Ok, so I've been trying to apply custom framework from a fellow xda member without success. I've flashed these metamorph files dozen of times and only half the icons show up, but the signal bars NEVER change, NEVER! It's so frustrating!! I just tried using the UOT Kitchen to see if that worked and it didn't. For gingerbread ROMs you have to upload systemUI.apk, com.htc.recourses and framework-res.apk which seems to take care of all the icon locations. After flashing the zip on first boot it shows the new signal bars for a few seconds, then switches back to the ugly stock 4 bars.
Does anyone have any idea what the problem may be? I figured uploading all three files I listed above would take care of the stupid signal bars, but once again I was wrong. Any help/advice/ideas is greatly appreciated.
Mods I apologize if this is in the incorrect section.
WormDoes said:
Ok, so I've been trying to apply custom framework from a fellow xda member without success. I've flashed these metamorph files dozen of times and only half the icons show up, but the signal bars NEVER change, NEVER! It's so frustrating!! I just tried using the UOT Kitchen to see if that worked and it didn't. For gingerbread ROMs you have to upload systemUI.apk, com.htc.recourses and framework-res.apk which seems to take care of all the icon locations. After flashing the zip on first boot it shows the new signal bars for a few seconds, then switches back to the ugly stock 4 bars.
Does anyone have any idea what the problem may be? I figured uploading all three files I listed above would take care of the stupid signal bars, but once again I was wrong. Any help/advice/ideas is greatly appreciated.
Mods I apologize if this is in the incorrect section.
Click to expand...
Click to collapse
Driving me nuts too. Gladly buy someone a 12 pack (donate) if you can get me Gtalk, Gmail, Messages and Mail Color Icons like HERE
I posted my problem in the UOT thread in android development section. Hopefully someone can figure this out. I just don't understand why if you have to upload all 3 files where the HTC stock icons are why they don't change. It's mind boggling
Could not agree more.
Friendly bump
Is UOT setup for the Thunderbolt? Meaning will it replace the right signal bars, etc? Doesnt sound like it. Just use 7zip and replace the images yourself.
mbh87 said:
Is UOT setup for the Thunderbolt? Meaning will it replace the right signal bars, etc? Doesnt sound like it. Just use 7zip and replace the images yourself.
Click to expand...
Click to collapse
It's set up for gingerbread sense, so I think that it should work. AFA replacing icons manually, I don't know how to do that, you should know considering I tried it with your framework and had no luck I just don't understand why the new icons show up for a few seconds then they switch to the stock icons.
Yeah but they probably don't have it set up for Tbolts gingerbread. The signal bars are more than likely named different than the other phones.
That's understandable, but why would the new signal icon show up for a few seconds then disappear?
Also, since you're very familiar with this, could you post in here or pm me the name of all the signal/wifi/3G/battery icons and where they're located that need to be changed in order to get custom icons working properly? Or if there's a list you know about could you please link me to it?
WormDoes said:
Also, since you're very familiar with this, could you post in here or pm me the name of all the signal/wifi/3G/battery icons and where they're located that need to be changed in order to get custom icons working properly? Or if there's a list you know about could you please link me to it?
Click to expand...
Click to collapse
Battery is in framework-res.apk/drawable-hdpi (Example - stat_sys_battery_0). Signal/wifi/3G is in SystemUI.apk/drawable-hdpi (example - 3G ICONS -stat_sys_data_connected_3g and cdma_sys_data_connected_3g WIFI -stat_sys_wifi_signal_0). BUT, if you use any of the BAMF toolkit edits they will override the SystemUI.apk. You would have to modify the eSystemUI.apk and dSystemUI.apk. They are located in system/etc/scripts. Hope this helps ya out a little bit.
lilcdroid said:
Battery is in framework-res.apk/drawable-hdpi (Example - stat_sys_battery_0). Signal/wifi/3G is in SystemUI.apk/drawable-hdpi (example - 3G ICONS -stat_sys_data_connected_3g and cdma_sys_data_connected_3g WIFI -stat_sys_wifi_signal_0). BUT, if you use any of the BAMF toolkit edits they will override the SystemUI.apk. You would have to modify the eSystemUI.apk and dSystemUI.apk. They are located in system/etc/scripts. Hope this helps ya out a little bit.
Click to expand...
Click to collapse
Wow, this seems crazy hard. I'm going to give it a shot, though. Thank you for telling me where they are located
WormDoes said:
Wow, this seems crazy hard. I'm going to give it a shot, though. Thank you for telling me where they are located
Click to expand...
Click to collapse
I personally replace the battery images only. I was in total shock when I first started but now I can do it within minutes.. The one thing I don't know how to do is edit the xml files which you have to do in order for the icons to display properly. So in other words the stock battery only has 5 or 6 images but if you use a rom or theme that has a % (which I hate) it would have 101 images I believe.. so what I do is pull the xml/image files from a stock theme and place them in the rom I want. I'm not sure how to replace signal bars but pm me if you need help with battery.
