Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Bump bump, bump it up!
Do you use the original SE in-wall charger? If not, thats the problem, if yes I recomend to test with a different wall charger (eg. from another device)
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
It could possibly be your cable as mine broke a few weeks back (Same Problem), I just replaced the cable now its fine
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Maybe the connector in the phone is broken????
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
blade828 said:
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
Click to expand...
Click to collapse
Rockdale? 6 weeks?! Not going that far. :-/ I can live with just charging from the PC at the moment.
Thanks though Sad news indeed
Is is still under warranty? It will eventually stop charging from the PC too. I was waiting for parts to arrive so maybe they have them in stock now. That was 6 weeks from melbourne and back.
Going through the same thing in the US. I was told repair would be 5-7 days, but I'm sure I'm looking longer. If it comes back within the time frame they gave me I will be pleasantly surprised. I hope you're still under warranty and do your self the favor and send it in or soon you will have a very expensive paper weight. Good Luck!
I went through the exaxt same thing. It stopped charging from the wall but could only charge from computer but eventually stopped charging altogether.
Did you try taking out the battery and plugging in with the original se microusb cabe to the wall. After 5 min. put the battery in. First time didnt work for me but then i took out the battery again and put it back in immediately and then it turned on.
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Out of curiosity, how long before each of your X10's stopped charging altogether? :S
Because, for me, it's been longer than two months and throughout that time I've managed to keep charging it via the computer.
Thanks.
Mayazcherquoi said:
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Click to expand...
Click to collapse
I've 3 usb-to- chargers here:
From a MP20 phone, generic charger that can't charge my phone and also can't charge most of other devices, output power and voltage are low.
From an old Ipaq(not ipad) it does charge my x10 for some reason takes longer than the original, it says on it 1000mA and 5V, I don't remember the real amp and voltage on it.
And the original one, always charge really fast(2 hours for a full 0 to 100% when the phone is ON)
Conclusion, buy and original charger if you not using one, which seems to be the case.
OR, update your baseband if possible, as battery issues are normally related to baseband are normally the cause of this errors.
To make sure you can always try to do a SEUS repair.
Neo said:
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
Click to expand...
Click to collapse
Sorry to say this, but your are wrong man.
My charger says 5.0V which is exact the same voltage as any USB ports(exception for some internal USB ports used commonly for bluetooth and other low consumption devices that use 3.0 to 3.3V).
The difference is mainly on the amount of power amp it can supply, the original usb cable + wall charger provides 700mA, while in the PC USB 2.0 ports provide 500mA, 1.0 USB provide 100mA and 1.1 I don't remember now, generic usb wall chargers say sometimes they provide 500mA but they mostly provide 30l0mA and sometimes they do not provide on 5.0V they oscillate between 4.6 to 5.2V a good usb port have to provide 4.95V to 5.1V any difference from this may even burn a phone if higher and not charge or reduce a battery life if too lower.
Everytime a battery is not charged up the end of 100% they battery life gets a bit reduce as next time even if you leave it to charge up to 100% it won't really be at 100%, this can only be seen by measuring the battery voltage after the charge, fully charge it must reach up to 4.7V
on the battery or something like this.
Mayazcherquoi said:
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
Click to expand...
Click to collapse
If the cable is too thin(like 1.0 usb cables they can't handle 500mA if connected to an already extended usb port it may not get recognized and also not even charge.
Laptops usb ports may not allow 500mA it different for every laptop, some work, some doesn't and others your have to set that on bios.
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Always when connected to the PC it should say charging, if it did say discharging at some point then there was something wrong.
But charging on the pc is very slow and not good.
denenatse said:
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
Is there any other model of charger than a usb-to-wall? Sorry my lack of knowledge on this, but i never saw a wall direct charger for x10.
Thanks button is appreciated, rsrsrs
Related
Went to sleep last night with my Atrix plugged in as I normally have had all my phones, was playing with it right before I went to sleep and everything worked just fine, woke up this morning and the phone will not power on!
First tried to power it on unplugged and the green light flashed for 2 seconds, and nothing happened. Okay, weird, but I'll go with it. Plugged it in, and the green light stays on now until I press the power button! Once pressed, it flashes off, flashes on for 2 seconds and stays off. Nice. I thought the green light meant it was fully charged - when I woke up this morning, it had no green light on, but it was plugged in just fine all night - grabbed my Jawbone ERA and plugged it in to the charger I had the Atrix connected to and it started charging right away, so I know it works....
Pulled the battery, tried plugging it in and power it on without the battery. Nothing. Tried putting in the battery and plugging it in again to "jump start it" as I had done yesterday when I first got it - apparently you can't just charge the thing when connected to a laptop if the phone is off, it will power on even if you power it off again! Nothing.
What the hell happened in it's sleep? I KNOW rooting it didn't cause sleep death.... This thing doesn't have a custom ROM or any undervoltage adjustments, so why the hell is it acting up??? Damnit, right when I got EVERYTHING set up the way I wanted it too.... can't bring it in to the store and give it up with all my personal stuff on there now, I need this thing to power on to wipe it first!!! I'm leaving it connected to the laptop with the green light on for a while and will see what happens in an hour or so....
EDIT - just searched for and tried to hard reset the phone from this thread, the phone still won't even power on to get to the recovery screen!!!
UPDATE - see below and use the SUPPLIED Moto AC charger or at least one with over 5.0V - NOT a PC and NOT a USB hub!
use the charger that came with the phone. My old HTC ones won't charge the phone for some reason. I bet your battery is just dead.
Did you use the provided charger? I tried plugging my Atrix in to the charger I used for my N1, and found that it did not provide enough current. With the old charger, after the phone died, I had similar symptoms where the green light would flash but phone would not come on. Plugged it in with the Moto provided charger, and 5 minutes later all was good...
I had the same problem. Thought I was gonna have to take it back to the store. I don't know what the problem was but I took the battery out for 5 minutes. Then I plugged it into the wall charger(wouldn't work with PC). I didn't turn it on for 30 min, just left it on the charger. Then I hit the volume rocker and it showed the battery charging symbol which it didn't do before. And then I was able to power it on
Same thing here. I purposely drained my battery on the first use. Plugged the usb cable into the PC and nothing. Same blinking green light with no response. I also thought I'd have to return the phone. Then for S & Gs I plugged it into the wall charger and it came to life. Once I got the battery charged a little bit I plugged it into the PC and it started to charge again. Don't know why, but it worked.
Have been running around the house trying to find valid outlets, and that does indeed appear to be the problem. I found it out the hard way though, should have kept an eye on the thread - used a power outlet instead of a PC USB connection and the screen fired right up! Yes, the phone showed the battery with 0% in it, but at least the screen finally came on!
How I have my phone set up normally is connected to my charging valet on my dresser, connected with a 15 foot USB cable that plugs directly into my desktop. Since the extension is good for just one USB connection, I have that connected to a USB hub and then a MicroUSB cable connects my phone from there. The Captivate, and all the other phones I've ever used, not to mention my Zune and Jawbone ERA, all eat that up and have no issues since the USB hub is powered not by the computer (seven USB cables is just too many for a single PC connection) but by the power outlet in the charging valet. I wonder if the hub is distributing the power requirement for each device and the Atrix needs more than others.
I also figured out that the Moto charger has a 5.1V output on it, as does my Jawbone AC charger. Now I need to start making sure that my each one of my chargers in the cars I own has that same type amount of juice too! You go up 29% in battery capacity and so do the requirements to charge it, huh?
Thanks for all the help, marking this SOLVED....
I used the charger in my bedroom that I've used for the Captivate and others before it and it didn't provide enough juice to charge the Atrix. It quickly switched between charging and not charging. I still had 40% battery showing when I woke up though which was nice. It had been off of charge since 10am yesterday.
Plugged it into an HTC charger and it's fine. The one that didn't work is not a modular charger so the power cord is hard wired to the plug.
Alright, a quick update.... Got the phone charged to 100% while it was off and plugged into the AC outlet with the Moto charger. Put my SIM card back in it - couldn't be without a phone all day! - and fired up the Atrix. Went to Battery Info to see what the status is and while plugged into my USB hub, it says
Battery Status: Discharging
Power plug: USB
....
Battery Voltage: 4124 mV (or 4.124V)
Click to expand...
Click to collapse
What the hell? Then I went right after that and plugged it into the Moto AC charger, it says:
Battery Status: Full
Power plug: AC
....
Battery Voltage: 4207 mV (or 4.207V)
Click to expand...
Click to collapse
Why are POWERED USB hubs and PCs not strong enough to charge the phone? I tried ALL my outlets in my vehicles just now and they ALL show full battery status and plugged into AC! Who screwed this up????
GarciaM25 said:
Why are POWERED USB hubs and PCs not strong enough to charge the phone? I tried ALL my outlets in my vehicles just now and they ALL show full battery status and plugged into AC! Who screwed this up????
Click to expand...
Click to collapse
Did you download the PC Charging Drivers that Motorola requires you to have in order to charge via PC and USB cable? If not, look here.
Battleship said:
Did you download the PC Charging Drivers that Motorola requires you to have in order to charge via PC and USB cable? If not, look here.
Click to expand...
Click to collapse
Wait, you have to have specific drivers on the PC so that the phone will allow a power cable (let's not even worry about it being a USB cable for a second) to charge the phone properly? I have the Motorola Media Link software installed, and that has a ton of drivers on it, that wasn't enough? MORE drivers are required to charge a cell phone? This is madness!
Sorry about the necromancy, but had this problem myself but it is NOT due to a lack of voltage. Thought I'd actually solve this, the problem is CURRENT.
USB2 ports will only ever supply 500ma which simply isn't enough to charge the atrix when it's dead. USB2 powered hubs won't supply any more than this either to meet the USB2 spec. The fact that the AC adapter works is because they tend to have a higher output current in the region of 1-2 amps (you may notice the phone, or any other device for that matter, charges faster with AC adapters for this reason).
On a similar note, cheap car chargers only output 500ma. I know with my desire I can have it plugged in and it charges, but if I use GPS it actually draws more current than it can charge at resulting in the battery draining (albeit, slowly).
So, make sure you have a higher current AC/Car charger, or alternatively, plug it into a USB3 port to charge as USB3 spec allows 900ma (some mobos output up to 1A) which is enough to charge the Atrix.
Stewge said:
Sorry about the necromancy, but had this problem myself but it is NOT due to a lack of voltage. Thought I'd actually solve this, the problem is CURRENT.
Click to expand...
Click to collapse
Hey, no problem, if there's something I misstated, then please, correct it!
Stewge said:
So, make sure you have a higher current AC/Car charger, or alternatively, plug it into a USB3 port to charge as USB3 spec allows 900ma (some mobos output up to 1A) which is enough to charge the Atrix.
Click to expand...
Click to collapse
Not sure about this..... It's been about a year since I got all my USB3.0 gear, and I was super excited about it because I thought that my phone would charge ridiculously fast because of the added output, but I remember reading that 3.0 uses extra pins and those pins account for the added voltage and bandwidth of the cable - we don't have those extra pins when you step down from 3.0 to 2.0, so we lose the ability to charge devices faster as a result. I don't know if I actually proved that theory, but after I read up enough on it, I thought I just didn't have to with that knowledge..... again, correct me if I'm wrong, I've got a lot of 3.0 gear here!!!
GarciaM25 said:
Not sure about this..... It's been about a year since I got all my USB3.0 gear, and I was super excited about it because I thought that my phone would charge ridiculously fast because of the added output, but I remember reading that 3.0 uses extra pins and those pins account for the added voltage and bandwidth of the cable - we don't have those extra pins when you step down from 3.0 to 2.0, so we lose the ability to charge devices faster as a result. I don't know if I actually proved that theory, but after I read up enough on it, I thought I just didn't have to with that knowledge..... again, correct me if I'm wrong, I've got a lot of 3.0 gear here!!!
Click to expand...
Click to collapse
There are indeed extra pins in the USB3 standard but these are to transmit data only. The original USB2 data pins are only there for legacy support and USB3 transmissions use the extra lines. There's still only the 1 VBUS pin which supplies the +5V power. There's also no harm in offering higher current on the connection as a device will only ever draw as much current as it needs until it tops out the supplier, not the other way round
EDIT: Another solution could be to use a splitter cable (common with 2.5" drives)so you can draw from 2 ports, but with a micro connector. I've never actually seen one with USB micro but a quick look on ebay says they do exist
nsaia said:
Same thing here. I purposely drained my battery on the first use. Plugged the usb cable into the PC and nothing. Same blinking green light with no response. I also thought I'd have to return the phone. Then for S & Gs I plugged it into the wall charger and it came to life. Once I got the battery charged a little bit I plugged it into the PC and it started to charge again. Don't know why, but it worked.
Click to expand...
Click to collapse
Hi, can I know that when you plug it into the wall charger, is there any light on? Mine has no light on when plug to wall charger. But I can get the light green when plug into PC USB. Can you share that?
cscmf99 said:
Hi, can I know that when you plug it into the wall charger, is there any light on? Mine has no light on when plug to wall charger. But I can get the light green when plug into PC USB. Can you share that?
Click to expand...
Click to collapse
This is the exact same issue that I am facing now. Did you ever manage to find a solution for this problem?
atrix 4g not coming on
Is there any real fix to this issue i have search high and low and all i am seeing people talking about the battery id dead ... i have two battery that is fully charger and the phone still not coming up.
Hi all, sorry that im posting after two years ago but i am facing exactly the same problem, but i plugged it in my USB port, wich i think its a usb2, and i got the screen on but the cellphone did not say charging instead of that was connect your charger, and it was lower than 3% then it turned off. What can it be a solution??
None of the avobe solutions worked?
Which rom/kernel are you using?
I too have this same issue. My Atrix won't come on. I have 2 of the same phone. I tried the charger and cable from both phones. Neither work. When I first plug it it, the green light comes on for a few seconds then it goes out. I even opened the phone and removed the battery. Used a voltage tested and found my battery has 3.7 volts. Thats almost 100% charge. So it not a problem of power. I plugged the phone to my computer and same green light for a few seconds then gone. Won't do anything. No battery display or anything. I even did the simulated battery removal procedure. Didn't work. Is there anything else I can try? Can't get to recovery mode without display unless someone has a fix for that?
FWIW, I think I may have traced my recent charging problems to a Belkin USB charger at my office. On this power source, the battery indicates charging from USB, and apparently there's not enough current to keep up with the demand of the device. It discharges continuously with the screen on, and only keeps even with the screen off. The only way to charge with the Belkin is to turn the phone off.
With the included HTC adapter at my home, however (and with a Motorola adapter left over from a previous phone), the Rezound will charge with screen off, and perhaps even a little with the screen on. Allowed to charge overnight, I do not have to turn the device off when using the HTC charger. On this charger, the phone indicates AC power.
Of course, none of this was an issue before I took the ICS leak. Even though I've gone back to GB, I still have the ICS firmware, and I suspect something different in there is affecting charging.
In fact, I wouldn't be surprised if HTC simply lowered charging rates as part of a campaign to deal with widespread heat issues. If you were trying to cool the phone, that's definitely something you would consider tweaking.
For sure, it's a known issue, some chargers give the full 1A ( the phone indicates AC charging) and some only give 400ma or less (USB Charging).
Search around for chargers and there's good discussion on AC adapters that work well, and even how to modify a USB wall/car charger to give a full AC amount.
Both my gigabyte and msi motherboards are able to deliver up to 1.5A via the USB ports, and are even able to charge my phone (or tablet) when the computer is OFF.
a.mcdear said:
Both my gigabyte and msi motherboards are able to deliver up to 1.5A via the USB ports, and are even able to charge my phone (or tablet) when the computer is OFF.
Click to expand...
Click to collapse
for sure, but i bet your phone is only commanding 500ma from it since the phone is usb 2.0 spec... I too have a power port on my laptop to charge things when the laptop is off but it doesn't get over usb 2.0 spec because of the phone :x
I've tried everything, short of trying to make, or looking for, customized drivers to overload it.
thatsricci said:
for sure, but i bet your phone is only commanding 500ma from it since the phone is usb 2.0 spec... I too have a power port on my laptop to charge things when the laptop is off but it doesn't get over usb 2.0 spec because of the phone :x
I've tried everything, short of trying to make, or looking for, customized drivers to overload it.
Click to expand...
Click to collapse
You might be right when it comes to the Rezound, but I know for a fact that it is capable of supplying more than 500mA to some devices for charging. It charges my TF101 even with the screen on, which every other computer with ordinary USB ports seems incapable of doing. If I plug my TF101 into any other computer with a standard USB 2.0 port, it will still slowly discharge if the screen is on and I'm using it.
Either way, I notice absolutely no difference between charging via USB on my computer or via the actual charger, so I'm relatively sure the USB port IS outputting at least the full 1A that the actual charger is rated at, and I am NOT using a kernel with the "fast charge" mod..
I haven't really spent much time noticing how slowly the Rezound would charge on a regular USB 2.0 port. Maybe I'll give it a shot on my laptop tonight just to test it out.
Or, a simple ammeter would probably put the issue to rest definitely.. I wonder if I know anybody with one I could use.....
a.mcdear said:
You might be right when it comes to the Rezound, but I know for a fact that it is capable of supplying more than 500mA to some devices for charging. It charges my TF101 even with the screen on, which every other computer with ordinary USB ports seems incapable of doing. If I plug my TF101 into any other computer with a standard USB 2.0 port, it will still slowly discharge if the screen is on and I'm using it.
Either way, I notice absolutely no difference between charging via USB on my computer or via the actual charger, so I'm relatively sure the USB port IS outputting at least the full 1A that the actual charger is rated at, and I am NOT using a kernel with the "fast charge" mod..
I haven't really spent much time noticing how slowly the Rezound would charge on a regular USB 2.0 port. Maybe I'll give it a shot on my laptop tonight just to test it out.
Or, a simple ammeter would probably put the issue to rest definitely.. I wonder if I know anybody with one I could use.....
Click to expand...
Click to collapse
Or you could use a battery charging app to verify what rate it is charging at.
Sent from my ADR6425LVW using XDA
nosympathy said:
Or you could use a battery charging app to verify what rate it is charging at.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Which app do you use?
thatsricci said:
for sure, but i bet your phone is only commanding 500ma from it since the phone is usb 2.0 spec... I too have a power port on my laptop to charge things when the laptop is off but it doesn't get over usb 2.0 spec because of the phone :x
I've tried everything, short of trying to make, or looking for, customized drivers to overload it.
Click to expand...
Click to collapse
Use a charging only cable, i.e. Naztech Micro USB Charging Cable (sorry, don't remember who initially pointed to this), and the phone will see the source as an outlet and not a usb port.
plcline said:
Use a charging only cable, i.e. Naztech Micro USB Charging Cable (sorry, don't remember who initially pointed to this), and the phone will see the source as an outlet and not a usb port.
Click to expand...
Click to collapse
Well that makes sense, any USB cord without data points can only provide power and therefore the phone wouldn't be able to determine whether its a computers USB port or a charger. When the data pins are present, the phone must request a high-power mode from the computer in order to obtain the full 500mA on standard ports, or 1.5A in the case of some newer boards as I mentioned earlier.
here's a weird one..
when using the wall charger that came w/ my phone, instead of charging the battery its actually draining it, the battery icon says its charging/plugged w/ power but after leaving it plugged in eventually it died out, but if i plug it in my pc it charges w/ no problem..
pls help me or enlighten me as to whats happening...
thanks in advance.
Strange. It should be the other way around. USB 2.0 sockets push 500mah which isnt enough to charge the S while the wall chargers provided are 800/850. Perhaps a dud socket? Try another and if not your charger is fúcked.
yeah, i think its my effin charger, i plugged it in a diff outlet still same, i tried using it to charge my iphone its not working as well. thanks for the help.
Scratchling said:
Strange. It should be the other way around. USB 2.0 sockets push 500mah which isnt enough to charge the S while the wall chargers provided are 800/850. Perhaps a dud socket? Try another and if not your charger is fúcked.
Click to expand...
Click to collapse
USB isnt enough to charge the SXS?
Stop spouting rubbish like that.
I charge my SXS with my PC's USB port all the time and it charges just fine.
Seansmit17 said:
USB isnt enough to charge the SXS?
Stop spouting rubbish like that.
I charge my SXS with my PC's USB port all the time and it charges just fine.
Click to expand...
Click to collapse
For me it discharges faster than it charges. It may charge off yours but typically it'll be very slow or not at all. Some ports push more AFAIK, but the standard is 500max.
I also noticed that, if I have WiFi on, the phone actually discharges when connected to the PC (when used anyway).
I don't know how much current is provided though, never measured it.
If charging through USB is fine then it might be that the charger is shorting the battery + and - through some resistance.
Try another charger and see if it helps , and replace the faulty one. You don't want to break your battery.
On my laptop usb port it will charge just fine. Slower than the normal charger but it does work.
On my desktop pc otoh it drains more than it charges. So there probably is a difference in output on the usb ports.
Sent from my HTC Wildfire S A510e using XDA
RiotRick said:
On my laptop usb port it will charge just fine. Slower than the normal charger but it does work.
On my desktop pc otoh it drains more than it charges. So there probably is a difference in output on the usb ports.
Sent from my HTC Wildfire S A510e using XDA
Click to expand...
Click to collapse
If you were using "front ports" these are often underpowered compared to ones mounted on the mobo(back of case, or all laptop ones).
I connect my phone via my front ports and it charged just fine actually...
I am behind the computer quite a bit and my phone keeps its battery and charges when attached, even when I'm installing a bunch of apps (I tend to browse the market via my browser and pick up apps as i go) I still don't discharge...
It could be a voltage issue with your ports, but with my frontal ports I notice no problems...but anyways, this isn't about the ports, this is about the OP's charger.
To me, it seems like your charger is faulty.
Hi,
I wrote about a similar issue I was having with the phone discharging when connected to USB.
http://forum.xda-developers.com/showthread.php?t=1573336
From what I could tell in my tests that I did the issue is when the phone is connected to the PC and THEN the PC goes into Standby mode. Even on a powered USB hub the phone charging mechanism does not reset correctly and continue charging but begins discharging.
I would have loved if someone else could have tried to reproduce what I wrote in that thread but no one responded. For me the only solution is to charge directly with the AC power and not through the USB as my PC goes in and out of standby regularly.
Phone charghed with USB will drain batery faster then phone charged with wall charghed.
It was thread in xperia arc about that, the test bring that conlcution.
So i recomend to charge with wall for better batery efecienty.
Sry for language im little sleepy. :$
Sent from my LT26i using XDA
Does anyone know if there is an official 2m USB cable available in the UK? I bought a generic one off eBay, but it charges the phone extremely slowly....
I use the 2m cable that came with my kindle 3 and it works as well as the original one
Sent from my LT26i using XDA
Are you charging the phone from a USB port? If so, it's the limitation of the port, not the cable. Try with a proper charger an it should charge at a more sensible pace.
Dealextreme dot com
Sent from my LT26i using XDA
Charging speed doesn't depend on the cable but on the charger it is used with.
anthon said:
I use the 2m cable that came with my kindle 3 and it works as well as the original one
Click to expand...
Click to collapse
I'm afraid it doesn't work as well for me. I got a Kindle 3 cable, and while it does charge the phone (using the charger which came with the phone), it does it very slowly. So slowly that if I try to use the phone even for basic tasks whilst charging with it the battery still keeps heading south.
If I use the stupidly short cable that came with the phone it charges nice and quick, but every other cable I have used so far either doesn't charge or does so very slowly.
Any ideas as to why this would be?
On a related note, this sounds good, but again the cable looks stupidly short:
http://www.sonymobile.com/gb/products/accessories/quick-charger-ep851/
What are you using to charge your phone? An EP-800 or something else? I have a cheap 1500ma charger that seems to take ages to charge my Xperia. The cause was that for a full speed charge, pins 2 and 3 must be bridged. I dismantled the charger and put a tiny blob of solder on the usb port pins. It now charges like a demon.
Same story with my car charger. Before the mod I could actually lose charge when using satnav and streaming music over bluetooth.
I have a battery widget that says whether I am on AC charging or USB charging. Its name eludes me.
Oh, and a safer alternative may be to sacrifice a USB cable and bridge the pins on that.
Better than all those though is the official Blackberry Playbook charger. 2A and a long cable. Charges the phone like nothing else.
Yep, am using an EP-800.
Fortunately the latest cable I ordered works a treat, so I can happily recommend this one:
http://www.amazon.co.uk/gp/product/B007OWH65Y/ref=oh_details_o00_s00_i00
Rabangus said:
I'm afraid it doesn't work as well for me. I got a Kindle 3 cable, and while it does charge the phone (using the charger which came with the phone), it does it very slowly. So slowly that if I try to use the phone even for basic tasks whilst charging with it the battery still keeps heading south.
If I use the stupidly short cable that came with the phone it charges nice and quick, but every other cable I have used so far either doesn't charge or does so very slowly.
Any ideas as to why this would be?
On a related note, this sounds good, but again the cable looks stupidly short:
http://www.sonymobile.com/gb/products/accessories/quick-charger-ep851/
Click to expand...
Click to collapse
Double the length, double the resistance of the wire. Assuming the have the same cross-sectional area.
The phone holds its battery well under regular use, however when I connect it to the charger, the phone takes long to charge. I have to turn off the phone and let it charge over night so that the battery charges from 30% to 80%. Again under regular usage, the phone does hold the battery well its just the charging that is ridiculously slow. I have wiped the phone and cleared the cache and still find it to charge slowly.
Is this a battery issue or a bad connection?
Are you using the oem charger?
Is it connected to the wall, or a pc?
Charging from a pc causes it to "trickle charge" which using a non oem charger will cause the data pins are active, you'll need to hack the cable and short the middle data pins to get it to fast charge like an oem charger.
studacris said:
Are you using the oem charger?
Is it connected to the wall, or a pc?
Charging from a pc causes it to "trickle charge" which using a non oem charger will cause the data pins are active, you'll need to hack the cable and short the middle data pins to get it to fast charge like an oem charger.
Click to expand...
Click to collapse
Using the OEM charger, and connected to both wall and PC results in the same slow charge. When connected to my PC this morning, it kept making the sound as if connecting and disconnecting every second even though it remained plugged in.
Ah that sounds like a bad cable then.
Or, worse case scenario, a bad usb port on your phone.
studacris said:
Ah that sounds like a bad cable then.
Or, worse case scenario, a bad usb port on your phone.
Click to expand...
Click to collapse
+1111111
definitely a ****ty USB cable
I had that happen to me. I found out it was a bad USB cable after swapping out the cable with another one. Try swapping both the cable and the charger to see what changes your charge time the most and you'll have your culprit.
I have exaclty same symptoms, tried different cables and chargers but no luck. Any clue?
ahnaguib said:
I have exaclty same symptoms, tried different cables and chargers but no luck. Any clue?
Click to expand...
Click to collapse
yes....
buy a "new" samsung cable and charger for the galaxy note....nothing else....
and charge from the wall, not PC.....g