Just got it today from Newegg. Came in a padded large envelope.
It's nice feeling, I like the touch of the sleeve.
Inserting the Transformer is a bit hard, takes some force to slide it in.
Very form fitting, but it still does move around in the case by itself.
Dust and pet hair stick to this thing like magnet!
Closing the sleeve is very satisfying, feels like it's magnetized (but not).
When inserted correctly so the rear camera is perfectly centered, the sleeve does look like it blocks the light sensor and front camera, but it does not.
When the Transformer in the sleeve is position in it's two "modes" it bounces a lot. Tapping the screen bounces the Transformer. Especially bothersome if you're playing a game.
I don't like the way the Transformer is in the case. It should be the other way around.
If you're just holding the Transformer the correct way, the flap of the sleeve hangs down towards you, so you have to fold it back and hold it. It would have been better if it was the other way, so the flap is on top. (Of course you can put the Transformer upside down, but you won't have access to power/volume/etc...)
Obviously they didn't do this because of the rear camera, but the way it is right now, it's still sorta weird, you'd have a huge flap hanging down while you take a picture with the rear camera.
One other thing I don't like are the edges. The case is made of 2 pieces that's glued and crimped at the edges, like a ravioli. It bugs when holding the unit in the sleeve.
In all, it's ok, it'll work until something better comes along (doubt it). Before the sleeve I just had my Transformer sitting on my desk while charging overnight. So this will be nice to keep it protected a bit. Also having it on the low stand mode in front of my in front of my computer monitor is great.
One last thing. You can't close the lid while it's charging/plugged in.
EDIT: After a week's use:
This Sleeve IS NOT going to last. I've taken it in and out of the case several times, used it in front of my computer in both "modes", used it on the bed next to me, used it on me in bed, moved it around, held it portrait while playing a game, used it with the cover folded to the back, taken it to the bathroom, etc,, etc,, etc,, ....
The way the Tablet rests on the opening, is wearing out the fold. It's going to wear out and rip soon.
Right now this is the ONLY real case for the Transformer, and if you have to have one, I guess get it.
I want InCase to make a case for this, but seems like they're Apple fans only. I want a rubberized snap on back case with a hard cover or something.
EDIT: I wish for a case like the Xoom has by Motorola: http://goo.gl/RdLrU
PICTURE TIME!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Apple must have had left over inventory on clearance
does it block the ports that allow you to dock it to the keyboard?
freekyfrogy said:
does it block the ports that allow you to dock it to the keyboard?
Click to expand...
Click to collapse
Yes. Only the center USB/charging port is accessible.
I bought one myself from newegg as well... nice sleeve, but definitely not worth $40 IMO. But i guess we pay a premium for being impatient.
Maybe I am crazy but I think Asus screw up on the cover. I noticed on mines that the Asus logo is upside down, meaning that if you flip open the lid with the ASUS LOGO (facing up) the tablet is upside down.
dazz87 said:
Maybe I am crazy but I think Asus screw up on the cover. I noticed on mines that the Asus logo is upside down, meaning that if you flip open the lid with the ASUS LOGO (facing up) the tablet is upside down.
Click to expand...
Click to collapse
That's my complaint.
If you have the sleeve closed and looking at the front with ASUS correct, then you flip open UP the cover, yes your Transformer is upside down.
I too don't like this, especially some fullscreen apps, won't rotate EVERY direction, so if you have the Transformer in the case, tilted on the desk, the app will be upside down since you're using the Transformer upside down.
nxt said:
That's my complaint.
If you have the sleeve closed and looking at the front with ASUS correct, then you flip open UP the cover, yes your Transformer is upside down.
I too don't like this, especially some fullscreen apps, won't rotate EVERY direction, so if you have the Transformer in the case, tilted on the desk, the app will be upside down since you're using the Transformer upside down.
Click to expand...
Click to collapse
Unbeliveable that they could screw up on something that simply.... come on Asus!!
nxt said:
Dust and pet hair stick to this thing like magnet!
Click to expand...
Click to collapse
OK, that's a deal breaker for me
I just take a pet hair roller to it, comes right off I like the case, but if one comes along that has the same functionality but doesn't cling to (or at least show it as well) dust and hair, I'm on it.
Just got mine. It is a really nice fit, and actually feels pretty good quality (still not worth $40 ).
I see exactly what you guys are talking about: I guess it just depends on which way you have it oriented. Either way there will be a time when it's going to be upside down, so I guess there was really nothing they could have done.
Oh well. I just wanted a case that could stay on it while I used it. This gets the job done. I feel like it will do a pretty good job protecting it.
Yeah, it's definitely not perfect - I also just noticed that the microSD is blocked (why would they do that?). And it's not worth $40, imo - more like $20. Still, our options are limited right now so it's still better than not having anything at all.
roebeet said:
Yeah, it's definitely not perfect - I also just noticed that the microSD is blocked (why would they do that?). And it's not worth $40, imo - more like $20. Still, our options are limited right now so it's still better than not having anything at all.
Click to expand...
Click to collapse
Agreed!
I wouldn't mind using one of those cheap $15 ebay or buy.com cases with the simulated leather. They use magnets for closing, have a bit more padding for protection, and are a bit more rigid.
CoBrA2168 said:
I see exactly what you guys are talking about: I guess it just depends on which way you have it oriented. Either way there will be a time when it's going to be upside down, so I guess there was really nothing they could have done.
Click to expand...
Click to collapse
The thinking is probably that, with the exception of the volume buttons (and Asus logo if you're anal), the orientation of Honeycomb tablets isn't all that important due to the lack of buttons on the face of the tablet. I keep mine in the typing position mostly, and I've gotten used to the volume being upside-down Though it might be cool if there was an option to flip the volume keys automatically when flipping the tablet.
Got mine this morning. It's definetly not worth 40 dollars but its not too bad of a case and the only realistic option at the moment.
Sent from my Transformer TF101 using XDA Premium App
Now with the tablet standing up its 10x much easier to use, no more sore neck.
anyone know where i can find in stock apart from newegg... I just had a few issues with newegg before and don't wish to buy from them they just pissed me off.
most all cases like this have the same orientation. xoom case that i have is the same way. I just always used the xoom upside down since most things work like that anyway.
Thanks for the pictures OP. After all the "It's definitely not worth $40" comments, I'm seriously considering cancelling my Amazon order.
Does anybody know of any other decent cases?
mustafazr said:
Thanks for the pictures OP. After all the "It's definitely not worth $40" comments, I'm seriously considering cancelling my Amazon order.
Does anybody know of any other decent cases?
Click to expand...
Click to collapse
There's no other case that's specially made for the Transformer that can do what the Asus Sleeve does.
Related
http://www.invisibleshield.com/smartphone/htc/touch-cruise.php
Shame it isn't listed for the Orbit 2.
I have been using one on my Ipod touch and it really is excellent and feels right for touch screen.
I once got an Invisible Shield for my 750 and returned it. The material felt very sticky and grainy and I felt it more suited to smartphone(non-touch) devices.
I have ordered one and am waiting for to apply. Having browsed in Kaiser and Elf forum that the Shield is good for protection against scratch. There are posts said that it is quite tacky while some others claimed there is no problem for stylus using.
if you have the full bodyshield wont u lose the rub feeling on the back?
Aleemz said:
http://www.invisibleshield.com/smartphone/htc/touch-cruise.php
Shame it isn't listed for the Orbit 2.
Click to expand...
Click to collapse
I've got one on my IPOD, and it does great. However, I'm not sure it would be a good fit for the TC. They are a bit "tacky", so I don't think that it would work well. I do recommend that you get one for anything that's not touch screen though. I think that the full body version would actually make the device a bit easier to hold. My 8125 felt more secure in my hand with the Invisible shield on than the TC does with it's rubberized back.
One thing to note, the whole body shield on my 8125 eventually got dirty around the edges and I couldn't get it cleaned. This was mostly around the areas that were getting the most abuse though. I eventually took those pieces off since they wouldn't stick anyway.
I'm waiting/hoping for Boxwave to come come out with their screen savers for the TC. I've got one on my old Cingular 8125, and it fits great (almost a perfect fit..no discernable gap around the edges). And they are touch friendly also. They have a "Krystal" clear version, which I'm using, and one that's supposed to help with glare. I don't use it cause I think it distorts the picture some.
angler said:
I have ordered one and am waiting for to apply. Having browsed in Kaiser and Elf forum that the Shield is good for protection against scratch. There are posts said that it is quite tacky while some others claimed there is no problem for stylus using.
Click to expand...
Click to collapse
Can you please put a review here, when you've got it?
The cutouts:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I actually bought the kit as well. Currently I am using the martin fields screen protector and its looking and working great.
I have 1 concern with the invisible shield, the solution spray.
Do you guys feel comfortable getting a liquid onto your device. Am I missing something here. You are supposed to spray your device and spray the shield with this solution as part of the process of applying it and pulling out all the bubbles.
I really dont feel comfortable spraying a liquid on an expensive device.
Your thoughts on this.
darkazally said:
I actually bought the kit as well. Currently I am using the martin fields screen protector and its looking and working great.
I have 1 concern with the invisible shield, the solution spray.
Do you guys feel comfortable getting a liquid onto your device. Am I missing something here. You are supposed to spray your device and spray the shield with this solution as part of the process of applying it and pulling out all the bubbles.
I really dont feel comfortable spraying a liquid on an expensive device.
Your thoughts on this.
Click to expand...
Click to collapse
you spray the liquid on the skin/shield... i've used their products on just about every PPC/Smartphone i've had in the past 2 years without any problems... unfortunately, they don't have a shield for the O2 Orbit 2 version (yet).
Great thread! I desperately want an Invisible Shield to protect my entire Cruise, but I also desperately don't want to sacrifice too much TouchFLO performance when using application such a TouchPal, Tengo Thumb, etc.
Would anyone with an Invisible Shield be able to comment on how realistic (or otherwise) the following video would be with one installed?
http://www.youtube.com/watch?v=8yTN4wC_ml8
I think a video is the best way to objectively judge how badly the sensitivity problem might affect some people and not others (youTube certainly helped me understand with video driver/TomTom problem).
I have had the Invisible Shield on my Touch Cruise for a couple of days now. I got the full body which does a pretty good job of covering it. It does not cover the bottom area where the usb port and mic goes. I don't know why they forgot this area but I am happy with it. I usually use a stylus with letter recognition and the only thing I have noticed is for opening the cube I have to press a little harder. I tried like in the video and it works that way. I would try it you have nothing to lose they have a 30 money back guarantee. I use it on several devices and I am happy with it.
mpf54 said:
I have had the Invisible Shield on my Touch Cruise for a couple of days now... I tried like in the video and it works that way.
Click to expand...
Click to collapse
Excellent, thank you so much for the feedback, mpf54!
Did you notice any problems at all with the Cruise recognizing all of your finger taps after applying the Invisible Shield? Or were you able to type at a similar speed as before you applied the shield?
I use a stylus usually. There was a little getting used to it being covered. But all that was is I have to press a little harder. I like it.
Well I got my shield and was very excited to try it out on my TC. Directions are pretty straight forward so you think its going to be simple, wrong. After 30 minutes I had only installed the back piece and it looked really bad. The sides are almost impossible to line up perfect and seem a tad bit short in width. After using a lamp, blowdryer, and tongs I finised putting all the pieces on the device. The instructions say to allow 24 hours so that the pieces attach to the device. I finished at 7pm and let it set till 7am the next morning. I must admit the next day the device looked much better then the night before. I was excited to test out my device then noticed after all the precautions I took there was dust underneath right in the middle of the screen. Then I noticed that the bottom part of the device is not protected. I decided to take advantage of the 30 day refund policy and am going to send it back. I think that for this device the pieces are just to difficult to align and a tad bit off. I love invisible shield products I have one on my ipod, but for the TC I do not recommend unless you are a very meticulous and attention orientated person.
While I will admit is is knid of a pain to put on the full body. I am happy with mine. It took several days for it to look really good but it does.
turcomora said:
I think that for this device the pieces are just to difficult to align and a tad bit off. I love invisible shield products I have one on my ipod, but for the TC I do not recommend unless you are a very meticulous and attention orientated person.
Click to expand...
Click to collapse
Just wanted to hear this. I was hesitate to buy one or not. Now i know: i won't
eami said:
Just wanted to hear this. I was hesitate to buy one or not. Now i know: i won't
Click to expand...
Click to collapse
It is a pain to put on the full body but all you really need is the screen cover. I think this is the best one you can get. It took a a while to put it all on but it looks gook and the protection is great.
Bought myself an Invisible Shield screen cover and I must admit I'm pretty satisfied. Better than the original screen cover. Much less fingerprints (plus it's much more easier to get rid of them) and although it takes some time to get used to it, the overall perception is good. Would recommend it.
mpf54 said:
It is a pain to put on the full body but all you really need is the screen cover. I think this is the best one you can get. It took a a while to put it all on but it looks gook and the protection is great.
Click to expand...
Click to collapse
At the moment i'm using a brando metal case. Do you think inv.shield can give the same protection to the screen? I've watched almost all videos on youtube about inv.shield and never saw any video that tried to test a PDA-phone touch screen in the same way as we can see on iPod at the official video. I'm pretty sure an ipode screen (covered by plexy) it much more stronger than an "avarage" touch screen. So those videos will never be a good example for us. By the way... have you seen the new case-mate case for iPhone yet? I really want a cover like that. I hope those guys will make for Polaris too
You've probably all seen this case on the Sprint site. It seemed to be just what I was looked for. A solid case (don't care for rubbery) with kickstand. Why they only offer this in purple is beyond me. Google searching only showed pink as an alternative. But I was really liking the idea of the kickstand that props it 3 ways. It's a really smart idea. So I picked up a purple one from the sprint store. I figured I'd paint it or skin it somehow. A trip to the hardware store found me some paint for plastic that had a bit of texture. I was worried that a glossy or even a dull spray paint would look cheap. But this has a "hammered" finish. The cap had a nice feel to it (which is supposed to be the same texture as the paint). So I tried it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case has a VERY glossy smooth purple coat. I figured no paint would stick so I took some 180-grit sandpaper to it to remove some of the gloss. In one spot I sanded long enough to remove the paint to see what the plastic was like. It was black and it didn't look too bad. Smooth, kind of dull, but not bad. Based on that, I thought I would remove all the purple paint....stupid. Took a while and when it was done the plastic looked crappy. No problem cause I had the paint anyway.
Following the directions, two THIN coats within a few minutes and 24 hours to dry.
I didn't know what to expect cause after all, it's just spray paint. The texture looked nice, but I waited the full 24 before I felt it. Hoping it wasn't too cheap or sticky feeling, I gave it a go. AWESOME. It has exactly the texture I would have hoped for. I mean, I'd prefer a matte finish like the battery cover. But short of that, it's great. Smooth enough to feel nice, textured enough to not be slippery. For a $5 can of spray paint, I'm impressed. The paint seems to have adhered to the plastic very well.
Check it out. Sorry for the poor lighting, but you can get a idea of color and texture.
I've also got a can of clear enamel. I thought I would need it, but after feeling how this came out, I don't want to chance it being worse (sticky, too slippery, or even spider cracking). Maybe some of you painting experts can chime it and tell me if I'll really need it. So far I'd say no. My only worry is durability, but after a few days, it's great. I thought it'd be most susceptible to wearing off within the first few days, but nothing of the sort. I've not been exactly gentle with it either. If it holds up looking and feeling this good, I'm very happy.
Other thoughts:
-The 3-way kickstand is sweet. Holds solid. Less tippy than my evo 4g on it's kickstand. Especially with the charging cord connected.
-The camera ends up recessed a few mm. Feel perfectly safe setting it down.
-The screen is also recessed a couple mm. So it won't rub on a flat surface if you set it down.
-The top and bottom are NOT PROTECTED. Not a big deal to me, but some might not like it. If it fell straight, the top or bottom should barely hit if at all. If it fell at just the right angle, top and bottom are scratched.
-I'd prefer a metal kickstand, but this is about a solid as a plastic one gets. The mechanism is a bit unique with a sliding pivot. It clicks open and closed.
Overall, really happy so far. Just couldn't deal with that purple, ugh.
7/20/11 - Inductive Charging - Touchstone style.
Ok, so I had 2 Palm Pre phones in the house and 3 touchstones doing nothing. So I was inspired by drinkwd40's guide on Good and Evo. However, instead of pulling the battery cover off, I decided to do it in the case. There is enough room to fit all the parts with little change in the fit of the case. The biggest difference is that the screen is only recessed about 1mm now instead of 2.
Sorry for some of the pics. Gotta get more light in my man-cave.
Touchstone parts
What I did different is that I didn't use the magnets. I know, I know...That's most of the cool factor with the touchstone. It's true. But I like the idea of a working compass. So I didn't use the small metal discs in the case and I took apart the touchstone to remove the magnets. Now it is more like a powermat type thing.
Here is the how the receiver parts fit in the case.
The worst part was hacking up a usb cable and trying to play nice with the pins. I used an epoxy nub on the plug to cover everything. I left it to stick out a bit so I can remove it easily for USB connection (need to get my root on!) as well as MHL when I can get an adapter. It sticks out about 2mm or so past the side of the case. I does't bother me at all because of where it is at. If I did it over again, I'd fight harder to get the nub a bit smaller. Something i may try to improve on later.
For now, I just put the touchstone in a simple enclosure so I can set the phone down and have it charge.
My plan is to make a nicer base for the touchstone. Probably one that props it up on an angle like the touchstone does.
Charging away!
Notes:
-The receiver adds just a bit of thickness behind the phone, so it pays to "shim" around other places to even it out. Otherwise it feels a bit uneven in the case. As it is now, the phone is nice and snug. Also, shimming it a bit will make sure the case doesn't bulge at all.
-I haven't noticed that it takes any longer to charge, but I haven't had it working but a couple days.
-I wonder if having the touchstone receiver constantly connected via the usb port will actually draw down the battery any. I hope not since this must be how Palm designed it, but who knows?
-Just having the coil behind the phone makes the compass a bit off. But it still seems to work, just slightly off. In the year I had my OG EVO, I used the compass like 3 times for Google Sky Map. But with more and more AR apps around, I'd like to keep it functional, just in case. If I remove the coil, it seems to line up correctly again. So I could always just pull the phone out of the case.
-On the kickstand with the connector down, it stands on the nub just a bit. No biggie at all, doesn't tip or anything. Here's where I could make it a bit smaller.
A hard case that doesn't add too much bulk, in a color I like, with a kickstand that props the phone 3 ways, and wireless charging!... If I can't be happy with that, I don't know what would do it. Too much work though
8-2-11 Update
Got a few more pics of the charging base and the case after I added clear coat.
Basically I just cut the bottom of the charging box I had made with the touchstone in it. Now it holds the phone on an angle like the touchstone would.
The round felt pads are to level things out while its on the charger.
The clear coat took much of the hammered texture feel away, but added a smoothness that is kind of nice as well. It's not slippery at all and I feel like I'm not wearing into the paint now. Here's how it turned out.
I doesn't look too much different, but does have a different feel to it. I like it.
Someone asked what it is like behind the kickstand. Here's a pic where you can see the touchstone coil because it is totally open under the kickstand.
I think I'm done now. Of course, that's what I said last time...
Looks nice!
That does look nice. =)
I'm not too familiar with this case so I have one quick question about the kickstand. When it's not in use and is collapsed, is there a way to lock the kickstand from re-opening?
Thanks.
Good job it looks better. I haven't seen the purple one but I've seen a red version which didn't look that good either.
Nice job man!! I also could not do the purple or the red. Why in the world would that not offer it in black or gray? Makes no since to me...
mail2n said:
That does look nice. =)
I'm not too familiar with this case so I have one quick question about the kickstand. When it's not in use and is collapsed, is there a way to lock the kickstand from re-opening?
Thanks.
Click to expand...
Click to collapse
Yes, the kickstand has small plastic latches on the bottom that hold it closed. No worries about it opening on its own.
Plus the kickstand is not floppy at all. The slide mechanism has some friction. If you had it unlatched and shook the phone around, the kickstand wouldn't move. It latches both fully open and fully closed.
Do you have to sand it? Call me lazy but it would be nice just to paint over it. And thanks for the heads up. It looks great.
Thanks for answer. I just ordered one.
Sent from my PG86100 using XDA Premium App
f1nzup said:
Do you have to sand it? Call me lazy but it would be nice just to paint over it. And thanks for the heads up. It looks great.
Click to expand...
Click to collapse
You could try it with no sanding. It's just that the purple is so glossy, it may have trouble sticking. I didn't try so I don't know for sure.
Honestly 15 minutes worth of light sanding should be more than enough to remove the gloss. You just want a little more texture for the paint to adhere to.
Love this case but wit the gay colors that's a no no for me Lol, if there was a black one I'm sold.
Sent from my PG86100 using XDA App
aalopez10 said:
Love this case but wit the gay colors that's a no no for me Lol, if there was a black one I'm sold.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Agreed. I'd be all over a black or grey or even a green one. Looks to be the best kickstand solution I've seen so far
Okay, now that you've had it a few days, how do you feel about the kickstand? Do you think it will be able to handle the wear and tear of everyday use? Thanks for your input. It's very much appreciated.
Sent from my PG86100 using Tapatalk
I'm so glad I got the otterbox case.
I have mine for a week now. So far the kickstand is holding up. Don't know if that will be true over a few months. But then nothing is certain.
f1nzup said:
Okay, now that you've had it a few days, how do you feel about the kickstand? Do you think it will be able to handle the wear and tear of everyday use? Thanks for your input. It's very much appreciated.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I'd say the kickstand will hold up fine if you don't use it constantly. If you are always clicking it in and out of the back, then the little nubs that hold it might wear off after a while. Easily fixed tho. And it is plastic, so it can break if you are too rough, but it's not too flimsy. Better than I expected anyhow.
7-20-11
* Updated OP with touchstone charging mod
That was work a bit of work, let me tell ya...
Inspired by your work I de-pinked a Body Glove Vibe. Definitely not an expert at painting etc, but it was easy and the results look great. The hammered paint really does provide a great surface.
Sent from my HTC Evo 3D using XDA Premium App
I got my Body Glove today and used Hammered Black. It's drying now so we'll see how it looks tomorrow. I think I'm really going to like the black. Thanks again for the post!
Sent from my PG86100 using Tapatalk
a couple weeks in now and the hammered black is holding up good. I never did clear coat it. Still can I guess. Let me know how it works out for you guys.
I also made the touchstone charger look much nicer. I'll throw up a couple more pics soon.
I must say, the paint makes it easier to hold, and I like that. It's worth painting if only to make it less slick, but the hammered black looks good anyway.
Sent from my PG86100 using Tapatalk
It's $20 on amazon. The forum won't let me post pictures of it or links.
Does anyone have one, how sturdy is the kickstand, kinda looks a little flimsy to me? Also, can it withstand being dropped, saying on the corner of the phone? I know they make similar cases for other phones, and could only find a couple of youtube videos, but the guy didn't have the phone in the case nor try the kickstand out.
Thanks!
EDIT:
I went out and got it. It does cover the speaker, but it doesn't muffle the sound at all, or make it lower. The case is a pita to take off though, but I'm not planning on taking it off and on. I couldn't find a case that was a hybrid and had a kickstand besides this one. It has a raised edge over the front screen, so you dont have to worry placing it front facing on a surface. The cameras are also sunken into the case, so those will not get scratched from setting it down on it's back. The kickstand works in all three positions. So if you want to charge it while watching a movie you can. The kickstand may feel flimsy, but it locks into place and does the job. It has rubber at the end on it to make sure it stays put.
Overall it's a great shock absorbing case with a kickstand. I had a speck candy shell for my iPhone, and it saved my phone numerous times getting out of cars and trucks with my phone on my lap and forgetting about it and it hits the asphalt, and I'm confident this case will do the same.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Case-Mate-CM015756-Pop-Case-Pack/dp/B0058D286S/ref=sr_1_23?s=wireless&ie=UTF8&qid=1312170043&sr=1-23
I think it looks pretty sweet!!!
This case from CaseMate blocks the speaker on the back
I got this case for free at the place I got my 3D cause they took days to get me a replacement handset. I've used it once and will never use it again. It is hard to put on and a pain in the ass to take off. It latches on to your battery door like a pit bull and contorts it when trying to take it off. The kickstand seems really frail too.
Teedoe3 said:
This case from CaseMate blocks the speaker on the back
Click to expand...
Click to collapse
This case looks good, but its a no go if it covers the speaker. Any way to cut out a piece around the speaker?
tygger said:
This case looks good, but its a no go if it covers the speaker. Any way to cut out a piece around the speaker?
Click to expand...
Click to collapse
I went out and got it. It does cover the speaker, but it doesn't muffle the sound at all, or make it lower. The case is a pita to take off though, but I'm not planning on taking it off and on. I couldn't find a case that was a hybrid and had a kickstand besides this one. It has a raised edge over the front screen, so you dont have to worry placing it front facing on a surface. The cameras are also sunken into the case, so those will not get scratched from setting it down on it's back. The kickstand works in all three positions. So if you want to charge it while watching a movie you can. The kickstand may feel flimsy, but it locks into place and does the job. It has rubber at the end on it to make sure it stays put.
Overall it's a great shock absorbing case with a kickstand. I had a speck candy shell for my iPhone, and it saved my phone numerous times getting out of cars and trucks with my phone on my lap and forgetting about it and it hits the asphalt, and I'm confident this case will do the same.
Didn't know that you could stand it horizontally on both sides. That's neat. Any pics of the kickstand itself?
tygger said:
Didn't know that you could stand it horizontally on both sides. That's neat. Any pics of the kickstand itself?
Click to expand...
Click to collapse
I don't have my camera right now, but here's a picture I found online.
dcfella said:
I got this case for free at the place I got my 3D cause they took days to get me a replacement handset. I've used it once and will never use it again. It is hard to put on and a pain in the ass to take off. It latches on to your battery door like a pit bull and contorts it when trying to take it off. The kickstand seems really frail too.
Click to expand...
Click to collapse
It REALLY was a major pain to take off. Impossible for someone who plans on swapping out batteries a lot. And it also made it extremely difficult to turn the phone on and off via the power switch. I'm sending it back.
I'm going to get this one when I get refunded for the Casemate.
http://www.wirelessground.com/htc-evo-3d-body-glove-vibe-slider-pink.html
ScottSNX said:
It REALLY was a major pain to take off. Impossible for someone who plans on swapping out batteries a lot. And it also made it extremely difficult to turn the phone on and off via the power switch. I'm sending it back.
I'm going to get this one when I get refunded for the Casemate.
http://www.wirelessground.com/htc-evo-3d-body-glove-vibe-slider-pink.html
Click to expand...
Click to collapse
Does this case come in like black or blue?
ahess0815 said:
Does this case come in like black or blue?
Click to expand...
Click to collapse
Not that I'm aware of.
ScottSNX said:
It REALLY was a major pain to take off. Impossible for someone who plans on swapping out batteries a lot. And it also made it extremely difficult to turn the phone on and off via the power switch. I'm sending it back.
I'm going to get this one when I get refunded for the Casemate.
http://www.wirelessground.com/htc-evo-3d-body-glove-vibe-slider-pink.html
Click to expand...
Click to collapse
Yeah, I don't plan on swapping batteries. I rather have something that's going to protect my phone from drops, seeing how I do that a lot when getting out of the car,
i work for sprint so i get to test cases and other stuff out all the time. this case is sweet looking on the phone, although its a little bulky. as stated before on this thread, its a pain in the a** to take off and its a pain to turn on and off via the power switch. the kickstand is very very flimsy as well. too bad cuz this is the sweetest looking case out there with a kickstand.
comes in black also.
I ordered one and it showed up today, I'm definitely a fan. I had one of the cheap snap together cases, and sadly that actually scratched the phone cause it didnt fit tight enough to keep dirt out.. this is so much better. feels so much more solid in my hands, and well protected. swapping batteries.. yeah it makes that a pain. but it's a price I'm willing to pay. And the kickstand seems flimsy but it does the job, I have a hard time believing it'll be a problem cause it's actually so flexible, probably pretty hard to break it.
badluckkyle said:
I went out and got it. It does cover the speaker, but it doesn't muffle the sound at all, or make it lower. The case is a pita to take off though, but I'm not planning on taking it off and on. I couldn't find a case that was a hybrid and had a kickstand besides this one. It has a raised edge over the front screen, so you dont have to worry placing it front facing on a surface. The cameras are also sunken into the case, so those will not get scratched from setting it down on it's back. The kickstand works in all three positions. So if you want to charge it while watching a movie you can. The kickstand may feel flimsy, but it locks into place and does the job. It has rubber at the end on it to make sure it stays put.
Overall it's a great shock absorbing case with a kickstand. I had a speck candy shell for my iPhone, and it saved my phone numerous times getting out of cars and trucks with my phone on my lap and forgetting about it and it hits the asphalt, and I'm confident this case will do the same.
Click to expand...
Click to collapse
Dude how did u get it to stand up with the charging port on top?? Everytime i try the kickstand closes and the phone falls over....
R.I.P. HD2 hello EVO 3D!!
Yes there is. the rubber is very soft on the inside so I got a razor blade and cut the section out rite over the speaker sound is a lot better now.
Sent from my PG86100 using XDA Premium App
You have to open the kickstand up all the way. It almost opens to a 90 degree angle
Sent from my PG86100 using XDA Premium App
jyazzie110 said:
Dude how did u get it to stand up with the charging port on top?? Everytime i try the kickstand closes and the phone falls over....
R.I.P. HD2 hello EVO 3D!!
Click to expand...
Click to collapse
If you open it all the way, it locks, then you're able to stand it on it.
Ive had this case (black) for 2 or 3 weeks. Its very tight on the phone, I like that it fits well and wont fall off. I do usually have to use a butter knife on the bottom (no buttons to ruin) to pry it off. I love it. Ive seen it in Black White and Pink. Got it on ebay for $20. The kick stand is kinda flimsy, but hasnt fallen off yet. Hope this helps.
It is a great case I have had mine for a few weeks the only problem I have with it is it will block a little bit of the 4g signal. I have tested it its not a big issue but is ur signal is week it will kick u off 4g
Sent from my affliction/viper 3vo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
outside of the charge port in the center remember to pull out the far left and right rubber tabs so the transleeve metal hinge clips can secure themselves.
transleeve attatched
transleeve closed and protecting the top of the asus prime
Prime turned over. Transleeve folded origami style for kickstand use
self explanatory
thinness and charge port unhindered
Sent from my Samsung Galaxy S II t989
although i would prefer the magnetic attatchment of the ipad2 style sleeve this works quite well.
however i do feel it is a bit overpriced as i purchased it from amazon for over 30 bucks. it feels a little "cardboardy" lol. its soft refined feel will definitely protect the screen from blemishes and scratches though. also dont get white! lol this can get dirty quite easily
Sent from my Samsung Galaxy S II t989
I'm considering returning mine. It's very crappy quality in my opinion. Definitely not worth $39.99
agtitan said:
I'm considering returning mine. It's very crappy quality in my opinion. Definitely not worth $39.99
Click to expand...
Click to collapse
yeah it feels more like it should cost 15 dollars. asus should have went more of a metal/magnetic type sleeve..but i suppose they dont wanna get sued by apple
Sent from my Samsung Galaxy S II t989
I would have liked that the sleeve is magnetic as well. Got mine today. Works fine but yes over priced.
Sent from my Transformer Prime TF201 using Tapatalk
Haha guys don't complain about your price in Europe it's 49,99€ Oo
Gesendet von meinem Desire HD mit Tapatalk
from pics it looks nice. can it be folded bck to cover the back of prime when holding it? To make it not as slippery can it also be laid flat,folded origami mode, to angle tablet for typing and such?
I feel the same way - it kinda sucks.
Not at all comfortable to use when cover is flipped back and you're holding it in your hands. I had one of the little wire clasps inside the hook things break off too. It just feels really cheap and flimsy, not at all at the same level of quality as the iPad smart cover.
Also, this is weird, but seems like the magnet may be messing with the tablet! I was typing with the cover in back and the keyboard and tablet started freaking out, as if a ghost had taken over, lol. Random keys started typing, home screens were scrolling back and forth on their own, etc. Happened twice with the cover on and I had to hard reboot by holding down the power button until it shut off. I took off the case after that and everything was fine again, so weird!
Sending it back next week.
Sent from my Galaxy Nexus using xda premium
demandarin said:
from pics it looks nice. can it be folded bck to cover the back of prime when holding it? To make it not as slippery can it also be laid flat,folded origami mode, to angle tablet for typing and such?
Click to expand...
Click to collapse
Yes it can
Sent from my Transformer Prime TF201 using Tapatalk
aimfire72 said:
I feel the same way - it kinda sucks.
Not at all comfortable to use when cover is flipped back and you're holding it in your hands. I had one of the little wire clasps inside the hook things break off too. It just feels really cheap and flimsy, not at all at the same level of quality as the iPad smart cover.
Also, this is weird, but seems like the magnet may be messing with the tablet! I was typing with the cover in back and the keyboard and tablet started freaking out, as if a ghost had taken over, lol. Random keys started typing, home screens were scrolling back and forth on their own, etc. Happened twice with the cover on and I had to hard reboot by holding down the power button until it shut off. I took off the case after that and everything was fine again, so weird!
Sending it back next week.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Wow that sucks. that hasn't happened to me but I can definitely picture it happening due to the quality of the sleeve
Sent from my Transformer Prime TF201 using Tapatalk
I was just checking at the Apple store for reviews about the smart cover and they are not very good either.
I think we all knew the Asus cover was not going to be the same.
The magnetic interference when folded back it's the only one thing that's scaring me.
Can someone confirm this issue?
Also, it looks from this picture like the cover blocks the speaker when it's in upright mode. Can anyone confirm? If it does, is the sound completely muffled?
wynand32 said:
Also, it looks from this picture like the cover blocks the speaker when it's in upright mode. Can anyone confirm? If it does, is the sound completely muffled?
Click to expand...
Click to collapse
Actually it doesn't really effect the sound since the sound waves seem to reflect/bounce back from the cover making it actually sound louder. Playing some music with it on right now
Sent from my Transformer Prime TF201 using Tapatalk
Hmm guess this will just be a tie me over till something better. mine is sitting at my mailbox in the states.. but wont have it until 28th
xXxDieselxXx said:
I was just checking at the Apple store for reviews about the smart cover and they are not very good either.
Click to expand...
Click to collapse
That seems insane to me. I wouldn't dream of owning my iPad 2 without the smart cover--and everyone else I know that has one would say the same thing.
It just looks like Asus failed to copy the best part of the Apple cover, and also didn't bother to ship a leather version. Strike 1 & strike 2 if you ask me.
xXxDieselxXx said:
The magnetic interference when folded back it's the only one thing that's scaring me.
Can someone confirm this issue?
Click to expand...
Click to collapse
Yeah, I'd like to see if it was just me and something else was causing it to go haywire, or if it was indeed the case?
It didn't happen right away, just after typing on it for a little bit. I took off the case and used the tablet for about 2 hours straight after, and all was back to normal.
Sent from my Galaxy Nexus using xda premium
Also the metal hinge only has padding on one side, which means that when the cover is folded behind the tablet, there's nothing between the metal hinges and the metal back of the tabled (easy scuff marks).
arrrgh said:
Also the metal hinge only has padding on one side, which means that when the cover is folded behind the tablet, there's nothing between the metal hinges and the metal back of the tabled (easy scuff marks).
Click to expand...
Click to collapse
Thanks for pointing that out. I can easily see that happening over time
Sent from my Transformer Prime TF201 using Tapatalk
Yeah I had the black cover, only had it on for like 2 days and now i have two little dents and scratches where the metal hits the back of the prime, thank god i noticed before it got worst (its not too bad now but would get a lot worst im sure.).
jzen said:
Yeah I had the black cover, only had it on for like 2 days and now i have two little dents and scratches where the metal hits the back of the prime, thank god i noticed before it got worst (its not too bad now but would get a lot worst im sure.).
Click to expand...
Click to collapse
That kills the chances of me ever buying that cover then, thanks. To be perfectly honest, after the crappy quality of the "official" cover for the original TF, I wasn't really considering this one anyway.
I have been waiting long time for a cheaper alternative, and today I found this case on Ebay.
So I just ordered it through free shipping, normally it takes 2 weeks to get free shipping stuff
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/BASEUS-Unique-Leather-View-Flip-Smart-Battery-Case-Cover-For-Galaxy-Note-3-N9000-/171174026160?pt=US_Cell_Phone_PDA_Cases&var=&hash=item27dac45bb0#shpCntId
I'm gonna give you a feedback when I receive it...
Enjoy
Nice find! I wish they wouldn't have made the bottom part of the case a different shade/color.
HAZA12D_HYPERDRIVE_NOTE3
haza12d said:
Nice find! I wish they wouldn't have made the bottom part of the case a different shade/color.
HAZA12D_HYPERDRIVE_NOTE3
Click to expand...
Click to collapse
Even though I agree with you, I still think it is kind of unique and the colors mix is nice.
Alright here we go.. I purchased this on the 21st and got it today which is not bad considering it came from China. I'm not that great writing a product review so I hope pictures speak louder than words.
I'll just describe the product instead of listing the pros. All around this case is pure plastic, I can't put my thumb on it but it is plastic and screen side (with the window) is flexible (just like the OEM). The window is not glass so it'll be prone to scratches and finger prints. Comparing to the OEM case I feel that the window quality is pretty sturdy because the plastic window doesn't feel cheap when I bend it, tap it, or flick on it. Continuing on the front side, there is a speaker hole so you can listen on to calls. There is a indented quote "design endows product a life" midway below the case. And at the bottom.. yes it a metal button just like the metal design/quality of the home button of the actual phone.
Moving to the side, just like the OEM, there's indented prints for the + and - volume keys. Nothing much else to look here.
On the back, the Baseus logo is indeed metal and has a nice feel when you smooth your finger over it. The camera and lens is kept protected with the case on so it's not protruding out.
Functionality of the S-View: the two metal pins on the back of the case is indeed for the control of the sleep and awake feature for the phone. So when I close/open the S-view, it will awake or sleep and will show the regular OEM functions (i.e. S-View slide to unlock, camera, action memo, and music player shows up).
Cons:
three things that bug me about this case. Metal button in the front (really?), as you can see in the photos the case does not fully close all the way (won't bother me as much because the sleep function will works), and since it's flexible plastic I feel that the flap (the side plastic) overtime will wear out and rip.. well that just normal wear and tear of products.
Overall I'm actually very satisfied with this product. I didn't want to purchase the OEM S-view case and sought better alternatives for the S-view cases. I found this and I'm truly again satisfied. Try it guys.. for $20 it's worth it. It comes in different colors (I didn't find full colors, only two-toned). Let me know if you guys are getting it!!
Sorry of the pictures are showing up side ways, I'm not sure why it is. (pictures taken with Note 2)
For a Chinese product it doesn't look bad. Please keep us updated on durability. If Spigen doesn't release theirs soon I might consider this one.
Sent from my SM-N900P using Tapatalk
Deekayy said:
Alright here we go.. I purchased this on the 21st and got it today which is not bad considering it came from China. I'm not that great writing a product review so I hope pictures speak louder than words.
I'll just describe the product instead of listing the pros. All around this case is pure plastic, I can't put my thumb on it but it is plastic and screen side (with the window) is flexible (just like the OEM). The window is not glass so it'll be prone to scratches and finger prints. Comparing to the OEM case I feel that the window quality is pretty sturdy because the plastic window doesn't feel cheap when I bend it, tap it, or flick on it. Continuing on the front side, there is a speaker hole so you can listen on to calls. There is a indented quote "design endows product a life" midway below the case. And at the bottom.. yes it a metal button just like the metal design/quality of the home button of the actual phone.
Moving to the side, just like the OEM, there's indented prints for the + and - volume keys. Nothing much else to look here.
On the back, the Baseus logo is indeed metal and has a nice feel when you smooth your finger over it. The camera and lens is kept protected with the case on so it's not protruding out.
Functionality of the S-View: the two metal pins on the back of the case is indeed for the control of the sleep and awake feature for the phone. So when I close/open the S-view, it will awake or sleep and will show the regular OEM functions (i.e. S-View slide to unlock, camera, action memo, and music player shows up).
Cons:
three things that bug me about this case. Metal button in the front (really?), as you can see in the photos the case does not fully close all the way (won't bother me as much because the sleep function will works), and since it's flexible plastic I feel that the flap (the side plastic) overtime will wear out and rip.. well that just normal wear and tear of products.
Overall I'm actually very satisfied with this product. I didn't want to purchase the OEM S-view case and sought better alternatives for the S-view cases. I found this and I'm truly again satisfied. Try it guys.. for $20 it's worth it. It comes in different colors (I didn't find full colors, only two-toned). Let me know if you guys are getting it!!
Sorry of the pictures are showing up side ways, I'm not sure why it is. (pictures taken with Note 2)
Click to expand...
Click to collapse
ALL functions of Original SView Cover from Samsung work good ? If yes, i buy it NOW ... have you an ebay link ?
[email protected] said:
ALL functions of Original SView Cover from Samsung work good ? If yes, i buy it NOW ... have you an ebay link ?
Click to expand...
Click to collapse
So far I received calls fine, take pictures, write notes, and check text messages. Works fine and I like it.
Deekayy said:
So far I received calls fine, take pictures, write notes, and check text messages. Works fine and I like it.
Click to expand...
Click to collapse
Could you give me the ebay link where you buy your case ? I wish to be sure to buy the good one
In your pictures it looks as though when laid on its back the front cover holds open slightly. Is the hinged portion of the case a soft material that possibly could break in over time?
Sent from my SM-N900V using Tapatalk
[email protected] said:
Could you give me the ebay link where you buy your case ? I wish to be sure to buy the good one
Click to expand...
Click to collapse
http://www.ebay.com/itm/Baseus-PU-L...Cell_Phone_PDA_Cases&var=&hash=item27daa9b23b
Adrozz07 said:
In your pictures it looks as though when laid on its back the front cover holds open slightly. Is the hinged portion of the case a soft material that possibly could break in over time?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Like I said in the description. The case opens out a little bit, but after a day use of it, the case gotten use to being closed completely in my pocket and now it's closed all the way now. And like I said before, I can't find the specific name for the quality, but it's flexible plastic and from what I'm seeing the cover inside material is fabric so I wouldn't think the hinge will rip that easily.
TPU?
Deekayy said:
http://www.ebay.com/itm/Baseus-PU-L...Cell_Phone_PDA_Cases&var=&hash=item27daa9b23b
Like I said in the description. The case opens out a little bit, but after a day use of it, the case gotten use to being closed completely in my pocket and now it's closed all the way now. And like I said before, I can't find the specific name for the quality, but it's flexible plastic and from what I'm seeing the cover inside material is fabric so I wouldn't think the hinge will rip that easily.
Click to expand...
Click to collapse
Thank you very much !!! I buy it now and for the delivery time, ebay said 12 décember and 2 january ... How many time for you ? I'm in Belgium
According to the website the material is supposed to be PC + PU.
If anyone of you can read chinese, here you go:
http://detail.tmall.com/item.htm?spm=a1z10.1.w5003-4104061492.1.UjvRXR&id=35834424422
Tons of pictures to help you make a choice!
Good cover.
However on the front case there is not the hole for the home button. So the front case may not close properly.
Sent from my SM-N9005.MY using Tapatalk
vndnguyen said:
Good cover.
However on the front case there is not the hole for the home button. So the front case may not close properly.
Sent from my SM-N9005.MY using Tapatalk
Click to expand...
Click to collapse
What does that mean? Are you using a protruding home button sticker or something.
I have one of these too. I'm pleased with it, considering the price of it versus the S-view. I'm hoping over time the case will stay closed better.
Sent from my SM-N900V using Tapatalk
Deekayy said:
What does that mean? Are you using a protruding home button sticker or something.
Click to expand...
Click to collapse
Home button on ALL Samsung Galaxy models are protruding by default.
Bought one in White and Black. Really good cover. Does what the original cover does. The front of the cover does close properly for me and the home button doesn't cause the front to stay open. The only thing that was annoying me was the s view window has scratches on it already
husnain.mohammed said:
Bought one in White and Black. Really good cover. Does what the original cover does. The front of the cover does close properly for me and the home button doesn't cause the front to stay open. The only thing that was annoying me was the s view window has scratches on it already
Click to expand...
Click to collapse
Does the cover scratch the phone screen at all like the original s view one reportedly does ?
Sent from my SM-N900V using xda app-developers app
spartandawgs_03 said:
Does the cover scratch the phone screen at all like the original s view one reportedly does ?
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
I've not seen any scratches on the screen so far