Related
I want to share the versions of the Market and various Gapps that work for me on Sam's HC EMMC v4.0, 2nd ed. build {Huge props to him, deeper-blue, and others who got HC working on the NC. Without their heroic efforts, I'd be working 4 jobs right now trying to save up to buy a Xoom}
This script is the first one I run after doing a fresh build of HC EMMC, but you should also be able to do it on a stale version of HC as well.
Maps is version 5.0
While I am confident that these files will work for you as well, please remember, individual results may vary---use at your own discretion.
NOTE: The 'GoogleServicesFramework.apk' file in the attached .zip will remove the blue wi-fi icon from Sam's initial build. If you prefer the blue icon over a working Market (My Apps), then DO NOT proceed with the installation!
That being said, please do the following before trudging ahead:
+ Perform a full backup using your bootable CWR SD card [see samuelhalff's thread for instructions on this: http://forum.xda-developers.com/showthread.php?t=947071]
+ Backup each of the original files on your NC that will be replaced by the script
+ See #1 & #2 above...you've been warned
Instructions for Installation:
Extract the files contained within the attached .zip into the same directory as your ADB directory (where your 'adb.exe' file lives). Mine was located here on my computer: C:\android-sdk-windows\platform-tools
Connect your NC to your computer, ensuring ADB is working properly ahead of time
Double-click on the file 'HoneyGAppInstall.cmd' and the script to install the new apps will run
The script will reboot your NC upon completion
Once your NC comes backup from the reboot, you can then login to the Market, select "My Apps" and they should show up right away.
I have also attached the 'build.prop' file I use. This modified file allows me to see tablet apps (NY Times Tablet, More Good News Tablet) and also I can see/download/install both Angry Birds games.
NOTE: The ro.sf.lcd_density is set to 140 in my file. This is not friendly to Zeam and needs to be set to at least 150 for that launcher to work without Force Closing in Portrait mode.
Good luck and let me know if any issues.
EDIT: For those running a build that is not new and already has the original Market setup, would be best to do the following steps after running the Gapps script:
1.) Settings > Manage Applications > All > Market: Clear Cache then Force Stop -- DO NOT Clear Data2.) Settings > Manage Applications > All > Google Services Framework: Clear Data3.) Reboot
~ Razir
Would it be possible to flash the market zip through recovery? Looks like it would work in theory.
I can see all the installed apps on My Apps. Thanks for these files. But I have one problem. My Nook no longer shows up on market.android.com. Anyone else have this problem?
Is Youtube working?
JaysFreaky said:
Is Youtube working?
Click to expand...
Click to collapse
HQ videos don't work. If you disable HQ it works.
Vasanth said:
I can see all the installed apps on My Apps. Thanks for these files. But I have one problem. My Nook no longer shows up on market.android.com. Anyone else have this problem?
Click to expand...
Click to collapse
I don't use that site much, but I did just check it out of curiosity.
I verified it was working by going into: My Market Account > Settings tab. I can see "LogicPDZoom2" with last access of today's date.
bdcrim said:
Would it be possible to flash the market zip through recovery? Looks like it would work in theory.
Click to expand...
Click to collapse
Not being a dev, I don't know how to compile the files I attached and make them flashable.
However, I can tell you that I do have a black-themed Market by Darkslide for my DroidX that is flashable via CWR, but sadly, it did not work for me. I tried it by booting to the CWR SD card. Would have been nice to have the black-themed version.
I also have a flashable version of Zeam, but again, did not work for me.
Now, I have not tried it by going into CWR using Sam's method with his built-in utility. This is because I have not really been able to get that to work 100% of the time and also because it is just so easy to get to CWR via the bootable SD card that I have not really messed with it too much.
I can post the black-themed Market if someone smarter than me wants to take a look at it...might prove useful. I am just not sure if a DX file can be used on the NC
Just let me know and maybe we can figure it out together.
Vasanth said:
HQ videos don't work. If you disable HQ it works.
Click to expand...
Click to collapse
And you have to be pretty fast at disabling that little "HQ" icon in the top-right corner of the screen. From my experience, has to be almost instantaneous by the time it appears on the screen or the video won't load.
360Razir said:
I don't use that site much, but I did just check it out of curiosity.
I verified it was working by going into: My Market Account > Settings tab. I can see "LogicPDZoom2" with last access of today's date.
Click to expand...
Click to collapse
Thanks for checking. I did mess around with the build.prop you provided. I think I messed something up. I will use the file you provided without any changes.
Thanks.
Not being dev minded, I don't know how much help I would be. I was able to extract the apks from the zip file and move them with root explorer, changed permissions and it appears to be holding. Have rebooted twice and still good. Your script in the zip file would not work with cwr since it is windows based, I think. I don't know if the apks would install in recovery without a script, seems like it would not. Anyway, thanks for putting this together. Market works with the apks and the build. prop seems to have helped as well. Thanks again.
360Razir said:
Not being a dev, I don't know how to compile the files I attached and make them flashable.
However, I can tell you that I do have a black-themed Market by Darkslide for my DroidX that is flashable via CWR, but sadly, it did not work for me. I tried it by booting to the CWR SD card. Would have been nice to have the black-themed version.
I also have a flashable version of Zeam, but again, did not work for me.
Now, I have not tried it by going into CWR using Sam's method with his built-in utility. This is because I have not really been able to get that to work 100% of the time and also because it is just so easy to get to CWR via the bootable SD card that I have not really messed with it too much.
I can post the black-themed Market if someone smarter than me wants to take a look at it...might prove useful. I am just not sure if a DX file can be used on the NC
Just let me know and maybe we can figure it out together.
Click to expand...
Click to collapse
bdcrim said:
Not being dev minded, I don't know how much help I would be. I was able to extract the apks from the zip file and move them with root explorer, changed permissions and it appears to be holding. Have rebooted twice and still good. Your script in the zip file would not work with cwr since it is windows based, I think. I don't know if the apks would install in recovery without a script, seems like it would not. Anyway, thanks for putting this together. Market works with the apks and the build. prop seems to have helped as well. Thanks again.
Click to expand...
Click to collapse
You are most welcome and yes, the .zip is not flashable for CWR. XDA will only allow for certain types of files to be uploaded and .zip is one of them, so easier for me to go that route.
Files in the .zip are meant to be extracted into the folder where ADB.exe exists in order for the script to work correctly. As stated in the OP, I have only tested this on a Win7 box, as that is the only platform I have access to at the moment.
Root Explorer will also work, as you already know. So, for those who want to go that route, it is certainly an option. Glad things are working well for you at this point. Thanks for your feedback!
I'm just checking. These are the Android 3.0 gapps from the XOOM, not the 2.3 gapps? (Sorry I'm a little tired and don't have the emmc version installed, I run the SD card version, so I can't test ATM)
kdb424 said:
I'm just checking. These are the Android 3.0 gapps from the XOOM, not the 2.3 gapps? (Sorry I'm a little tired and don't have the emmc version installed, I run the SD card version, so I can't test ATM)
Click to expand...
Click to collapse
2.3, not 3.0.
Just transferred all the apps and the build.prop to a stale build of eMMC 2nd (3 days of use) and other than using root explorer followed the instructions to a T. My apps seemed to work but not thinking I updated maps in the market and now it doesnt work. Tried to uninstall updates in market (didnt seem to even finish the process), replace with my original apk, replace with apk from your zip here, clearing cache and data. Nothing seems to bring it back to life. Anyone else have this problem?
P.S. I think the white wifi icon looks nice.
Sent from my LogicPD Zoom2 using Tapatalk
Just used a combination of Root Explorer and ADB (for the chmod) to use your mod and everything is working great. Thanks a ton for posting this!
Only change I had to make was the LCD Density in the build.prop since I want to use Zeam. I tried using the default launcher but it is so laggy, I just can't.
lospulpo said:
Just transferred all the apps and the build.prop to a stale build of eMMC 2nd (3 days of use) and other than using root explorer followed the instructions to a T. My apps seemed to work but not thinking I updated maps in the market and now it doesnt work. Tried to uninstall updates in market (didnt seem to even finish the process), replace with my original apk, replace with apk from your zip here, clearing cache and data. Nothing seems to bring it back to life. Anyone else have this problem?
P.S. I think the white wifi icon looks nice.
Sent from my LogicPD Zoom2 using Tapatalk
Click to expand...
Click to collapse
Did you get your Maps back and working yet? If not, PM me and we can work on it together, offline. And if we can get it to work, we can post the "method to our madness" here in case others have done the same.
911jason said:
Just used a combination of Root Explorer and ADB (for the chmod) to use your mod and everything is working great. Thanks a ton for posting this!
Only change I had to make was the LCD Density in the build.prop since I want to use Zeam. I tried using the default launcher but it is so laggy, I just can't.
Click to expand...
Click to collapse
Glad all is working for you and that is a good point...I will update the OP to let folks know the build.prop has the LCD Density set at 160, which is not Zeam portrait-mode friendly.
Thanks for the feedback!
Okay, just downloaded the new Amazon Appstore and installed Angry Birds Rio (the first Free App of the Day). Force Close... so I tried both 140 and 160 LCD Densities and still no luck. Tried both of the other Angry Birds (original & seasons) and they force close on all three densities as well.
Any thoughts on why you are able to run them but I can't using the same build.prop? The only thing I had changed from your build.prop was the LCD density, but as I said, even changing it back to match your original setting doesn't make Angry Birds work.
Angry Birds and Angry Birds Seasons work for me. I had to move them to the internal memory. I already tried moving Rio to internal memory, however it still FC's. I can get the game to almost start, but when it's time to start shooting, it FC's. I haven't tried changing the LCD density.
Same issue here with Rio. Tried internal and no dice. Doesn't run at all when on SD.
CREDITS TO GabrialDestruir,et al (MN 4.5.6) & Dalingrin (OC kernel)
* All warnings implied and applies.. your Nookie might turn into a Cookie... so use at your own risk!
* I'm NOT a DEV nor is this something special, so get over it
This CWR flashable kernel is ONLY for STOCK Barnes and Noble's Froyo 1.2 update. MiniRooter V2 is based upon GabrialDestruir's MN 4.5.6 & Dalingrin OC kernel for stock Froyo 1.2 release 5/13.
Why should I jump on this bandwagon??
MiniRooter will make you 35% happier... j/k it might make you sadder. Ok, maybe not, but it will save you some headaches. It was made for my own selfish use, but I decided it was time to share.
It is NOT for people who wants FULL Android tablet functionality! Go install CM7, Nookie Froyo, or use the ManualRooter.
The purpose of Mini Rooter is to allow stock BN 1.2 users access to SU, overclock, install third party apps (sideload), and install apps from Amazon app market. It is intended to mainly add and NOT modify any essential NOOK files, thus keeping the BN Nook experience as functional as possible for its intended purpose. However, you can really make it bi-polar and install other stuff too if you want. For a GREAT & free exchange email client w/calendar, find MoxierMail from the Amazon appstore. It is awesome.
The main reason for not modding file systems and installing the google market is to avoid problems I ran into with the MN 4.5.6 install, ie. touch page flips of children's book, BN store not working on purchases, instore access, and other headaches.
NO install issues with Angry Birds from the Amazon app store. When installing, choose "Package Installer"
Essentially, this mod is for newbies and/or tree-hugging hippies and minimalists with a lust for power and a thirst for frozen lemonade. mmm.. frozen lemonade.
What it does?
* Installs SU & busybox (rooting)
* Replaces stock kernel with Dalingrin's OC Kernel (up to 1.2ghz!!)
* Installs these apps:
adbwireless
Amazon Appstore
Button Savior
Calculator
SetCPU - you should donate (its also on the android market)
TouchRecalibrate
Zeam
Nook Color Tools - change settings, install 3rd party apps
Rom Manager - CWR & backups
Youtube - for learning how to dougie
Pick a Flavor:
MiniRooterV2-BN1.2-OC
MiniRooterV2-BN1.2-OC-dualboot
*Added 5/17
Flash these files after the previous if your girlfriend/sister/wife keeps nagging you this Nook Color is too fast, and you want to put an end to that.
Stock Kernel - BN 1.2 - Froyo
Stock Kernel - BN 1.2 - Froyo - Dual Boot
* These should work for other practical applications as well, so feel free to snag them just in case.
Devs - please let me know if you wish me to remove any/all of your work that have been included in this release. Thank you for your hard work and dedication, which inspires me to learn and contribute to this community.
Mods - if this is not acceptable, please move it/delete/or throw a fit.
FAQ:
ghintx said:
Unfortunately, I am having 2 issues. One is getting apps from the Amazon App store to install. I keep getting told that the system will only install apps from the Andoid app store, even though the settings are correct. The second issue is with button savior. the back button is not working in the applications section of the settings...
Click to expand...
Click to collapse
1. Go into Nook Color Utils - uncheck and then recheck "Allow Non-Market Apps"
2. Button Savior needs Super User permission, so make sure you press "Allow" when the pirate greets you.. in some cases it will not work since the stock BN codes has set the 'n' button to be "back" in fullscreen apps. In cases where there's a "back" button on the taskbar, that will also take priority from button savior.
Great work! Exactly what I was looking for. Only a few questions:
Do side-loaded apps appear in the APPS menu or do I have to use Zeam to access them?
Is it possible to replace Dalingrin's kernel with stock afterward?
Thanks
MK[PCTF] said:
Great work! Exactly what I was looking for. Only a few questions:
Do side-loaded apps appear in the APPS menu or do I have to use Zeam to access them?
Is it possible to replace Dalingrin's kernel with stock afterward?
Thanks
Click to expand...
Click to collapse
Use Zeam for sideloaded apps to show, download AppHome if you want to use the 'n' button to default to Zeam and still return to stock Home.
Just flash a stock kernel over it if you don't want to OC... or just not do anything to setCPU.
Btw: GOOOO THUNNDDERRR!!! Wooohoo... Durantula!!!
Something told me to look at XDA one more time before getting back to work. This is awesome, thanks.
Question
Sorry if this is a noob question, but how do I boot from this? I just got a replacement Nook Color that came pre-loaded with 1.2 and I can't seem to nooter it for the life of me!! I've downloaded this and copied it to an SD card, but it doesn't boot. I can't get it to boot from a Clockwork Recovery SD card either. Any help would be appreciated!!
More than happy to be corrected, but isn't SetCPU a paid app?
GabbleRatchet said:
More than happy to be corrected, but isn't SetCPU a paid app?
Click to expand...
Click to collapse
SetCPU is here... yes, you should donate or buy it if you wish. Thanks for pointing this out. I added the link to SetCPU from XDA. I might remove this if it becomes an issue and include No-Frill or something.
Zephyr757 said:
Sorry if this is a noob question, but how do I boot from this? I just got a replacement Nook Color that came pre-loaded with 1.2 and I can't seem to nooter it for the life of me!! I've downloaded this and copied it to an SD card, but it doesn't boot. I can't get it to boot from a Clockwork Recovery SD card either. Any help would be appreciated!!
Click to expand...
Click to collapse
First of all, you have to be able to get into Clockword Recovery. If you can boot into CWR from and SD card, all you have to do is choose "install from zip", choose the file from the OP, yes, and flash it. That should do the trick. It's not a "bootable" file by any means. If you still have problems, keep reading and try different methods. It's hard to give you advice since I don't know your level of knowledge.
Unfortunately, I am having 2 issues. One is getting apps from the Amazon App store to install. I keep getting told that the system will only install apps from the Andoid app store, even though the settings are correct. The second issue is with button savior. the back button is not working in the applications section of the settings...
ghintx said:
Unfortunately, I am having 2 issues. One is getting apps from the Amazon App store to install. I keep getting told that the system will only install apps from the Andoid app store, even though the settings are correct. The second issue is with button savior. the back button is not working in the applications section of the settings...
Click to expand...
Click to collapse
1. Go into Nook Color Utils - uncheck and then recheck "Allow Non-Market Apps"
2. Button Savior needs Super User permission.. in some cases it will not work since the stock BN codes has set the 'n' button to be "back" in fullscreen apps. In cases where there's a "back" button on the taskbar, that will also take priority from button savior.
HTCF4N said:
1. Go into Nook Color Utils - uncheck and then recheck "Allow Non-Market Apps"
2. Button Savior needs Super User permission.. in some cases it will not work since the stock BN codes has set the 'n' button to be "back" in fullscreen apps. In cases where there's a "back" button on the taskbar, that will also take priority from button savior.
Click to expand...
Click to collapse
That did it! Thanks! Now I just need to figure out how to dual boot this...
ghintx said:
That did it! Thanks! Now I just need to figure out how to dual boot this...
Click to expand...
Click to collapse
Glad to hear that.. Dual booting is kind of hairy, so make sure you do a lot of reading and do a nandroid backup before plunging in.
I have the stock BN 1.2 minirooted on the dual boot of the emmc. Primary partition has been back and forth between cm7 and nookie froyo.
HTCF4N said:
Glad to hear that.. Dual booting is kind of hairy, so make sure you do a lot of reading and do a nandroid backup before plunging in.
I have the stock BN 1.2 minirooted on the dual boot of the emmc. Primary partition has been back and forth between cm7 and nookie froyo.
Click to expand...
Click to collapse
That's what I was looking to do, but using the phiremod 6.2. Any suggestions?
HTCF4N said:
Glad to hear that.. Dual booting is kind of hairy, so make sure you do a lot of reading and do a nandroid backup before plunging in.
I have the stock BN 1.2 minirooted on the dual boot of the emmc. Primary partition has been back and forth between cm7 and nookie froyo.
Click to expand...
Click to collapse
How about using [ADV][DEV][CWM]Copy Nook Stock to SDcard Image[5/9] thread to move your image to SDcard.
Keep whatever we want in emmc, and boot this from the SDcard.
I currently have phiremod v6.2 in emmc, with Dal's beta 3.1 32 kernel on verygreens SDcard. Going to try installing [UPDATE ZIP] Stock 1.2 update.zip flashable from CWM, your ROM, and then using rack's [ADV][DEV][CWM]Copy Nook Stock to SDcard Image[5/9] thread to move your image to SDcard to move it to another SDcard.
From CWM will do nandroid backup before and will restore after I complete the above procedure. When I boot phiremod v6.2 from emmc, I have a 16GB data/video/music SDcard in my nookcolor.
lschroeder said:
How about using [ADV][DEV][CWM]Copy Nook Stock to SDcard Image[5/9] thread to move your image to SDcard.
Keep whatever we want in emmc, and boot this from the SDcard.
I currently have phiremod v6.2 in emmc, with Dal's beta 3.1 32 kernel on verygreens SDcard. Going to try installing [UPDATE ZIP] Stock 1.2 update.zip flashable from CWM, your ROM, and then using rack's [ADV][DEV][CWM]Copy Nook Stock to SDcard Image[5/9] thread to move your image to SDcard to move it to another SDcard.
From CWM will do nandroid backup before and will restore after I complete the above procedure. When I boot phiremod v6.2 from emmc, I have a 16GB data/video/music SDcard in my nookcolor.
Click to expand...
Click to collapse
Used emmc CWM to install Stock 1.2 update and this ROM. Did factory reset and then install both from CWM before rebooting. Will setup some before moving to SDcard.
Edit 1: Will report status as I go here.
HTCF4N said:
[*] The main reason for not modding file systems and installing the google market is to avoid problems I ran into with the MN 4.5.6 install, ie. touch page flips of children's book, BN store not working on purchases, instore access, and other headaches.
Click to expand...
Click to collapse
For the record, a fix for the kids books was posted last week (it's in the OP for MN) and the other things still work with MN 4.5.6 for most people (I have two with none of those issues). Nice work though!
You might want to update the versions though. SetCPU is at 2.13. And Zeam is up to 2.9.5 (looks like this is 2.9.2)
GabbleRatchet said:
More than happy to be corrected, but isn't SetCPU a paid app?
Click to expand...
Click to collapse
It's free for XDA members so you don't have an issue there, but let your conscience be your guide to donation.
Zephyr757 said:
Sorry if this is a noob question, but how do I boot from this? I just got a replacement Nook Color that came pre-loaded with 1.2 and I can't seem to nooter it for the life of me!! I've downloaded this and copied it to an SD card, but it doesn't boot. I can't get it to boot from a Clockwork Recovery SD card either. Any help would be appreciated!!
Click to expand...
Click to collapse
This is quite concerning actually because there was a report of another recent Nook that would not boot from SD. They "determined" that was a faulty Nook, but your situation worries me. Please keep us posted on this one.
Zephyr757 said:
Sorry if this is a noob question, but how do I boot from this? I just got a replacement Nook Color that came pre-loaded with 1.2 and I can't seem to nooter it for the life of me!! I've downloaded this and copied it to an SD card, but it doesn't boot. I can't get it to boot from a Clockwork Recovery SD card either. Any help would be appreciated!!
Click to expand...
Click to collapse
Zephyr - What are the first six digits of your Nook's S/N? Something like 201146....?
doncaruana said:
For the record, a fix for the kids books was posted last week (it's in the OP for MN) and the other things still work with MN 4.5.6 for most people (I have two with none of those issues). Nice work though! ...
Click to expand...
Click to collapse
If I wanted couple of the gapps, say gmail and google voice could I just use my side loaded Titanium Backup to restore them from my CM7 data disk that contains them?
In MN what gapps are they using? Could I add them here later if I wanted to? I guess that defeats the purpose of this ROM.
Is there an alternative to gmail that anyone would recommend? I use google voice in CM7 for texting, how about an alternative for google voice?
doncaruana said:
For the record, a fix for the kids books was posted last week (it's in the OP for MN) and the other things still work with MN 4.5.6 for most people (I have two with none of those issues). Nice work though!
You might want to update the versions though. SetCPU is at 2.13. And Zeam is up to 2.9.5 (looks like this is 2.9.2)
It's free for XDA members so you don't have an issue there, but let your conscience be your guide to donation.
This is quite concerning actually because there was a report of another recent Nook that would not boot from SD. They "determined" that was a faulty Nook, but your situation worries me. Please keep us posted on this one.
Click to expand...
Click to collapse
I don't have my NC with me (at work right now) to verify the S/N, but I was able to root my previous NC (very seasoned with rooting many other android devices) with no problems. I'm beginning to think that I may have a "faulty" one, but I don't know how I can get it swapped again within the warranty. I did notice ONE dead pixel, but I doubt they'll swap it out for that! This thing is virtually useless to me without being able to root it!!!
Can install Keyboards automatically or will I work the same as 4.5.6?
Sent from my PC36100 using XDA App
lschroeder said:
If I wanted couple of the gapps, say gmail and google voice could I just use my side loaded Titanium Backup to restore them from my CM7 data disk that contains them?
In MN what gapps are they using? Could I add them here later if I wanted to? I guess that defeats the purpose of this ROM.
Is there an alternative to gmail that anyone would recommend? I use google voice in CM7 for texting, how about an alternative for google voice?
Click to expand...
Click to collapse
You could try installing gapps and google voice and see if it works. It might not without modifying system files, and that's something this release tries to avoid. You don't need an alternative to gmail since the included BN email app is a multi-email client (gmail, yahoo, etc) but doesn't include exchange (Moxier Mail is a great alternative).
Can install Keyboards automatically or will I work the same as 4.5.6?
Click to expand...
Click to collapse
what??
For the record, a fix for the kids books was posted last week (it's in the OP for MN) and the other things still work with MN 4.5.6 for most people (I have two with none of those issues). Nice work though!
You might want to update the versions though. SetCPU is at 2.13. And Zeam is up to 2.9.5 (looks like this is 2.9.2)
Click to expand...
Click to collapse
That's nice.. I only had to format/reinstall 23523434x to find out after MN, the BN store doesn't even load, give me these weird errors and check barnesandnoble.com blah blah. I then became a hippy and did it my way. And sometimes, less is more... even in version numbers of apps (which doesn't add anything to the functionality except a new version number).
@ Zephyr757 - hope you didn't get a lemon. I thought you just copied the zip file to the uSD and tried to boot that.
I know that for streakdroid 1.9.1 and before, there's option in install.txt to enable the compatibility for gameloft games.
However, I've jump to DSC gingerbread. For now, I'm having problem with the compatibility with gameloft games..（my lcd density is 160) any idea how to fix this problem?
Thanks a lot guys ！！
Could you be more specific about encountered incompatibility?
Hmmm.. When I browse with phone, the apps couldn't be found thru the market. And if I browse from computer in the android Market, and it shows that the game is not compatible with ur device. The game is mentioned is Brothers in Arms 2. Besides that, for yesterday android market 10 cents promotion, only 9 apps are showing up for me, the one dint show is one of the gameloft game. I also tried to download the apk, and after I installed, it failed to download the data package, and said that the device is not compatible. Thanks for helping me solving the problem ya, and thanks
Have you tried using market enabler to fake mobile provider?
If this doesn't help, i'll look for another fingerprints.
I don't have it handy, but the fingerprint for a Nexus S allowed me to download Asphalt 6. I reverted back to the original though before I could test the game.
Found it!
In your build.prop, find the line that starts with ro.build.fingerprint= and replace it with this one:
ro.build.fingerprint=google/sojua/crespo:2.3.6/GRH78C/93600:user/release-keys
Reboot your phone and see if it works. Make sure you make a copy of your original build.prop though just in case.
You must be rooted to do this.
n0p & lordmorphous,
Thanks for the fast response for u guys, will try it later ^_^
Anyway, thanks u guys for the great DSC rom =)
you could try getting games from gameloft wap store??
Find out what version is compatible and download it
Someone said xperia x10 mini versions work??
I have had some luck with htc desire versions as well (just dont choose any samsungs)
older adreno phone versions should be compatible.. (reminds me I need to update my gaming thread asap)
Update:
I've tried both methods, results returned seem to be the same ><
Update 2: I think is the gameloft compatibility issue.. even installed the apk file, it still failed to download the data over wifi, mentioning that the game is not compatible with your device, ask for refund. Same happen to my fren's moto ..
I'm running DSC ROM and in order to get some apps (Sleepy Jack, Tetris Free) showing up in the Market, I changed the fingerprint to:
ro.build.description=3.06.405.1 CL150597 release-keys
ro.build.fingerprint=htc_wwe/htc_ace/ace:2.3.5/GRJ90/150597.1:user/release-keys
They were succesfully installed, so what are the reasons to change the build.prop back to the DSC default?
I think there's no reason Thank you for sharing this fingerprint.
_n0p_ said:
I think there's no reason Thank you for sharing this fingerprint.
Click to expand...
Click to collapse
Thank you for answering and off course a great ROM!
So the only thing is that the Android Market now thinks that my device is a HTC Desire HD.
FYI: In order to make the spoof fingerprint work, I also changed
ro.product.brand=htc_wwe
ro.product.name=htc_ace
ro.product.device=ace
ro.product.board=spade
ro.product.manufacturer=HTC
After editing the build.prop I've had to 'Clear data' from Market app and Google Services Framework, reboot into StreakMod to Clear cache partition, Wipe dalvik cache and Fix permissions.
Djezpur said:
I'm running DSC ROM and in order to get some apps (Sleepy Jack, Tetris Free) showing up in the Market, I changed the fingerprint to:
ro.build.description=3.06.405.1 CL150597 release-keys
ro.build.fingerprint=htc_wwe/htc_ace/ace:2.3.5/GRJ90/150597.1:user/release-keys
They were succesfully installed, so what are the reasons to change the build.prop back to the DSC default?
Click to expand...
Click to collapse
thanks ! u brighten up my days
This tweak will make the camera failed to work
I'm looking a bit more at rooting via manual nooter on OS 1.4.1.
As of now, the Android Market is not working
In my hands, the BN shop is also not working. Books cannot be downloaded. (The reader does work, though, so you can shop and then download to your PC, then push the files in manually if you like.)
Together, those two elements not working argue against rooting 1.4.1 for anything other than study and development, I think.
- 1.4.1 installs on a device which had already been rooted (this device is rooted but not overclocked.)
- boot from a manual nooter 4-5-18 disks works
- after applying MN 4.5.18 and the APK enabler, the device booted. Root was retained and SU works fine (I was able to use adb wireless)
- install via ADB works
Other things to be aware of:
- this is not a Gingerbread release for the NC.
- the home button behavior is changed a LOT. Home Catcher for the Nook Tablet will also work here, though.
- the device automagically snarfs Google contacts if it's registered to a gmail address, it seems. There is no warning on that. I think that behavior is a Big Effing Problem.
About to try hopefully it works. I know I couldnt install update on 1.3 with CWM going back to complete stock and then update and then MN.
Yes, if CWR is written to your boot, you cannot install BN updates.
It might be possible to use a flashable 1.3 installer to write only /boot, reboot, then update to 1.4.1. I know there is a flashable 1.3, but I do not know where it lives.
roustabout said:
Yes, if CWR is written to your boot, you cannot install BN updates.
It might be possible to use a flashable 1.3 installer to write only /boot, reboot, then update to 1.4.1. I know there is a flashable 1.3, but I do not know where it lives.
Click to expand...
Click to collapse
Yeah I went back to 1.3 stock and then to 1.4.1 update.
It would be nice if some one conforms about Market
"It would be if some one conforms about Market"
Yeah, wouldn't it?
I'm figuring from the lack of screaming it's probably working.
Market is up. Some apps still missing. Having a bit of problem with Zeam launcher. Nook launcher is taking control.
Straight from my ICS i897 Sonic Screwdriver!!!!!
So from a rooted 1.3.1 you:
Use CWM to install a vanilla 1.3 ROM, then update to 1.4.1 via B&N download, then root using only 4.5.18? I seem to remember to root 1.3.1 you needed to root with 4.5.16 and then 4.5.18.
I have been able to use 4-5-18 without any problems on both 1.2 and 1.3.
You may not even need to install the vanilla ROM - you may well be able to install to a rooted device, so long as you have not meddled with /boot, either by installing a CWR boot internally or by overclocking.
My fast experiment this morning involved updating a rooted 1.3, then rooting that resulting 1.4.1.
Anyone check to see if it will still boot from an SD card, just want to confirm before update, but because it is still rootable I can always downgrade.
Edit: I am in the process of updating as I type this, I will post the results in case anyone else needs them.
tsukisan said:
Anyone check to see if it will still boot from an SD card, just want to confirm before update, but because it is still rootable I can always downgrade.
Click to expand...
Click to collapse
Others have tested and confirmed, but that's not something they can change on this device with a software update anyway
Good to know, I hadn't seen it yet but my testing confirms this, thanks for the reply
MentalDragon said:
Market is up. Some apps still missing. Having a bit of problem with Zeam launcher. Nook launcher is taking control.
Straight from my ICS i897 Sonic Screwdriver!!!!!
Click to expand...
Click to collapse
In my case the Market runs but it's totally useless: I can't see my apps, it doesn't find most of what I want to install and when it does I can't install anything (it just goes back to the Apps menu). So it totally sucks since the B&N market is really lame!
nookerrooter said:
So from a rooted 1.3.1 you:
Use CWM to install a vanilla 1.3 ROM, then update to 1.4.1 via B&N download, then root using only 4.5.18? I seem to remember to root 1.3.1 you needed to root with 4.5.16 and then 4.5.18.
Click to expand...
Click to collapse
For whatever reason, many Nook Colors that come stock with 1.3 installed just bootloop if rooted with 4.6.16, even if rooted first with 4.5.18. I can confirm this with a new NC purchased for my girlfriend's mom. Runs OK if just rooted with 4.5.18, except for it having the ancient market. Haven't been able to update the market yet, though gmail will update itself.
Updated to 1.4.1 (had to return to stock 1.3 to install the update, even without CWM flashed), using homecatcher to overcome the new "n" button "feature", but market is hit and miss. Was able to download and install Astro, but Titanium Backup doesn't want to download and install. I'll try sideloading it later.
What's the new n button feature? Is it possible to make a flashable update, like with 1.2 and 1.3?
RSchmauk said:
What's the new n button feature? Is it possible to make a flashable update, like with 1.2 and 1.3?
Click to expand...
Click to collapse
If you press it once, it brings up the B&N "dock" that used to be at the bottom of the screen. If you press it twice, it brings up the B&N launcher.
Correction, I thought I was able to download Astro from market, but apparently I didn't. Now I've got no way to sideload apps, which makes this pretty useless...
magicland said:
If you press it once, it brings up the B&N "dock" that used to be at the bottom of the screen. If you press it twice, it brings up the B&N launcher.
Correction, I thought I was able to download Astro from market, but apparently I didn't. Now I've got no way to sideload apps, which makes this pretty useless...
Click to expand...
Click to collapse
ADB commands are your friend! Pretty much as long as you can enable ADB you can sideload with zero issues.
c0ldburn3r said:
ADB commands are your friend! Pretty much as long as you can enable ADB you can sideload with zero issues.
Click to expand...
Click to collapse
I realize this, but this nook is a gift for my girlfriend's mom, who lives out of state, and I know there's no way she's going to sideload everything using ADB... I need to get her a working market, even if I've got to go back to 1.3 and disable the update.
Ended up using 4.5.18 on my stock 1.3 NC. ADB Sideloaded in the Kindle app and a couple others and used the Nook App Manager to drop icons out on the main stock launcher page. I was really looking to add teh Kindle app so I could read all my purchased books on a single device, so I'm quite content. I'd like to see better market, etc but it's not a dealbreaker for me.
Just in case someone follows this thread, rooted 1.4.1 is working well now. manualnooter-5-12-18.zip does it for ya.
Market works. You can add non-B&N apps to the B&N app and home screens using Nook Color App Manager. Putting the Kindle app on there is no problem. Netflix, HBO GO and Max GO work. Hulu Plus refuses to run on the device. B&N subscriptions download and update the dock. B&N enhanced content (e.g. Wired magazine) work fine.
If non-techie friends and family want an enhanced B&N Nook Walled Garden experience, this will do it!
I really this tablet but the big dealbreaker for me at this point is some basic apps are not compatible or at least play store think it is. Is there any way around this?
superflysocal said:
I really this tablet but the big dealbreaker for me at this point is some basic apps are not compatible or at least play store think it is. Is there any way around this?
Click to expand...
Click to collapse
Most of those that Play Store says are incompatible are not incompatible. It is just that the Nook HD/HD+ is not a device that should be accessing their site (it should be accessing B&N store). So just reading the characteristics of the device (screen size, density, and many other things), it does not know what to think, so it just says not compatible. Most of them will run. Just get them somewhere else, Amazon, 1mobile, sideloaded from other devices etc.
I only have found one app that would not run. Google Voice.
Sent from my Nook HD+ Running CM10 on SD
Most will run I have only found 2 that will not, google voice and sim city.
Sent from my Rooted Nook HD+
I already posted this yesterday here, Chrome_18_0_1026320.apk from apktop says it missing something after installing. Already read somewhere about an older version which should work, but I haven't figured out which is the most recent one which does work. I want to install the latest working version.
I used this method for "incompatible device apps":
Some apps showed incompatible device on Play Store so I downloaded and installed them on to a rooted Galaxy SII phone using the Temp Unroot function. Then back-upped with Titanium Backup and e-mailed it by Gmail. Then download it to my at that point rooted HD+ (2.0.4). Apps still didn't work because my HD+ was rooted, but worked after the 2.0.5 update, as my HD+ isn't rooted any more at the moment. I think this workaround still works for many apps. (Only the root was lost after the update, so the rest still is working like before).
So some testing needs to be done before you can say an app really is incompatible. Would be good maybe to make a list of some apps, not?
Another APK that does not work...
Also I have tried to install Subway Surfer from 1mobile, google play store, and downloaded apk. In all three instances it installs and gets to start screen which lasts about 5 seconds. Then screen flashes and goes back to home or launcher. Really wish I could figure this one out. Two Nook HD's for the kids and most wanted game does not work. :crying: Jay
Jaysinet said:
Also I have tried to install Subway Surfer from 1mobile, google play store, and downloaded apk. In all three instances it installs and gets to start screen which lasts about 5 seconds. Then screen flashes and goes back to home or launcher. Really wish I could figure this one out. Two Nook HD's for the kids and most wanted game does not work. :crying: Jay
Click to expand...
Click to collapse
That means it just will not run on your machine. Does the Play Store say anything about which versions of android it will run on? Stock is 4.0.4.
Sent from my HD+ running CM10 on SD with XDA Premium
Yeah it says 2.3.3 or higher. Forgot to mention my HD has the GAPPS, unknown sources, etc.
Trance-M said:
I already posted this yesterday here, Chrome_18_0_1026320.apk from apktop says it missing something after installing. Already read somewhere about an older version which should work, but I haven't figured out which is the most recent one which does work. I want to install the latest working version.
I used this method for "incompatible device apps":
Some apps showed incompatible device on Play Store so I downloaded and installed them on to a rooted Galaxy SII phone using the Temp Unroot function. Then back-upped with Titanium Backup and e-mailed it by Gmail. Then download it to my at that point rooted HD+ (2.0.4). Apps still didn't work because my HD+ was rooted, but worked after the 2.0.5 update, as my HD+ isn't rooted any more at the moment. I think this workaround still works for many apps. (Only the root was lost after the update, so the rest still is working like before).
So some testing needs to be done before you can say an app really is incompatible. Would be good maybe to make a list of some apps, not?
Click to expand...
Click to collapse
You're using gapps in the 2.0.5 update, but are you rooted?
Leapinlar, that's what has me baffled. The nook has 4.0.4 android yet a simple app that only requires 2.3.3 android will not work. I am sure it's just a setting that it doesn't like but I have tried it on both HD 's with the same results My nooks are not rooted but used your zips for stock. All other apps have installed and worked thus far. Do you have any idea what the app may be hanging up on with the nook? Thx
abense said:
You're using gapps in the 2.0.5 update, but are you rooted?
Click to expand...
Click to collapse
Is he saying it is running because of losing root? You can test that by installing gapps without root. See my cwm thread to see how to get that.
Sent from my HD+ running CM10 on SD with XDA Premium
Hi, I have Subway Surfers running fine on my Nook HD+, it's ver. 1.6.0 dated 2nd January 2013. I've had it running on Cm10 and now CM10.1 roms fine.
Guessing here but it does have the option for in app purchasing, maybe that's why it's not liking it on the stock Tom with Gapps side loaded? It's a free app so can upload the APK if you like? Pm me if needed
Sent from my GT-I9305 using xda app-developers app
Hey I am thinking the issue may be that I am not fully rooted but rather did Leapinlar's stock zip flashes for unknown sources and such. Do you guys think using the universal root zip and flashing that may solve my issues? Also will running the universal root zip work now that I have already done the other GAPPS, Extras, Unknown Sources zip
Jaysinet said:
Hey I am thinking the issue may be that I am not fully rooted but rather did Leapinlar's stock zip flashes for unknown sources and such. Do you guys think using the universal root zip and flashing that may solve my issues? Also will running the universal root zip work now that I have already done the other GAPPS, Extras, Unknown Sources zip
Click to expand...
Click to collapse
Yes, the root can be added later with no problem. You notice he said that app worked on CM10, not stock. I doubt if root will help. But you can try and if you decide you want to remove root, I have a zip for that too.
Sent from my HD+ running CM10 on SD with XDA Premium
leapinlar said:
Is he saying it is running because of losing root? You can test that by installing gapps without root. See my cwm thread to see how to get that.
Click to expand...
Click to collapse
Yes I ended up doing this last night
Now I'm running 2.0.5 rooted with gapps installed, as well as running CM10 off of an 8GB MicroSDHC of mine
Thanks!
superflysocal said:
I really this tablet but the big dealbreaker for me at this point is some basic apps are not compatible or at least play store think it is. Is there any way around this?
Click to expand...
Click to collapse
I've managed to use ES File Explorer to backup a couple of apps that the Play Store listed as "incompatible."
Plants vs. Zombies comes up as incompatible and I can't get ES to back it up.
Real Racing 2 comes up as compatible, but when you launch it the first time it wants to install additional files. That secondary step fails.
Further, i can't get ES to back it up either.
leapinlar said:
Yes, the root can be added later with no problem. You notice he said that app worked on CM10, not stock. I doubt if root will help. But you can try and if you decide you want to remove root, I have a zip for that too.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
Great, being able to add AND remove root is what I was looking for, might have missed that while reading here. That would work like a "temp unroot", just not by a single click in an app, but that wouldn't be a big problem. So maybe it's time to give CM10 a try now.
Indeed some apps suddenly do work when your device is not rooted, so they do a check. Because I had them installed while being rooted and lost root because of the 2.0.5 update I could notice that they worked afterwards. On the rooted Galaxy SII I used the "Temp unroot" option in SuperSU, so I could install about all apps, those that need root access and those which don't want root access to install, run or both.
I do believe I used Titanium Backup while "Temp unroot" was on, while you only can install Titanium Backup on a rooted device as far as I know. Need to check this once more, it wasn't my phone I used.
Playing with and without root might be needed to see if some apps do or don't work on the HD+. At least by this you can out-rule whether being rooted or not is causing the app not to install and/or work.
Trance-M said:
Great, being able to add AND remove root is what I was looking for, might have missed that while reading here.
Click to expand...
Click to collapse
You did not miss it. It was probably not there when you read it. I am always changing and adding things to my CWM thread. You need to watch the change log in the second post of that thread.
Sent from my HD+ running CM10 on SD with XDA Premium
Anyone else tried to run Words with Friends from CM10 SD card? It installs OK from the Google Play store, but locks up after 1 or 2 turns. If not for this, I'd have very little reason to ever boot back into stock OS.
Jaysinet said:
Leapinlar, that's what has me baffled. The nook has 4.0.4 android yet a simple app that only requires 2.3.3 android will not work. I am sure it's just a setting that it doesn't like but I have tried it on both HD 's with the same results My nooks are not rooted but used your zips for stock. All other apps have installed and worked thus far. Do you have any idea what the app may be hanging up on with the nook? Thx
Click to expand...
Click to collapse
From the android log it would appear it's the ability of in-game billing causing the issue:
D/InAppBillingManager( 5896): AndroidBilling: No Billing Support Yet!
Not sure how to get around it but that seems to be the issue.
David
i would like to have your version of subway surfer, please can you upload it, and let me know how to retrieve it -- thanks
CharlesW123 said:
Hi, I have Subway Surfers running fine on my Nook HD+, it's ver. 1.6.0 dated 2nd January 2013. I've had it running on Cm10 and now CM10.1 roms fine.
Guessing here but it does have the option for in app purchasing, maybe that's why it's not liking it on the stock Tom with Gapps side loaded? It's a free app so can upload the APK if you like? Pm me if needed
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse