The texture back feels nice. But it does start slipping around on me after a while. Imagine someone must be working on a gel, TPU, or some shell case for this tablet. Anyone see anything yet?
I am looking and waiting for transformer case which is similar to this case...
http://www.amazon.com/gp/product/B0...17145&creative=399349&creativeASIN=B004XRSLB6
Saw it on a xoom today at work and it looked and felt good.
Kinda hoping for something along the likes of Motorola Xoom's gel case..
http://www.amazon.com/Motorola-Protective-MOTOROLA-Retail-Packaging/dp/B004M8RWB6/
Not a full case, just something that covers the back and edges and makes it a bit easier and comfortable to hold.
Ravynmagi said:
Kinda hoping for something along the likes of Motorola Xoom's gel case..
http://www.amazon.com/Motorola-Protective-MOTOROLA-Retail-Packaging/dp/B004M8RWB6/
Not a full case, just something that covers the back and edges and makes it a bit easier and comfortable to hold.
Click to expand...
Click to collapse
I hope they release one also. I had to use painters tape to tape the edges so I don't get tiny paper like cuts when holding the TF101.
Anyone found a shell type case yet?
Related
I can't seem to find what I'm looking for...
I keep looking but for some reason i can't find one I like.
I want a hard shell but adds minimal bulk.
I want it to protect the corners and have a lip on the face so i can lay the phone face down.
To get picky I want a matte finish and preferably blue. I don't like the glossy look or feel or the silicon, rubbery look or feel. I also just want a solid color and nothing fancy or swirly
I got the elago case and like the look but it doesn't protect the ends or one corner and has no lip.
What I really want is a Seido Surface like I had for my Tbolt
http://www.seidioonline.com/htc-thunderbolt-surface-case-sapphire-blue-p/csr3htmec-bl.htm
That was perfect.
So....have I missed one like this?
schrochem said:
I can't seem to find what I'm looking for...
I keep looking but for some reason i can't find one I like.
I want a hard shell but adds minimal bulk.
I want it to protect the corners and have a lip on the face so i can lay the phone face down.
To get picky I want a matte finish and preferably blue. I don't like the glossy look or feel or the silicon, rubbery look or feel. I also just want a solid color and nothing fancy or swirly
I got the elago case and like the look but it doesn't protect the ends or one corner and has no lip.
What I really want is a Seido Surface like I had for my Tbolt
http://www.seidioonline.com/htc-thunderbolt-surface-case-sapphire-blue-p/csr3htmec-bl.htm
That was perfect.
So....have I missed one like this?
Click to expand...
Click to collapse
Yes you have. Check out this thread and seidio case is on there
I just wanted to share a great case with everyone. I had one for my 3D and loved it. They put me on a mailing list to be notified when they made one for the EVO 4G LTE and I finally got the email Wednesday. This morning I got the case and I love it! It covers buttons, has a great finish and feel, and is comparable (but slightly sturdier) that the TPU cases.
http://www.incipio.com/HTC-EVO-4G-L...EVO-4G-LTE-NGP-Semi-Rigid-Soft-Shell-Case.asp
daleybox said:
I just wanted to share a great case with everyone. I had one for my 3D and loved it. They put me on a mailing list to be notified when they made one for the EVO 4G LTE and I finally got the email Wednesday. This morning I got the case and I love it! It covers buttons, has a great finish and feel, and is comparable (but slightly sturdier) that the TPU cases.
]
Click to expand...
Click to collapse
How would you say the texture is on it? I have small hands so a little bit of grit helps me hold onto the thing, but I don't like the super sticky feel that makes it impossible to get out of your pocket
I have a barely there feather one for my ns4g and like it but this looks much better with corner protection.
Hopefully they make a white one for us too.
Sent from my EVO
So is this like a TPU case or is it between a TPU and hard plastic? It looks interesting but I wonder how much protection it really gives.
ristrettodreams said:
How would you say the texture is on it? I have small hands so a little bit of grit helps me hold onto the thing, but I don't like the super sticky feel that makes it impossible to get out of your pocket
Click to expand...
Click to collapse
I think it would be perfect, it is not stickey/rubbery but it gives just a little added grip. It adds just enough bulk to feel solid without any real added weight. It slides in and out of pockets easily as it doesn't 't have many openings to catch on anything.
Toast95135 said:
So is this like a TPU case or is it between a TPU and hard plastic? It looks interesting but I wonder how much protection it really gives.
Click to expand...
Click to collapse
It's more like a stiffer TPU case. It's not as flimsly/rubbery as the TPU case, but basically the same form factor, weight, etc. with a little more sturdy feel. It's not going to give much more protection than a TPU case, but it will give a little more because it is more rigid. I think one of the main advantage over the Diztronic TPU cases is that it covers all the buttons and eliminates those flexible areas that make it hard to hit the buttons.
