I want to install xRecovery, i tried the .apk installer and manual version.
My phone is rooted
BB up to version
All files are inside my root explorer
Permissions set
But when i on my phone i spam back button nothing happens
Try this :
1.Download package from this thread http://forum.xda-developers.com/showthread.php?t=878426(at the end o 1 post) and extract it
2.Install busybox from market then enter it from menu and select version 1.17.1(I choosed this and it worked for me)
3.In extracted folder you should have 3 files : busybox ,chargemon , xrecovery.tar
4.copy these 3 files on your SD card
5.On phone open Root explorer go to your SD card directory tap Menu button(these four squares) select "Multi select"
6.Select those 3 files that you put on SD card (busybox ,chargemon , xrecovery.tar)
7.When You have selected those 3 files select option "move" , tap once back button and enter "system" folder in sytem enter "bin" folder and than select paste
8.Reboot phone and its done (to enter x recovery when phone boots and Sony Ericsson sign shows start tapping back button)
Related
hi all, help me to back up my roms plzzzz
my ori rom is
Rom v 1.03 USA
n bootloader mode v 1.02
i wanna upgrade to wm2k3SE
but i cant back up my rom ?
if i wan to back up always pop up notice
Card initialize is failed ??
wat thats means ?
thzzz for ur anssss
While a lot has been written, the following should provide an easy-to-follow guide:
Preparation:
1. A torch (read on and you will know why)
2. 256M SD card
3. Download ntrw.exe, romupdate.exe, hexedfull.exe from the ftp of this forum to c:\ and install hex editor
4. Download the appropriate ROM file (hereafter referred to as "newrom.nb1"). Somehow, these rom files seemed to be deleted from this ftp. I will upload them later.
5. Cancel USB in ActiveSync
6. Use Sprite Backup to backup your ppc
Backup original ROM:
1. Put ppc into the boot loader mode (hold both on/off and camera buttons at the same time while resetting).
2. Insert empty SD card.
3. Connect ppc to pc through USB.
4. Run romupdate.exe on pc.
5. Select “\\.\WCEUSBSH001” in port settings. In the popup windows, enter “d2s” and press enter.
6. Don’t get panic to see the ppc screen goes dark. Use your torch and you will see the download percentage. Wait until it reaches 100% and shows “CheckSum is OK!”.
7. Insert SD card into card reader of the pc. Ignore the “format SD card” message and click “No”.
8. Run “command” to go into DOS prompt and change to root directory (cd c:\). Enter “ntrw read oldrom.nb1 s:” where s is the drive of your SD card.
9. Ignore the “Data error <cyclic redundancy check>” message. You should save another copy of this important rom file “oldrom.nb1”.
Change header of newrom.nb1:
1. Right click on oldrom.nb1 to open hex editor. Copy the first 220 bytes.
2. Open the downloaded newrom.nb1 file and overwrite the first 220 bytes with those of the old rom.
3. Save the edited newrom.nb1. You may save another copy of this important file.
4. Go to the command prompt and enter “ntrw write newrom.nb1 s:” to write it to the SD card. Ignore the error message “The parameter is incorrect”.
Update the ROM:
1. Insert SD card into ppc and put it to boot loader mode again (on/off + camera + reset). Use you torch to check the dark screen.
2. When it shows “Press Power to flash”, press the on/off button. Wait until it reaches 100% and ignore the message “Download Fail - CheckSum Fail”
3. Soft reset your ppc.
4. You may have to reinstall your software, unless you are familiar with the advanced features of Sprite Backup.
or u can find at http://forum.xda-developers.com/viewtopic.php?t=19500&highlight=rom+backup
thanks to talent and all XDA Dev
Phreakazoidz
Is anyone aware of or developing a custom ROM for this device? Or are there any ROMs out there for other devices that will work on this tablet as well? Finally, I need to know how to install CWM for this device as the standard one from the Market does not work...
Thanks!
cmd on windows
Bump!
at least ten characters
karatche said:
Bump!
at least ten characters
Click to expand...
Click to collapse
huh? Not sure I understand your reply....
Type in google "how to root coby kyros 1125".i didp a tutorial and h how to instalere you will find how to instal the cwm.
paulonsf said:
Type in google "how to root coby kyros 1125".i didp a tutorial and h how to instalere you will find how to instal the cwm.
Click to expand...
Click to collapse
I placed your update.zip in the root of my SD card and navigated to settings//about phone etc to install the update.zip but all I get is the dreaded Android with the exclamation mark...advice?
dbeauch said:
I placed your update.zip in the root of my SD card and navigated to settings//about phone etc to install the update.zip but all I get is the dreaded Android with the exclamation mark...advice?
