedure.
Click to expand...
Click to collapse
Really? Did not try that way when I did the flash. But do not worry until update 2.4
neotenshi said:
It's like changing the interface .... or theme. is reflected in the status bar and other details.
Click to expand...
Click to collapse
I can't feel the deference after flash this..
Pls correct my English
i don't have prob when flash gc2.3 , just flash 2.2 on cwm 5 ,reboot and flash 2.3. it work as should it be without prob
neotenshi said:
Hi all!
I found a thread on the same topic, sorry if it is not
I have a problem with flash Gingercruzt 2.2 to 2.3.
1) Use XXKPP Stock ROM and modem from Latin America (Chile)
2) Flash Gingercruzt 2.2 (Wipe + / format system) PASS
3) Flash Gingercruzt 2.3 FAIL
Result: Bootloop
I also tried flashing from CM7.1, but the same result.
I left the 2.2, very fast, stable and good (and sexy). Plus a couple of tweaks & scripts
Cheers
Aided by google translate xD
Click to expand...
Click to collapse
Same problem for me too friend.. if you found any solution for this please reply my post. please help me to solve this problem. i am not able to install other rom also...
i am waiting
thanks
az28 said:
i don't have prob when flash gc2.3 , just flash 2.2 on cwm 5 ,reboot and flash 2.3. it work as should it be without prob
Click to expand...
Click to collapse
yes it is The correct way