broken cant find any replasment..any help please?
You tried ebay?
sure did..but there is nothing. i found a uk used seller (he sold over 150 digitizers) but no available any more...
i need a digitizer for that phone (zte blade - orange san fransisco or dell).. i only have it for 2 weeks
Probably just as cheap to buy a new phone.
sirios6 said:
sure did..but there is nothing. i found a uk used seller (he sold over 150 digitizers) but no available any more...
i need a digitizer for that phone (zte blade - orange san fransisco or dell).. i only have it for 2 weeks
Click to expand...
Click to collapse
you can find 100% Genuine ZTE Blade Front Fascia + digitizer screen in HERE
Dealsextreme.com
I think this will help you. if it does please THANK me.
Sent from my Blade
Helo.
My gf has ZTE blade, suddenly she wakes up one morning and the digitizer looks like spider net (as ussually noone did that, right...). So this wouldn't be a problem, im IT fan, so the order of new digitizer after a few informations flew to me was placed and the digitize came, even with the tools to replace - it is this one:
ebay
I replaced it and all fitted together, everything was cool, BUT! (here it is, when the trouble starts)
It doesn't recognize touches.
So after the whole summer I had some time to do a little research and found this post in forum on DX site, where they sell the digitizers:
Not valid for ZTE Blade (European) -> Hi all.
I've bought and installed this touch screen. The phone don't recognize it. It doesn't work.
The chip is diferent than the original. The chip's mark of the original screen is synaptics. Although in the screen is printed ZTE like the original.
I suspect that this model is incompatible with the european phone at least.
Click to expand...
Click to collapse
So does anyone know, how to find the correct model? As everyone, I dont want to spend extra money for something not working with my model.
The model of the phone is this one, so with the TFT screen, not the OLED. already rooted.
Can the problem be caused by the phone beiing rooted? I dont believe that.
Thanks all, xda has always been my best hope in unsolvable problems:cyclops:
Try a more recent rom, like Cyanogen 7.2, I think they changed the digitizer in later models.
wbaw said:
Try a more recent rom, like Cyanogen 7.2, I think they changed the digitizer in later models.
Click to expand...
Click to collapse
There is ICS with CM i think, so it's one of the latest. Are there any other suggestions please? Don't tell me,that XDA won't come up with something
you need to find out exactly what chipset it is & if there is a driver in the kernel for it. if it's a standard blade touchscreen (there have been a few different versions) then it should work in recent cm7 or cm9 & most roms based on those. if there is a working kernel driver for the digitizer, then either your new digitizer doesn't work, there is some other fault on the phone, or you connected it wrong.
wbaw said:
you need to find out exactly what chipset it is & if there is a driver in the kernel for it. if it's a standard blade touchscreen (there have been a few different versions) then it should work in recent cm7 or cm9 & most roms based on those. if there is a working kernel driver for the digitizer, then either your new digitizer doesn't work, there is some other fault on the phone, or you connected it wrong.
Click to expand...
Click to collapse
Can hou pls explain, how am i going to find out what chipset i have and wheter my screen is standard? I think the digitizer is.connected properly. Also is there a way to find what drivers do i need for the digitizer? Or where can i finnd my kernels drivera? Thanks a lot for helping.
so the problem sits at the same stage at the time. another birthsday is coming, im playing with a thought to buy a new phone instead - do you think blade 2/3 is worth it? is it equal to this first model comparing price/user output? im aware of the topic non related to the section, but it is still solving the initial problem
Sent from my HTC Desire using xda app-developers app
Shmaic said:
so the problem sits at the same stage at the time. another birthsday is coming, im playing with a thought to buy a new phone instead - do you think blade 2/3 is worth it? is it equal to this first model comparing price/user output? im aware of the topic non related to the section, but it is still solving the initial problem
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
They're pretty good phones for the price but they have basically have no dev support and they are after all Chinese phones. Its better to go for a renowned company
the zte blade digitizers have run out for quite some time now!
---------- Post added at 04:46 PM ---------- Previous post was at 04:30 PM ----------
it's annoying having to post 10 times just to get over limitations... I have confirmed my email address you know!
Related
Hello
I have seen a few posts asking about this and people always kept insecure about any minimal difference between these models.
Today when I was changing the digitizer of a s5830M I realized that on the motherboard it says "s5830i", so I share this evidence which proves that they are absolutely the same in terms of hardware. Hope this clear most doubts. I attach the pic (sorry for the quality, it was taken with the Galaxy i9003).
S5830i, S5830C and S5830M are the same, only regions are different.
Yup same hardware, means firmware also can be same...
I am not electronic at all, but have a doubt, if the motherboard is the same, what about the chips installed on it? are they the same?
Angenit said:
Hello
I have seen a few posts asking about this and people always kept insecure about any minimal difference between these models.