Click to expand...
Click to collapse
... but how to obtain this file "update.zip" to install CWM?
tom
tomitko said:
... but how to obtain this file "update.zip" to install CWM?
tom
Click to expand...
Click to collapse
dbeauch ,
just noticed your location , I was raised in Milford , wow
Here you go
Restore to 4.1 working google play and root
Download file from here
https://www.dropbox.com/s/fixhl34x7qr13v6/1125.zip?dl=0
Copy entire 1125.zip folder to desktop
Extract 1125.zip to desktop
Install PdaNetA4170.exe driver ( This should allow you to transfer files with Fastboot )
This is Version 4.17 installer for Windows 8/7/Vista/XP (both 32/64bit)
Extract CWM recovery img_1125 folder to desktop by itself ( Do not remove any files from this folder )
Move zip files from zips folder to micro sd card and insert sd into tablet ( leave these in zip format !! )
coby_gapps.zip
coby_mid1125-seed-0012.zip
Superuser-3.1.3-arm-signed.zip
Also move apks from apks folder to MicroSD card
Uni-init+v1.0.apk
Google_Play_serv.ices-signe.d .apk
Busybox.apk
Link2sd.apk
and
market-helper-2.0-beta.apk ( this will allow spoofing of market for not compatible apps )
Open cmd window
( menu , run , when window opens , enter “cmd” without quotes )
Cd to directory
ie ,
type in window
cd desktop , ( enter )
cd CWM recovery img_1125 ( enter )
Now place 1125 into fastboot mode , power ( or reset button ) and volume down , tablet will show fastboot mode in lower left corner
Plug in usb cable to pc and tablet
Then in cmd prompt type
fastboot boot recovery.img ( enter )
It will show some stuff , flash ok and done ok
Tablet should boot to CWM give it a moment to do so ( You will see CWM Recovery Top hat and such )
Volume up is up , Volume down is down , Home ( Silver Button ) is select
Go to and select flash zip from sd card
This will pull up menu of following zip files
Flash each zip file
coby_mid1125-seed-0012.zip
coby_gapps.zip
Superuser-3.1.3-arm-signed.zip
Select reboot
Tablet will boot ,again give it a moment ( You will see Coby and then Android splash screen )
Select language from first screen ( as it will be in Dutch ), finish setup of tablet
Open ES File Explorer , go to tools setting in ES File Explorer and select
“Root Explorer” to on , allow when Super User prompt shows , this will prove SU is installed and working
Open ES File Explorer , Select sdcard top right , Select storage
Install Google_Play_serv.ices-signe.d .apk ( To sync Play Store )
Install Busybox.apk
Install Link2sd.apk
Install Uni-init+v1.0.apk
Open Uni-init+v1.0.apk , install intd support
( you will need busybox installed first for this to work )
You now have working Play Store , Superuser and Android 4.1 with Intd support
For Extended memory ,( You need this )
Increase Internal Memory by Link2SD : Min 2 GB microSD
In order to add memory to Coby 1125, your micro SD card used for install will need to be formatted
Copy all files you wish to keep from micro SD to desktop as it will be wiped
• Backup all your files on memory card.
• Go into the Recovery Mode ( as above , fastboot boot recovery.img ) ( Your operating system will be fine )
• Make a nandroid backup at this time
• Select “Advanced”, and then choose “Partition SD Card”.
• Then Choose your size ( if you have a 2GB Memory Card, choose 512 MB, and if you have a 4 GB Memory card, you can choose 1024 MB, ext ).
• Select 0 Swap.
• Wait for the process to finish, and then select Reboot
You’ve just made a partition on your memory card, and its ready to use.
Now follow the steps below for Link2SD
• Open Link2SD. You will be prompted to choose between ext2,ext3,ext4 and FAT32.
• Choose ext2
• Select OK ,
• It will then say, “Mount Script Created”.
• Now you Reboot your Tablet
• Open Link2SD again, if any message does not appear ,it means you succeeded.
• Go to Link2SD > Setting( far right top icon ) scroll down > Check the autolink. (to automatically move apps upon installation).
If you already have some apps listed , select “create link” ( be sure to check the files: app, dalvic-cache, and library files).
Move to SD option only moves app to SD it does not link them
Now to check the memory, select “Storage Info” . this will be showing you up the current status of your internal memory.
