Sadly my X10 has come to an end. Its been one of the best things I've owned over the past 6 months. But its current state has just made me give up on it
From what was a tiny small crack in the screen has now ended in me getting rid of the phone.
I replaced the digitizer but when doing so scraped off the doublesided glue, so waited another 3 weeks for that to come from overseas.
After finally arriving and damaged the LCD putting it back together. So waited more weeks for that to come. The new LCD is good, I boot the phone to notice the screen goes from 256k colours (looked ****) to normal - almost every time I touch the screen. I investigate to find the replacement digitizers ribbon cable which is attached to the glass has come off. Im putting it down to being faulty as so much care and love was put into putting it back togeather. Im not going to bother ordering a new one.
The last 3 months I've been without it, so its time to move on. Funny enough my girlfriend who hated her x10 since day one (yes we had matching x10's) was given an iphone so I'm taking hers.
As I speak, it sits in front of me in bits and I am seriously over trying to fix it. Its black too.
Dont let your child die
I was thinking of giving it one last go, but I woke up thinking the digitizer cable being broken wouldnt have been causing the bad screen colour. That would have to be LCD related..
So its definately all over with now!
buy a superamoled display from the SGS
oh man, its awful to hear that.
all parts are available if anyones interested
Helo.Sorry for my english but i want to ask, you have all the parts off the phone?My x10 usb is broken and i cant recharge.The motherboard is that im interested.Do you sell it?
Hello.
I wanted to know if you have some spare parts from X10 (Ear Piece Speaker Flex Cable and Keypad Button Flex Cable).
Thank you.
im really interested about the motherboard,you still got it?
Is your phone still up for grabs? Please PM me.
Regards
K
hey.
hey fellow brent I hope everything goes ok with your x10.
Hi All,
Im having some problems with my Evo 3D. It was scratched out of nowhere by just sitting in my backpack MP3 slot. I found some dust on the screen (most likely thats the cause of the scratches). I have 2 medium scratches and a lot of minor/medium. The problem is that I am really getting upset when I look at my screen and I decided to accept it condition no more. I have 2 questions (For the first one I am pretty sure of the answer, but still I will ask it).
First. Are these scratches covered by the warranty? The obvious answer is no of course, but I am wondering - since it is with the "mighty" Gorila Glass, how did it got scratched without even dropping it... So Im thinking, is it possible that the warranty will cover this?
Second. If the answer of the above question is NO - I will change my digitizer. I chose to change the digitizer because it costs 10 pounds, comparing with the whole screen which is 70-80 on ebay. There is something that bothers me though. I am afraid that even a slight misalignement will cause troubles while using the phone and missclicking some stuff... Also I am afraid that dust might get between the screen and the digitizer while Im doing that.
I hope there is someone that already done this (and I mean digitizer only change) that will be able to help me with some advices and/or techniques. I am technocal guy, so following your instructions wont be a problem. Its just I haven't change Evo 3D digitizer before and I want to have proper preparation.
Any advises will be greatly appreciated.
Thank you.
Have a look at this:
http://forum.xda-developers.com/showthread.php?t=1560037
I posted some stuff on the last page too so you can go to that.
HTC might fix it for you, probably at a cost, you can give them a ring and see if they can help
Other than that, just read through the link i gave, alot of good info there that will help you replace the digitizer. Good luck!
I ordered a screen/digitizer assembly to replace mine because its cracked. I didn't want to disbond the digitizer so I ordered the whole assembly.
When I installed the new. assembly, the screen wont come on and the phone wont boot. Here is where thing started to get interesting:
1. Boot the phone with the old screen assembly and wait until the home screen shows then turn off screen.
2. Disconnect the old screen at this moment and connect the new one while the phone in sleep mode.
3. push power button to wake screen and its working and fully functional.(New one)
If I tried to reboot the phone the new screen wont come back on again. I also tried to reset and RUU and it still wont work.
Please let me know if you have any suggestions. I am in the process of returning the screen and getting another one, but i am still worried if I will be going through the same issue. One thing I didn't like about the phone is the cheap trashy components. So easy to brake and not made to be worked on.
I think I found the problem.
Well. Taking a closer look at the ribbon cable for the LCD and it appears to be the same color, but if you follow the lines, it does not look the same. I am currently waiting on a screen from a different seller and hoping to be the right one. I will keep you updated as I go forward.
Too many views, but no comment. I just hope this post going to help someone in the future. Keep in mind that sellers doesn't specified the kind of the LCD which is creating the troubles.
I am going to attach some photos to make it little clear. Keep in mind that I have HTC One for AT&T USA.
Did you ever replace the screen? I need to take mine apart and put a new battery and USB port in it. I'd like to know how pulling the screen went for you, if it was done.
xartic12 said:
Did you ever replace the screen? I need to take mine apart and put a new battery and USB port in it. I'd like to know how pulling the screen went for you, if it was done.
Click to expand...
Click to collapse
Not that good. I watched a YouTube video that helps a Little. You have to be really careful. Watch it and let me know if you need any additional help. Removing a broken screen not that bad since its broken. Be really careful when you order your new screen because I am having trouble to fine the right one. Mine PN: 60H00741-00P . There are many PN: 60H00742-02M that aren't working for me.
Forgot the video links
To disassemble : http://www.youtube.com/watch?v=qZFAsgjCunc
To reassemble: http://www.youtube.com/watch?v=S5KNmDeJ4Ww
medoo313 said:
Not that good. I watched a YouTube video that helps a Little. You have to be really careful. Watch it and let me know if you need any additional help. Removing a broken screen not that bad since its broken. Be really careful when you order your new screen because I am having trouble to fine the right one. Mine PN: 60H00741-00P . There are many PN: 60H00742-02M that aren't working for me.
Click to expand...
Click to collapse
The problem I have isn't the screen, but rather the battery and the USB port.. I have found both for about $20 each, but just didn't want to trash a basically brand new HTC.
Did you use a suction cup or pry it out?
xartic12 said:
The problem I have isn't the screen, but rather the battery and the USB port.. I have found both for about $20 each, but just didn't want to trash a basically brand new HTC.
Did you use a suction cup or pry it out?
Click to expand...
Click to collapse
I used a plastic sharp tool and you need to find the spots where you have to press on it to get it released. If you look at the first video, you will see where he marked it. those are the lock tabs that hold the assembly. The worst could happen is you may put a few dents in the plastic frame. You can order this part for around $20. A suction cup may works for you as well. Consider giving it little heat to lose the adhesive. Let me know if you still have any further questions.
Good luck
Where to get the right LCD in USA
I finally found a good supplier in USA for the proper kind of LCD. I spoke to him on the phone and I sent some pictures of my LCD. He has LCD part number 60H00741-00P that I been looking for. The website is https://www.gounlock.com/ If you ever call, ask for Jacky.
Hello XDA Community!
I seem to be having a serious issue with my phone and cannot seem to find a solution online, so I am hoping that someone here will be knowledgable enough to assist me!
When I slide my keyboard out on my sk17i, my screen refuses to change orientation or respond to my touches. Having tested this further, it seems that it is the screen itself that will not change, but keys pressed and touches are registered. I have figured out that I can slide the keyboard out about 40% (just over the bottom row of letters) and the screen seems to change orientation to landscape AND responds visually to my touches. Any more than that and it just stops.
I looked online and someone suggested passing a magnet (fridge) over the keyboard. I did that and it worked once for about a minute. After that it returned to this state and there doesn't seem to be anything I can do about it. I have just put in an order for new facias and a new hardware keyboard to repair it as I have had it since the day it was released and some components are getting on a bit.
Does anyone know what the issue is? I only can think of one thing and that is a flex cable issue, but I cannot be sure at all...
I'd appreciate any help that can be given!
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Pixelado said:
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Click to expand...
Click to collapse
Many thanks for that! The flex cable is out of stock right now, so that is quite worrying, I hope it lasts the next month or so! I think I should be okay with repairing it, since I've worked with very small and delicate electronics before in Engineering. Just will have to be super extra careful! Any advice about what to watch out for?
And yup, magnet seemed to work once, I saw it on a very old thread, but that was the only advice given there.
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Pixelado said:
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Click to expand...
Click to collapse
Aah okay! I guess I shouldn't bother replacing the facia then, don't want to break the screen! Thank you once again!
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
ECGadget said:
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
Click to expand...
Click to collapse
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Pixelado said:
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Click to expand...
Click to collapse
Thanks for that! I was just struggling to take the motherboard off, and looking at the picture helped me see where I could try to pry it open!
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Pixelado said:
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Click to expand...
Click to collapse
Well, after a cracked front facia (thanks to the previous repair that I had on it two years ago), and my temperamental lights, my phone works a charm! Replaced the flex cable, motherboard mount and hardware keyboard. Once again, thank you so much for your advice, I have decided to hang around this place much more often!
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Pixelado said:
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Click to expand...
Click to collapse
I've had my phone since two weeks before it was released in 2011 xD
I'm sure your phone will love the cake
Noticed a new glitch with my phone though... the softkey and keyboard lights start to light up when I switch the screen on, but as soon as the screen switches on the lights switch off?
Never heard of such problems. What rom are you on?
I am running a stock gingerbread 2.3.3 rom, just rooted it a year ago. No other changes, apart from shoving CWM onto it for backup/restore
Hey guys, I just saw this post after hours of frustration!, I recently changed my damaged slider mechanism on my sk17i and I had to transfer the ribbon cable from the one mechanism to the other but I glued it with 2mm adhensive that is used for screen, and the problem is when I open the phone it is always on landscape mode, like the phone thinks the keyboard is always out! Before I tried this repair
everything worked perfect
How the phone understands if the keyboard is out or not?
Please tell me what I could have done wrong, I would appreciate your help here!
Sorry for my bad english
Thank you in advance!!!
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Pixelado said:
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Click to expand...
Click to collapse
And you dissasembled it and re-assembled with no problems?
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Welcome to XDA.
Like Pixelado said, it is probably an optical sensor. My advice would be to disassemble the phone again (without unsticking the flex cable though) and make sure everything is back in its correct place. It make just be something is a little out of place, which is very easy to do! Good luck!
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Pixelado said:
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Click to expand...
Click to collapse
Then as long as I dont know where the sensor is in order to find out my mistake, I am afraid my phone will be permanently on landscape :crying:
Thank you for your replies guys!
Hi
Sorry if wrong category. I was sheard forum and i dont found that problem.
So, i have S6 Edge with broke glass screen. In my country everyone say its impossible replace it. I must pay one month pay work for new screen......
But i saw many YT tutorials where mens from other countries do it.
I have
New glass(cheap chinese)
hair dryer
UV flashlight
UV Glue
deck of cards
scalpel
But, no one says how i can clean old glue and how i can repair long hole in side device(i want incuding photo but i cant), that thing under glass but upper screen become detached. Can i use screen glue? When i push in specific place then touch buttons work, normaly no i use ****[email protected] program and TouchWiz always screaming at me when he need some app permissions so i must reinstall it over and over...
Sorry for my tragic English, this is not my native language. I tryed hard. Thanks everyone for help.
Hmm I know other people who have been in this situation where the screens are very expensive or hard to replace. They purchased phone insurance and then made a claim a few weeks later and got the screen fixed.. after reading you've already attempted so you'd have the extreme cases of saying it was lost... There's many things wrong with this method but many do it
mrsweet1991 said:
Hmm I know other people who have been in this situation where the screens are very expensive or hard to replace. They purchased phone insurance and then made a claim a few weeks later and got the screen fixed.. after reading you've already attempted so you'd have the extreme cases of saying it was lost... There's many things wrong with this method but many do it
Click to expand...
Click to collapse
This is old, heavy used phone. No agency does not give me insurance.
JakuzoRU said:
This is old, heavy used phone. No agency does not give me insurance.
Click to expand...
Click to collapse
Okay, well hopefully someone on here can give you some good advice
i tried replacing my screen, i ended up tearing the LCD so had to buy a new LCD assembly which is easy to replace but it costs a fair bit more.
this is by far the best way but if you want to just try the screen then be very very careful as the LCD is glued to the screen and hard to seperate.
That hole its biger and biger. Now i have left and rigjt button with only back funcion. Something is really bad there. I must repair this fast.
OK, theme to close. I **** up screen. Never ever repair phone when drunk. Eeverything go to trash.