Today when I was changing the digitizer of a s5830M I realized that on the motherboard it says "s5830i", so I share this evidence which proves that they are absolutely the same in terms of hardware. Hope this clear most doubts. I attach the pic (sorry for the quality, it was taken with the Galaxy i9003).
Click to expand...
Click to collapse
Custom rom
Angenit said:
Hello
I have seen a few posts asking about this and people always kept insecure about any minimal difference between these models.
Today when I was changing the digitizer of a s5830M I realized that on the motherboard it says "s5830i", so I share this evidence which proves that they are absolutely the same in terms of hardware. Hope this clear most doubts. I attach the pic (sorry for the quality, it was taken with the Galaxy i9003).
Click to expand...
Click to collapse
:silly:So this means i can install a custom rom for "s5830i" in a s5830M?
Luigy92 said:
:silly:So this means i can install a custom rom for "s5830i" in a s5830M?
Click to expand...
Click to collapse
yup
Vldesco, Yes, they are the same. As mentioned above, letter are only aimed to make a difference about regions.
Sent from my GT-I9003 using xda app-developers app
Repairing the lcd on a S5830mgsmh
I recently aquired this phone and i have been trying to replace the lcd. The orignal one lights up but its all cracked it shows and image and all but its all cracked. The new replacements, I have ordered two so far on ebay for bout 10 dollars each says they are for a s5830 but all i see is an lcd backlight turn on but no image. I put back the original and it displays an image.
Hello, why if these M and i versions are the same, I'm facing the issue that I'm trying to install a custom rom for the i version in the M version, and the cwm says it is a "different" version and it aborts the installation process.... What should I do?? Thanks in advance.
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
_Intel_ said:
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
Click to expand...
Click to collapse
is the phone rooted and if so, is it a custom rom?
How much of it isn't working? And is it just unresponsive or is the display out as well?
I have a strip of my screen the doesn't work that's righty over where the top row of keys is.
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
_Intel_ said:
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
Click to expand...
Click to collapse
So is it just a strip of the screen?
If you really really wanna be able to get it unlocked, Download the correct version of clockwork mod for our phone one that's not touch, has to use the volume rockers and fresh install the rom, Or as a matter of fact, Just boot into whatever recovery you have and clear data/factoryreset, that'll get rid of your lock pin
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Common Hardware Problems on evo3D
Its the hardware. and your carrier should change it at no cost. (Sprint)
fatisis said:
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Click to expand...
Click to collapse
ive had the top bar just under my notification bar non working for a few months now, and its starting to pi$$ me off
I've replaced my digitizer twice myself. I got a cheaper one the first time, and figure that's what I get for trying to go on the cheap. (I was out of warranty). Sorry to say it but it could be that again.
Sent from my shooter using xda app-developers app
I think I don't have a warranty because I've changed it myself. It's my fault...
I think I'll buy a new one... I unscrewed it a while ago so I could see if sth had been misplaced or if the digitizer had scratches or sth like that.
I saw that the ribbon's top had been ripped off right where it bends on top of the LCD... Don't know if that's the problem...
p.s. I live in Greece. My carrier is Cosmote. We don't have Sprint here...
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
toad6386 said:
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I wonder why is there only one part of the touch that doesn't work if the ribbon is like that, in the bending spot...
thank you! i'll try it as soon as i can and i'll get back!
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
fatisis said:
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
Click to expand...
Click to collapse
The last one I got from Amazon is the one I'm using now (about a month old), and spent $20 US on it, which was NOT the cheapest of them. Not knowing the exchange rate right off hand, would venture to say the one you're speaking of is not a "cheap" one. So go for it. Just take your time replacing it and be careful with ALL the ribbon cables. Good luck!
I have bought a Caesar (Hero) H7500+ with mdk6589, could anyone help me getting root access please?
Alex77roma said:
I have bought a Caesar (Hero) H7500+ with mdk6589, could anyone help me getting root access please?
Click to expand...
Click to collapse
We just received this phone as well and will be putting a full review up soon on youtube and the site. It appears the phone is either an OEM or copy (more likely) ZP800H / ZP810. Beyond looks and specs, it installs "ZP800H" drivers when plugged into a PC.
I will have a full video review up soon on the site today and attempt some auto root methods as well.
---------- Post added at 11:42 AM ---------- Previous post was at 10:49 AM ----------
Gizbeat said:
We just received this phone as well and will be putting a full review up soon on youtube and the site. It appears the phone is either an OEM or copy (more likely) ZP800H / ZP810. Beyond looks and specs, it installs "ZP800H" drivers when plugged into a PC.
I will have a full video review up soon on the site today and attempt some auto root methods as well.
Click to expand...
Click to collapse
Okay, the good news is the phone isn't bricked. Bad news is Bin4ry method certainly doesn't work. Tried both normal and special modes.
I bought this phone pre-rooted from MeriMobiles. If by the time i get it (2 weeks give or take) there is no root, i'll be happy to share a dump of the rom to help get it rooted
Caesar A9600
Just received this phone, wondering how I would go about rooting it? I have been told its a clone of the zp900H, however, mine is a quad core.
vault91 said:
Just received this phone, wondering how I would go about rooting it? I have been told its a clone of the zp900H, however, mine is a quad core.
Click to expand...
Click to collapse
It's the OEM version of the ZP810/ZP800H. There doesn't seem to be a root yet.
kuroyume_cl said:
It's the OEM version of the ZP810/ZP800H. There doesn't seem to be a root yet.
Click to expand...
Click to collapse
Actually no, when I connect USB it states zp900H. I also asked someone online and was told that It's a clone of the zp900/H9300+
vault91 said:
Actually no, when I connect USB it states zp900H. I also asked someone online and was told that It's a clone of the zp900/H9300+
Click to expand...
Click to collapse
Interesting. The ZP900H is the same as ZP910. What's the screen resolution in yours? if it is a ZP900H it should be QHD
http://www.zopo-mobile.net/zopo-zp9...u-1g-ram-4g-rom-3g-gps-smart-phone_p4338.html
Screen
Display Size 5.3 Inch
Type IPS screen, capacitive touch screen
Resolution 960 x 540 pixels
Screen Color 16000K Colors
vault91 said:
Screen
Display Size 5.3 Inch
Type IPS screen, capacitive touch screen
Resolution 960 x 540 pixels
Screen Color 16000K Colors
Click to expand...
Click to collapse
That means your phone is an A9600, not an H7500+
http://www.merimobiles.com/caesar-a...roid-4-1-2-dual-camera-1gb-ram_p/meri8002.htm
the H7500+ has a 720p screen.
http://www.merimobiles.com/oem-zopo...-4-1-1-hz-8-0mp-camera-1gb-ram_p/meri7376.htm
Yes, that is what I said I have in my original post, I mentioned the other ones because I'm told mine is pretty much a clone of them at least with regards to size and looks of the phone. It's not too common of a phone, I haven't seen much in the way of information on this phone, just thought it was a very decent phone ( better than my SG2 in most all areas)
My son suggested maybe seeing if I could find information on rooting it, hense my post and question here.
ahhhh, i always forget you can have titles on posts on this forum >_<
I think MT6890 phones are a bit too new, thus the lack of development so far. Should pick up at least enough to get root soon
Its okay. Unfortunately the screen got cracked tonight by accident Messaged the supplier but not sure what they can do for me. I only just got the phone a few days ago. Hopefully I can send it back to get a screen replacement. Thank you for your replies.
Hi, I bought this phone also (h7500+) and I'm very pleased with it, my only problem is the GPS is having a very hard time getting a lock, so I need to root it to modify gps.conf
Anyone find a way yet?
Spaceweed said:
Hi, I bought this phone also (h7500+) and I'm very pleased with it, my only problem is the GPS is having a very hard time getting a lock, so I need to root it to modify gps.conf
Anyone find a way yet?
Click to expand...
Click to collapse
Does your phone come with CWM or just with the stock recovery(3e)? If it has CWM installed, you can root it easily with a flashable zip file.
mke2fs said:
Does your phone come with CWM or just with the stock recovery(3e)? If it has CWM installed, you can root it easily with a flashable zip file.
Click to expand...
Click to collapse
Thanks for the reply. I just checked, and sadly it is the stock recovery (3e). I would try to flash CWM if there was a way, but I don't think there is without a bricking yet.
I also found there is a factory mode for this phone however (pwr + vol dwn) and it contains a plethora of options, problem is, it's all in chinese. I saw an option called GPS, it was followed by chinese characters, so I was too afraid to select anything.
i just rooted my phone H7500+
Spaceweed said:
Thanks for the reply. I just checked, and sadly it is the stock recovery (3e). I would try to flash CWM if there was a way, but I don't think there is without a bricking yet.
I also found there is a factory mode for this phone however (pwr + vol dwn) and it contains a plethora of options, problem is, it's all in chinese. I saw an option called GPS, it was followed by chinese characters, so I was too afraid to select anything.
Click to expand...
Click to collapse
i saw your request to root the phone erlier today, and i have just managed to root mine.
take a look on this link, it has a detiled guide on how to root the phone.
gizbeat[dot]com/2002/tutorial-how-to-root-mtk6589
have a nice day.
p.s. since im new to this forum, i cant post links to external sites, just remove the [dot] from the link and replace it with . and it should lead you to the website.
How did you manage to crack the screen? Is this a glass screen by the way?
I really like my H7500+, have it since March 19 and I really love the extremely great WiFi coverage. The GPS works with mine, takes about 2 to 3 minutes to get a sat lock. I tried Sygic today, just on my way home (walking) and the signal from the satellites seem to be strong enough.
great phone, a bit heavy, true, yet still a great phone.
StardustOne said:
How did you manage to crack the screen? Is this a glass screen by the way?
I really like my H7500+, have it since March 19 and I really love the extremely great WiFi coverage. The GPS works with mine, takes about 2 to 3 minutes to get a sat lock. I tried Sygic today, just on my way home (walking) and the signal from the satellites seem to be strong enough.
great phone, a bit heavy, true, yet still a great phone.
Click to expand...
Click to collapse
I think because H7500+ it neither gorilla or ogs so you gotta be really careful. It's just a normal glass. you gotta be very gentle with it and put on a case
i found this:
gizbeat.com/2002/tutorial-how-to-root-mtk6589
if this helps anyone?...
Is it possibe to get the files from other source ? The link does not really work for me,...
Thank you for help.
Best regards
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
veer.killerboy said:
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
Click to expand...
Click to collapse
Friend getting it replaced wont be the wisest decision, I would suggest you to try some other ROMs like ASOP CM10.2 version and see if the problem persists, since the lights are working. Hope if that dosent work replacing the LDC will take some thing around Rs 8000 Indian. I don't know about the make of the Sceen, but I guess going to the collection point might just help, else if you can get it to Bhopal or some thing.
Don't risk dis-assemble it, if you are not sure what you are doing .
Well getting the LCD+Digitizer from ebay I just don't know since it hard to find the OEM version ...
Good news !!!
ethanon said:
Friend getting it replaced wont be the wisest decision, I would suggest you to try some other ROMs like ASOP CM10.2 version and see if the problem persists, since the lights are working. Hope if that dosent work replacing the LDC will take some thing around Rs 8000 Indian. I don't know about the make of the Sceen, but I guess going to the collection point might just help, else if you can get it to Bhopal or some thing.
Don't risk dis-assemble it, if you are not sure what you are doing .
Well getting the LCD+Digitizer from ebay I just don't know since it hard to find the OEM version ...
Click to expand...
Click to collapse
:victory: Thanks a lot for reply friend, I think there is some problem in ELEGANCIA as I switched tp CM10.2 it works again normally, Now I am sure that it's not HARDWARE PROBLEM, its SOFTWARE. :good:
OBSERVATIONS OF CAPACITIVE BUTTON :
1. In ELEGANCIA works for 12 hrs(Approx)
switched to CM10.2, They working again... :good: :laugh: :victory:
veer.killerboy said:
:victory: Thanks a lot for reply friend, I think there is some problem in ELEGANCIA as I switched tp CM10.2 it works again normally, Now I am sure that it's not HARDWARE PROBLEM, its SOFTWARE. :good:
OBSERVATIONS OF CAPACITIVE BUTTON :
1. In ELEGANCIA works for 12 hrs(Approx)
switched to CM10.2, They working again... :good: :laugh: :victory:
Click to expand...
Click to collapse
Good to know it worked .
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Oculle said:
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Click to expand...
Click to collapse
As far as I know, ghost touch is almost always a digitizer hardware problem, but I stand to be corrected on that. Have you tried pulling the battery and leaving the phone off for a while (15+ minutes)?
Hai Karate said:
As far as I know, ghost touch is almost always a digitizer hardware problem, but I stand to be corrected on that. Have you tried pulling the battery and leaving the phone off for a while (15+ minutes)?
Click to expand...
Click to collapse
yes, i tried, and nothing has changed
any other ideeas?
Oculle said:
yes, i tried, and nothing has changed
any other ideeas?
Click to expand...
Click to collapse
I don't think you have that many options. Here are the things I would try, in order:
- Open the phone and disconnect the screen from the motherboard, then reconnect it
- Factory reset (back up the phone with LG Backup, or TWRP if you have a model that supports it)
- Replace the screen
I have a feeling that a factory reset isn't going to do much of anything, but it's worth trying before you spend money on a new screen.
Re: ghost touch
I had mine doing the same thing, I'm on a h820 however the screens weren't different amongst the variants as far as I know. Was able to get an oem replacement on Amazon for like 68$. The install wasn't all too difficult and did alleviate the ghost touch. Mine was bad bad before changing out the screen. Like it would press and hold the home button or the back button and make the phone unusable. No problems with the new screen so far.
Here's a link to the one I bought. It was two numbers off from the original one on the underside of the screen where the LG info is stamped.
Well it won't let me post the link.. Not enough posts. But it was from a US seller and said oem in the listing title.
Oculle said:
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Click to expand...
Click to collapse
have you tried the touch screen calibration settings?