How to unbrick Samsung Galaxy Ace - Galaxy Ace S5830 General

How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen after flashing froyo heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
Get the roms from sammobile site.
Be sure that you download de correct firmware for your device version.

Good mannnnnn ֱ

SuperMini said:
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it shoul come back to life.
Click to expand...
Click to collapse
Don't work for me...

you saved my day
I was about to send my phone to support centre!
Cool, brought back to life.
I wish we had a thread listing all these tricks.

my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,

isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution for that. Did you try making usb test jig?
Sent from my GT-S5830 using Tapatalk

isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution, I know several cases where people destroyed their Ace this way.
Why do people even bother to pamper with their phones when they have no clue...

Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App

isnwinyetra said:
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Did it working???

Thanq... Thanq...
works fine for me.. great job.

what is the password on .rar files?

korbin3103 said:
what is the password on .rar files?
Click to expand...
Click to collapse
samfirmware.com

My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???

big thanks dude, this small help, really a big help

davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
How did that happen? Did you try to install Clockworkmod recovery?

davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN

forall.sri said:
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
Click to expand...
Click to collapse
Firstly close the KIES. If closed and Still nothing, try to change the connected PC USB port. Hope it helps!
CHEERS!

Hello everyone I have the Galaxy ace brick and download mode but does not exit by pressing the volume up + power + home connects to the PC but remains in connection with odin you can 'do something or should I send him to assist with
or tried to do a backup with Rom manager and is' off my rom 2.3.4 root
I remain blocked setup connection
Tanks

did u try to remove battery ?
if not try remove and enter download mode again, this should help u .

yes remove the battery and put it as a guide, I will connect if I press the volume up
tomorrow the port to help center
Thank you

Related

[Q] Bricked Vibrant and a new issue at &t logo screen on vibrant

Dear all,
i hope you can solve my problem,
when i start my phone, it gives at&t logo screen, this is because i have unfortunately used captivate stock file, and with that i have also lost my 3 button combo.
i want to remove at&t logo and want to get my original vibrant startup screen, and also i want my 3 button combo back to get into restore and download mode.
I m currently using Clockwordmod kernel and Cyanogen mod 7 ROM.
Thanks
please help me....
I would suggest downloading the vibrant AIO toolbox and using Odin to get back to stock. To enter download mode I have always powered down the phone pull the battery and plug the phone into comp. Then while holding both volume down and up insert the battery. Should go rite to download mode. Hope this helps
Sent from my SGH-T959 using xda premium
i have tried this as well,,,it doesnt get into the download mode like this... i went down to the stock but the at&t logo is still there ...and it doesnot fixes up 3 button combo...
You need a usb jig to force it into download mode. You can make one yourself if you're handy. Ive had similar problems with ported roms and incorrect button mapping. The jig works every time.
i have ordered a jig for myself ...but how to remove that at&t logo ? my phone is from T-mobile ....
Boot screens come with your rom and/or kernel. Once you flash a rom for the vibrant it should have the correct boot images.
where can i get the stock kernel for vibrant ? please help?
You need to flash Vibrant stock bootloaders via ODIN.
VIBRANT STOCK (FROYO) BOOTLOADER DOWNLOAD LINK
- DROPBOX Download Link
- Mediafire Download Link
ODIN Guide
Please follow this step by step, else I won't be responsible for any DAMAGE.
1. Enter Download mode on your phone.
2. Open ODIN on your computer.
3. Plug in USB and check if ODIN recognizes the phone.
4. Remove all ticks from ODIN, except PDA.
5. Select PDA and browse to the bootloader TAR package file you wish to flash.
6. Click on Flash.
7. If ODIN says PASS, long press power for 10 seconds and it'll reboot, else, repeat 2-6 again...
pillowmissile said:
Boot screens come with your rom and/or kernel. Once you flash a rom for the vibrant it should have the correct boot images.
Click to expand...
Click to collapse
Bootloaders too I believe.
Download link not working....please upload again
VIBRANT STOCK (FROYO) BOOTLOADER DOWNLOAD LINK
- MultiUpload Download Link
- Mediafire Download Link
MD5 Sum - 754ecbd8e76d4f81bec49240031f3262
will this boot loader remove at&t logo and give me back the vibrant startup logo?
will it fix the 3 button combo as well?
please help
khatriraza said:
will this boot loader remove at&t logo and give me back the vibrant startup logo?
will it fix the 3 button combo as well?
please help
Click to expand...
Click to collapse
Yes, it'll fix both.
theexel said:
Yes, it'll fix both.
Click to expand...
Click to collapse
But i have to wait till i receive by USB jig ..because without it i cannot get into download mode....my 3 button combo is not working and i do not have any option in MIUI to restart in download mode...it does say recovery mode but no download mode option ....
khatriraza said:
But i have to wait till i receive by USB jig ..because without it i cannot get into download mode....my 3 button combo is not working and i do not have any option in MIUI to restart in download mode...it does say recovery mode but no download mode option ....
Click to expand...
Click to collapse
Try downloading Quickboot from the market or something.
No app is able to take me to download mode.. i have tried it many times...
khatriraza said:
No app is able to take me to download mode.. i have tried it many times...
Click to expand...
Click to collapse
What about using adb?
Using this command: adb reboot download
khatriraza said:
But i have to wait till i receive by USB jig ..because without it i cannot get into download mode....my 3 button combo is not working and i do not have any option in MIUI to restart in download mode...it does say recovery mode but no download mode option ....
Click to expand...
Click to collapse
enter odin, take out your battery,connect the usb to the computer and to the phone, press both vol up and down buttons,reinstall the battery.A yellow COM should pop up in odin.Flash the pit files and you should be good to go!
(if both vol buttons dont give you a COM on odin try vol up then the process if not vol down and the process)
have u looked up the captivate button mapping. maybe you can get into download that way

[Q] somebody help me...

Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
weylls said:
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
Click to expand...
Click to collapse
are you trying to root your phone
yeah I'm trying to root a device .. but now it has not work and a black screen .. I tried to on but does not work ..
Try and get into download mode. Make sure the phone is switched off (pull the battery out for a minute then put it back in). Then press the volume down & home buttons & keep holding them down. At the same time press the power button until you boot into download mode.
If you can get into download mode, connect your phone to PC via USB & start Odin. Check Windoze Task Manager & make sure Kies isn't open. If it is, close Kies & it's associated processes. Now, if Odin recognises your phone & you have COM highlighted in yellow, you should be able to fix it.
At this stage, download stock firmware from Samfirmware if you haven't already. From there, flash the stock firmware in Odin and follow whatever instructions Samfirmware have for flashing firmware downloaded from their site (important).
Now...If you can't get into download mode, you can try a jig. If the jig doesn't work, you'll either need to get a JTAG repair done, or send it in to Samsung/your carrier for repair.
weylls said:
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
Click to expand...
Click to collapse
Ok. What file/s were you using in Odin and what did you put where?
I think I've heard of similar things happen before when flashing galaxy s firmware on an S2.
As MB said, your only chance is to get download mode working before having to send it off.
Sent from my GT-I9100T
thanks 4 advices..
I have sent to the repairer .. he said I was burning device ic .. is it reasonable?
That does not make sense .
Burning device what with blowtorch .
jje
thanks
on the night of the incident I have been waiting a long time to flash, and the triangle symbol appears by that I have been pulling out the usb ,after it displayed the symbol + triangle + pc device .. after that I can return to the download mode .. but after the inclusion of Odin file, device keep does not work, what the causes and what is his solution? thanks 4 help
weylls said:
,after it displayed the symbol + triangle + pc device ..
Click to expand...
Click to collapse
This is a forced download mode. Essentially means you have to flash a working firmware before the phone will boot.
huhhhh...
I think to send the device to Samsung, is he able to find damage caused by my error?
MistahBungle said:
Try and get into download mode. Make sure the phone is switched off (pull the battery out for a minute then put it back in). Then press the volume down & home buttons & keep holding them down. At the same time press the power button until you boot into download mode.
If you can get into download mode, connect your phone to PC via USB & start Odin. Check Windoze Task Manager & make sure Kies isn't open. If it is, close Kies & it's associated processes. Now, if Odin recognises your phone & you have COM highlighted in yellow, you should be able to fix it.
At this stage, download stock firmware from Samfirmware if you haven't already. From there, flash the stock firmware in Odin and follow whatever instructions Samfirmware have for flashing firmware downloaded from their site (important).
Now...If you can't get into download mode, you can try a jig. If the jig doesn't work, you'll either need to get a JTAG repair done, or send it in to Samsung/your carrier for repair.
Click to expand...
Click to collapse
I have tried but failed ...

Pls help I m in panic

I was trying to update-upgrade my S2 via Kies (everything up to date) to ICS, it got stuck at 0% an error message came up said pull out battery and connect again. Did it but nothing. A yellow triangle with black ! inbetween of a phone and a PC only appears. Tried Hard reset but nothing. can't connect to kies, can;t do anything...
Tried to look if there were is another thread like this but couldnt find.
Im a newbie in Android and as you can see I am in PANIC
any help appreciated.
is brick.you need jig usb to put in download mode for flash.
Inviato dal mio GT-I9100 usando Tapatalk
Thx for the quick reply. But how do I do-find it???
Did I do sth wrong? My fault?
You can buy it at ebay.
yeah looked it up. any other quicker solution isnt there?
volakas said:
Thx for the quick reply. But how do I do-find it???
Did I do sth wrong? My fault?
Click to expand...
Click to collapse
I would say first try getting into download mode(by pressing volume up & the power button simultaneously). After that, connect your phone to your PC,run "Odin 1.85"(just google that sentence, you will get it), after that use odin to flash a stock samsung ROM to your phone.
download this stock ROM to be used with odin :
http://skywanker.net/download/downl...9100_XEO_I9100XWLP8_I9100OXALPS_I9100XXLPS.7z
the exact details on how to flash the link I gave above to your phone is on this link:
http://forum.xda-developers.com/showthread.php?t=1075278
Good luck!!
Tried Vol up and power button but nth happend. Still Yellow triangle and black question mark....
For download mode its volume down home and power key.Try this if it goes in to download mode then follow the rest of the steps from the above post
volakas said:
Tried Vol up and power button but nth happend. Still Yellow triangle and black question mark....
Click to expand...
Click to collapse
You need to press the Home button as well.
I'd remove batteries, wait for at least 5 s. Then try entering Download mode with
(Vol Down Home, Power)
If it still won't work then you'd need to get a USB jig as noted in previous posts.
And no it is not your fault, KIES is not a very good piece of software.
Elythor said:
You need to press the Home button as well.
I'd remove batteries, wait for at least 5 s. Then try entering Download mode with
(Vol Down Home, Power)
If it still won't work then you'd need to get a USB jig as noted in previous posts.
And no it is not your fault, KIES is not a very good piece of software.
Click to expand...
Click to collapse
Tried that as well but nothing..... will go the store I bought it to see if they want any fees or else I wil order the jig and wait 3 weeks for it to arrive
volakas said:
A yellow triangle with black ! inbetween of a phone and a PC only appears.
Click to expand...
Click to collapse
Are you still getting this screen? This is a forced download mode. You can try an Odin flash from here.
apparently you are new to this so..... here it goes
1: first check you got i9100 not i9100G
2: kies told you to remove and reconnect blaa blaa so it can restore the error. if you cant manage to fix it, than easy method is like post above said. use odin.
3: read about how to use odin, close kies, download stock ROM (checkfus / sammobile ) and flash, it will be fixed.
4: no need for jig at the moment.
if ur in download mode jus use odin an c if it recognizes,yes means flash up....by the way kies is safe
Well i think i ve got I9100G, can i still use Odin?????
YES,
though search threads in this section :http://forum.xda-developers.com/forumdisplay.php?f=1550
cant you make sure or still think it is "G"
Yes it is MODEL:GT-I9100G
volakas said:
Yes it is MODEL:GT-I9100G
Click to expand...
Click to collapse
G section of the forum .
i9100 firmware will brick a G model .
jje
Well i opened ODIN put an I9100G Rom as PDA and pressed start but after half an hour it is still <ID:0/008> SetupConnection..
It's in forced download mode, it should still be coming up "COM:x" in ODIN right? You should be able to flash a recovery package from there. It should take 5 minutes at the most, not 30.
where did you get ROM from...what type of file????

[Q] Bricked and Odin wont install

Hi,
So I'm on the Samsung Galaxy S II I9100, I'm not sure of what has been done before on the phone, but here is the situation.
Boot => yellow triangle & no os boot.
I'm a newbe, but I tried to follow guides to fix my problem, without success.
Check the attached screenshot of Odin.
All tasks seems to be completed but nothing is done, and the phone does not move from the downloading mode screen.
Hope someone will be able to help me or link me a solution !
Thanks !
EDIT: OOps, pls move me to the Q&A....
why there is 2 com in yellow it most be only one try to reboot the device(ur mobile) then try again but u have to remove usb cable from device before reboot
then flash again and it should work
yahyoh said:
why there is 2 com in yellow it most be only one try to reboot the device(ur mobile) then try again but u have to remove usb cable from device before reboot
then flash again and it should work
Click to expand...
Click to collapse
Well, after rebooting !everything!, it seems that now it works...
Thats probably sorcery !
Maybe not, thanks !
1. Download a full stock Rom for Odin.
2. Boot the phone into download mode (volume down + power + home).
3. Fire up Odin and place the Rom files as instructed.
4. Connect phone to PC.
5. After Odin shows it recognizes the phone, press start.
arthox said:
Well, after rebooting !everything!, it seems that now it works...
Thats probably sorcery !
Maybe not, thanks !
Click to expand...
Click to collapse
welcome bro no its not sorcery lol its because the first time u connect it will installing the phone driver and it make this problem with odin happened to me before ^^

GT-S5830i not booting - after SAMSUNG logo

Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
I had a similar issue(more than once) and in my case I split the myFirmware file into it's 3 individual parts using Cygwin and SplitFUS2 and flashed from that with Odin 1.85. You could do this with FW file S5830IJPLK1_S5830IOJPLI1_XSG. I also used the pit file(cooperve_0623.pit), but I'm not sure if it was required but point is, it worked.
I also got out of trouble with the use of a backup which although not solid did get me out of trouble. The backup would not restore so I loaded ClockWorkMod recovery and in advanced restore, restored the system folder from my backup, this worked and got me into the phone. However you may not have a backup.
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
[email protected] said:
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
Click to expand...
Click to collapse
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
shijopj2012 said:
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
Click to expand...
Click to collapse
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
shijopj2012 said:
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
Click to expand...
Click to collapse
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Click to expand...
Click to collapse
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
Flash s5830i cwm.
Go to this link for cwm.
And then clear data cach and dalvik cache..and flash any stock based custom rom..
http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
If this solution doesn't work, then your only solution is USB Jig.
shijopj2012 said:
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Click to expand...
Click to collapse
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
First. u should download CMW for s5830i ,.copy it to your sd card.Then download a custom rom and flash it..
If u had made a backup before doing this u can restore it.In my case i restore it .if u encounter any error again inform me
amolgosavi said:
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
shijopj2012 said:
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
Click to expand...
Click to collapse
Whenever I flash back my stock rom using odin on my Galaxy Ace, it gives me a bootloop just like yours. The simple solution for this is go to recovery mod and do a "Wipe data/ factory reset". That's it now reboot. It should work fine. Please try this. Hope I Helped
use Odin3 v1.84 for Samsung Galaxy Ace-i instead
Its working........great.........
If u want to flash then use "Odin3.v3.07.Cooperve" and also put "cooperve_0623.pit" in pit tab...........
why odin3 v3.07 can't detect my phone, my phone displays odin mode and at the bottom donloading do not turn off target, nothing happens..

Categories

Resources