Related
post no longer relevant
If you want to update this, My modified cwm thread has the RED clockwork odin package.
adrynalyne said:
If you want to update this, My modified cwm thread has the RED clockwork odin package.
Click to expand...
Click to collapse
i think omj is going to change his op on af...ill copy that over when he does
When I get in Odin and select CWMRecovery_DJ05_DL09.tar.md5, it fails.
I did not touch any settings in Odin, just clicked PDA and selected that file.
Edit: Redownloaded that file and got it to work. I am now having an issue when applying update.zip... it starts but then comes up with an exclamation point inside of a triangle and the little Android guy... phone reboots fine.
Did you get this solved? Check out the thread at AF I had the same problem
worked like a charm..thanks!
SoCalSpecialist said:
worked like a charm..thanks!
Click to expand...
Click to collapse
ok so i havent been able to find a full answer..but does this leave the device in DI01 or 05 or 09?
just by looking at the files it seems as if it goes from 05 to 09 but once in about phone>build number it reads : DI01
so im just looking for a little clarification here..just rooted my Facinate minutes ago so im still stuck in the whole mindset of the Incredible.
I tried this. Have EA28. Not sure how. Didn't install. Saw install screen on phone last night and hit cancel.
Anyway, Ran Odin, CWMRecovery_DJ05_DL09.tar.md5, reboot, blue text, apply sdcard:update.zip, switched to red text, install zip from sd card, choose zip from sd card, su-2.3.6.1+busybox1.19.zip, choose zip from sd card, DJ05_DL09_kernel.zip (plain kernel due to dl09), ran titanium backup, could not acquire root priv.
Startup screen has sound, but not animation anymore. Installed superuser and it shows titanium backup under "allow". When I run TB, I get the error screen and below in another small screen says, "Titanium Backup has been granted superuser permissions". But can't get anywhere to backup apps. Says Root Access: Failed.
ideas?
Another thing that confused me was the red cwm says voodoo lagfix recovery v2.5.1.x. I thought you weren't supposed to use any voodoo for DL30? Not that I've made it that far due to titanium backup issue, but....
Can anyone confirm whether or not this to sure does or doesn't work with ea28? My wife updated he phone and now she wants it rooted.
Edit this does work for EA28. Everything went smoothly. Thanks nitsuj.
Sent from my SCH-I500 using XDA App
mdisaac said:
When I get in Odin and select CWMRecovery_DJ05_DL09.tar.md5, it fails.
I did not touch any settings in Odin, just clicked PDA and selected that file.
Edit: Redownloaded that file and got it to work. I am now having an issue when applying update.zip... it starts but then comes up with an exclamation point inside of a triangle and the little Android guy... phone reboots fine.
Click to expand...
Click to collapse
I also got stuck at the same screen. what did you do to resolve it????
Here is the link to my guide for rooting with a MAC. I do not have a PC and used these steps to successfully root my phone. After completing last step in guide and getting blue cwm on your phone, DL new red cwm and install
http://forum.xda-developers.com/showthread.php?t=967641
Sent from my SCH-I500 using XDA Premium App
EA28 going to DL09?
Hello..
I am just getting around to rooting my fascinate now. I have EA28. From the instructions, it appears you are going back to DL09. Is that correct? What is the significance of that? Should I care?
Thanks in advance!
This thread is old and should be deprecated. The directions still work, but you need to use the Odin package of ClockworkMod in this thread (it's the very first item linked) instead of the md5 file (DL05_DJ09) above.
However, if you're going custom the thing you should *really* do is Odin in one of the full-Froyo packages. This will include both root and recovery.
s44 said:
This thread is old and should be deprecated. The directions still work, but you need to use the Odin package of ClockworkMod in this thread (it's the very first item linked) instead of the md5 file (DL05_DJ09) above.
However, if you're going custom the thing you should *really* do is Odin in one of the full-Froyo packages. This will include both root and recovery.
Click to expand...
Click to collapse
Thanks S44. My goal is to go froyo, but I need to be rooted first in order to do that.
I have been reading all the threads but many of them are very long. The DL30 thread is over 50 pages long.
So should I:
1) follow the instructions in this thread but use the new ClockworkMod then
2) update to froyo.
What is the most current thread for updating to froyo on the fascinate while after I am rooted?
Appreciate it.
TheTinRam said:
Thanks S44. My goal is to go froyo, but I need to be rooted first in order to do that.
Click to expand...
Click to collapse
Actually, no you don't. Download mode is magic. You *do* need to be rooted to back up apps with Titanium, if you want to do that. In that case, follow the directions above (with the new recovery). Then back up your user apps + app data.
