Related
I was getting 15-20 second gps locks when I had radio .40 and DCD 3.2.6, but as soon as I upgraded the radio and DCD then it's taking like over 7-9 minutes to get a lock. Sometimes it won't lock at all anymore unless I do a hard reset on the phone. I'm not sure what happened. Does anybody have any ideas? Look at my signiture below for my current configuration.
What's the best Radio and ROM to use right now with the least amount of problems, etc.? I was looking at the V2.2 heavy and light, but I'm not sure if I really understand much about what they are about or the differences in what I have now. I think my biggest problem is with text messaging. If I do it a lot I have to keep restarting my phone because the memory goes down to zero in no time at all. Infact, I have to keep constantly clearing the memory if I use any programs at all. Thanks for your help and time!
Try either 3.3.4 or 3.2.6. I prefer 3.3.4
after all of my testing i ended up sticking with 3.2.6. did you do the aGPS fix? have you checked the QPST settings since your flash? generally, these settings should stick, but in some cases; such as when you need a new a-key, these settings are lost. my last flash removed all my QPST settings and i couldnt lock until i did the aGPS fix again with the updated IP address and port.
Well, in the past it kept all the information after I did the upgrade, so I just assumed it still did. I didn't need a new A-Key. I guess I'll check the QPST settings and do the aGPS fix again. It's been so long ago since I did all the GPS stuff I can't remember what I did and didn't do. I still do get locks but they take forever now and sometimes I don't get them until I restart the phone.
Why are you sticking with 3.2.6? Why don't you like 4.1.2 or 2.2 heavy or light? I've always had the memory problem where if I use programs it just eats up my memory and I don't get most of it back after exiting the software, and if I use my text messaging then my memory just goes down to zero in no time flat and I can't recover it unless I'm constatly restarting my phone. There must be some kind of fix for this. Please let me know. Thanks.. Steve
kflipproductions said:
after all of my testing i ended up sticking with 3.2.6. did you do the aGPS fix? have you checked the QPST settings since your flash? generally, these settings should stick, but in some cases; such as when you need a new a-key, these settings are lost. my last flash removed all my QPST settings and i couldnt lock until i did the aGPS fix again with the updated IP address and port.
Click to expand...
Click to collapse
the QPST settings have changed, so if you did it a while ago you probably just need to update it. youll be locking again after that. ive tested all of dcds roms quite a bit, and always ended up back at 3.2.6 or 3.2.5. im really happy with the speed and everything works exactly as it should. i have a pretty heavy today screen load as well as running several apps at the same time. i didnt like the 4.x.x roms for a couple of reasons. the unread text message thing bugged me alot. i also had a problem with random hard resets, which i was not a fan of.
kflipproductions said:
the QPST settings have changed, so if you did it a while ago you probably just need to update it.
Click to expand...
Click to collapse
Are the changes in the AGPS thread?
yes they are
Oh, really? Then that's probably part of the problem. I changed them maybe a year ago or longer. I tried running QPST to check and it's giving me an error message when I start it, so I'm going to have to try to reinstall it and see if that fixes it. Also, the links for the pictures are dead and they aren't coming up anymore, it makes it harder to figure it out.
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
I ran the Serf Telus aGPS Provisioning CAB file and that seemed to help. I sometimes get locks under 1 minute now, but sometimes it won't lock at all and I have to keep soft booting the phone to get it working.
Oh, so that's why my phone keeps resetting? It's not hard resetting I think it's just soft resetting. At first I didn't like the unread text message thing, but now I do because I get a lot of text messages and when I go to read them it doesn't mark them all as read in the group and I can read them when I get a chance.
I still had the memory issues with the 3.2.6 ROM with my memory going down to nothing, especually when I did text messages, I had to keep restarting my phone. That's been a problem I had with all my ROMs. I wonder why that is? Could it be the version of the MMS software I'm using? Is it the latest version?
Maybe I should go to the MR1 ROM? I still will be able to use the GPS and the WiFiRouter software with it right? Maybe that will solve all my problems? What about the 2.2 light and heavy ROMs? Does anybody know anything about those? Thanks for your help and time...
kflipproductions said:
the QPST settings have changed, so if you did it a while ago you probably just need to update it. youll be locking again after that. ive tested all of dcds roms quite a bit, and always ended up back at 3.2.6 or 3.2.5. im really happy with the speed and everything works exactly as it should. i have a pretty heavy today screen load as well as running several apps at the same time. i didnt like the 4.x.x roms for a couple of reasons. the unread text message thing bugged me alot. i also had a problem with random hard resets, which i was not a fan of.
