Dear all,
i hope you can solve my problem,
when i start my phone, it gives at&t logo screen, this is because i have unfortunately used captivate stock file, and with that i have also lost my 3 button combo.
i want to remove at&t logo and want to get my original vibrant startup screen, and also i want my 3 button combo back to get into restore and download mode.
I m currently using Clockwordmod kernel and Cyanogen mod 7 ROM.
Thanks
please help me....
I would suggest downloading the vibrant AIO toolbox and using Odin to get back to stock. To enter download mode I have always powered down the phone pull the battery and plug the phone into comp. Then while holding both volume down and up insert the battery. Should go rite to download mode. Hope this helps
Sent from my SGH-T959 using xda premium
i have tried this as well,,,it doesnt get into the download mode like this... i went down to the stock but the at&t logo is still there ...and it doesnot fixes up 3 button combo...
You need a usb jig to force it into download mode. You can make one yourself if you're handy. Ive had similar problems with ported roms and incorrect button mapping. The jig works every time.
i have ordered a jig for myself ...but how to remove that at&t logo ? my phone is from T-mobile ....
Boot screens come with your rom and/or kernel. Once you flash a rom for the vibrant it should have the correct boot images.
where can i get the stock kernel for vibrant ? please help?
You need to flash Vibrant stock bootloaders via ODIN.
VIBRANT STOCK (FROYO) BOOTLOADER DOWNLOAD LINK
- DROPBOX Download Link
- Mediafire Download Link
ODIN Guide
Please follow this step by step, else I won't be responsible for any DAMAGE.
1. Enter Download mode on your phone.
2. Open ODIN on your computer.
3. Plug in USB and check if ODIN recognizes the phone.
4. Remove all ticks from ODIN, except PDA.
5. Select PDA and browse to the bootloader TAR package file you wish to flash.
6. Click on Flash.
7. If ODIN says PASS, long press power for 10 seconds and it'll reboot, else, repeat 2-6 again...
pillowmissile said:
Boot screens come with your rom and/or kernel. Once you flash a rom for the vibrant it should have the correct boot images.
Click to expand...
Click to collapse
Bootloaders too I believe.
Download link not working....please upload again
VIBRANT STOCK (FROYO) BOOTLOADER DOWNLOAD LINK
- MultiUpload Download Link
- Mediafire Download Link
MD5 Sum - 754ecbd8e76d4f81bec49240031f3262
will this boot loader remove at&t logo and give me back the vibrant startup logo?
will it fix the 3 button combo as well?
please help
khatriraza said:
will this boot loader remove at&t logo and give me back the vibrant startup logo?
will it fix the 3 button combo as well?
please help
Click to expand...
Click to collapse
Yes, it'll fix both.
theexel said:
Yes, it'll fix both.
Click to expand...
Click to collapse
But i have to wait till i receive by USB jig ..because without it i cannot get into download mode....my 3 button combo is not working and i do not have any option in MIUI to restart in download mode...it does say recovery mode but no download mode option ....
khatriraza said:
But i have to wait till i receive by USB jig ..because without it i cannot get into download mode....my 3 button combo is not working and i do not have any option in MIUI to restart in download mode...it does say recovery mode but no download mode option ....
Click to expand...
Click to collapse
Try downloading Quickboot from the market or something.
No app is able to take me to download mode.. i have tried it many times...
khatriraza said:
No app is able to take me to download mode.. i have tried it many times...
Click to expand...
Click to collapse
What about using adb?
Using this command: adb reboot download
khatriraza said:
But i have to wait till i receive by USB jig ..because without it i cannot get into download mode....my 3 button combo is not working and i do not have any option in MIUI to restart in download mode...it does say recovery mode but no download mode option ....
Click to expand...
Click to collapse
enter odin, take out your battery,connect the usb to the computer and to the phone, press both vol up and down buttons,reinstall the battery.A yellow COM should pop up in odin.Flash the pit files and you should be good to go!
(if both vol buttons dont give you a COM on odin try vol up then the process if not vol down and the process)
have u looked up the captivate button mapping. maybe you can get into download that way
Related
Hello guys. My phone don't turn on when i press power button, VOL UP/DOWN buttons don't work also.
1. I flashed my vibrant with Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10*. Don't know why after what i can't access download mode by 3 buttons. I had Android System Recovery <3e>.
2. After that i try go to download mode with battery out method, and it was fine. Next step was downgrade firmware to T959UVJE8-factory-final-MS_Guru.
3. After that i had "Android System Recovery <2e>" message
4. I tried to reinstall back Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10* but something happend and Odin software Failed and i had "picture phone ! pc".
5. I tried both methods to go to download mode and after half an hour method with battery out and pushing vol up/down buttons accepted.
6. Then i tried to reinstall original firmware one more time. And it was fine. You can see screenshot in attachment.
7. But my phone after flashing turns off for rebooting and died.
When i trying to connect it with pc or charger nothing happens. Buttons don't work. Nothing on screen. Battery out not helped.
What to do??????
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
mbrockway said:
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
Click to expand...
Click to collapse
I think mbrock meant pit, not sit.
And yes, you only need the .pit and the .tar files.
~SB
mbrockway said:
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
Click to expand...
Click to collapse
Yes i tried this method. It doesn't work for me. I done all steps exactly how wrote MS_Guru in "Reflash Your Vibrant To Original Firmware"
bafxyz said:
Yes i try this method. It doesn't work for me. I do all steps exactly how wrote MS_Guru in "Reflash Your Vibrant To Original Firmware"
Click to expand...
Click to collapse
have you tried eugene's froyo that doesn't brick then go back to stock?
when going back to stock you only use the pda and the pit. that seems to be you problem.
Sent from my SGH-T959 using XDA App
iynfynity said:
have you tried eugene's froyo that doesn't brick then go back to stock?
when going back to stock you only use the pda and the pit. that seems to be you problem.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I used this one:
Eugene_SD+2E_JK2_Froyo Download >Vibrant_Full_Froydin_AND_2E_Recovery_+SD_Fixed
Unzip Download
&
Load s1_odin_20100512.pit into .pit at top of ODIN
&
Load Eugene_2E_JK2_Froyo.tar.md5 into PDA of ODIN
P.S. Tommorow i'll try to modify USB cable with resistors. Hope this will help me.
bafxyz said:
Hello guys. My phone don't turn on when i press power button, VOL UP/DOWN buttons don't work also.
1. I flashed my vibrant with Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10*. Don't know why after what i can't access download mode by 3 buttons. I had Android System Recovery <3e>.
2. After that i try go to download mode with battery out method, and it was fine. Next step was downgrade firmware to T959UVJE8-factory-final-MS_Guru.
3. After that i had "Android System Recovery <2e>" message
4. I tried to reinstall back Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10* but something happend and Odin software Failed and i had "picture phone ! pc".
5. I tried both methods to go to download mode and after half an hour method with battery out and pushing vol up/down buttons accepted.
6. Then i tried to reinstall original firmware one more time. And it was fine. You can see screenshot in attachment.
7. But my phone after flashing turns off for rebooting and died.
When i trying to connect it with pc or charger nothing happens. Buttons don't work. Nothing on screen. Battery out not helped.
What to do??????
Click to expand...
Click to collapse
was your battery low when your flashing ?
djkdawg said:
was your battery low when your flashing ?
Click to expand...
Click to collapse
It was almost full.
Trying cable method with resistors. Not working
I've got exactly the same problem
After trying to flash my phone with odin it went black and that's it, nothing can wait it up (
Email me [email protected]
The best phone in the world
Maybe this info will be helpfull. In this situation with dead Samsung Galaxy, Vibrant, Captivate only one ressurection. You need to open your mobile phone and reflash boot loader using RIFF Box JTAG which you can find only in service center. And you need to save your IMEI information which you must read from this address 0х80000 and this lenth 0хA80000. Thats all.
i tried that method you decscribed , now my phone is in MOde that say "power reset or unknown upload mode" any clue about how to get into download mode from this. odib detects my phone in this mode but i don't think it will load the software since it is not in download mode.
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen after flashing froyo heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
Get the roms from sammobile site.
Be sure that you download de correct firmware for your device version.
Good mannnnnn ֱ
SuperMini said:
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it shoul come back to life.
Click to expand...
Click to collapse
Don't work for me...
you saved my day
I was about to send my phone to support centre!
Cool, brought back to life.
I wish we had a thread listing all these tricks.
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution for that. Did you try making usb test jig?
Sent from my GT-S5830 using Tapatalk
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution, I know several cases where people destroyed their Ace this way.
Why do people even bother to pamper with their phones when they have no clue...
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
isnwinyetra said:
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Did it working???
Thanq... Thanq...
works fine for me.. great job.
what is the password on .rar files?
korbin3103 said:
what is the password on .rar files?
Click to expand...
Click to collapse
samfirmware.com
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
big thanks dude, this small help, really a big help
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
How did that happen? Did you try to install Clockworkmod recovery?
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
forall.sri said:
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
Click to expand...
Click to collapse
Firstly close the KIES. If closed and Still nothing, try to change the connected PC USB port. Hope it helps!
CHEERS!
Hello everyone I have the Galaxy ace brick and download mode but does not exit by pressing the volume up + power + home connects to the PC but remains in connection with odin you can 'do something or should I send him to assist with
or tried to do a backup with Rom manager and is' off my rom 2.3.4 root
I remain blocked setup connection
Tanks
did u try to remove battery ?
if not try remove and enter download mode again, this should help u .
yes remove the battery and put it as a guide, I will connect if I press the volume up
tomorrow the port to help center
Thank you
Phone charged up overnight, and after half an hour of listening to music, I noticed the battery had fallen to around 30%. I then rebooted the phone, but it did not boot up. Cannot seem to enter any recovery/download mode.
Rooted running the Omega ROM. Haven't done any modifications to it for a good couple of weeks. Any chance of salvation?
maybe the battery gone bad? did u try with other battery?
Maybe, but I forgot to mention i somehow entered emergency recovery mode earlier (once) which would suggest its not? How do you enter that mode?
i've heard of that emergency recovery mode, but never actually seen it or know exactly howto trigger it. try vol up+vol down+home+power
Thanks that worked.
Now in 'emergency dload mode (arm9 mode)'
Where do I go from here?
so hows that recovery looks like? got any menu selection like normal recovery such as wipe data etc? if got, try to wipe data.
Nope not like a recovery mode. All it is is the Samsung logo with the 'emergency dload mode' text...
frankly we all here doesnt know exactly what the purpose of that emergency recovery mode.
try to connect your phone with odin and see its detected. maybe u can flash stock rom from it.
if it doesnt work either, u can try to force the device into normal download mode and flash with odin. first take off the battery, wait for around 5 seconds, hold the three button combination for download mode and while u still hold those three buttons, reinsert the battery. it should go into download mode and u can flash stock rom via odin.
Thanks for help. Will give it a go, and let you know the results....
If it treat it like a normal download mode, am I right in thinking I just follow the normal procedure for flashing via ODIN?
Ie, follow this tutorial: http://acetips.wordpress.com/2011/09/28/upgrade-ace-odin/
MrKillers66 said:
If it treat it like a normal download mode, am I right in thinking I just follow the normal procedure for flashing via ODIN?
Ie, follow this tutorial: http://acetips.wordpress.com/2011/09/28/upgrade-ace-odin/
Click to expand...
Click to collapse
yes.
freakin' xda wont allow short post
thanks.
managed to get it to display yellow 'downloading' text. Can't find a link for drivers though? Think its them I'm missing as ODIN won't detect it...
MrKillers66 said:
thanks.
managed to get it to display yellow 'downloading' text. Can't find a link for drivers though? Think its them I'm missing as ODIN won't detect it...
Click to expand...
Click to collapse
doload samsung kies and install
herpderp © aint got money to pay to my fish
MrKillers66 said:
thanks.
managed to get it to display yellow 'downloading' text. Can't find a link for drivers though? Think its them I'm missing as ODIN won't detect it...
Click to expand...
Click to collapse
http://hotfile.com/dl/141204140/576b45c/SAMSUNG_Mobile_Phones_USB_Driver.rar.html
if its asking for pass, its
Code:
samfirmware.com
Does anyone knows where to buy a motherboard for gt n7000
Got drives and firmware downloaded. But ODIN won't recognise my phone? Any suggestions?
Odin won't flash phones that in Emergency download mode.
Have you tried normal download mode?
P.S: Emergency Dload mode = Vol Up + Vol Down + Menu + Power
Nomal dload mode: Vol Down + menu + power
Sent from my GT-S5830 using Tapatalk
Thanks for everyones help.
Managed to get it to the 'downloading' text, where I eventually managed to flash a stock ROM via ODIN, so I'm now unrooted.
Problem still remains where it won't boot up without being plugged into a power source, so taking it back tomorrow. I believe the battery somehow died and may have taken something else down with it...
Well, my phone cant enter in this modes, but the problem its that also cant enter to the system, i can only see the logo of samsung and then the screen turn off, I dont know what to do, because I cant use the odin because I cant enter in download mode, I dont know if there is a button to hard reset the phone. I was trying to put a rom of ics but i believe that the firmware was wrong for my phone. please help me.
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
How did you try to get into download and recovery. Be as specific as possible
JoseDavid said:
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
Click to expand...
Click to collapse
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
122ninjas said:
How did you try to get into download and recovery. Be as specific as possible
Click to expand...
Click to collapse
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
JoseDavid said:
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
Click to expand...
Click to collapse
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
creepyncrawly said:
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
Click to expand...
Click to collapse
I had a rom of supernexus for jelly bean, this rom run very fine, but i was trying to put the modem of one rom the ics, and in this moment the problems started, but i could enter in download mode and try to flash with a rom of ics, the topic its in spanish, and I couldn't read well because the rom its for s2, they don't specified the model sgh i777 :S, now I downloaded the rom what i need but i can enter in the download mode, I cant put the link because I'm new here
creepyncrawly said:
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
Click to expand...
Click to collapse
I'm doing the try right now without pressing the power button and then my phone screen display "Forcerd Upload by key pressing"
that help??
JoseDavid said:
I cant put the link because I'm new here
Click to expand...
Click to collapse
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
creepyncrawly said:
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
Click to expand...
Click to collapse
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
JoseDavid said:
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
Click to expand...
Click to collapse
Looks like he loaded bootloaders.
122ninjas said:
Looks like he loaded bootloaders.
Click to expand...
Click to collapse
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
JoseDavid said:
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
Click to expand...
Click to collapse
Nobody knows what can I do in that moment?
I put my i777 on download mode by removing the battery and putting it back. Hold the volume button down and connect the USB charger wait for the buttons to flash and disconnect the charger while holding the volume down button. If that doesn't work nothing will.
Sent from my SGH-I777 using Tapatalk 2
JoseDavid said:
Nobody knows what can I do in that moment?
Click to expand...
Click to collapse
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
creepyncrawly said:
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
Click to expand...
Click to collapse
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
JoseDavid said:
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
Click to expand...
Click to collapse
Glad u got it fixed! In the future only download roms from this Site and never flash bootloaders.
Sent from Team Pirate Headquarters
help please
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
jck203 said:
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
Click to expand...
Click to collapse
can you interrupt the bootloop by trying to get to recovery (holding VOL UP + VOL DOWN + POWER until recovery menu appears) and then go to backup-restore and restore a backup? That's what I would try. IF that does not work, I would reinstall the drivers for andoid on your pc --even though you had them working (presumably) once before. After reinstalling the drivers then odin should (may!) see the phone and work.
good luck
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
I had a similar issue(more than once) and in my case I split the myFirmware file into it's 3 individual parts using Cygwin and SplitFUS2 and flashed from that with Odin 1.85. You could do this with FW file S5830IJPLK1_S5830IOJPLI1_XSG. I also used the pit file(cooperve_0623.pit), but I'm not sure if it was required but point is, it worked.
I also got out of trouble with the use of a backup which although not solid did get me out of trouble. The backup would not restore so I loaded ClockWorkMod recovery and in advanced restore, restored the system folder from my backup, this worked and got me into the phone. However you may not have a backup.
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
[email protected] said:
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
Click to expand...
Click to collapse
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
shijopj2012 said:
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
Click to expand...
Click to collapse
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
shijopj2012 said:
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
Click to expand...
Click to collapse
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Click to expand...
Click to collapse
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
Flash s5830i cwm.
Go to this link for cwm.
And then clear data cach and dalvik cache..and flash any stock based custom rom..
http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
If this solution doesn't work, then your only solution is USB Jig.
shijopj2012 said:
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Click to expand...
Click to collapse
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
First. u should download CMW for s5830i ,.copy it to your sd card.Then download a custom rom and flash it..
If u had made a backup before doing this u can restore it.In my case i restore it .if u encounter any error again inform me
amolgosavi said:
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
shijopj2012 said:
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
Click to expand...
Click to collapse
Whenever I flash back my stock rom using odin on my Galaxy Ace, it gives me a bootloop just like yours. The simple solution for this is go to recovery mod and do a "Wipe data/ factory reset". That's it now reboot. It should work fine. Please try this. Hope I Helped
use Odin3 v1.84 for Samsung Galaxy Ace-i instead
Its working........great.........
If u want to flash then use "Odin3.v3.07.Cooperve" and also put "cooperve_0623.pit" in pit tab...........
why odin3 v3.07 can't detect my phone, my phone displays odin mode and at the bottom donloading do not turn off target, nothing happens..