It sounds way harder than it is
Sent from my ADR6400L using XDA App
Related
I'm looking to start a new metamorph project this week. So, I figured I'd ask the community if anyone had any requests of how they want their phone modded? If you have any ideas or requests of framework modifications (satus bar, status bar icons, battery, notification pulldown items settings menu, ex.), just let me know here or shoot me a PM and I'll see what I can do. Thanks!
I have posted this before but as far as I can tell no one has done it for eclair. I would like a set of black apps. I have the modded black dialer and would like someone to either create or help me create a black version of twitter, gmail and gtalk.
Black meaning the main screen are all black (aka no power used) with maybe a whitish text and grey highlight bar. I know this can be done as I have found it for froyo, I am just not ready to move to froyo yet as my bionix rom is nearly perfect.
adm1jtg said:
I have posted this before but as far as I can tell no one has done it for eclair. I would like a set of black apps. I have the modded black dialer and would like someone to either create or help me create a black version of twitter, gmail and gtalk.
Black meaning the main screen are all black (aka no power used) with maybe a whitish text and grey highlight bar. I know this can be done as I have found it for froyo, I am just not ready to move to froyo yet as my bionix rom is nearly perfect.
Click to expand...
Click to collapse
I have yet to modify an app, but I will definitely give it a try. It must be easier then modding the framework anyway. Do you have any screenshots of the froyo version? Or better yet, a link to download the apps for froyo?
I am by no means trying to steal anyone elses hard work I have seen the black apps in froyo rom called 928BlackDroidGlass there is also a market and twitter addon. I have tried to re-create these apps in eclair by doing a file by file compare of a standard froyo version and this version then using the diff files making the same changes in the froyo version. I have so far failed miserably. There are about 10 xml files just for gtalk alone that need color changes it seems. It would seem almost all the changes are to the background color or text color. I know I am close but just cant get it working and just dont have enough time to re-trace and find my error. If you like when I am home I can send you the filenames and locations that I suspect are the xml files that need to be changed for the gtalk app.
I took a look and think I know which files your talking about, but definitely send me what you got and maybe we can get it working.
Honestly I just want a plain touchwiz stock battery mod like how it should be. I started working on it but haven't picked it back up. I just want the stock color blue no percentage and it be accurate and compatiable with JI6.
mentalex2 said:
I took a look and think I know which files your talking about, but definitely send me what you got and maybe we can get it working.
Click to expand...
Click to collapse
This is what I believe are all the files needed for GTALK
*** Layout
chat_screen.xml
chat_view.xml
custom_title.xml
group_chat_approval.xml
picture_view.xml
search_results.xml
set_status.xml
*** Values
colors.xml
*** Drawable
chat_item_background.xml
In each there are settings for background of test color. It appears if we reverse the colors on them we may get the desired effect but I cant get it to work. Color codes appear to be FF000000 and FFFFFFFF
Any help yuo can provide would be much appreciated. Would also love to do this for other apps as I mentioned previously but have not had time to do a file compare on anything else.
P.S. Remind me to send you my twframework and framework files, a combination of mods based on bioni and black mesh with notification icons by s0niqu3 (her skills are unparalleled) and the accurate segmented battery mod (green as dont like the blue).
danr238 said:
Honestly I just want a plain touchwiz stock battery mod like how it should be. I started working on it but haven't picked it back up. I just want the stock color blue no percentage and it be accurate and compatiable with JI6.
Click to expand...
Click to collapse
You got it. I'm gonna get this up and running sometime this week. I take it you're on bionix?
Ps- I have created a blue battery mod WITH percentage ([Mod]Battery mod (blue, accurate) located somewhere in this thread.You can try it out to hold you over until I can get the new one up.
Sent from my SGH-T959 using XDA App
adm1jtg said:
This is what I believe are all the files needed for GTALK
*** Layout
chat_screen.xml
chat_view.xml
custom_title.xml
group_chat_approval.xml
picture_view.xml
search_results.xml
set_status.xml
*** Values
colors.xml
*** Drawable
chat_item_background.xml
In each there are settings for background of test color. It appears if we reverse the colors on them we may get the desired effect but I cant get it to work. Color codes appear to be FF000000 and FFFFFFFF
Any help yuo can provide would be much appreciated. Would also love to do this for other apps as I mentioned previously but have not had time to do a file compare on anything else.
P.S. Remind me to send you my twframework and framework files, a combination of mods based on bioni and black mesh with notification icons by s0niqu3 (her skills are unparalleled) and the accurate segmented battery mod (green as dont like the blue).
Click to expand...
Click to collapse
Sounds good. I'm away for the weekend, but I will contact you early next week. I'd like to get gmail running properly before moving on to other apps. Thanks for your help!
danr238 said:
Honestly I just want a plain touchwiz stock battery mod like how it should be. I started working on it but haven't picked it back up. I just want the stock color blue no percentage and it be accurate and compatiable with JI6.