Whether or not you do this, you should move to Froyo with a full-Odin package. Download the ROM you want (either Nameless, Super Clean, or whatever) in zip form to your SD card. Follow the directions here (under "Most Thorough Method of Fixing Every Problem You Might Have") using the first two files here and the recovery I mentioned in my previous post. Yes, this is sort of overkill, but better to avoid stuff like corrupted dbdata from the beginning and not have to fix it later.
You might want to wait a day or so because it looks like jt is finally fixing up Clockwork.
EDIT: I read almost all of the 52 pages of the DL30 thread to realize that DL30 is out of date . I guess Its going to be EB01 or Superclean. Do you know if Superclean has the audio out via USB working for the docks?
I have some questions in regards to picking ROMs:
I am a little confused in where to find the latest versions. For example in the "most thorough me..." thread, there is a link to super clean version form 3/30/2011 yet wiki has super clean from last year. Where can I look at all the ROMs and descriptions?
Which froyo ROM would you recommend? I love Google's stock froyo, but I also want to use the fascinate's USB audio out on the car and desktop dock. I also would like to wifi tether.
Thanks again!
This post had a link to download ODIN but it was removed. Could you please provide that link again. It also had a link to "Samsung Drivers", don't I need that too?
I am going to take a shot at following the ""Most Thorough Method..." steps tomorrow morning and install superclean on my Facinate. Quick Q: In step one, it simply says to ODIN EB01. I can just do this without being rooted?
Also, you said jt is fixing up clockwork. What do you mean by this, what exactly does not work?
I know these are noob questions, but I am just starting out with this.
Thanks
Driver links are here. Odin is here.
Yes, download mode lets you Odin in complete firmware packages without root.
Most people are using Super Clean, so that has the most support (and themes), but there are some odd issues floating around with it. My guess is that a lot of those issues have to do with not cleaning up in the super-thorough way I'm suggesting, and with the permissions bug after flashing a theme (below). There's also navendrob's EC10-based "Nameless" ROM, and ahmgsk's DL30-based "TrulyFascinating" ROM. Nameless is good but he's about to drop a version 4 with a lot of fixes, so you might wait a day or so for that. TrulyFascinating seemed to be pretty good (heavily stability-tested), but he hasn't updated it in a while (busy with more recent Epic leaks, I guess). You might try running it with one of the state-of-the-art EC10 Voodoo kernels.
There are a couple of Clockwork bugs, but the one causing the most current problems is that the old one couldn't fix permissions properly. This causes issues after making a change to the /system after the initial ROM flash, generally when you flash a theme on top of it. The new one I linked above *can* fix permissions, but still requires you to manually mount /dbdata beforehand (actually, go to the "mounts and storage" submenu and make sure /system /dbdata and /data are all mounted -- that is, the option referring to them says "unmount", which will happen when they're mounted -- before you go to the "advanced" submenu and run the fix permissions script). The new new one coming soon will just fix it without a problem, and do other stuff too.
Once again thanks. I have everything I need....or so I thought.
I restored my phone to factory, loaded the drivers, fired up ODIN and added the PDA and PIT. I hit start.... nothing happens. "All threads complete, succeed 0 / failed 0"
Looks like I am missing something. Do I need to somehow tell ODIN where the phone is? I don't see a way to do that.
PS in step 4 its states "ODIN the CWM Recovery package ROM from this post". Does CWM bin file go into PDA or phone in ODIN?
I one again apologize for my noobiness.
The Clockwork step comes after you do the full package and boot with that.
Make sure you have Odin open *before* you connect the phone in download mode.
I install the clockworkmod for set up the GTAB rom...
but now i want to return to the stock recovery...so how to uninstall clockworkmod?
thanks!
savage,
You install CWM to replace the stock recovery. Therefore, you have to re-install the
stock recovery. If you were using a stock rom like say 3588, you would just reinstall
the rom again and let it overwrite CWM.
But since I don't know what rom you are using, you need to check the source of
your rom, make sure it contains the stock recovery -- and then inquire of the issuer
of the rom whether or not you should re-install or do some other special procedure.
Rev
thanks！ Now i am using the VEGAn-Tab Build rom~
so what should i do next?
sorry for the confusion~
GTAB ROM is not granular enough - you running stock or a modded ROM? If so, which ROM?
I can reply for TNT Lite 4.3.0+ or gADAM 1.3.0+ - there's a script setup to go back to standard recovery. If you are running either of these, please see my first posts on those ROMs for instructions on what to do. Again, this is only if you are running TNT Lite or gADAM.
