[Q] the process android.process.acore has stopped unexpectedly - G Tablet Q&A, Help & Troubleshooting

Gtab- Stock 3358.
Previously I had Stock 3358 and rothnics enhancement pack. I installed an app from the market. As soon as I started the app the gtab screen went blank. Then the TapnTap logo as if it was rebooting then within 2 sec I was back at the home screen. If it rebooted it was a heck of a fast reboot.
then I started getting the error. Everything except stock email and settings work. But the error message pops up every few seconds. I can't go to settings and wipe. So I attempted to install stock 3358. it went fine but problem persist. Still can;t go to settings to check version or do a afactory reset.
Any and all help is appreciated.

+1
I had same problem and after debating the right courses to take, I nvflash'ed the device and started over again.
Still would like to understand that caused that error ?

This usually occurs as the result of contacts in your contact folder with blanks in the name fields. Delete any entries with blanks and you should be good to go.
PS. You will get faster resolution if you search before posting as this has been asked and answered several times in past week.

I have same problem...."The process android.process.acore has stopped unexpectedly. Please try again"
I went into my google account, deleted or put names in contacts that didnt have names, rebooted and still having problem. I tried going into the data/data file, but there was no data file to delete as indicated on other threads. There is not an easy to find thread for this problem. Please help or at least direct me.
Thanks!!!

I never had any contacts saved. Regardless I cannot even open the contacts folder to add/delete anything.
I am having problems with, email, contacts, settings. as soon as I attempt to open any of the above it gives the FC message and takes it back to home.
On the other hand I called Gtab support. As soon as I told the probelm the lady asked me if I could go to settings. Once I told her no I cannot she said you have to send the unit back for repair. She said that she helped another individual yesterday with exact same issue.
On aside note I was able to delete most of my apps using ES file explorer.
@Bekit @rothnic or other senior members is there any solution beside nvflash. I am a newbie.
thanks.

I had the same problem in February and fixed it by searching this forum and finding pieces to put together a solution. The rest of this message is what I posted back on 2/24/11. I think the important part is to repartition your SD card and clear all user data. I have had no problems since I did this fix.
Good luck.
I have had my GTablet since early December and have been running the Stock Enhancement since early January. I have had no problems except for a very occasional unexpected stop. It was never a real problem.
Yesterday I started getting the android.process.acore error literally anytime I tried to use any application. To my knowledge, I had not installed anything recently that would account for this.
The good news is that I followed multiple threads here and came up with what seemed to be a reasonable solution.
I installed Clockwork and reset the partition to 2048/0 as suggested by several posts. I also cleared everything that I could clear using their menu.
Then I installed NVFlash which I believe put me back to the plain vanilla factory OS. (I also think this wiped out Clockwork Mod but I'm not positive.)
I got the "update available" message and did the OTA update of the OS.
Then I installed the TnT Stock Enhancement update and applied the Market Fix.
Everything seems back to normal now.
I want to thank all of the forum members who posted the various instructions that allowed me to piece together this solution.
I realize that not everyone has the same issues when problems occur so there isn't one single fix that is right for everyone. I didn't really understand that until I had this problem. I feel lucky that I've had relatively no problems.
I have to admit that I'm looking carefully at the Motorola Xoom because I suspect it has a much more stable hardware/software infrastructure but I would rethink that if the Viewsonic folks would be more forthcoming about their plans to support upgrades for the GTab. I can live without 3G if I have stability.
Thanks again to all of you experts out there in xda-developers forumland.

Stuck SD card
I am having the same problem and tried to do the restore from the SD card and now the card is in the slot and I cant access the settings to eject it. to run the clockwork mod is there any way to force it to boot the clockwork mod?

For me, Clockworkmod "wipe data/factory reset" eliminated the pesky force close message about android.process.acore that several of us seem to have. NVflashing & Contacts data field corrections did not work for me. The problems seemed to come up after downloading an app from market.
Running VEGAn 1.00 beta 5.1.1 supplement, and happy!

got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.