Click to expand...
Click to collapse
I would love this for all the Froyo ROMs that are out. Or any morphs for that matter!
mentalex2 said:
You got it. I'm gonna get this up and running sometime this week. I take it you're on bionix?
Ps- I have created a blue battery mod WITH percentage ([Mod]Battery mod (blue, accurate) located somewhere in this thread.You can try it out to hold you over until I can get the new one up.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah I've used your mod and like it. Thanks for taking request. Like I said I started working on it but with a 2 an 3 year old and my wife working nights I have no time to dedicate to it. Thanks again!
Observations:
I was skeptical at first because there are no QHD resolutions listed in UOT kitchen, but figured if I supplied the files, then it would maintain the resolutions in the files.
Must have all three files to upload for it to compile correctly...
1. SystemUI.apk
2. Framework-res.apk
3. com.htc.resources.apk
I've changed the battery indicatior, added statusbar icons successfully, and change the background to more transparent on the Notifications/Quick Setting pull-down. I've also successfully changed the lockscreen icons.
I'm having difficulties making the statusbar more transparent, however. They have a setting on the Status Bar tab, but it seems to have no effect.
I did try to manually adjust the transparency on status_bar_background.png in Framework-res.apk, but it didn't seem to do the trick. Is there another file that is used based on the Sense base?
Nope. Those are the files needed, one bit of advice though--triple check the operational file it uses.
I.E. For boot animation, use the CM file directory, not the suggested data/local. It may be something in the framework.res file that needs to be changed. UOT works for EVERYTHING, provided you make sure the operational file is correct upon submission.
jeepers007 said:
I'm having difficulties making the statusbar more transparent, however. They have a setting on the Status Bar tab, but it seems to have no effect.
I did try to manually adjust the transparency on status_bar_background.png in Framework-res.apk, but it didn't seem to do the trick. Is there another file that is used based on the Sense base?
Click to expand...
Click to collapse
Hmmm Sense(or any ginger for the matter) responds to the status bar B/G used in SystemUI.apk(drawable HDPI). And the images used on all the qHD phones from HTC use the same size for .pngs as their WVGA counterparts(some things are bigger, but not many), scaling seems pretty good AFAIK.
Ace42 said:
Hmmm Sense(or any ginger for the matter) responds to the status bar B/G used in SystemUI.apk(drawable HDPI). And the images used on all the qHD phones from HTC use the same size for .pngs as their WVGA counterparts(some things are bigger, but not many), scaling seems pretty good AFAIK.
Click to expand...
Click to collapse
Found it! Giving that a try.
Thanks!
Trust me, it works. I cannot remember off the top of my head (bit drunk) but UOT works on just about everything. You need to double check where each enabled visual/operational is WITHIN your choice of rom. Then, you can triple check UOT's placement of the modified file.
I'm trying to remove the clock, but I couldn't find where that was located anywhere in there. Anyone have any pointers?
I'm a kitchen noob so I just made a simple battery change that I'm going to put on when it's done cooking.
(BeastMOD 1.3.1)
Spovik said:
I'm trying to remove the clock, but I couldn't find where that was located anywhere in there. Anyone have any pointers?
I'm a kitchen noob so I just made a simple battery change that I'm going to put on when it's done cooking.
(BeastMOD 1.3.1)
Click to expand...
Click to collapse
Let me look into it when I get home...I might be able (time willing) download your current rom and cook it--or at least find where to zap the clock so you can do it to your liking.
My battery cooking turned out to cause a boot loop so no-go on that. I appreciate any help you can offer and let me know if there's anything I can do to make things easier.
Spovik said:
I'm trying to remove the clock, but I couldn't find where that was located anywhere in there. Anyone have any pointers?
I'm a kitchen noob so I just made a simple battery change that I'm going to put on when it's done cooking.
(BeastMOD 1.3.1)
Click to expand...
Click to collapse
The clock is in the service.jar.. The kitchen won't work for that mod.
okay, I think I'm starting to get more comfortable with this kitchen.
I've got transparent status bar, and modified status bar icons.
Now, I'm looking for some help with another graphic. I unlock my phone for use with a pin. I see lockscreen in UOT only seems to modify the icons and gesture styles.
Where can I look to change the color of the numeric pin keys?
Spovik said:
My battery cooking turned out to cause a boot loop so no-go on that. I appreciate any help you can offer and let me know if there's anything I can do to make things easier.
Click to expand...
Click to collapse
It is imperative that you open your rom .zip and extract:
com.htc.resources.apk
framework-res.apk
SystemUI.apk
All are found within your particular rom package. Upload via UOT's upload page. That is how their kitchen knows what to change and give you an individualized .zip to flash. If you want an in-depth explanation, PM me and I would be happy to go through the whole process step-by-step. Once you get the gist, it is easy as pie.