You can also attempt to flash standard recovery using a build 3588 standard recovery firmware image in PART3 here: http://forum.xda-developers.com/showthread.php?t=1005080
savage,
EDIT: roebeet answered you first so I'll just stand by and see what y'all do.
Good luck!
Rev
thanks！ Now i am using the VEGAn-Tab Build rom 5.1.1~
so what should i do next?
sorry for the confusion~
problem with installing CWM
I got my gtablet yesterday and tried to install CWM v.8 using external micro SD card. It looked like it was half way done because it could not reboot by itself and stuck at a screen asking for reboot. So I selected reboot but it did not reboot. I had to force it to close. When I pressed volume+ and power, it had this message on the upper left coner: Recover key detected, booting recovery kernel image and 3 birds in the middle of the screen. It stuck there forever without doing anything. I only installed Z4root and nothing else. How can I remove the half-done CWM and redo it again. If I can do it again, what should I look out to avoid the same error?
yu203964 said:
I got my gtablet yesterday and tried to install CWM v.8 using external micro SD card. It looked like it was half way done because it could not reboot by itself and stuck at a screen asking for reboot. So I selected reboot but it did not reboot. I had to force it to close. When I pressed volume+ and power, it had this message on the upper left coner: Recover key detected, booting recovery kernel image and 3 birds in the middle of the screen. It stuck there forever without doing anything. I only installed Z4root and nothing else. How can I remove the half-done CWM and redo it again. If I can do it again, what should I look out to avoid the same error?
Click to expand...
Click to collapse
If you got your tablet yesterday, then it probqbly had firmware 1.2.4349 on it, which is a 1.2 bootloader firmware. You tried installing a CWM made for a 1.1 bootloader. how much research did you do prior to modding? Seeing as you installed Z4root, I'd imagine that you didn't do much, as it's not needed at all to root your G-tab.
go to http://viewsonic-gtablet-for-dummies.webs.com/ and start reading at "START HERE" to get an idea of what your dealing with, and what you can and can't do...look through the entire site!
to get out of where you are now, and back to a workable base, follow the "CODE RED" instructions here: http://viewsonic-gtablet-for-dummies.webs.com/
Lastly...don't do anything else silly until you've read and understand all of the instructions on Goodintentions site...it's a GREAT resource and should be a pre-requisite for all new G-Tab owners.
Hey all. I just got a new G Tablet and am trying to install CM7 I was following the instructions to the letter from (Since I an't post links, just google this) Cyanogenmod G Tablet Wiki Full
I got through the 'Installing ClockworkMod Recovery' part and everything appeared to finish successfully.
After rebooting the device, I tried to boot into Recovery to install CM7 and the device just freezes on the ViewSonic splash screen. The screen says 'Recovery key detected Booting recovery kernel image', but it just sits there.
I am able to boot the device into the stock OS, but I can no longer get into recovery.
What can I do?
Tap UI Version: 1,2-4349
Kernel Version: 2,6,32,9-00001-g0e0c333-dirty
Build number: FRF91
Thank you in advanced for your help. Please let me know if there is any other information you need about my device.
Andrew
The key to your post is
Tap UI Version: 1,2-4349
Click to expand...
Click to collapse
You're on the 1.2 bootloader, and CWM .8 will not work on it. There is a versio nthat WILL work, but I, unfortunately don't know the exact link to provide for you. I'll attempt to look it up and get back to you, though.
basically, your G-Tablet, was at some point, updated with the most recent OTA update provided by viewsonic. The update was pulled 24 hours after it was released. You're not lost with 1.2...you have many options. You can either stay on 1.2 and flash any of the many 1.2 roms...some are listed in the development section, others can be found on "another" forum.
If you need CM7, then I suggest that you follow the "foolproof flash to stock 4349" thread, (http://forum.xda-developers.com/showthread.php?t=1039000) but STOP once you've successfully flashed STOCK 3588.
3588 is on the 1.1 bootloader required for CM7.
EDIT:
I also find it interesting, it appears that pershoot's kernel has been installed already? Was this a brand new out of the box G-Tablet, or a used one? I am actually hoping that it's used. If it's NEW, then VS needs to explain how it came with a redacted update AND a custom kernel...
THANK ROEBEET FOR THIS:
Since I can't link to another forum, I decided to copy and paste. If people are going ot come ot XDA with issues involving the now taboo 1.2 bootloader, then they'll need to admit that the only way to help them is to link to a forum that everyone is migrating to.
Download
clockworkmod v3.0.2.8 (1.2 branch / NIA rev5) Link: http://www.mediafire...2flqn8b10ebcq44
md5sum: ac4d728d74a6b608cce588d2649e79f3
(updated on 5/15/2011)
clockworkmod v3.0.2.8 (1.2 branch rev2) Link: http://www.mediafire...x61q8jlu2dx8i9u
md5sum: 48c0c40175ab38cebc1199f9d3be8a7d
(updated on 5/05/2011)
THIS REV2 VERSION HAS BEEN TESTED MORE, but nandroid restores are not working properly. Rev5 corrects that, but I need more testers to confirm stability, please!
Many thanks to bekit and rothnic, for their work with clockworkmod!! Their documentation is what assisted me to get this functioning.
NOTE ON CWM: Do not use the Android GUI tool to wipe user data, or else cwm will get stuck in a reboot loop! If this occurs, there are two ways to fix this:
1- ADB required
In clockworkmod, go to mounts and storage and mount /system. Then, run this on your local PC:
adb shell
cd /system/bin
./fixrecovery.sh
Then reboot. What should occur is that standard recovery should pop up and complete the data wipe. On the next reboot, you should be able to get back into the GUI.
2- nvflash required
Using the 4349 nvflash image, run this:
nvflash --bl bootloader.bin --download 9 part9.img
Then reboot. What should occur is that standard recovery should pop up and complete the data wipe. On the next reboot, you should be able to get back into the GUI.
Click to expand...
Click to collapse
TJEvans (is it ok if I call you TJ for short?) thank you very much for your help, I appreciate it very much. I'm sorry if confuse some terms here as I try to address your posts inline below, but I would definitely still consider myself a novice at this process of installing custom roms.
TJEvans said:
EDIT:
I also find it interesting, it appears that pershoot's kernel has been installed already? Was this a brand new out of the box G-Tablet, or a used one? I am actually hoping that it's used. If it's NEW, then VS needs to explain how it came with a redacted update AND a custom kernel...
Click to expand...
Click to collapse
This is a brand new G Tablet. I litteraly got in the mail today from Tiger Direct. I'm wondering if the Clockworkmod I tried to install is responsible for the custom kernel.
TJEvans said:
If you need CM7, then I suggest that you follow the "foolproof flash to stock 4349" thread, (http://forum.xda-developers.com/showthread.php?t=1039000) but STOP once you've successfully flashed STOCK 3588.
3588 is on the 1.1 bootloader required for CM7.
Click to expand...
Click to collapse
I don't necessarly need CM7, but that is what I have on my Nook Color, and I really like it.
The main question I have is that right now, I cannot get into clockwork or stock Recovery at all. I do have adb working, so I would think my next steps will require me to use adb.
At the moment since I can't get to recovery I seem to be stuck. Is there a process somewhere I can get recovery working again using adb?
OK...let's try something. It looks like you may actually be in stock recovery, but there's nothing for it to recover.
do you know of a way to get a file and a folder onto your internal SD?
if so, let's edit the instructions to be able to flash to 3588 stock...
What you need:
1. A stock 3588 image renamed to 'update.zip' (http://tapntap.http.internapcdn.net/...-3588-user.zip)
2. A folder called recovery with a file in it called COMMAND inside it with the following line of text:
Code:
--update_package=SDCARD:/update.zip
Click to expand...
Click to collapse
if yo ucan get those on the SD, then when you reboot, the stock recovery will run and install stock 3588 1.1 based rom and recovery, then you can install your CWM .8.
I have never used NVFlash or ADB, or APX...I have no experience with them. I'm just here helping people that have compatibility issues between 1.1 and 1.2 bootloaders.
After all, the key to fixing problems, is to first find out what the problem is...
I wish I could help more, but I've seen more and more people softbrick their g-tabs by using NVFlash than anything else. I'm not ready to go messing around with my own root files, yet.
If you can get that file, and that folder onto your SD, then stock recovery will automatically recognize it and run it...
I may have just really screwed things up. I ran 'adb reboot recovery' and I gets to the Splash screen with 'Booting recovery kernel image' and gets stuck. Now, I can't get into the device at all.
Also, none of the links in your posts seem to work for me.
try them from the original post, then:
http://forum.xda-developers.com/show....php?t=1039000
sorry, like I said, I'm not a techy...just a guy that doesn't like to see people suffer...
TJEvans said:
THANK ROEBEET FOR THIS:
Since I can't link to another forum, I decided to copy and paste. If people are going ot come ot XDA with issues involving the now taboo 1.2 bootloader, then they'll need to admit that the only way to help them is to link to a forum that everyone is migrating to.
Click to expand...
Click to collapse
It's far from being taboo since it's the honeycomb bootloader... their recovery was blue for a reason...
maybe they pulled those OTA update because they had not licensed honeycomb anyhow, 1.2 is perfectly good to install as long as you use a 1.2 compatible kernel you can even use non 1.2 rom!
Ok, I was able to get the device working again using NVFlash. (http forum,xda-developers,com/showthread,php?t=861950 replace commas with periods).
Now, I have the following:
Tap UI:1,1-3588
Kernel is still: 2,6,32,9-00001-g0e0c333-dirty
I don't know anything about this kernel, or how I got it, other than maybe it came with my first errant clockwork install.
Can you give me some pointers on how I should proceed? (I would still like to get to CM7 at some point, but I don't know if I should get a different kernel or go back to the stock kernel as well)
GREAT NEWS....glad you god it running so far.
OK, that may be the stock kernel...the numbers looked familiar to me, and I've never seen the stock kernel on that report...so, I may be mistaken.
in any case, you are now back on stock 3588 1.1 bootloader...
Now, you should be able to install the CWM .8 that you tried before, and flash CM7 from there...basically, follow the guide you followed before. but this time, it should work fine, since you are on the right bootloader.
Just remember, research ANY new roms you want to try to make sure what bootloader they are on.
to P00r:
as long as you use a 1.2 compatible kernel you can even use non 1.2 rom!
Click to expand...
Click to collapse
see, I didn't even know that...
The thing I'm seeing, is that Clemysn posted the BOS infromation here, and tried to emphasize that it's a 1.2 Rom...The 1.1 rom's though, do not indicate that they are 1.1 Roms. when 1.1 was all that existed, it made no difference, but now that there is another option, they should at least make sure to add "PLEASE BE SURE YOU ARE USING A 1.1 BASED BOOTLOADER BEFORE FLASHING THIS ROM!!!"
As you can see from Imarikinrat's post, he bought a supposedly factory G-Tablet with 4349 prepackaged on it...now, granted, you and I both know that it's more than likely a refurbished one, as I can't see Viewsonic intentionally releasing product with a bootloader and firmware that was pulled from their updater...
in any case. Roebeet kinda predicted that this would happen a bit. Since most moderators on XDA downplayed the impact of 1.2, it's gone fairly ignored. Think about Imaricanrat's post for a second. Had he not posted his system information there is no way that we would have known that it was a bootloader conflict. It would have been assumed that he was on 1.1 bootlaoder with a "brand new" g-tablet (seriously, man, I'd check that thing with a magnifying glass to make sure that there are no scratches or anything that would indicate that it was anythign other than BRAND NEW)
anyway...had he not posted that he was on 1.2, then who knows what advice he would have been given.
Well, now I'm back to my original problem. I cannot get into Recovery. When I start holding Power and Vol+, I see 'Recovery key detected Booting recovery kernel image' it then goes to the 'gtablet' splash screen then quickly into a screen with a box with an arrow and a progress bar (the progress bar has the candy cane animation and nothing happens for all of 3 seconds) then the device reboots.
I have tried putting the recovery folder and update.zip in the internal memory, and on an sd card to no avail. Any other suggestions?
that most certainly sounds like stock recovery to me...
I'm at a loss...it worked fine for me when I flashed to 4349 from stock 3588...just ran and installed, then I ended up on 4349 stock...
you're following the CM7 install guide? Or are you trying to install CWM at this point? I never installed CWM myself, as mine came with it on it.
I'm trying to install clockworkmod so that I can install CM7. Is that the right way to do it? I know there was a stock recovery gui that I cannot get into now.
as long as the recovery folder is on the SDcard, it will automatically attempt to run it...
picture it this way...remember back in the day of windows 3.1 In some cases, if you inserted a floppy disk with a boot file on it, it would check there first, then boot from internal memory...
So, the recovery folder is telling it to run the file in it, which unpacks and installs the update.zip.
once again, though, I never installed CWM myself, but from what you're saying, it should be working.
what happens if you remove the folder and file (after running it), and attempt to go into recovery again?
When I remove the file, folder, and SD card and try to get into recovery, I see 'Recovery key detected Booting recovery kernel image' it then goes to the 'gtablet' splash screen then quickly into a screen with a box with an arrow and a progress bar (the progress bar has the candy cane animation and nothing happens for all of 3 seconds) then the device reboots.
hmm...the box with the arrow and progress bar indicates that it's trying ot run something from recovery...weird..
ANYONE ELSE???
I'm not experienced enough to help...anyone else know enough about flashing CWM from stock, or flashing CM7, that can help out, please chime in.
thanks.
and sorry Imarican...I tried, but once again, no techie here.
No worries man, thanks for your help. Have a good night.
Update: Ok, I think somehow this whole process messed up the 'Recovery Partition' on my G Tablet for whatever reason. When I performed the NVFlash back to stock, it managed to 'fix' the majority of the device, allowing me to boot normally into Tap UI:1,1-3588. However that flash did not fix my Recovery Partition.
With all of that in mind, I found instructions on XDA to install 'clockworkmod via nvflash' (Since I still cannot post links, just google that and it should be the first link, also it's XDA thread 1058649).
After following those steps, I am now able to boot into Recovery which is now Clockwork Mod Recovery, and hopefully *crosses fingers* be able to flash CM7.
Given that I will probably never go back to stock anything on this device, does anyone know where I can download the 'Stock Recovery' for the G Tablet?
so is the point of this article Tiger direct sell used products as new?
so is the point of this article Tiger direct sell used products as new?
Click to expand...
Click to collapse
unconfirmed...what we know is that he had 1.2 4349 out of the box, stock firmware. There are a few possibilities. This could be a Tiger Direct return that was repackaged and sold as new. It could also be a direct from VS return that was repackaged as new, OR, VS actually sent a stock of G-Tablets to Tiger Direct that were packaged with the 4349 firmware on it.
Either way, people need to be careful when flashing roms and such. XDA has not, so far, made it clear which roms, kernels, and CWM versions are good on which bootloader. Some have been asking that devs start exiting posts to indicate which bootloader is needed for each mod, to attempt to avoid confusion.
We must also realize that new G-Tablets are being bought every day, and not every owner is knowledgable of the issues of the recent past, with VS, NVidea, 1.1, 1.2, etc. Most people probably, reasonably, assume that they can open it, root it, and start flashing whatever they want, not even aware that there is a difference.
Hi,
i just got my G tablet recently and I decided to install Clockworkmod and TNT Lite.I followed instructions to install Clockworkmod using the a USB cable and it worked perfectly.I installed v3.0.2.8.Then, I downloaded TNTLite and moved the update.zip file to the root.When I did that, the only option to put it on the root was to replace the update.zip file from Clockworkmod with the new file from TNTLite.I went ahead and installed TNTLite and installed pefectly.I booted the tablet but it got stucked on the splash page with the Viewsonic logo.I don`t know what I did next but now every time i boot it goes straight into Clockwordmod.I reboot and doesd the same thing.When the splash page appears, in the top left corner it says:booting recovery kernel image.
Can anyone help me?
There are a couple of issues here.
First of all you need to determine which bootloader your gtab is on. There is a sticky which will help you with the whole bootloader issue. You are likely on 1.1, which is incompatible with the version of clockwork you loaded. You need clockwork .08 for the 1.1 bootloader. v3.0.2.8 only works with the 1.2 boot loader.
TNT lite has been retired, and although it is a solid ROM, it isn't being actively developed. The active "version" of TNT lite is hosted on slatedroid and is called Mountain Laurel (almost certain of the name, but I could be mixing them up). Both of those are based on the 1.2 bootloader.
Also TNT lite and Roebeet's other mods are typically installed via standard recovery rather than clockwork mod. This is at Roebeet's recommendation, and should have less rick of brickage.
Goodintention's site http://viewsonic-gtablet-for-dummies.webs.com/ should get you up to speed.
Your best bet at the moment may be a full restore with nvflash, which you can read about on the site above. The site will also help clear up the 1.1 vs 1.2 issues.
Thank you very much for the post!
I will follow your instructions and I will post a message tonite with the results of my experiment
Wish me luck
Good luck. Be careful though, my instructions are only a quick guideline, be sure to stick to gtab for dummies site, or something like of these tutorials:
http://forum.xda-developers.com/showthread.php?t=861950
http://forum.xda-developers.com/showthread.php?t=865245
I`ve got it back to stock!!! Thank you!!
Now, I have to install a ROM on it. I will post back the results!
Thank you again! Any tips on getting a ROM installed?
adirom28 said:
I`ve got it back to stock!!! Thank you!!
Now, I have to install a ROM on it. I will post back the results!
Thank you again! Any tips on getting a ROM installed?
Click to expand...
Click to collapse
You really need to go to my site gtab for dummies linked in my signature. There you will find step by step instructions on how to flash (install) a new rom. I hope you used the files provided on my site because the nvflash on my site came with cwm pre-installed. And on my site, you will also find a list of all available roms at this time. Just go there and see for yourself. Make sure you use the "start here" page.