You should see as below SD Card 2nd Part
To move a system App you can long press App , it will pull up menu , select convert to user App let it do its thing
Select App again and it will open option to create link as installed user apps do
So far I have moved Calculator , VPN , Music FX , ES File Explorer and Sound Recorder with no issue
Use Link2Sd and (long press) on SystemUpdate.apk ( /system/app/SystemUpdate.apk ) and freeze app.
This will stop System Update from happening at random moments or on reboot
There is no Update to install though the System thinks so (without freezing it will continue to show updates available)
donnasbrt1 said:
dbeauch ,
Download file from here
dropbox.com/s/fixhl34x7qr13v6/1125.zip?dl=0
Click to expand...
Click to collapse
Does anyone still have these files? The above link is dead.
Yes ..moved to mediafire
https://www.mediafire.com/folder/54b7vpekni9jp/Coby 1125
"Open cmd window
( menu , run , when window opens , enter “cmd” without quotes )"
I don't get this how can I open cmd on my tablet?
im following this tutorial,
Unrooting for 2.3.3/2.3.4/2.3.5/2.3.6/2.3.7 (Thanks to ingbrzy):
1) Download attached file called unroot.zip and copy it to your sdcard
2) Turn off your phone
3) Press POWER+HOME BUTTON
4) Select update from sdcard, select the file unroot.zip
5) After the update completed - reboot
6) Now you have unrooted S5830
im stuck in part 4 since i choose that and it says theres nothing, says no such file or directory. so i selected the option "install zip from sd card"> "choose zip form sd file" and there i choose unroot.zip and says install complete. then i reboot. but still i can use supermanager and cmw so its not applying. and even when i boot the phone in recovery mode again it apperas as cmw recovery. i need to unroot the phone so i can take it back to store since the wifi is getting an error and the screen goes black when im using it.
Unrooting does not remove CWM recovery .
To remove CWM you need to flash any firmware file via ODIN
Herpderp Adreno + Tegra.
joshuacul said:
im following this tutorial,
Unrooting for 2.3.3/2.3.4/2.3.5/2.3.6/2.3.7 (Thanks to ingbrzy):
1) Download attached file called unroot.zip and copy it to your sdcard
2) Turn off your phone
3) Press POWER+HOME BUTTON
4) Select update from sdcard, select the file unroot.zip
5) After the update completed - reboot
6) Now you have unrooted S5830
im stuck in part 4 since i choose that and it says theres nothing, says no such file or directory. so i selected the option "install zip from sd card"> "choose zip form sd file" and there i choose unroot.zip and says install complete. then i reboot. but still i can use supermanager and cmw so its not applying. and even when i boot the phone in recovery mode again it apperas as cmw recovery. i need to unroot the phone so i can take it back to store since the wifi is getting an error and the screen goes black when im using it.
Click to expand...
Click to collapse
CWM is not an application to get su access..Download RootChecker from market and see if you are unrooted..If you want to remove CWM,like emoboiix3 said,Flash an odin package
me
I tried by trying a root required app like root explorer
How can I flash my coby kyros mid1125? It's got a weird screen display and is permanent. It covers three quarters of the screen when its switched on. I have tried quick img program but it keeps asking for fast boot mode. I have tried holding the volume up and down buttons but it doesnt work. also have several times done reset. I have also tried FWDN program but it gives an error. I have the .img file. Can someone point me in the right direction please. Tell me what to do and provide download links for working .img file flashing uploaders etc.
Thank you.
ukguy183 said:
How can I flash my coby kyros mid1125? It's got a weird screen display and is permanent. It covers three quarters of the screen when its switched on. I have tried quick img program but it keeps asking for fast boot mode. I have tried holding the volume up and down buttons but it doesnt work. also have several times done reset. I have also tried FWDN program but it gives an error. I have the .img file. Can someone point me in the right direction please. Tell me what to do and provide download links for working .img file flashing uploaders etc.
Thank you.
Click to expand...
