Having trouble rooting my new Gigabyte GSmart Maya M1 - tried 2 times with Bin4ry script, it seems that it runs OK, it reboot my phone, but that's all. Root not done. Can absence of sim card in be the problem?
JB 4.1 OS installed.
Any suggestions?
Thanks.
Another try with sim and microSD card after factory reset - still no results.
Same behaviour
ferrarist75 said:
Another try with sim and microSD card after factory reset - still no results.
Click to expand...
Click to collapse
Hi
Today I can fonfirm that we are not able to make root acces even by Bin4ry_v30 - I have same results - I see sucess message and reboot - but after reboot root access still missing.
Any suggestion what could be tested in next steps??
Thanks a lot for advice anyway!
Prihodak19
Prihodak19 said:
Hi
Today I can fonfirm that we are not able to make root acces even by Bin4ry_v30 - I have same results - I see sucess message and reboot - but after reboot root access still missing.
Any suggestion what could be tested in next steps??
Thanks a lot for advice anyway!
Prihodak19
Click to expand...
Click to collapse
Too bad...
Instructions for flashing CWM and getting root for Gigabyte GSmart Maya M1
Instructions for flashing CWM and getting root for Gigabyte GSmart Maya M1
Before installation, disable anti-virus software (firewall) to avoid possible problems?
1) Copy SuperSU_1.25_CWM.zip to sdcard
2) Extract the driver archive MayaM1_Driver.zip and put the driver manually.
(To verify that the drivers are installed without a problem, open the Device Manager,
connect the phone to your computer turned off, in the ports for a few seconds the device should appear MediaTek),
after checking the phone is disconnected from the computer.
3) Extract the archive MayaM1_SP_Flash_Tool.zip
Run the file from the unpacked folder Flash_tool.exe.
Push the button to open the folder Scatter-loading MT6577_Android_scatter_emmc.txt
and select the file from the folder with the program Flash_tool.
4) Remove the check marks from all items if they are included,
and click on the row and select the file RECOVERY Maya M1_recovery_130515-133513.img.
5) Confirm that the check mark is only on the point RECOVERY and select the correct file, press the button Download,
a warning that not all files are selected clicks Yes to connect your phone off and wait for the end of the process.
Done!
6) Enter the CWM on the phone turned off press Volume + button and the power button,
the first button to keep the entrance to the CWM.
Navigating the CWM to do the following using the volume,
confirmation of the selected item - briefly pressing the power button.
Throw down the file on a flash drive, go to CWM, choose install zip from sdcard,
then select the file and confirm SuperSU_1.25_CWM.zip.
mediafire.com/?42sa0wj38ij07k2
Milan84 said:
Instructions for flashing CWM and getting root for Gigabyte GSmart Maya M1
Before installation, disable anti-virus software (firewall) to avoid possible problems?
1) Copy SuperSU_1.25_CWM.zip to sdcard
2) Extract the driver archive MayaM1_Driver.zip and put the driver manually.
(To verify that the drivers are installed without a problem, open the Device Manager,
connect the phone to your computer turned off, in the ports for a few seconds the device should appear MediaTek),
after checking the phone is disconnected from the computer.
3) Extract the archive MayaM1_SP_Flash_Tool.zip
Run the file from the unpacked folder Flash_tool.exe.
Push the button to open the folder Scatter-loading MT6577_Android_scatter_emmc.txt
and select the file from the folder with the program Flash_tool.
4) Remove the check marks from all items if they are included,
and click on the row and select the file RECOVERY Maya M1_recovery_130515-133513.img.
5) Confirm that the check mark is only on the point RECOVERY and select the correct file, press the button Download,
a warning that not all files are selected clicks Yes to connect your phone off and wait for the end of the process.
Done!
6) Enter the CWM on the phone turned off press Volume + button and the power button,
the first button to keep the entrance to the CWM.
Navigating the CWM to do the following using the volume,
confirmation of the selected item - briefly pressing the power button.
Throw down the file on a flash drive, go to CWM, choose install zip from sdcard,
then select the file and confirm SuperSU_1.25_CWM.zip.
mediafire.com/?42sa0wj38ij07k2
Click to expand...
Click to collapse
No progress after pressing DOWNLOAD in step 5.....
ferrarist75 said:
No progress after pressing DOWNLOAD in step 5.....
Click to expand...
Click to collapse
Press download, then YES, and after that plugin usb cabal in turned off phone.
After green cirkle, unplug cable and go in to recovery. If you just turn on phone you will lose CWM recovery
Milan84 said:
Press download, then YES, and after that plugin usb cabal in turned off phone.
After green cirkle, unplug cable and go in to recovery. If you just turn on phone you will lose CWM recovery
Click to expand...
Click to collapse
Well step 5 works,but when applying update SuperSU_1.25_CWM from sdcard following appears:
Error: Invalid 0TA package, missing scatter
Installation aborted.
ferrarist75 said:
Well step 5 works,but when applying update SuperSU_1.25_CWM from sdcard following appears:
Error: Invalid 0TA package, missing scatter
Installation aborted.
Click to expand...
Click to collapse
Repeat all.
After green cirkle, unplug cable and go in to recovery (power + volume up until the GSmart logo appears).
If you just turn on phone, you will lose CWM recovery. Phone System install default recovery on boot.
You can not flash SuperSu using default recovery. Besause of that you have Error: Invalid 0TA package, missing scatter
Work
It works perfectly THX :good:
Messed flashing - now it's OK
It works - many thanks...
ROM
Do not know where to get a ROM?
Nor me
Tornados911 said:
It works perfectly THX :good:
Click to expand...
Click to collapse
Hi Guys
Sorry fo late reply.
I do not see same But now i thing is mistake betwen keyboard and chair
I have fear that i did something wrong whit driver. I have notebook whit WIN7 , here it is imposible, I took old one whit XP and tried it many times.
In Device manager I see driver whit Composite device - but I if inplug phone off - i didn't see MediTek information...
When iI'm at step 5 - i do not see any gree cyrcle - no information about proceeding or end of proces mark - thing that i have no needed comunication in here based on driver
Do you have any idea what could be wrong?? What OS do you used (Xp SP2 or XP SP3)? Could be relavat that I have CZ localization of OS?
If i tried it on notebook of my coleagued - even after manual reinstal of driver - I see this device still like my HTC. Thing there is some more sub driver which was not rewrite or something
How I can check if I have correctly working driver for sure???
It is my fourth device where i'm do root - worst one.
Thnaks from Czech
Prihodak19 said:
Hi Guys
Sorry fo late reply.
I do not see same But now i thing is mistake betwen keyboard and chair
I have fear that i did something wrong whit driver. I have notebook whit WIN7 , here it is imposible, I took old one whit XP and tried it many times.
In Device manager I see driver whit Composite device - but I if inplug phone off - i didn't see MediTek information...
When iI'm at step 5 - i do not see any gree cyrcle - no information about proceeding or end of proces mark - thing that i have no needed comunication in here based on driver
Do you have any idea what could be wrong?? What OS do you used (Xp SP2 or XP SP3)? Could be relavat that I have CZ localization of OS?
If i tried it on notebook of my coleagued - even after manual reinstal of driver - I see this device still like my HTC. Thing there is some more sub driver which was not rewrite or something
How I can check if I have correctly working driver for sure???
It is my fourth device where i'm do root - worst one.
Thnaks from Czech
Click to expand...
Click to collapse
Já mám Windows 7 Ultimate. Zkontroluj si kam jsi zapojil USB. Na 3.0 (modrá) to nejde a u mě ještě na červených USB to nevím co je za tip. Vypni mobil a připoj k pc a bez problémů by se měl nahrát ovladač.
Pak pokračuj podle návodu.
Mě to bez problému funguje.
Thanks
Tornados911 said:
Já mám Windows 7 Ultimate. Zkontroluj si kam jsi zapojil USB. Na 3.0 (modrá) to nejde a u mě ještě na červených USB to nevím co je za tip. Vypni mobil a připoj k pc a bez problémů by se měl nahrát ovladač.
Pak pokračuj podle návodu.
Mě to bez problému funguje.
Click to expand...
Click to collapse
Ahoj
Takže problém byl asi opravdu v kombinaci SW a vhodného USB...
Z pracovních důvodů jsem byl donucen reinstalovat system = věděl jsem přesně kterou variantu driveru tam mám...
Vynechal jsem USB 3.0 a moje žluté USB (Olways power on) a na oněch dvou 2.0 to funguje.
Asi jsem v prvním kole nepochopil, že po kroku download a YES - se musí zařízení zapnout a vypnout...(ani v jednom z popisů jsem to neviděl)
Takže na základě vašich rad se mi podařilo vše zprovoznit tak jak to má být
Ještě jednou děkuju za radu - tím že to bude i portem USB by mě nenapadlo.
Díky
Thanks a lot for help and advices from everybody from abroad.
Jiri
Work great
Thanks for your effort. Car si!
Stucked
Rooting works perfectly
Has anybody tried to install any new or custom ROM or some new features?
Pozdrav Milanu
works perfectly..
Thank you!
(if maya driver is don't installing; try this: power off phone, connect usb cable and press volume (-) & power button. Maya Driver will now install..)
ferrarist75 said:
No progress after pressing DOWNLOAD in step 5.....
Click to expand...
Click to collapse
Same problem, no progress, can't get "green circle", just indicate charging battery. how to solve this problem?
---------- Post added at 09:01 AM ---------- Previous post was at 08:03 AM ----------
Prihodak19 said:
Ahoj
Takže problém byl asi opravdu v kombinaci SW a vhodného USB...
Z pracovních důvodů jsem byl donucen reinstalovat system = věděl jsem přesně kterou variantu driveru tam mám...
Vynechal jsem USB 3.0 a moje žluté USB (Olways power on) a na oněch dvou 2.0 to funguje.
Asi jsem v prvním kole nepochopil, že po kroku download a YES - se musí zařízení zapnout a vypnout...(ani v jednom z popisů jsem to neviděl)
Takže na základě vašich rad se mi podařilo vše zprovoznit tak jak to má být
Ještě jednou děkuju za radu - tím že to bude i portem USB by mě nenapadlo.
Díky
Thanks a lot for help and advices from everybody from abroad.
Jiri
Click to expand...
Click to collapse
Je v poradku, že mi Win8 rozpozná zariadenie ako "MT68** Preloader" nie ako "MediaTek", ako je uvedené v návode? Nemôžem sa prepracovať k "
After green cirkle, unplug cable and go in to recovery. If you just turn on phone you will lose CWM recovery", no response, no progress, čo robím nesprávne? Vďaka za odpoveď.
jeremywyx said:
Same problem...
Je v poradku, že mi Win8 rozpozná zariadenie ako "MT68** Preloader" nie ako "MediaTek", ako je uvedené v návode?
Click to expand...
Click to collapse
Jako "MT6577 Preloader" ti ho pozná když ho připojíš vypnutý, umožňuje to přístup do systémový části paměti.
MediaTek je to při připojení v zapnutým stavu, dostaneš se do uživatelský paměti, mass storage atd.
Je to myslim i u jiných mobilů s tímhle procesorem.
Hi. I have a Galaxy S6 Edge G925i with OS deleted. The problem is that the PC recognizes it but marks an error, displaying a message that windows has encountered an error and has stopped the device. I only have access to the recovery mode (TWRP) and the "Download" mode, but in neither way the computer recognize it. I already changed the load center and tried on different computers but the same error continues.
Occurs to me to transfer the <rom> wirelessly through TWRP, to flash it, but I think that function is not supported in the recovery. "Maybe it could be enabling the wifi through the recovery terminal, but I think Neither is it possible .
Thank you for any help. Sorry for my english.
View in peripheral manager if all phone drivers is OK. If no, you must update your Samsung driver or change charge circuit.
Don't forget to hit thanks button if helps.
Envoyé de mon SM-A510F en utilisant Tapatalk
solowalker01 said:
View in peripheral manager if all phone drivers is OK. If no, you must update your Samsung driver or change charge circuit.
Don't forget to hit thanks button if helps.
Envoyé de mon SM-A510F en utilisant Tapatalk
Click to expand...
Click to collapse
Thank you.
The drivers are installed correctly. I have another galaxy s6 edge and it connect without any problem. I have also changed the load center but the error is still presented in the same way.
Since the update to android 11 I have been able to use any usb functions on my LG v60 thinq. I can't even connect my phone to my PC via usb.
No usb options show at all when is connect it and in dev options when is select the usb options the screen pops up and disappear la quickly. Has anybody else had this issue and how is it fixed?
I will Try a factory reset