Click to expand...
Click to collapse
Well, I uninstalled QPST and reinstalled it and it worked this time without any error messages. It seems if I don't use it for a while it gives me a error message if I try to use it again and I have to uninstall it and reinstall it and then it works OK. I don't remember the error message, but I think it's something about can't find a server or something.
Anyways, you were right about the information I had being old and not correct. I had 66.174.95.132 and 8888 instead of PDE IP Address: 216.198.139.92 and PDE Port Number: 8889. I corrected it and it still seems to take about 56 seconds to get a lock, but hopefully now it will be more reliable in getting the locks. I seem to remember in the past getting locks in less then 10-15 seconds, and I wonder why I can't get locks like that anymore.
Thanks for the help!
Well, I was wrong, I'm getting 15-20 second locks now and I'm getting twice the satalites, up too like 9 satelites and I was getting 1/2 that before and it's a lot more accurate now. Before when I was using Google Maps, I could see it was off like about 50-75ft, but now it's spot on, on my location. Hopefully someone knows the answers to some of my previous questions and can get back to me. Thanks..
I too was having this same exact problem and I had to update the QPST IP address and port again. Mine had reverted to the same thing that Apota's had, with the exception of my default port being 8888. All is working well now that I reset the QPST IP address. I get 6-8 sats and locks in about 10 seconds.
I had been experimenting with some of the RyanMogul's new ROMs when this broke for me. I tried 2.1 light and it stopped working. I'm currently running 1.1 light with it functioning after reusing QPST.
DustinEarnhardt said:
I too was having this same exact problem and I had to update the QPST IP address and port again. Mine had reverted to the same thing that Apota's had, with the exception of my default port being 8888. All is working well now that I reset the QPST IP address. I get 6-8 sats and locks in about 10 seconds.
I had been experimenting with some of the RyanMogul's new ROMs when this broke for me. I tried 2.1 light and it stopped working. I'm currently running 1.1 light with it functioning after reusing QPST.
Click to expand...
Click to collapse
I just upgraded to the v2.2 light. I think I'm going to have to get use to it because the interface is so different, but I got a GPS lock with my TomTom GPS software in about 4 seconds. I couldn't believe it. I haven't seen a lock that fast before. It's really awesome! LOL
I have a problem with with connectivity of my phone. I will have full 3g service but at times will not be able to load anything on the web. To correct this I have to continuously refresh till it connects or reboot my phone. On average this happens 2-3 times a day (usually will start to connect after I refresh the page a few times) and requires a reboot to correct about 2-3 times a week. I have had this problem while completely stock and while running various custom roms. I have called "tech" support at T-Mobile and so far they have been no help. They gave me a new sim, reset my service twice, master reset my phone, and told me to switch to Edge every time it happens to see if that helps. So far nothing. My local store said they are fixing the towers around my area because we are not seeing the speeds we should, but this happens on any location I am in around the city.
Is anyone else having this problem? Any help to fix this would be awesome!
Another, maybe associated problem, is I am not able to download any files to my phone. When trying to do so from any download site, when I select download nothing happens. I have Astro and have it selected to allow. When it does randomly decide it will download the file it will only download about 180kb and say its finished when the file is 180mb. Any ideas on why this is happening again would be awesome. Right now I am using Bionix 9 and have no problems with anything else. This happens no matter what rom I am using just like the connection problems.
If this has been answered already I am sorry but I could not find it just direct me that way and close this thread. I usually find what I need without posting as you can see from the lack of posts lol. Thanks again all!
I have the same problem. For example I will have full bars on 3g and market will say something about no network connection
Sent from my SGH-T959 using XDA App
I've had the same problem as well. Tmobile said to get a new SIM card, which i did. It helped a little bit, but every once in a while it will lose its connection. They are sending me a new phone, since I threatened to cancel service. I'm really hoping froyo will fix this problem.
Hi! I'm having serious problems with the wifi on my phone in stock global 2.1. Two weeks or so ago it started to not connect (or better say not initialize) to wifi, giving "Unable to start wifi..." message. Sometimes it connected and a while after it wouldn't let me continue browsing, connecting to Market or refreshing Facebook widget, although it still being as connected.
I decided first to restore my phone to defaults, but that did not work. Then I reflashed using X10 Flash Tool, but again with the same problems. So after that I decided to flash using PC Companion (thinking that this may miraculously resolve all). Now I'm here suffering from an "unable to connect" phone.
I've taken a log using dmesg just after this problems have come up. maybe there could be an answer to this. I'f there's a better way to log this, please tell me.
Any advice?
"2.815328] Using very old AMSS modem firmware."
Is the issue just at home or out and about?
Sorry but I don´t understand what you mean. Looking at that log it seems that something goes wrong and it shuts down just after trying to init:
"<4>[ 51.871484] ar6000_readwrite_file: file /sys/devices/platform/msm_sdcc.2/detect_change filp_open error -2"
Also, you can see this more clearly from:
"<4>[ 6163.536082] Normal WIFI mode." (line 2361)
_SpAiK_ said:
Sorry but I don´t understand what you mean.
Click to expand...
Click to collapse
I don't understand what it means either, which is why I asked if it's just at home or out and about.
Doh! Sorry, it happens everywhere. I've tried in open and secured wifis.
Hi, this looks like the issue I have, did you had any luck fixing it?
http://forum.xda-developers.com/showthread.php?p=12882017
Hi, yesterday I managed to have wifi working for at least an hour, when it normally lasts few minutes before it freezes. It was set to "never" in the "disable wifi policy", so I went to dinner and when I was back it was disconnected. Then it was not capable of getting connection again.
I have Blade Wifi Fix installed and it seems to do something. Anyway you could try to set wifi to static ip, let it connect and wait until freezes, then set it to automatic ip and reconnect. It worked for me, at least for a while. I may try again and post a logcat.
Anyway there's another threat here (see second page) where I have some more info about the problem.
Hey any luck figuring out the problem? Im still without Wi-Fi
i just recently flashed the comrom v.0.1 but then my phone wouldnt connect to 3g. it could make calls and connect to wifi, but doesnt connect to 3g. after i got off from a call i received, it was connected to 3g for about 10 seconds, but went back to normal after 10 seconds. I did flash the ec09 modem/radio, but still the same problem. Thank you for your help
I've been experiencing similar problems but with Com rom 2.1, however my 3g data is sporadic at best, I'll have data for a few minutes then it will drop, then I'll get it back a handful of seconds, sometimes even minutes later, it's rather annoying since it prevents me from doing even the simplest of tasks with my phone. I've tried flashing to the EC09 modem hoping that it was an issue with the modem but it looks like it probably isn't. I've heard that it could possibly be fixed by doing an ESN swap, but then again the results were mixed, it worked for some, and then for others it'd do absolutely nothing.
and how will i do that? and my phones not connecting to 1x nor 3g,
I have had very good results with dialing *22899 send, it doesn't do the voice, after it rings press option 2. Let it finish, you'll get a commit successful message and have to let phone reboot. After it reboots do it a second time, it says it set lock code and.lock password, idk what those are, but 3g works really good for me after that.
Sent from my EC09 UKB GB Fascinate.
DaleV said:
I have had very good results with dialing *22899 send, it doesn't do the voice, after it rings press option 2. Let it finish, you'll get a commit successful message and have to let phone reboot. After it reboots do it a second time, it says it set lock code and.lock password, idk what those are, but 3g works really good for me after that.
Sent from my EC09 UKB GB Fascinate.
Click to expand...
Click to collapse
If this doesn't work try pulling the battery as well.
If that still doesn't work you may have to go this route:
http://forum.xda-developers.com/showpost.php?p=15399649&postcount=25
I know I wrote this based upon the assumption that the issue was the conversion to MTD, however that may not be the case. Before trying this, if you post a logcat I can look at it and tell you if you are having the same issue that I was.
Jp
and how would i post a logcat?
i think this is the logcat you were asking about, i didnt know which portion you needed, so i posted all.
Well, I can tell you that you are not having the same issue that I experienced. So, I don't expect that re-activating your phone using the method I described will have any effect. If all else fails, you are welcome to try it but I don't anticipate that it'll work.
From looking at your logcat, I saw a connection attempt that failed and a second that appeared to be successful. I could be wrong about the second one as I am still trying to figure out exactly what I'm looking at. Someone with a little more experience may be able to get more out of your log.
Sorry I couldn't be more helpful.