Click to collapse
Download from this link ,
https://www.dropbox.com/s/fixhl34x7qr13v6/1125.zip?dl=0
Copy entire 1125.zip folder to desktop
Extract 1125.zip to desktop
Install PdaNetA4170.exe driver ( This should allow you to transfer files with Fastboot )
This is Version 4.17 installer for Windows 8/7/Vista/XP (both 32/64bit)
Extract CWM recovery img_1125 folder to desktop by itself ( Do not remove any files from this folder )
Move zip files from zips folder to micro sd card and insert sd into tablet ( leave these in zip format !! )
coby_gapps.zip
coby_mid1125-seed-0012.zip
Superuser-3.1.3-arm-signed.zip
Also move apks from apks folder to MicroSD card
Uni-init+v1.0.apk
Google_Play_serv.ices-signe.d .apk
Busybox.apk
Link2sd.apk
and
market-helper-2.0-beta.apk ( this will allow spoofing of market for not compatible apps )
Open cmd window
( menu , run , when window opens , enter “cmd” without quotes )
Cd to directory
ie ,
type in window
cd desktop , ( enter )
cd CWM recovery img_1125 ( enter )
Now place 1125 into fastboot mode , power ( or reset button ) and volume down , tablet will show fastboot mode in lower left corner
Plug in usb cable to pc and tablet
Then in cmd prompt type
fastboot boot recovery.img ( enter )
It will show some stuff , flash ok and done ok
Tablet should boot to CWM give it a moment to do so ( You will see CWM Recovery Top hat and such )
Volume up is up , Volume down is down , Home ( Silver Button ) is select
Go to and select flash zip from sd card
This will pull up menu of following zip files
Flash each zip file
coby_mid1125-seed-0012.zip
coby_gapps.zip
Superuser-3.1.3-arm-signed.zip
Select reboot
Tablet will boot ,again give it a moment ( You will see Coby and then Android splash screen )
Select language from first screen ( as it will be in Dutch ), finish setup of tablet
Open ES File Explorer , go to tools setting in ES File Explorer and select
“Root Explorer” to on , allow when Super User prompt shows , this will prove SU is installed and working
Open ES File Explorer , Select sdcard top right , Select storage
Install Google_Play_serv.ices-signe.d .apk ( To sync Play Store )
Install Busybox.apk
Install Link2sd.apk
Install Uni-init+v1.0.apk
Open Uni-init+v1.0.apk , install intd support
( you will need busybox installed first for this to work )
You now have working Play Store , Superuser and Android 4.1 with Intd support
For Extended memory ,( You need this )
Increase Internal Memory by Link2SD : Min 2 GB microSD
In order to add memory to Coby 1125, your micro SD card used for install will need to be formatted
Copy all files you wish to keep from micro SD to desktop as it will be wiped
• Backup all your files on memory card.
• Go into the Recovery Mode ( as above , fastboot boot recovery.img ) ( Your operating system will be fine )
• Make a nandroid backup at this time
• Select “Advanced”, and then choose “Partition SD Card”.
• Then Choose your size ( if you have a 2GB Memory Card, choose 512 MB, and if you have a 4 GB Memory card, you can choose 1024 MB, ext ).
• Select 0 Swap.
• Wait for the process to finish, and then select Reboot
You’ve just made a partition on your memory card, and its ready to use.
Now follow the steps below for Link2SD
• Open Link2SD. You will be prompted to choose between ext2,ext3,ext4 and FAT32.
• Choose ext2
• Select OK ,
• It will then say, “Mount Script Created”.
• Now you Reboot your Tablet
• Open Link2SD again, if any message does not appear ,it means you succeeded.
• Go to Link2SD > Setting( far right top icon ) scroll down > Check the autolink. (to automatically move apps upon installation).
If you already have some apps listed , select “create link” ( be sure to check the files: app, dalvic-cache, and library files).
Move to SD option only moves app to SD it does not link them
Now to check the memory, select “Storage Info” . this will be showing you up the current status of your internal memory.
You should see as below SD Card 2nd Part
To move a system App you can long press App , it will pull up menu , select convert to user App let it do its thing
Select App again and it will open option to create link as installed user apps do
So far I have moved Calculator , VPN , Music FX , ES File Explorer and Sound Recorder with no issue
Use Link2Sd and (long press) on SystemUpdate.apk ( /system/app/SystemUpdate.apk ) and freeze app.
This will stop System Update from happening at random moments or on reboot
There is no Update to install though the System thinks so (without freezing it will continue to show updates available)
without any introductions these are the steps.....:
1- You must root your device first by Root genuis or any program else....
2- install root explorer from Google Play
3- You must know where is your APK file on your SD Card
4- launch root explorer....
5- Go to storage....
6- Go to sdcard....
7- long press on your apk file and choose copy or move...
8- Go to System--app and press paste
9- Search for it and long press again....
10- Choose permissions..
11- mark on the boxes as in the picture
12- press Ok.....
13- Reboot your device and its done !!!!!
I hate to say it but this is common knowledge. You can also do it with titanium backup or adb commands. Or a zip files