I have dropped my 3D in the 3D version of the case from 3 to 4 feet onto concrete numerous times and there were no scratches or visible damage to the phone. It also provides that slight lip around the screen so it doesn't touch if laid flat.
Have you noticed any issues with pressing the buttons? That seems like the main criticism about this case. I'm really liking this one, TPU seems too flimsy and I rarely ever drop my phone (I dropped my Epic maybe 3 times) so I don't need something bulky.
I dented my Evo today so I'm on the hunt lol.
daleybox said:
It's more like a stiffer TPU case. It's not as flimsly/rubbery as the TPU case, but basically the same form factor, weight, etc. with a little more sturdy feel. It's not going to give much more protection than a TPU case, but it will give a little more because it is more rigid. I think one of the main advantage over the Diztronic TPU cases is that it covers all the buttons and eliminates those flexible areas that make it hard to hit the buttons.
I have dropped my 3D in the 3D version of the case from 3 to 4 feet onto concrete numerous times and there were no scratches or visible damage to the phone. It also provides that slight lip around the screen so it doesn't touch if laid flat.
Click to expand...
Click to collapse
In terms of thickness and adding bulk, how does it compare to the Diztronic TPU cases?
clankfu said:
In terms of thickness and adding bulk, how does it compare to the Diztronic TPU cases?
Click to expand...
Click to collapse
I went back and forth for about 20 minutes between the black and translucent mercury, but ended up buying black. Something tells me if I like it I will end up with the other at some point haha. I love the Diztronic cases but like the buttons covered, so this sounds perfect. Will be a good change of pace from the Otterbox Commuter from time to time.
What color did you get? Any pictures of your own?
daleybox said:
I think it would be perfect, it is not stickey/rubbery but it gives just a little added grip. It adds just enough bulk to feel solid without any real added weight. It slides in and out of pockets easily as it doesn't 't have many openings to catch on anything.
Click to expand...
Click to collapse
Sounds awesome, I'll pick it up. I have the bodyglove case currently and it's already cracked on me just from normal usage, no drops.
Toast95135 said:
Have you noticed any issues with pressing the buttons? That seems like the main criticism about this case. I'm really liking this one, TPU seems too flimsy and I rarely ever drop my phone (I dropped my Epic maybe 3 times) so I don't need something bulky.
I dented my Evo today so I'm on the hunt lol.
Click to expand...
Click to collapse
It was different coming from the open TPU so it took a little getting used to, but I like it much better. It's not hard once you use it for a day or so.
Just ordered the translucent mercury version. Coming from the the blue silicone case that Sprint sent out to the preorderee's. Getting a little tired of how much it sticks to the inside of my pocket, so hopefully this will be an improvement in that regard. Will let you guys know how it is once I receive it!
By the way, entering the promo code SUM2012 at checkout will save you $4.00 on the case. It's good until the 20th of August. Just sharing!
Also love this case had it with my epic touch and iPhone just ordered it for my new evo !!
Is the material like the casemate barely there? Does the camera have a elevated lip to protect the camera ?
Sent from my EVO using Tapatalk 2
skwon said:
Is the material like the casemate barely there? Does the camera have a elevated lip to protect the camera ?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I just ordered one, but from what I've read it's similar to the diztronic tpu case but the material is a little thicker.
Mine shipped
Mine "partially shipped" this morning, I dunno what that means but okay. Maybe I'll get a the packaging but no case lol
is this case just a tpu material? Does the back protect the camera frame from getting scratched if put down on surface?
In case anyone cares they just released their Feather case. I literally just ordered the NGP yesterday and may order one of these as well. The blue looks nice as I've grown accustomed to the color of the Silicone Case Sprint sent to pre-orders.
http://www.incipio.com/HTC-EVO-4G-LTE-Cases/HTC-EVO-4G-LTE-Cases.asp
If anyone has the Diztronic TPU case, I would say these are almost identical in size. I really couldnt see any difference. It feels the same in hand, but covers the buttons, and is much more rigid.
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
I agree that the phone is slippery ... and I started by using a gel case ... which worked, and it had knobby grips on the edges of the case -- and that worked very well to stop dropping the phone (I did that several times before I put the case on it).
Then I tried a phone with the Nokia CC-1043 case ... but that also was too slippery for me. I tried some egrip (they are non sticky things that will "stick" to most any surface ... and if you want something on the back of the phone -- there are pads that are 1" by 2" (about) that would work. However, for me, I wanted something on the edges -- so that I could get it out on the vertical holster that I use. The egrips on the edges did not stay formed along the curve of the case ... so I modified the CC-1043 with some grooves on the edges -- which really works great!
I was going to post some pictures, but I don't have access to a web site for the insertion ... If you send me a private message, I can send you the pictures ...
The grooves were made using a bandsaw with a block of wood taking the place of the phone to provide stability to the case as it was cut ... and there was a block of wood to stop how far into the blade that the case would go, and resulted in a cut that is about 1/2 mm deep ... it provides enough grip to grab the phone out of the case and while holding it -- most of what my hand / fingers are touching are the edges of the phone ...
It depends on which color you have. The blue and red are not as slippery. But I have Ghost armor on mine and it gives it a slightly tacky feel in addition to protecting it from scratches. Mine is red.
I have the black one (matte finish).
Is this the egrips you mentioned? http://www.egrips.com/
It sounds like that might be too much grip. I don't want to have trouble getting the phone into/out of my pocket. I just want more grip so that I don't constantly feel like it's going to fly out of my hand.
I looked at the case you mentioned here and it sounds good: http://www.amazon.com/Nokia-02733P4-CC-1043-Cover-Lumia/dp/B009T8YXCA but having some texture built-in would be nice (as opposed to your DIY grooves).
So I looked at related products and found the following:
http://www.amazon.com/Worldshopping-Black-Matte-Quicksand-Accessories/dp/B00A1Z3U3S/ref=pd_sim_cps_7
http://www.amazon.com/JKase-Premium-Quality-Nokia-Streamline/dp/B00A1UPHYS/ref=pd_sim_cps_17 (the sides of this seem ideal)
http://www.amazon.com/Fosmon-Series-Protective-Nokia-Lumia/dp/B009YLCFZY/ref=pd_sim_cps_3 (don't like the color)
http://www.amazon.com/NOKIA-LUMIA-HYBRID-RUBBERISED-COVER/dp/B009YB0P5G/ref=sr_1_1 (mentioned by a reviewer above)
Can anyone speak for those cases? Probably going to make a decision between those 5 in a day or so.
I had a case like the JKase ... and it is OK, but it adds some noticeable weight to the phone ... it is the one with knobby sides ... it has a very thin strip along the front-bottom of the case that is along the micro USB connector and the speakers ... it never was straight, but it also didn't seem to provide much function ... read other posts that said that they cut it off ...
Don't know about the other cases ...
The egrips link that you have are the ones that I tried ... I always use a case and never just in the pocket -- so I don't know if it would cause a problem ...
Like I said, I like the Nokia case after the modification ... before it, it was still at risk of being dropped ...
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
The cc-1043 cases is matte see my ebay sale!
Electrical tape to a thin plastic case.
Simple, thin, and adds a lot of grip. However, it can cause issues if you work in a very hot environment as the tape will goop and slip. Otherwise, I do this with almost all of my devices.
Add texture to slippery cell phone
To make your phone less slippery, you can add textured stickers to it. The kind that you would put on the bottom of the bathtub to prevent slips.
I bought some good ones at Bed, Bath, and Beyond. You can cut them into any shape you want. They were actually shaped like fish. I cut them into strips and put a few on the back of the phone and on the sides.
You can find them in many colors.
Amazon has a good selection.
Surprised nobody has mentioned Ghost Armor. It's perfect for what you want.
I bought their MatteArmor for the back of my Samsung Galaxy tablet and to provide a matte finish instead of it's slippery plastic.
Increased holdability (made up word lol) and maintains the look of the device because it's transparent and thin.
It's that good I paid to have it shipped from the USA to UK. Lifetime warranty, 30 day money-back guarantee
Here's a link to the Lumia range but they do literally any device.
Just bought silicone case from dx.com. Transparent, back side is matted. Not bad for this price, but flash working incorrect - fills all the frame because case scatters light
I'm a a sailing captain and watch people dropping their phones all the time, breaking glass and going overboard. I looked for a solution and couldn't find on that fit the bill as being easy to use, no installation, fits most phones and cases, so I invented one for me. People wanted one, so I patented it and just started production. Just search CellGrasp in google. You'll find me. Drop me a note and you can check it out at the site. Dropping cell phones is a real and growing problem. CellGrasp is a device that is a solution to the problem. Simple, easy, secure, better pics and vids instantly. Just for your information...
Anyone find any good tpu cases?
I found a couple on Amazon but most with bad reviews. Most complaints were that the cases do not fit.
I found this one.
http://www.amazon.com/dp/B00I86GGII/ref=cm_sw_r_udp_awd_22zhtb0CC8DKH
It has no reviews yet and I bought it ...I don't have it yet... But let's hope it's good.
I have this one. It fits. It's snug, but it fits. The buttons are pretty hard to press though. It will do until some other options come out I guess!
If I could have any case for this device, I would want a Gumdrop Bounce Skin.
My wife has one for her Ipad air with a glass screen protector and there is nothing like it. Survives drops and a 5 year old, feels great to touch, sticks to your hand so you can use if one handed without a strap, sticks enough to a table or whatever so you can just lean it up against anything (wall, pillow, monitor, shelf, pencil holder, ...) and it stays at the same angle you set it down at, easy.
I just love this thing. If gumdrop doesn't make it, I'm going to have to bribe a silicone guy and get him to copy one for me. I think I could almost duplicate it with RTV silicone rubber if I bought two of them cut them up to fit and then did a two part mold, but it would take a bit of thinking and I don't know how well RTV silicone would last (but it would have the right shore A hardness to feel great and "stick" in all the right ways).
The best thing about the case is that while it grabs lint and stuff like most silicone cases, it does not feel bad and does not inhibit its stickiness. This might not make sense to you if you aren't acutely aware of everything you touch and how it feels (and I wish I didn't), but if you are sensitive to it, this is amazing. Now I haven't covered it in baby powder or anything, but it is amazing not having to worry about tossing it on a pile of laundry or the bed or the carpet and it not getting so covered in tiny dust that you feel like you have to wask it off. Even my otterbox for my GS4 makes me feel like that sometimes, but not my wife's gumdrop bounce, man I'm envious of that skin.
If you want here is the link to it on amz. for the ipad. they even have it in like 7 colors, I just wish they made it for the Note pro.., maybe they will.
http://www.amazon.com/Gumdrop-Cases-Bounce-Skin-BOUNCE-IPAD5-LTBLU-V3/
I got my Poetic Graph Grip yesterday. I'm pretty torn about it. The fit is great, it is much better protection than the Fosmon case linked above that I have, it is comfortable to hold BUT... it is heavy!! It adds a significant amount of weight to an already large tablet. And it also seems to be a bit of a dog fur/dust magnet. Which is a problem in a house with three dogs! So I'm not sure whether I will continue to use it or not.
OK I got the tpu case.... And it's pretty good. The buttons are a little hard to press especially the power button.... Other than that it's not bad.
Sent from my SM-P900 using Tapatalk
Just got this case and am really liking.
Much thinner and lighter than I expected. Much lighter than book cover.
Like the pen holder
Good grippingin on 2 sides. Kinda loose when gripping on edges with pen or camera cut out.
Super easy on off. Perfect fit of all ports and speakers
Only realcomplaint is no kickstand
https://www.amazon.com/Poetic-TurtleSkin-Protection-Protective-Silicone/dp/B07G5MZCFB
Hi. I also ordered from Poetic, waiting for delivery. I have a question : The navigation bar is easy to access ?
crissx said:
Hi. I also ordered from Poetic, waiting for delivery. I have a question : The navigation bar is easy to access ?
Click to expand...
Click to collapse
The case gets in the way a little but still useable
I just got this same case. This is a bit of an issue for me:
Good grippingin on 2 sides. Kinda loose when gripping on edges with pen or camera cut out.
Click to expand...
Click to collapse
Actually, for me it's bad on 3 sides, top, bottom, and s-pen side, but i don't grab by the top or bottom too much. Kinda feels like it could fall out of the case, and the side with the S-pen, just feels like a handle that I intuitively try to grab, especially because it doesn't have a kickstand, I wanna grab it on one side.
mistermojorizin said:
I just got this same case. This is a bit of an issue for me:
Actually, for me it's bad on 3 sides, top, bottom, and s-pen side, but i don't grab by the top or bottom too much. Kinda feels like it could fall out of the case, and the side with the S-pen, just feels like a handle that I intuitively try to grab, especially because it doesn't have a kickstand, I wanna grab it on one side.
Click to expand...
Click to collapse
Agree on spen edge and cutout side, but no issues with other edges. I'm really liking this case and haven't switched back to the book cover even once yet.
gottahavit said:
Agree on spen edge and cutout side, but no issues with other edges. I'm really liking this case and haven't switched back to the book cover even once yet.
Click to expand...
Click to collapse
I have gotten more used to it. I will probably keep this case on until a more rugged case comes out, preferrably with a kickstand. Also sort of thinking of whether there's a case I can put over the top of the case, maybe a UAG exoskeleton.
mistermojorizin said:
I have gotten more used to it. I will probably keep this case on until a more rugged case comes out, preferrably with a kickstand. Also sort of thinking of whether there's a case I can put over the top of the case, maybe a UAG exoskeleton.
Click to expand...
Click to collapse
Really wish they made the UAG Metropolis for this. Had on an ipad pro and the tear away cover is fantastic. Love that case(Hated IOS though and never really used it)