As for the clock, yea...it is under services.jar and UOT does not change that. There can be another way to delete it, if I have time today I will try to make a flashable .zip for just the clock delete--unless someone beats me to it.
Yeah, I went through the UOT guide and video tutorial before I started working with UOT (I really do RTFM) and it still crashed out on me. I'll give it another shot when I have time available and I can get in.
As for the flashable zip, I'd love you long-time.
Spovik said:
Yeah, I went through the UOT guide and video tutorial before I started working with UOT (I really do RTFM) and it still crashed out on me. I'll give it another shot when I have time available and I can get in.
As for the flashable zip, I'd love you long-time.
Click to expand...
Click to collapse
I'm not going to have the time to make a clock delete zip....work is busy and getting ready for the holiday. It's not too hard for someone familiar with the sdk to use smali/etc. To push the needed code.
Sent from my HTC Amaze 4G using xda premium
TheSneakerWhore said:
I'm not going to have the time to make a clock delete zip....work is busy and getting ready for the holiday. It's not too hard for someone familiar with the sdk to use smali/etc. To push the needed code.
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
I've seen some code about it, but didn't know if it's exclusive to the device type, or if it's the same basic thing for gingerbread so I never jumped. I'll see if I can mess with it later this week.
Spovik said:
I've seen some code about it, but didn't know if it's exclusive to the device type, or if it's the same basic thing for gingerbread so I never jumped. I'll see if I can mess with it later this week.
Click to expand...
Click to collapse
As long as you pull the services.jar file out of the Rom you want to flash to, you are fine.
Sent from my HTC Amaze 4G using xda premium
I haven't really played with our modded the icons since 2.3 on my d2g. Where do I find png files to edit for the taskbar and such? Any help appreciated.
Senseless ICS Rezound
gunz.jones said:
I haven't really played with our modded the icons since 2.3 on my d2g. Where do I find png files to edit for the taskbar and such? Any help appreciated.
Senseless ICS Rezound
Click to expand...
Click to collapse
The majority of them will be found in SystemUI.apk and framework-res.apk.
The uot is your friend. just made a nice all red theme ,couple flukes but fixable
sent from my rezound using tapatalk
can anyone help me out? i'm pretty good with uot now however I can't seem to get the signal bars to stop being a light grey as well as the 3g/4g and arrows to change color. im using cleanrom 1.5.5. they rest of the top bar and statusbar was changed but for some reason i cant get anything related to the 3g/4g arrows and indicator as well as the 4 signal bar to go red. i supplied the flashable zip. it's mostly based off the transparent mod but changed a few things to be like a black/clear/red type of theme. any help in getting the other status icons to change color would be greatly appreciated.
dyetheskin said:
can anyone help me out? i'm pretty good with uot now however I can't seem to get the signal bars to stop being a light grey as well as the 3g/4g and arrows to change color. im using cleanrom 1.5.5. they rest of the top bar and statusbar was changed but for some reason i cant get anything related to the 3g/4g arrows and indicator as well as the 4 signal bar to go red. i supplied the flashable zip. it's mostly based off the transparent mod but changed a few things to be like a black/clear/red type of theme. any help in getting the other status icons to change color would be greatly appreciated.
Click to expand...
Click to collapse
The problem is that the 3g and 4g arrows aren't
stat_sys_data_inandout_3g.png or stat_sys_data_inandout_4g.png
they are
stat_sys_data_inandout_3g_lte.png or stat_sys_data_inandout_vzw_lte.png
If you have the icons you want in 3g/4g then copy them over the similarly named 3g_lte and vzw_lte files. Then you'll get what you're looking for. If you want I can edit up your file to show you what I mean.
yeah if you don't mind. I used the uot kitchen so the mistake was on the automatic cooking. only icons that aren't red is the CDMA signal 4 bar,3g with arrows as well as the 4g lte. thanks for the help
sent from my rezound using tapatalk
Never used uot. Always ninjamorph and metamorph and just edit what's pulled apart by hand. Xhdpi folders?
Senseless ICS Rezound
gunz.jones said:
Never used uot. Always ninjamorph and metamorph and just edit what's pulled apart by hand. Xhdpi folders?
Senseless ICS Rezound
Click to expand...
Click to collapse
Xhdpi wasn't an option so I chose hdpi although i did see something about qhd within uot
Edit: rezound uses xhdpi or whatever and I read uot isnt good for icons but everything else works
sent from my rezound using tapatalk
dyetheskin said:
yeah if you don't mind. I used the uot kitchen so the mistake was on the automatic cooking. only icons that aren't red is the CDMA signal 4 bar,3g with arrows as well as the 4g lte. thanks for the help
sent from my rezound using tapatalk
Click to expand...
Click to collapse
I grabbed the file but I can't edit the files without GIMP. I'll beat this up for you tonight if you can wait. Otherwise if you want to try yourself, these are the files that need to be replaced to do 1x, 3G, and 4G on the Rezound.
/system/app/SystemUI.apk/res/drawable-hdpi (and/or drawable-xhdpi)
1X:
stat_sys_data_connected_1x.png
stat_sys_data_inandout_1x.png
stat_sys_data_in_1x.png
stat_sys_data_out_1x.png
3G:
stat_sys_data_connected_3g_lte.png
stat_sys_data_inandout_3g_lte.png
stat_sys_data_in_3g_lte.png
stat_sys_data_out_3g_lte.png
4G:
stat_sys_data_connected_vzw_lte.png
stat_sys_data_inandout_vzw_lte.png
stat_sys_data_in_vzw_lte.png
stat_sys_data_out_vzw_lte.png
thanks I'll try while I wait. I didn't want anything to mess with what uot did so I'll manually patch as I go so everything else is in tact. If I fail then there's always your attempt. which versions of metamorph and ninja do u stick with?
sent from my rezound using tapatalk
dyetheskin said:
thanks I'll try while I wait. I didn't want anything to mess with what uot did so I'll manually patch as I go so everything else is in tact. If I fail then there's always your attempt. which versions of metamorph and ninja do u stick with?
sent from my rezound using tapatalk
Click to expand...
Click to collapse
I'm a hard-head. I do it all manually.
not me cause I can never get the images right and always have trouble dragging and dropping into the apk or recompiling
sent from my rezound using tapatalk
I break it down with morph and drag the work folder to my desktop. Only problem is white icons on a transparent....going through Xhdpi and just getting some basic red updates to match the rest of the phone. Having all blue os and all red and black phone feels off...
Senseless ICS Rezound
I'm tryin this with ginger not ics
sent from my rezound using tapatalk
all I did was copied the systemui to my pc opened with 7zip. dragged the hdpi folder to my pc. edited selected images with paint.net. all i changed was the 4g/3g icon colors,left up/down arrows alone,changed 4 signal bar colors. dragged the files back into the zip within 7zip and pushed systemui and rebooted. first boot killed the status bar but i left it alone for a few minutes. did another reboot and now it seems to be workin great
dyetheskin said:
all I did was copied the systemui to my pc opened with 7zip. dragged the hdpi folder to my pc. edited selected images with paint.net. all i changed was the 4g/3g icon colors,left up/down arrows alone,changed 4 signal bar colors. dragged the files back into the zip within 7zip and pushed systemui and rebooted. first boot killed the status bar but i left it alone for a few minutes. did another reboot and now it seems to be workin great
Click to expand...
Click to collapse
Good deal...
ok I made a transparent theme but the text color is black making it unreadable. i tried following a guide but the 3 xmls it mentioned arent in res/layout, just the expanded one. can someone point me to where or what I need to do. my personal theme is nearly finished once I'm squared away. any help is greatly appreciated
dyetheskin said:
ok I made a transparent theme but the text color is black making it unreadable. i tried following a guide but the 3 xmls it mentioned arent in res/layout, just the expanded one. can someone point me to where or what I need to do. my personal theme is nearly finished once I'm squared away. any help is greatly appreciated
Click to expand...
Click to collapse
What exactly are you trying to do? Which 3 XML files are you looking for?
MrSmith317 said:
What exactly are you trying to do? Which 3 XML files are you looking for?
Click to expand...
Click to collapse
change the default txt in the pulldown from black to white since the entire background is semi transparent. I haven't tried decompiling yet,figured i'd just extract the xmls out of res/layout but I did some reading where hex editing isn't required either. uot kitchen doesn't seem to get certain parts right. probably cause of the ota base
sent from tapatalk on my rezound
dyetheskin said:
change the default txt in the pulldown from black to white since the entire background is semi transparent. I haven't tried decompiling yet,figured i'd just extract the xmls out of res/layout but I did some reading where hex editing isn't required either. uot kitchen doesn't seem to get certain parts right. probably cause of the ota base
sent from tapatalk on my rezound
Click to expand...
Click to collapse
Yeah you need to decompile. Which actually isn't as bad as it sounds. If you have skype, send me a PM and I'll send you my skype name and I can send you my setup and walk you through whatever you need.
Hi Guys,
Before I begin, I'd like to shoutout to all the great devs here in XDA who regularly updates us with their mods while living their own busy lives.
I'm using a ST15i on stock ICS and managed to customize it by reading around. I've rooted my phone from GB to ICS and flashed custom zips to add or modify certain functions and changed how it looks to give it a different feel and to better suit my taste. I've reached a point where I can't modify it anymore due to lack of knowledge and training. And now I'm here.
Can anyone point me on how to change the transparency of the status bar, change the battery icon of my choice on my ST15i running on stock ICS? Also, can you help me in reverting to the stock icon fron "No available network"? All the info I found didn't help me. Tried the kitched but that didn't work for me either. I'd rather learn how rather than be spoonfed.
This is my first time posting here, so go easy on me.
Thanks!
I don't think a transparent statusbar is possible in ICS. In earlier versions, it was just a case of making the statusbar background itself transparent.
But Google have made it harder to do with later versions.
To change the battery icon, you just need to change the png files in one of the drawable folders in either framework-res.apk or SystemUI.apk. With the Mini on ICS, it's most likely drawable-mdpi in SystemUI.apk.
If you want to change how the icon works, going from changing every 10% to every 1% for example, then you need to decompile the app and edit some xml.
It's a little long-winded, but it's simple enough and I'm always happy to help. The battery icon mod was the first one I found out how to do and I spent months trying to figure it out. Literally.
It's worth checking out Tickle My Android from the link in my signature. It can do the battery mod for you, if you want it to, and can handle all the decompiling and recompiling as well actually taking apps off your phone to begin with.
Not sure what you meant about reverting icons..is it possible you can provide a screenshot of what you want to change?
Ticklefish said:
I don't think a transparent statusbar is possible in ICS. In earlier versions, it was just a case of making the statusbar background itself transparent.
But Google have made it harder to do with later versions.
To change the battery icon, you just need to change the png files in one of the drawable folders in either framework-res.apk or SystemUI.apk. With the Mini on ICS, it's most likely drawable-mdpi in SystemUI.apk.
If you want to change how the icon works, going from changing every 10% to every 1% for example, then you need to decompile the app and edit some xml.
It's a little long-winded, but it's simple enough and I'm always happy to help. The battery icon mod was the first one I found out how to do and I spent months trying to figure it out. Literally.
It's worth checking out Tickle My Android from the link in my signature. It can do the battery mod for you, if you want it to, and can handle all the decompiling and recompiling as well actually taking apps off your phone to begin with.
Not sure what you meant about reverting icons..is it possible you can provide a screenshot of what you want to change?
Click to expand...
Click to collapse
Hey there, Ticklefish! Thank you for taking the time to reply. You're one of my favorite devs here in xda.
Could you take a quick peek at this? There's an update on his notification toggle for a transparent status bar so I got me thinking whether this was possible or not. As for the battery, I'll still have to search for the battery icon I'm fancying about or I might have to create it from scratch. Sorry, I forgot to mention this but I tried to use your tool. I just didn't know how the battery icons would look like that's why I chickened out at the last moment. Instead I used it to create a zip to flash a stock SystemUI.apk to remove the Notification Toggles which I had extracted from an earlier CWM backup (Can't find an uninstaller. I figured all I needed was stock to remove it). Great tool, by the way.
I can't post any screenshots at the moment since I haven't been able to add that feature to my Mini yet. So I'll try my best to explain what I meant about reverting the network icon. If you would notice whenever you lose the network signal an icon appears on the notification bar? Well mine used to be color grey and had a yellow exclamation point beside it. Now it's all red. This might not be an issue for some but it's pretty hard on the eyes. I'd like to have the old one back.
Just to give you an idea, I'd like to improve my Mini's functionality and aesthetics while keeping it as close to stock as possible. So far I've managed to:
-Insert Reboot/Reboot to Recovery
-Use Wavelock
-Use Xperia S apps (Alarm, Callscreen, Clock, Conversation, Contacts, Font, Home, Keyboard, Phonebook & Walkman)
-Supercharge
-Notification Toggles (which I removed)
Changing the status bar and reverting to stock icon for no network signal is next on my list.
messagemode said:
Hey there, Ticklefish! Thank you for taking the time to reply. You're one of my favorite devs here in xda.
Could you take a quick peek at this? There's an update on his notification toggle for a transparent status bar so I got me thinking whether this was possible or not. As for the battery, I'll still have to search for the battery icon I'm fancying about or I might have to create it from scratch. Sorry, I forgot to mention this but I tried to use your tool. I just didn't know how the battery icons would look like that's why I chickened out at the last moment. Instead I used it to create a zip to flash a stock SystemUI.apk to remove the Notification Toggles which I had extracted from an earlier CWM backup (can't find an uninstaller. I figured all I needed was stock to remove). Great tool, by the way.
I can't post any screenshots at the moment since I haven't been able to add that feature to my Mini yet. So I'll try my best to explain what I meant about reverting the network icon. If you would notice whenever you lose the network signal a icon appears on the notification bar, well mine used to be color grey and had a yellow exclamation point beside it. Now it's all red. This might not be an issue for some but it's pretty hard on the eyes. I'd like to have the old one back.
Just to give you an idea, I'd like to improve my Mini's functionality and aesthetics while keeping it as close to stock as possible. So far I've managed to:
-Insert Reboot/Reboot to Recovery
-Use Wavelock
-Use Xperia S apps (Alarm, Callscreen, Clock, Conversation, Contacts, Font, Home, Keyboard, Phonebook & Walkman)
-Supercharge
-Notification Toggles (which I removed)
Changing the status bar and reverting to stock icon for no network signal is next on my list.