I called CS yesterday. They help me delete most of the apps that I downloaded to see if that will fix the issue. That also helped in eliminating any personal data left behind in case I have to RMA the unit.
that makes my tablet completely stock. I don't have market any more. So can't get clockwork rom manager etc. Bigger probelm is the onscreen keyboard doesn't work either gives the error message.
I did some reading on how to NV Flash the device. Still trying to understand the process.
I have two options
1. NV flash the device and hope that everything still works.
2. I bought sears insruance. Just return the device and then be done with it.
Any help is much appreciated.
My experience level is limted to flashing stock and enhancement packs using the Power and + buttons.

You don't want to use the clockwork in Rom Manager. It doesn't work for the G Tablet.
Here are a couple other options off the top of my head...
1) cwmod for install from Micro SD card http://forum.xda-developers.com/showthread.php?t=865245
2) Try calkulin's format all http://forum.xda-developers.com/showthread.php?t=985705

flanghor said:
For me, Clockworkmod "wipe data/factory reset" eliminated the pesky force close message about android.process.acore that several of us seem to have. NVflashing & Contacts data field corrections did not work for me. The problems seemed to come up after downloading an app from market.
Running VEGAn 1.00 beta 5.1.1 supplement, and happy!
Click to expand...
Click to collapse
same thing with me. I downloaded a few apps and then I got it. Did the data wipe thing. Came back in and I am still getting the error. Not happening every 5 seconds, but still getting it.

okay, this is strange. I did the data wipe and I was still getting this error. After doing the market fix and got all my downloads available, I noticed that I am only getting this error when I hit the HOME button.
I hit the Home button and the error comes up, then the Android Market comes up. This only happens now when I hit the Home button. Error, Market comes up and I have to hit the Home button again to get home.
HELP!

only the home button
confirmed. Working on this the last 30 minutes, I am only getting this error when hitting the home button.

@ K J Rad
I downloaded caulkins format all zip. Now this may sound a silly question. Do I flash it like changing its name to update.zip and include the recovery file?
2nd question is if I am able to flash it successfully can I install the stock rom?

hipBob said:
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
Click to expand...
Click to collapse
Just wanted to say this single step worked for me as well.

Ok. Finally got rid of the problem.
First I attemted NVFlash. After some intial strugle setting up the drivers etc on windows got it to work. Everything worked but still had the exact same process.
B/w I noticed superuser still there. I thought NV Flash will bring it to out of box. Used Bekits image.
After some more reading took the plunge and did CWM internal. Dide wipe data. Rebooted and got it working again.
Again pardon my ignorance but do I have to manually update to 3358. And if I do it go stock would it get rid of CWM. How do i get it off the machine?
I would like to prepare for the OTA.
Please advise.
B/w it was fun going through the process.

Ok. Finally got rid of the problem.
First I attemted NVFlash. After some intial strugle setting up the drivers etc on windows got it to work. Everything worked but still had the exact same process.
B/w I noticed superuser still there. I thought NV Flash will bring it to out of box. Used Bekits image.
After some more reading took the plunge and did CWM internal. Dide wipe data. Rebooted and got it working again.
Again pardon my ignorance but do I have to manually update to 3358. And if I do it go stock would it get rid of CWM. How do i get it off the machine?
I would like to prepare for the OTA.
Please advise.
B/w it was fun going through the process.

Glad you got it working. Installing the stock 3588 update will replace the bootloader and removes CWM. That should leave you as close to real stock as you can get.
Oh, and welcome aboard ;-)

hipBob said:
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
Click to expand...
Click to collapse
Thank you very much, that was an incredibly painless fix. Worked on TnT-Enhanced v3.1.4b

Related

Please Help

I am running Vegen 5.1, I did the market fix, Everything was working fine.
I tried to buy bejeweled, and for some reason it would not download, It kept saying the download is starting, and it would show the downloading arrow in the notifications for about 3 seconds, then disappear, and nothing downloads.
Now I have tried to download different apps, and nothing will download?
I have ran thru the market fix steps 2 times again now, and that does not work.
Please can someone help me?
Common issue tonight....dont panic. I am guessing it relates to Googles conference Wednesday. Perhaps they are doing something. I had the issue...rebooted and was able to download the app I couldnt previously.
Sent from my Viewsonic 10" GTab...
Sounds like issue with your SD partition. You will need to repartition your internal to 2048/0. This is documented on the first post of the Vegan thread.
Well, I tried to do some stuff, and now I am stuck in bootloop.
On market Help from google, it said to go the mangae Apps Markey, and uninstall update.
So I did that.
Then I rebooted.
Then I did Market Fix steps.
Then I rebooted, now all it does is continue to boot.
Anyone? Please?
what im so lost
best actionis to install sgs tools apk. Apply script, market fix
Ok, I did the partition.
Now it boots back up, however everything looks like I just did a factoy reset, and things still don't download.
Where do I find sgs tools apk. Apply script, market fix
Market is having issues for ever device, including market supported phones...randomly tonight. Possible cause = Google conference tomorrow and possible market enhancements being announced.
Sent from my Viewsonic 10" GTab...
I see, so I created a bunch of work for myself in the name of learning.
I bascially just started ever with the reinstalling of the rom.
On the plus side, when you learn the most is when things go wrong. And I feel your pain - I had to reload everything from a bootloop as well
BigJohn
Fix
I had the same problem last night. I got it to download by going into settings/applications/system applications and clearing the data in the download manager. I had to do it for every download. BTW It seems to be working fine this morning.
...in the same boat
steveninspokane said:
I am running Vegen 5.1, I did the market fix, Everything was working fine.
I tried to buy bejeweled, and for some reason it would not download, It kept saying the download is starting, and it would show the downloading arrow in the notifications for about 3 seconds, then disappear, and nothing downloads.
Now I have tried to download different apps, and nothing will download?
I have ran thru the market fix steps 2 times again now, and that does not work.
Please can someone help me?
Click to expand...
Click to collapse
Hi all,
I didn't want to start a new thread but I hope someone sees this one as the main title is not descriptive at all.
I got my new gtablet three days ago (not a woot) and have been trying different roms (TNT 4.3.1 / Vegan 5.1) with no luck in the android market. As in the first topic, I tried the fixes for the market, clearing cache, data, even re-partitioning to make sure partition was 2048 | 0, turning off firewall in my router... EVERYTHING! I can see all the applications but as soon as I click to install it keeps in "starting downloading..." and could be there for hours without downloading a single bit.
Early in this topic the speculation was a google conference taking place but... that was February! Is anybody experimenting the same (frustration, haha)? How can I identify where the problem could be?
Thanks in advanece!
santasemilla said:
Hi all,
I didn't want to start a new thread but I hope someone sees this one as the main title is not descriptive at all.
I got my new gtablet three days ago (not a woot) and have been trying different roms (TNT 4.3.1 / Vegan 5.1) with no luck in the android market. As in the first topic, I tried the fixes for the market, clearing cache, data, even re-partitioning to make sure partition was 2048 | 0, turning off firewall in my router... EVERYTHING! I can see all the applications but as soon as I click to install it keeps in "starting downloading..." and could be there for hours without downloading a single bit.
Early in this topic the speculation was a google conference taking place but... that was February! Is anybody experimenting the same (frustration, haha)? How can I identify where the problem could be?
Thanks in advanece!
Click to expand...
Click to collapse
I'm right there with you and have yet to find a solution. It's quite frustrating.

[Q] Market Hanging on Downloads after 1.1.0

I've searched all over the web for this and all over XDA and there has been nothing conclusive. Hoping we can find something usable here.
Basically, market hangs on starting downloads and does not progress. I can tie the failure only occurring after I install the V1.1.0_r2 update and ensuring top to bottom I have met all the requirements. I work on about 4 NCs for family members and one of our has gotten V1.1.0_r2 working with Market fully functional. 2 of the NC's fail Market and have not tested the 4th since generally, only Market fails but all other functions on the NC work perfectly.
My system:
- 1.0.1 Auto Nootered
- Gingerbread keyboard
- Sideload hack
- Telephony Hack
Here are the symptoms I have found:
- All worked fine on 1.0.1
- Initial install of 1.1 worked for a bit but crashed on adfree host file update and did not work thereafter
- First notice was on Facebook download
- market.android.com can still push installs
What has not worked:
- Clearing Market data
- Clearing download manager
- Starting and stopping downloads
- ejecting or unmounting SD card
- fixing permissions does not work
I've seen this happen on 2 different Nook Colors but not on a 3rd and my personal SC I've repeated the failure across 3 complete factory wipes and resets with the same end result of a working Market that gets stuck on Download Starting.
Any ideas?
You don't have an Android phone, do you? This happens on every device recently, something with the market, has nothing to do with the Nook.
I disagree. I have a DINC and several nooks and I can force this to happen on the nook where the market works fine until I update to 1.1
I was having the same market download behaviour you describe the first few times I attempted a 1.1 upgrade. The thing that finally did work for me was doing a complete wipe of all data, all cache and complete factory reset, even back to the stock recovery partition. Then walked through the upgrade setting things up by hand and not restoring anything from backup. The market has worked fine for me ever since.
You mentioned doing complete factory wipes and resets, and if they were this kind of thorough wipe-everything back to out-of-the-box state reset and not just a restore from an old backup... then I don't know what to tell you. I assumed there must have been something buried in my data that was somehow causing the problem in 1.1, but maybe I just got lucky that last time.
fwiw, here's what I did in case you spot any differences that might help.
- "Erase and Deregister Device"
- wiped dalvik cache and cache partition from clockwork recovery
- used dd to rewrite boot and system partitions to stock out-of-the-box state (1.0.1 version)
- rebooted and went through B&N "first time" setup process, registered with my B&N account.
- auto-nootered
- rebooted and went through google's "first time" setup process.
- performed the whole youtube -> gmail -> google talk -> market setup dance
- installed clockwork rom manager from the market
- followed the 1.1.0 upgrade process
- rebooted and tested everything (including the market)
- started manually loading books and apps back on, avoiding backups made before the upgrade
I don't know if this is of any help, but it worked for me. And I hope someone figures out where the problem actually is before the next B&N upgrade, because I'd rather not have to do all that again.
I did the same thing as you but I did not wipe the dalvik cache. Weird thing was that I was able to get market to work immediately after the update but it stopped working after a bit. Couldn't tell what triggered it and I was only doing hard installs from market. No backups.
I restored to factory via 1.0.1 image several times to try and isolate the problem. It was not decisive since I do have one nook that competed all updates including an overclock and all functions seem to work perfect including market.
issues and FCs with V1.1.0_r2 update
Keep in mind I am a noob at all of this and am barely able to keep up with you guys, but I had problems with FCs and general instability after using the V1.1.0_r2 update and flashing one of the more "stable" overclocked kernals. In general I didn't like the direction my NC was heading and decided to begin again.
I went back to stock using this: http://forum.xda-developers.com/showthread.php?t=945838
and then applied this: http://forum.xda-developers.com/showthread.php?t=922870
and so far everything seems stable.
The people on these forums amaze me with their technical know-how.
Having the EXACT same problem here after doing a wipe and upgrade to auto-nootered 1.1.
After successfully downloading and installing roughly 20 apps, any new downloads now stop at the "Starting Download...." stage. Ive also tried everything short of replacing vending.apk to fix the problem -- nothing has worked. Ill be trying that next... I'll report back after.

[Q] Market Apps Fail to Download

A HUGE thanks in advance for any help you can offer:
I have a Viesonic G-Tablet, and I've flashed a couple of different ROM's on it - TNT Lite 4.4 and VEGAn-TAB 7.0 RC1.
LOOOOONG story short:
Tried to install Ubuntu, no luck.
Downloaded ZPad to try it out, installed. Didn't like it, used ClocworkMod to recover to a previous TNT Lite 4.4 install. From there, reflashed to Vegan...
And that's when the problems started. Namely, Market no longer works properly. None of my downloads are successful. It gives a "Download error - Download was unsuccessful, please try again."
So, after trying again to go back to TNT Lite and having the same trouble, I NVFlashed back to stock, wiped EVERYTHING per the directions on XDA, in the order prescribed - did everything by-the-book, and still no luck on any ROM. TNT Lite, Vegan - both of them adamantly refuse to download anything from the market.
I've searched to my wits end not only in this thread, but others as well. I've reset the data, reset the cache, uninstalled the market update - you name it, I've tried it.
Could it be your internet connection? Do other devices on your network download from the internet fine?
Thanks for the question. I guess I should have been a little more specific: Yes, great connection. I can browse the web fine, even download from Amazon's appstore - but that's where it ends. The weirdest thing is that I have noticed that I can download Firefox from the Marketplace, but literally - that's it. Nothing else, and I've tried close to 40 different apps now. All fail to download.
I've tried clearing the cache, etc...
I was even desperate enough to pretty much do a system wipe and come up clean. I used ClockworkMod to format everything - even the SDcard. Made sure to set the partition size to 2048/0, the whole nine yards. Wiped all the data, cleared/formatted cache, so I'm at a loss.
*UPDATE 4/18/11 - On a whim, I decided to use ClockworkMod to reset my User Data, and signed my tablet in under another Google account I had. As I type this, I'm downloading all the apps that I was unable to download with my "usual" account. So maybe there's a bug on Google's side? How would I even go about fixing that?
I'm having this same problem. NVFLASH and reFLASH numerous times and still no luck can someone please help. Can't install anything from market at all. it download and as soon as it finish dl and start to install it will restarted itself and nothing happen. please help. THanks
Exact problem I'm having. I've tried five different roms, from Vegan to CM7, to older TnT's and Calkulin's, nothing will let me download and install from the market. I did yet another full NVFlash last night and repartitioned the tablet, still no luck after flashing CM7. It started off allowing me to download a few dozen apps then giving me the download error, but now the first app I try gives me that.
Did anyone else here come down from TwoTapsX or another 1.2 based rom? Seems to me the issue started right about the time I NVFlashed down from that.
kitsunisan said:
Exact problem I'm having. I've tried five different roms, from Vegan to CM7, to older TnT's and Calkulin's, nothing will let me download and install from the market. I did yet another full NVFlash last night and repartitioned the tablet, still no luck after flashing CM7. It started off allowing me to download a few dozen apps then giving me the download error, but now the first app I try gives me that.
Did anyone else here come down from TwoTapsX or another 1.2 based rom? Seems to me the issue started right about the time I NVFlashed down from that.
Click to expand...
Click to collapse
tvguyjohn said:
*UPDATE 4/18/11 - On a whim, I decided to use ClockworkMod to reset my User Data, and signed my tablet in under another Google account I had. As I type this, I'm downloading all the apps that I was unable to download with my "usual" account. So maybe there's a bug on Google's side? How would I even go about fixing that?
Click to expand...
Click to collapse
I just tried this myself, sure enough I can download with another Gmail account, but not my main one.
This has to be an issue with Google...I am having the same issue also.
How the hell did I quote myself up there?
Mine is downloading again, all I did was sign in as my backup account, wipe data and dalvik cache, reflash then fix permissions. When i logged in again it worked. Don't know which step actuallly fixed it.
I just deleted the data under app management and they started working again for me.
Sent from my PC36100 using XDA Premium App
I had the same. Uninstalling Flash player seem to have solved the issue for me
Me too
I seem to have the same problem however I do not get an error message at all, I just see the application in the notification bar preparing to download except instead of even downloading it basically just disappears. I had this problem ever since installing Vegan tab 5.1.1.
I had the same problem...drove me crazy...finally figured out that you can just log intp the market on my laptop and install everything from there....

[Q] /system/app/Browser.apk has unexpected contents

Hi all! Please solve my issue - it is getting real serious. Before starting a thread I have already researched a lot about this problem and now, XDA is my second last hope!
I own a XOLO Q1010 (with Android 4.2.2) phone. Recently, the company has released KitKat update for this device. I was real excited about it as the new ROM has already arrived luckily to my phone as well! But, unfortunately, it is not that easy. I start upgrading by downloading the system update of 316.14 mb, and as soon as it enters Recovery mode, after few seconds, an error occurs. First, I thought there might be some problem with the Zip file, next, I downloaded update again and kept it at a safe place to reuse it.
Now, I don't know why but as I analyzed that error, it wrote:
warning:no file_contexts verifying current system
"/system/app/Browser.apk" has unexpected content,
installation aborted.
update.zip is not correct
I thought that once few months earlier, I disabled this browser app (after rooting) so that may be the issue. I'll update that browser and it will apply the update to my phone.
After this, I started troubleshooting.
I checked Browser.apk file, and saw that it was working fine.
After this, when I started Browser, it showed: "Unfortunately, the Browser has stopped".
I later reset the app preferences, but it didn't worked.
I decided to re-install the fresh version and paste it manually within /system/app folder.
I did as many times as possible and with trusted installers (like the one I got on some thread on XDA itself), but nothing really worked.
I decided to do clear the cache partition but that doesn't work either.
Right now, the browser is also not working and I cannot upgrade my system as well.
I have gone for Factory Reset as well. But as soon as setup completes and everything get backs to normal, I start the default browser, it pops-up the message again that unfortunately, the browser has..
So this is what bothering me a lot. I have already gone for a Factory reset and tried the methods that I was aware of and found suitable. But nothing actually worked. The Recovery still displays the same error as above and I cannot upgrade my OS to KitKat.
Tired and irritated now, please anyone help me.
Thanks in advance! :good:
I have the same issue.
I also deleted the system browser.apk.
_swarp said:
Hi all! Please solve my issue - it is getting real serious. Before starting a thread I have already researched a lot about this problem and now, XDA is my second last hope!
I own a XOLO Q1010 (with Android 4.2.2) phone. Recently, the company has released KitKat update for this device. I was real excited about it as the new ROM has already arrived luckily to my phone as well! But, unfortunately, it is not that easy. I start upgrading by downloading the system update of 316.14 mb, and as soon as it enters Recovery mode, after few seconds, an error occurs. First, I thought there might be some problem with the Zip file, next, I downloaded update again and kept it at a safe place to reuse it.
Now, I don't know why but as I analyzed that error, it wrote:
warning:no file_contexts verifying current system
"/system/app/Browser.apk" has unexpected content,
installation aborted.
update.zip is not correct
I thought that once few months earlier, I disabled this browser app (after rooting) so that may be the issue. I'll update that browser and it will apply the update to my phone.
After this, I started troubleshooting.
I checked Browser.apk file, and saw that it was working fine.
After this, when I started Browser, it showed: "Unfortunately, the Browser has stopped".
I later reset the app preferences, but it didn't worked.
I decided to re-install the fresh version and paste it manually within /system/app folder.
I did as many times as possible and with trusted installers (like the one I got on some thread on XDA itself), but nothing really worked.
I decided to do clear the cache partition but that doesn't work either.
Right now, the browser is also not working and I cannot upgrade my system as well.
I have gone for Factory Reset as well. But as soon as setup completes and everything get backs to normal, I start the default browser, it pops-up the message again that unfortunately, the browser has..
So this is what bothering me a lot. I have already gone for a Factory reset and tried the methods that I was aware of and found suitable. But nothing actually worked. The Recovery still displays the same error as above and I cannot upgrade my OS to KitKat.
Tired and irritated now, please anyone help me.
Thanks in advance! :good:
Click to expand...
Click to collapse
You need to flash stock 4.2.2 rom via spflashtools then update

Nook Tablet, 16 GB, AOSP Android 7.0

Followed all the steps in the detailed "[HOW-TO] Installing AOSP Android 7.0 "Nougat" Internally on the 16 GB Nook Tablet". During the process I was unable to install the suggested open_gapps-arm64-7.0. Tried several times, so right now I ended up with a mean and lean android system with 3 icons on the home screen. .
I'm a beginner doing this. So I attempted to copy superuser apk and the play store apk via usb connection to no avail. Don't even know where they ended up. I'm able to do a google search but it does not retain any bookmarks I'll be making, the reason being explained as I'll need an updated bookmark apk. (Which one??) and how do I install that?
Anyone out ther who can guide me in the right direction? Much appreciated. I do understand a little of the jargon being used in the forums here.
leenaud said:
Followed all the steps in the detailed "[HOW-TO] Installing AOSP Android 7.0 "Nougat" Internally on the 16 GB Nook Tablet". During the process I was unable to install the suggested open_gapps-arm64-7.0. Tried several times, so right now I ended up with a mean and lean android system with 3 icons on the home screen. .
I'm a beginner doing this. So I attempted to copy superuser apk and the play store apk via usb connection to no avail. Don't even know where they ended up. I'm able to do a google search but it does not retain any bookmarks I'll be making, the reason being explained as I'll need an updated bookmark apk. (Which one??) and how do I install that?
Anyone out ther who can guide me in the right direction? Much appreciated. I do understand a little of the jargon being used in the forums here.
Click to expand...
Click to collapse
I'm sorry to tell you that those are the wrong GApps for the hardware. I will update the original instructions. What you need are the arm GApps, not the arm64 (remember, this is OLD hardware). The filename of the zip I used is open_gapps-arm-7.0-pico-20170310.zip
At this point, having done some fooling with the system, it's best to start the entire process over. That will give you the most stable result. You cannot install the PlayStore and have it function without GApps, so just forget that part. The superuser file I mentioned is a must, once you get the PlayStore working.
The Bookmark provider apk is already on the device. Re-read the second post in the instructions. You just have to tap to install it, for some unknown reason.
Thank so much for your quick response. You were absolutely correct that I was installing the wrong gapps, so I started over again with the 7.0 stock (error message), the nano (same thing) and finally the pico and that one worked. By that time I hit the sack. I found that out shortly after I posted the message. I kept reading and reading the instructions and completely overlooked the GAPPS choices I had. Even a very cryptic error message popped up that said something about "incompatible" and "arm". Duhh. So what I'm going to do is wipe it clean again (3rd time) and reinstall everything so I can do it in my sleep.
Regards
leenaud said:
Thank so much for your quick response. You were absolutely correct that I was installing the wrong gapps, so I started over again with the 7.0 stock (error message), the nano (same thing) and finally the pico and that one worked. By that time I hit the sack. I found that out shortly after I posted the message. I kept reading and reading the instructions and completely overlooked the GAPPS choices I had. Even a very cryptic error message popped up that said something about "incompatible" and "arm". Duhh. So what I'm going to do is wipe it clean again (3rd time) and reinstall everything so I can do it in my sleep.
Regards
Click to expand...
Click to collapse
If you reformatted data as f2s, you might need to change it back to ext4 before you can do a successful wipe. Just a thought.
nmyshkin said:
If you reformatted data as f2s, you might need to change it back to ext4 before you can do a successful wipe. Just a thought.
Click to expand...
Click to collapse
I'm lost. All I did during the previous wipes, went into Advanced Wipes and cleaned out everything. Did.n't format. So are you saying I format first (ext4) and then do a complete wipe? The last time I booted it seemed to be very unstable. Looked like an invisible finger was touching the screen. Jumped all over the place.
leenaud said:
I'm lost. All I did during the previous wipes, went into Advanced Wipes and cleaned out everything. Did.n't format. So are you saying I format first (ext4) and then do a complete wipe? The last time I booted it seemed to be very unstable. Looked like an invisible finger was touching the screen. Jumped all over the place.
Click to expand...
Click to collapse
OK, I read your instructions again and think I know how to go about it. If all goe well during the installation ad it still seems unstable when booting I might ask for help again.
Thank you
leenaud said:
OK, I read your instructions again and think I know how to go about it. If all goe well during the installation ad it still seems unstable when booting I might ask for help again.
Thank you
Click to expand...
Click to collapse
Me again. Everyting installed without a problem. Was able to get a couple apk from google plastore. Having said that, I also installed ES filemanager thinking it would give me root access. (no go.) No option under the developers option either. So gave up on that. Also I noticed that depending what apk I loade, the response time was rather slow. Also for no reason at all it came randomy up with "shutting down" messages. And it seems to execute some stored touch screens as it was going all over the place. At this point I'm going to be looking for something else. Again thank you for your help
leenaud said:
Me again. Everyting installed without a problem. Was able to get a couple apk from google plastore. Having said that, I also installed ES filemanager thinking it would give me root access. (no go.) No option under the developers option either. So gave up on that. Also I noticed that depending what apk I loade, the response time was rather slow. Also for no reason at all it came randomy up with "shutting down" messages. And it seems to execute some stored touch screens as it was going all over the place. At this point I'm going to be looking for something else. Again thank you for your help
Click to expand...
Click to collapse
Sorry it didn't work out for you. It continues to perform very well for me. Seems like each piece of hardware has its own quirks.
Is this for the Nook 2016 or 2018 hardware versions, or does it work with both?
Goggles2114 said:
Is this for the Nook 2016 or 2018 hardware versions, or does it work with both?
Click to expand...
Click to collapse
Are you talking about the firmware upgrades for the original Nook Tablet or thinking about the various newer devices called by the same name?
This is for the OLD Nook Tablet BNTV250.

Categories

Resources