Jp
The short of it is, my Wifi crapped out for reasons beyond my experiences thus far.
The long of it. I flashed epinter's 07/25/2012 Nightly and everything seemed to be working nicely, Wifi especially. Then today, out running errands and dropped my Atrix in my Car Dock and attempted to turn on Bluetooth for the first time since flashing, and the device froze then restarted. Once back up, I tried turning Wifi back on, and the device froze again and restarted. Thinking maybe the radio driver went south, I grabbed epinter's 07/27/2012 build (epinter-cm10-20120727_1846-UNOFFICIAL-olympus.zip), and still no luck. Back into Recovery, Wiping everything and also factory resetting then flashing twice over again, boot up, still no wifi, and if it manages to seemingly fire up, the device hangs and restarts.
Within the last 2 hours (Been at this for about 12 hours now.) I grabbed Jokersax's build (Beta 0.1.0), wiped/reset/flash twice as I have before. Now as I take a breath I noticed that the Wifi Icon came up in the Notification bar, but when I go into Settings and Scan, I see none of the Networks around me. I looked under Advanced and noticed that my MAC Address is 'Unavailable' nor am I showing an IP address, even though Wifi is saying 'On'. Verified on my Router, my Phone is not connected to it.
Odd Side note, installed aLogcat just to see if I could catch any errors, and it is not giving me anything, that is, I am not seeing any logs through the app. Most likely an unrelated issue, but still a tad annoying.
Everything else seems in order, including Mobile Data (Able to access Web Pages, Market/Play Store, receive email, etc.). Just Wifi pretty much 'Lights are on, but no one is Home.'. Any suggestions on next steps?
We discussed this issue over in some other threads and conclusion is that it's a hardware malfunction Ur broadcom chip is burned,many people (including me) had that problem.
Sent from my MB860 using xda app-developers app
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
try making a clean install and you'll se that you won't have that problem!
Stark5 said:
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
Click to expand...
Click to collapse
I can't search the threads right now as i am typing from my phone-search is limited to 20-30 posts... But keywords for ur search should be : "atrix wifi error" or "wifi and bluetooth error on atrix" Several forums have this kinda threads,not just xda unfortunately ... seems like it's very often malfunction on this lovely phone. I couldn't repair my previous atrix so i bought another one.
Sent from my MB860 using xda app-developers app
imarmand said:
try making a clean install and you'll se that you won't have that problem!
Click to expand...
Click to collapse
We're talking fastboot wipe kind of clean install? Going to give that a go as a last attempt, will post results here.
Glimmer of hope tonight, was discussing the problem with a friend, went to turn on WiFi and it actually scanned and connected for about 2 minutes before crapping out. This tells me there maybe life to the chip still. Now to get fastboot to connect and try a wipe and see what happens.
Sent from Xoom running cm10
Any news on this front? I am one of the afflicted as well.
I'm having a similar issue. though my BT works just fine, no delays, no errors, no intermittance.
Wifi, I can scan for networks just fine. i click on mine to connect. it shows connecting, noting that when it says connecting the signal shows 1 bar as compared to the full set of wifi bars when scanning, i am also right next to the AP. is tries connceting for about 20 seconds or so. then goes back to saying "saved" under the SSID, other networks showing "disabled" when this happens. i originally noticed this after flashing epinters cm10. i tried flashing 37p, 36p and 30p radios with no difference.
EDIT: also want to note that i HAVE disabled the "avoid poor connections" option. and have tried setting static IP.
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
johnmartin1981 said:
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
Click to expand...
Click to collapse
Mine works occasionally so I don't think the radio is dead. The rom just acts like it's not there most of the time and doesn't give a mac address. Sometimes it works though after a reboot. Would flashing a different radio help? My baseband version says N_01.77.37P
I had an IP and a MAC, but no wifi internet.
Using mobile data, I downloaded Set DNS and then enabled wifi, works fine.
Now it's working but mobile data is going very very slow, it took 5min to download Set DNS.
I have a skyrocket but the "no wifi" issue is probably the same - your not getting DNS
I'm going back to CM9 for now.
+1 wifi matter under CM10
Try rebooting the router.
Experienced same issue (unable to connect, showing full bars, dropping to 1 bar when connecting and never being able to complete a connection) rebooting my router has fixed the issue. I'm not technical but it might have to do with the DNS release for addresses .. in any case unplugging my router for a bit and restarting it fixed the issue for me.