Click to expand...
Click to collapse
Screenshot should already implimented just not in the power menu. All you have to do is hold power and vol down button.
evilbarcode said:
Screenshot should already implimented just not in the power menu. All you have to do is hold power and vol down button.
Click to expand...
Click to collapse
Wow! Didn't know that. Just tried it just now and it worked. Thanks! Will be posting/updating once I've recreated the situation.
messagemode said:
Hey there, Ticklefish! Thank you for taking the time to reply. You're one of my favorite devs here in xda.
Could you take a quick peek at this? There's an update on his notification toggle for a transparent status bar so I got me thinking whether this was possible or not. As for the battery, I'll still have to search for the battery icon I'm fancying about or I might have to create it from scratch. Sorry, I forgot to mention this but I tried to use your tool. I just didn't know how the battery icons would look like that's why I chickened out at the last moment. Instead I used it to create a zip to flash a stock SystemUI.apk to remove the Notification Toggles which I had extracted from an earlier CWM backup (Can't find an uninstaller. I figured all I needed was stock to remove it). Great tool, by the way.
I can't post any screenshots at the moment since I haven't been able to add that feature to my Mini yet. So I'll try my best to explain what I meant about reverting the network icon. If you would notice whenever you lose the network signal an icon appears on the notification bar? Well mine used to be color grey and had a yellow exclamation point beside it. Now it's all red. This might not be an issue for some but it's pretty hard on the eyes. I'd like to have the old one back.
Just to give you an idea, I'd like to improve my Mini's functionality and aesthetics while keeping it as close to stock as possible. So far I've managed to:
-Insert Reboot/Reboot to Recovery
-Use Wavelock
-Use Xperia S apps (Alarm, Callscreen, Clock, Conversation, Contacts, Font, Home, Keyboard, Phonebook & Walkman)
-Supercharge
-Notification Toggles (which I removed)
Changing the status bar and reverting to stock icon for no network signal is next on my list.
Click to expand...
Click to collapse
Well, it might be possible. There's a lot that can be done if you just know how. I'll have a look at a transparent status bar soon. It was incredibly simple to do on early GB so hopefully it can be done on ICS as well.
There are a lot of battery icons out there. If you find the ones you want, TMA can put them into your app for you, or I can tell you how to do it manually.
As for the icons that come with TMA, you can see what they look like on the thread. Some look better on HDPI, and our phones are MDPI, but the tool can backup your original app so you can just try whichever one you want without being in danger of losing anything.
Changing that icon should be pretty simple. All you need to do is find out which image file it is and change it. Either by downloading one of the GB roms here and taking the new image file out of that, or by using a graphics program and just recolouring it yourself. If you're doing that, and if you're in a creative mood, you could even redesign the icon completely..
Thanks for the kind words, btw. If there's anything I can do to help, just let me know!
Ticklefish said:
Well, it might be possible. There's a lot that can be done if you just know how. I'll have a look at a transparent status bar soon. It was incredibly simple to do on early GB so hopefully it can be done on ICS as well.
There are a lot of battery icons out there. If you find the ones you want, TMA can put them into your app for you, or I can tell you how to do it manually.
As for the icons that come with TMA, you can see what they look like on the thread. Some look better on HDPI, and our phones are MDPI, but the tool can backup your original app so you can just try whichever one you want without being in danger of losing anything.
Changing that icon should be pretty simple. All you need to do is find out which image file it is and change it. Either by downloading one of the GB roms here and taking the new image file out of that, or by using a graphics program and just recolouring it yourself. If you're doing that, and if you're in a creative mood, you could even redesign the icon completely..
Thanks for the kind words, btw. If there's anything I can do to help, just let me know!
Click to expand...
Click to collapse
OK, I won't hold back in asking for assistance anymore.
I've attached a screenie of the icon problem I'm facing right now. If you would look at the upper lefthand corner, it's all red. I wonder if it's the same for the other ST15i Stock ICS users. It' used to be grey with a yellow exclamation point or something like that (can't recall how it exactly looked like but, yeah, something like that). Now for the battery icon, I'm fancying the Purple Android Battery Icon in TMA, only in green and shouldn't mess with the original height of the status bar. I've cooked a battery icon using the kitchen and it messed the height of the status bar. Could you also point how to manually change the battery icon? I'm trying to do it myself so I won't be asking around here anymore. I think others will benefit from it, too.
The stock SystemUI.apk that I've attached came from a stock version of my ST15i's ICS. I wondering if the network icon is found in the framework-res.apk, not in the SystemUI.apk. Since I've flashed the stock one and managed to remove the Notification Toggles but Red icon is still there.
Hopefully, you can find something with the transparency of the status bar. Thanks for all the help!
messagemode said:
OK, I won't hold back in asking for assistance anymore.