If your on stock 3588 then this tutorial is a great reference guide:
http://forum.xda-developers.com/showthread.php?t=865245
As for installing a ROM it's pretty straightforward and it doesn't sound like you'll have much trouble. Vegan Froyo and Vegan Gingerbread are great solid roms. There's a lot to try out so have fun.
Thank you very much for your help! I will work on this tomorrow and post the results!
Really appreciate your help! Thanks!
adirom28 said:
Hi,
i just got my G tablet recently and I decided to install Clockworkmod and TNT Lite.I followed instructions to install Clockworkmod using the a USB cable and it worked perfectly.I installed v3.0.2.8.Then, I downloaded TNTLite and moved the update.zip file to the root.When I did that, the only option to put it on the root was to replace the update.zip file from Clockworkmod with the new file from TNTLite.I went ahead and installed TNTLite and installed pefectly.I booted the tablet but it got stucked on the splash page with the Viewsonic logo.I don`t know what I did next but now every time i boot it goes straight into Clockwordmod.I reboot and doesd the same thing.When the splash page appears, in the top left corner it says:booting recovery kernel image.
Can anyone help me?
Click to expand...
Click to collapse
Just to add my two cents - it looks like you are mixing up 1.1 / 1.2 dev branch items (luckily you didn't soft-brick!).
TNT Lite is a 1.1 ROM (no longer being developed), but my 3.0.2.8 rev5 cwm is for the 1.2 bootloader, so they aren't compatible. Perhaps you used another 3.0.2.8 that's not mine?
"Mountain Laurel", over in Slatedroid, is he successor to TNT Lite. It's based off stock 4349, and it's 1.2 dev branch based.
As for the cwm reboot issue, did you try and wipe data in the UI, with cwm installed? If so, the "cwm forever reboot" is known to happen. The "fix" is to get standard recovery installed so that way the data wipe completes.
roebeet said:
As for the cwm reboot issue, did you try and wipe data in the UI, with cwm installed? If so, the "cwm forever reboot" is known to happen. The "fix" is to get standard recovery installed so that way the data wipe completes.
Click to expand...
Click to collapse
I too am stuck in CWM. I was on the 1.2 ROM branch, and was using the CWM v3.0.2.8 (1.2 branch). How did you get out of CWM? I'm guessing you had to do a nvflash - I've done that before, but how do you get to the APX screen? (if that's what you did).
Roebeet also said "As for the cwm reboot issue, did you try and wipe data in the UI, with cwm installed? If so, the "cwm forever reboot" is known to happen. The "fix" is to get standard recovery installed so that way the data wipe completes."
1) yes I did a wipe data using CWM but not sure what Roebeet meant by "UI (user interface), with cwm installed" - I'm not sure how else I could do a CWM data wipe using the UI?
Edit: got it. In the UI, sometimes under Security, you can do a factory/data wipe from there.
2) The "fix" " is to get standard recovery installed - what is the "standard recovery"? and more importantly, how do I install it?
Edit: Is the standard recovery - going back to the gtab stock (depending on what branch you are on)?
So, after owning my Transformer Prime for about a month now, I decided to take the plunge and root it. I followed the instructions for ViperMod and had it rooted in no time. I then followed the instructions of unlocking the bootloader and finally installing OTA Rootkeeper.
I've had rooted devices in the past (Droid Incredible) and am familiar with RomManager. So I installed RomManager on the Transformer Prime. I then attempted to create a backup of my "current Rom", which is just stock ICS. RomManager prompted me to update Clockworkmod Recovery, which I did (I now have 5.8.2.0 installed). It then rebooted...acting like it was backing up my current Rom, but when I got back into RM, and clicked "Manage Backups" and there was nothing there. I tried once more with the same result, and ultimately gave up on backing up my current config.
I then downloaded Cyanogenmod 9 (nightly). I selected Google Apps and it proceeded to download. I got an error that the Google Apps portion had an error, but it seemed to work when I attempted to download it again.
I then proceeded to attempt to install the new Rom. The menu came up, asking if I wanted to wipe data and cache, wipe dalvik and backup current rom. I selected all three and hit ok.
My tablet rebooted...quickly, and did not show any signs of installing Cyanogenmod. Sure enough, I got my stock ICS...no Cyanogenmod. I tried again...same thing. I tried a third time, and RomManager hung when I tried to select Ok after the options of backing up, etc. Ultimately I got the error popup, asking if i wanted to wait/report/ok. I hit ok.
I then...very stupidly in retrospect...performed a factory reset from within the phone's settings menu (something I've later read is a big no no). This time, when my phone rebooted, it went straight into Clockworkmod Recovery, which is where I am now. Stuck. I've read a ton and tried everything but had no success.
Strangely, I can find the cyanogenmod file by navigating through "install zip from sdcard", then "choose zip from sdcard", then "clockworkmod", then "download", then "get.cm", then "get" and finally "update-cm-9-20120301-NIGHTLY-tf201-signed.zip". And it allows me to update using this file...even giving me the message "Install from sdcard complete"...but nothing happens. I'm still stuck in Clockworkmod.
If anyone has any advice, I'm begging for your help. Really hoping I didn't ruin my brand new tablet...
Thanks.
only thing rom manager is gold for on the prime at the moment is getting the latest CWM version. other than that, trying to flash a rom, reboot into recovery, or backup doesn't work in rom manager for prime. everything needs to be done through CWM itself. whether flashing a rom or making a nandroid backup. so you have to manually go into CWM and try flashing from there. did you make sure the roms were stored on internal memory to flash(I believe it can only be done on prime this way at the moment)? try a different rom as the CM9 has alot of bugs n issues at the moment. try flashing virtuous rom or a stock modified rom from developement.
also check out developement section for a thread called the Di's n Donts of unlocking and thread called how to or not unbrick your prime. answers you seek are in there.
See my unbricking thread
http://forum.xda-developers.com/showthread.php?t=1514088
Thanks so much for your help guys!
to demandarin: Unfortunately the only ROM I downloaded before everything went haywire was the nightly cyanogenmod 9 from yesterday. And as I explained, that ROM doesn't seem to be flashing for me... I've tried downloading other ROMs onto my SD card, but I can't seem to get my Prime to recognize the SD card in CWM, and I can't figure out any way to get ROMs onto my prime...now that its stuck in recovery. Do you know if I can load ROMs onto my Prime at this point?
to Diamondback: I read your unbricking thread and its given me some hope. It sounds like I'm falling into the "1a" category. I'll have to bunker down tonight and see if I can work through those instructions (I have no familiarity with ADB at this point, which is my main concern). Anyway, I very much appreciate you pointing me in the right direction.
I am curious though, is there some place I can look for clarification on what works in RomManager and what does not? None of that was made clear in the app itself, so I just assumed it was fully functional, like it was on my Dinc. Now I'm paying the price...
Thanks again.
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
demandarin said:
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
Click to expand...
Click to collapse
Thanks, but I actually do have the latest version of CWM (5.8.2.0), according to the link you provided. The thing is, I'm just very unfamiliar with CWM, or really any recovery software. The link you posted notes the following improvements:
-Possibly fixes bricks (by properly restoring boot.img)
-Correctly comes with Staging/System unmounted
-Nandroid Restores properly the boot.img (of backups created with this CWM). This means no more issues when restoring a Rom if you are coming from another from (for example, if you are restoring Virtuous after wiping cm9)
Which all sounds great, but I have no idea how to really use any of that... Does "possibly fixes bricks" apply to my situation? I've tried selecting restore and advanced restore through CWM, but in both situations it says "cannot find files", which I'm assuming are the "boot.img" being referenced. So again, it seems like I'm hosed...
I'm just really hoping that Diamondback's unbricking method works for me. Though, I'm having a hell of a time finding instructions on how to setup ADB on my PC (Windows 7). Do you know where I can find good and current instructions?
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
demandarin said:
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
Click to expand...
Click to collapse
Thanks again! I think I need a tutorial on how to search XDA more effectively
SUCCESS!
Well, it took some jumping through hoops, but once I got ADB set up successfully, Diamondback's instructions worked like a charm!
For anyone encountering this thread with the same issues as me, I've included links to all of the sources of data I ultimately used.
Thanks so much for everyone's help!
Installing ADB
http://forum.xda-developers.com/showthread.php?t=1427008
http://www.youtube.com/watch?v=ZY4KSrgi-rE
I had to use the PDANet method, referenced in the Youtube video
http://junefabrics.com/android/download.php
Diamondback's Instructions for Unbricking the Prime
http://forum.xda-developers.com/showthread.php?t=1514088
Perhaps I spoke too soon...
My device is no longer bricked, but now I can't access CWM, can't factory reset...can't do anything. I'm stuck with a very broken build of Cyanogenmod 9
Here's the link to my new thread:
http://forum.xda-developers.com/showthread.php?p=23349041#post23349041