I've attached a screenie of the icon problem I'm facing right now. If you would look at the upper lefthand corner, it's all red. I wonder if it's the same for the other ST15i Stock ICS users. It' used to be grey with a yellow exclamation point or something like that (can't recall how it exactly looked like but, yeah, something like that). Now for the battery icon, I'm fancying the Purple Android Battery Icon in TMA, only in green and shouldn't mess with the original height of the status bar. I've cooked a battery icon using the kitchen and it messed the height of the status bar. Could you also point how to manually change the battery icon? I'm trying to do it myself so I won't be asking around here anymore. I think others will benefit from it, too.
The stock SystemUI.apk that I've attached came from a stock version of my ST15i's ICS. I wondering if the network icon is found in the framework-res.apk, not in the SystemUI.apk. Since I've flashed the stock one and managed to remove the Notification Toggles but Red icon is still there.
Hopefully, you can find something with the transparency of the status bar. Thanks for all the help!
Click to expand...
Click to collapse
That icon might be in framework-res.apk but I suspect it's SystemUI.apk. That's where most of those things are. This is a stock icon so flashing a stock system app won't do anything to change it. If you want, you can change the icon yourself by loading the png into a graphics program and messing around with it. If you want it to be grey and yellow, then you can make it grey and yellow.
Battery icons won't change the height of the statusbar. Android automatically scales images to the right size. As long as they're in the right folder. The Mini and Mini Pro both keep their images in drawable-mdpi for ICS. If images are put into drawable-ldpi, drawable-hdpi or even drawable-xhdpi (which would be insane on such a small screen), Android will scale them for a low, high, or extra high resolution screen. Which will mess the statusbar height. Your battery icons can be any height you like, they just have to go in the right place.
By the way...Tickle My Android will automatically put them in the right place. Just saying...
To change battery icons manually, you need to use apktool or a utility that uses apktool to decompile framework-res.apk and SystemUI.apk
Hey....Tickle My Android uses apktool...(subtle, ain't I?)
Then find the battery icons in whichever drawable folder they're in. They might be in more than one but that's not an issue. Replace them with ones you want.
If you're changing how often they change, you'll need to edit the xml files in the layout folder. If you got your icons from a kitchen, they should have come with the right xml files. In fact, if you've got a version of the Purple Android icons, you could use TMA to put those on first and then change them to the icons you want. That'll ensure you get the right xml files.
Then you use apktool to recompile the apps you changed. Make a copy of the original app, use 7zip to copy the res folder from the recompiled app into the copied one (this will ensure it's signed correctly), extract resources.arsc from the recompiled app, add that to the copied one at store levels of compression and..well, that's it.
The copied app is now ready to be put back onto your phone.
Eyes glazing over? Brain leaking out of the ears? I know it sounds complicated but it's quite simple once you've done it a few times. It can get a bit tedious if you're doing it a lot....which is why I wrote Tickle My Android in the first place.
Ok i have searched high and low for months and have not been able to get the stat_sys_signal_null icon to show two icons (animation) instead of just the static i know this worked on the tbolt because i could use UOT and kalagan icons and my signal null icon would become animated. I am not sure if there are some edits that need to be done somewhere else besides the XML and pngs. UOT will not work and decompiling the systemUI hasnt worked. any ideas?
conadg said:
Ok i have searched high and low for months and have not been able to get the stat_sys_signal_null icon to show two icons (animation) instead of just the static i know this worked on the tbolt because i could use UOT and kalagan icons and my signal null icon would become animated. I am not sure if there are some edits that need to be done somewhere else besides the XML and pngs. UOT will not work and decompiling the systemUI hasnt worked. any ideas?
Click to expand...
Click to collapse
Not sure why you would want that but the rezound uses the stat_sys_5signal_null.png... not sure if that helps you solve your problem or not
so in theory if i replace both pngs stat_sys_5signal with a _null0 and _null1 it should show both icons when the phone isnt getting a signal? i think i tried that also but i am fixing to try again. would i create an xml named stat_sys_5signal_null0 and place both icon names to create an animated icon?
I've never looked into this but i will... let me do some research
awesome thanks! i will do some experimenting.
well after nights of hell and your advice i finally got it working using the 5signal icons, i had previously created xmls and two pngs for 6signal and signal null along with 5signal and it didnt work. just finished up now and its working! thanks!!!
Nice, glad you figured it out. I also ended up getting it working too but, I've found no purpose for it since i don't go around with no signal lol
Edit: i see you have no thanks so i'll hook you up with some :highfive:
who MIKE D said:
Nice, glad you figured it out. I also ended up getting it working too but, I've found no purpose for it since i don't go around with no signal lol
Edit: i see you have no thanks so i'll hook you up with some :highfive:
Click to expand...
Click to collapse
lol i am just wierd like that. i remember it from my tbolt and thought it was cool, even though no one see it but me. lol:laugh: