i just recently flashed the comrom v.0.1 but then my phone wouldnt connect to 3g. it could make calls and connect to wifi, but doesnt connect to 3g. after i got off from a call i received, it was connected to 3g for about 10 seconds, but went back to normal after 10 seconds. I did flash the ec09 modem/radio, but still the same problem. Thank you for your help
I've been experiencing similar problems but with Com rom 2.1, however my 3g data is sporadic at best, I'll have data for a few minutes then it will drop, then I'll get it back a handful of seconds, sometimes even minutes later, it's rather annoying since it prevents me from doing even the simplest of tasks with my phone. I've tried flashing to the EC09 modem hoping that it was an issue with the modem but it looks like it probably isn't. I've heard that it could possibly be fixed by doing an ESN swap, but then again the results were mixed, it worked for some, and then for others it'd do absolutely nothing.
and how will i do that? and my phones not connecting to 1x nor 3g,
I have had very good results with dialing *22899 send, it doesn't do the voice, after it rings press option 2. Let it finish, you'll get a commit successful message and have to let phone reboot. After it reboots do it a second time, it says it set lock code and.lock password, idk what those are, but 3g works really good for me after that.
Sent from my EC09 UKB GB Fascinate.
DaleV said:
I have had very good results with dialing *22899 send, it doesn't do the voice, after it rings press option 2. Let it finish, you'll get a commit successful message and have to let phone reboot. After it reboots do it a second time, it says it set lock code and.lock password, idk what those are, but 3g works really good for me after that.
Sent from my EC09 UKB GB Fascinate.
Click to expand...
Click to collapse
If this doesn't work try pulling the battery as well.
If that still doesn't work you may have to go this route:
http://forum.xda-developers.com/showpost.php?p=15399649&postcount=25
I know I wrote this based upon the assumption that the issue was the conversion to MTD, however that may not be the case. Before trying this, if you post a logcat I can look at it and tell you if you are having the same issue that I was.
Jp
and how would i post a logcat?
i think this is the logcat you were asking about, i didnt know which portion you needed, so i posted all.
Well, I can tell you that you are not having the same issue that I experienced. So, I don't expect that re-activating your phone using the method I described will have any effect. If all else fails, you are welcome to try it but I don't anticipate that it'll work.
From looking at your logcat, I saw a connection attempt that failed and a second that appeared to be successful. I could be wrong about the second one as I am still trying to figure out exactly what I'm looking at. Someone with a little more experience may be able to get more out of your log.
Sorry I couldn't be more helpful.
Jp
Related
I was getting 15-20 second gps locks when I had radio .40 and DCD 3.2.6, but as soon as I upgraded the radio and DCD then it's taking like over 7-9 minutes to get a lock. Sometimes it won't lock at all anymore unless I do a hard reset on the phone. I'm not sure what happened. Does anybody have any ideas? Look at my signiture below for my current configuration.
What's the best Radio and ROM to use right now with the least amount of problems, etc.? I was looking at the V2.2 heavy and light, but I'm not sure if I really understand much about what they are about or the differences in what I have now. I think my biggest problem is with text messaging. If I do it a lot I have to keep restarting my phone because the memory goes down to zero in no time at all. Infact, I have to keep constantly clearing the memory if I use any programs at all. Thanks for your help and time!
Try either 3.3.4 or 3.2.6. I prefer 3.3.4
after all of my testing i ended up sticking with 3.2.6. did you do the aGPS fix? have you checked the QPST settings since your flash? generally, these settings should stick, but in some cases; such as when you need a new a-key, these settings are lost. my last flash removed all my QPST settings and i couldnt lock until i did the aGPS fix again with the updated IP address and port.
Well, in the past it kept all the information after I did the upgrade, so I just assumed it still did. I didn't need a new A-Key. I guess I'll check the QPST settings and do the aGPS fix again. It's been so long ago since I did all the GPS stuff I can't remember what I did and didn't do. I still do get locks but they take forever now and sometimes I don't get them until I restart the phone.
Why are you sticking with 3.2.6? Why don't you like 4.1.2 or 2.2 heavy or light? I've always had the memory problem where if I use programs it just eats up my memory and I don't get most of it back after exiting the software, and if I use my text messaging then my memory just goes down to zero in no time flat and I can't recover it unless I'm constatly restarting my phone. There must be some kind of fix for this. Please let me know. Thanks.. Steve
kflipproductions said:
after all of my testing i ended up sticking with 3.2.6. did you do the aGPS fix? have you checked the QPST settings since your flash? generally, these settings should stick, but in some cases; such as when you need a new a-key, these settings are lost. my last flash removed all my QPST settings and i couldnt lock until i did the aGPS fix again with the updated IP address and port.
Click to expand...
Click to collapse
the QPST settings have changed, so if you did it a while ago you probably just need to update it. youll be locking again after that. ive tested all of dcds roms quite a bit, and always ended up back at 3.2.6 or 3.2.5. im really happy with the speed and everything works exactly as it should. i have a pretty heavy today screen load as well as running several apps at the same time. i didnt like the 4.x.x roms for a couple of reasons. the unread text message thing bugged me alot. i also had a problem with random hard resets, which i was not a fan of.
kflipproductions said:
the QPST settings have changed, so if you did it a while ago you probably just need to update it.
Click to expand...
Click to collapse
Are the changes in the AGPS thread?
yes they are
Oh, really? Then that's probably part of the problem. I changed them maybe a year ago or longer. I tried running QPST to check and it's giving me an error message when I start it, so I'm going to have to try to reinstall it and see if that fixes it. Also, the links for the pictures are dead and they aren't coming up anymore, it makes it harder to figure it out.
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
I ran the Serf Telus aGPS Provisioning CAB file and that seemed to help. I sometimes get locks under 1 minute now, but sometimes it won't lock at all and I have to keep soft booting the phone to get it working.
Oh, so that's why my phone keeps resetting? It's not hard resetting I think it's just soft resetting. At first I didn't like the unread text message thing, but now I do because I get a lot of text messages and when I go to read them it doesn't mark them all as read in the group and I can read them when I get a chance.
I still had the memory issues with the 3.2.6 ROM with my memory going down to nothing, especually when I did text messages, I had to keep restarting my phone. That's been a problem I had with all my ROMs. I wonder why that is? Could it be the version of the MMS software I'm using? Is it the latest version?
Maybe I should go to the MR1 ROM? I still will be able to use the GPS and the WiFiRouter software with it right? Maybe that will solve all my problems? What about the 2.2 light and heavy ROMs? Does anybody know anything about those? Thanks for your help and time...
kflipproductions said:
the QPST settings have changed, so if you did it a while ago you probably just need to update it. youll be locking again after that. ive tested all of dcds roms quite a bit, and always ended up back at 3.2.6 or 3.2.5. im really happy with the speed and everything works exactly as it should. i have a pretty heavy today screen load as well as running several apps at the same time. i didnt like the 4.x.x roms for a couple of reasons. the unread text message thing bugged me alot. i also had a problem with random hard resets, which i was not a fan of.
Click to expand...
Click to collapse
Well, I uninstalled QPST and reinstalled it and it worked this time without any error messages. It seems if I don't use it for a while it gives me a error message if I try to use it again and I have to uninstall it and reinstall it and then it works OK. I don't remember the error message, but I think it's something about can't find a server or something.
Anyways, you were right about the information I had being old and not correct. I had 66.174.95.132 and 8888 instead of PDE IP Address: 216.198.139.92 and PDE Port Number: 8889. I corrected it and it still seems to take about 56 seconds to get a lock, but hopefully now it will be more reliable in getting the locks. I seem to remember in the past getting locks in less then 10-15 seconds, and I wonder why I can't get locks like that anymore.
Thanks for the help!
Well, I was wrong, I'm getting 15-20 second locks now and I'm getting twice the satalites, up too like 9 satelites and I was getting 1/2 that before and it's a lot more accurate now. Before when I was using Google Maps, I could see it was off like about 50-75ft, but now it's spot on, on my location. Hopefully someone knows the answers to some of my previous questions and can get back to me. Thanks..
I too was having this same exact problem and I had to update the QPST IP address and port again. Mine had reverted to the same thing that Apota's had, with the exception of my default port being 8888. All is working well now that I reset the QPST IP address. I get 6-8 sats and locks in about 10 seconds.
I had been experimenting with some of the RyanMogul's new ROMs when this broke for me. I tried 2.1 light and it stopped working. I'm currently running 1.1 light with it functioning after reusing QPST.
DustinEarnhardt said:
I too was having this same exact problem and I had to update the QPST IP address and port again. Mine had reverted to the same thing that Apota's had, with the exception of my default port being 8888. All is working well now that I reset the QPST IP address. I get 6-8 sats and locks in about 10 seconds.
I had been experimenting with some of the RyanMogul's new ROMs when this broke for me. I tried 2.1 light and it stopped working. I'm currently running 1.1 light with it functioning after reusing QPST.
Click to expand...
Click to collapse
I just upgraded to the v2.2 light. I think I'm going to have to get use to it because the interface is so different, but I got a GPS lock with my TomTom GPS software in about 4 seconds. I couldn't believe it. I haven't seen a lock that fast before. It's really awesome! LOL
first: sometimes while texting i get and SMS Error and it wont send my text.
Says: "General Problems"
if i click details then it says: Cause code: 65535
error class 3
sometimes i just restart the phone and its cool. but then after a while it does it again. now it just does it all the time. but usually to whoever i was texting. sometimes others are not affected.
EDITok so i might have found the solution but i will leave this hear for future reference) i removed the +1 in front of the number and texts are working fine as of right now. if anything changes i will re-edit again.
EDIT2: so this did not work for me. i read it on the vzw community forum.
second issue. GPS. cant get a fix no matter what i do. ive tried everything i could without hard resetting the phone. i even downloaded GPS Status and used that. nothing helped.
phone is all stock. no root.
any help is greatly appreciated.
I had the same issue with textimg yesterday. I could receive but not send and would get the error message you had. I rebooted my phone and have not had the issue since. I am curious as well as to what caused this issue. I am stock, not rooted, and using the stock messaging application.
Sent from my Xoom using XDA App
Try the GPS Test Plus app. It shows you how many satellites you're connecting. It connects actually pretty fast.
I have no idea if this is typical but, my 3g wont connect at the top of my phone unless i press retry and then wait for about a minute, then it will work fine until i stop for a bit, and i have to repeat the process.
I'm running Commrom 2.0, Edo1 modem.
It all started happening when i installed the first comromm.
Ive opened the hidden menus before, but can't seem to see anything changed.
But then again i wouldn't know what id be looking for.
Please help!
Thank you so much.
I'm having a problem that has me stumped.
YouTube
Earlier in the week, I noticed that I was unable to stream YouTube videos over mobile data. I could launch YouTube and it would bring up the top videos. I could search and it would get me results. I could not however get anything to actually play, when I choose a video it will just sit at the loading screen, and my bars will turn grey. I will not get a mobile data connection back until I back out of Youtube. I confirmed this issue with several different videos while in different parts of the state, so it isn't limited to a certain video or tower.
Google Talk
If I am at the main screen that shows who is online/offline, usually this will display properly. However as soon as I pick a name and go to send a message, my bars will turn grey and I will lose my data connection. It will not come back until I back out of Talk. Sometimes after this happens I can reopen talk and it will sit at the main screen for a while, get mobile data back, and display who is online and who is not. Most of the time, Talk will not work again until I force close it.
Edit: Talk will not disconnect until I actually send a message. The message makes it through most of the time, but then I lose mobile data. This results in Talk saying "Lost connection to Server. Messages will be sent when online."
I am on CM7 Nightly 20 with the stock CM7 kernel since the day Nightly 20 was released. Just to be safe, I did a full wipe in Fastboot erasing the following partitions before re-flashing: userdata, cache, webtop, system, boot.
I am unsure when this problem started. I know that YouTube worked last weeks, but when I think back, I can't remember the last time Google Talk worked while I was on mobile data. Note though, that while on Wifi everything works just fine.
I'm at wit's end here. I'm going to wipe the phone again and install stable Ba2tF and just Google Apps, and see what happens (after I flashed Nightly 20 earlier today I had the Market start spam reinstalling my apps before testing Google Talk - though I did get to test it and have it lose data after just a few apps were installed).
I'm on 30P for the radio, AT&T, Western Massachusetts, any help would be greatly appreciated!!!
I was going to post the same exact problem. The problem only appears over cellular. Over WiFi, everything works fine. Also, I just reflashed stock and it works. So it would seem to be a problem with CM7 and/or AT&T.
I'm going to get a good logcat of what's going on after I narrow it down a bit more... my current log is 1MB, which as about 2 minutes of info. I'm going to try to narrow it down to just the few seconds from when I hit "send" to when I get disconnected.
Hopefully at that point someone smarter than I can figure out what's going on.
DK
DeathKoil said:
I'm going to get a good logcat of what's going on after I narrow it down a bit more... my current log is 1MB, which as about 2 minutes of info. I'm going to try to narrow it down to just the few seconds from when I hit "send" to when I get disconnected.
Hopefully at that point someone smarter than I can figure out what's going on.
DK
Click to expand...
Click to collapse
Just thought I'd chime in and give some feedback. Tested this out on Weekly #2 both with wi-fi and regular data and everything was working as it should. I've been through a few different versions of CM7 and have not run into this.
Have you been using the same gtalk .zip each time? Maybe try re-downloading it along with your fresh install? Also, have you re-flashed your radio?
And here is a logcat capture. I force closed Talk, started the capture, launched talk, connected, pressed on my roommate's name, and lost my connection. The part that says "<SNIP>" is where my email address was.
I'm going to upload it here, then start to go over it myself.
DK
ghost_og said:
Have you been using the same gtalk .zip each time? Maybe try re-downloading it along with your fresh install? Also, have you re-flashed your radio?
Click to expand...
Click to collapse
Yeah, the GAPPS package ROM Manager lists as newest is still 20110828, which is also listed as newest on the Cyanogen Wiki. I never re-downloaded it, I've always used the same .zip everytime I've needed it... which is since Pre-Beta1.
I didn't flash my radio up to 36P when it came out since some people reported issues with it, and 30P had been working fine for me since June/July.
I am going to try to re-flash Google Apps now, this time without using the new version of talk that supports the front facing camera... since I never used the functionality anyway. I will report back in a few minutes.
DK
I tried reflashing both AT&T radios and both versions of Talk (w/ and w/o video chat).
For me, I get disconnected as soon as I open Talk. Happens every time. I froze Talk and I was disconnected when I got a Gmail notification. Maybe it was a coincidence but either way I was disconnected so the problem isn't limited to Talk. Maybe it's a problem with the Google Services Framework.
Here is what I think is a better logcat of what happens. This time, I setup CM7 to have long press back kill the currently active process, so that I could kill Talk right away.
I started the logcat from killing Talk and hitting the home button while it was restarted. I sent one message that said "Son" to my roommate, and lost my data connection. I then waited 20-30 seconds, killed Talk, it restarted, I got data back, I sent another message to my roommate that said "disconnect", and I lost my data again.
NOTE: This is with the Talk from the newest GAPPS (fresh download with ROM Manager), but not the one with the camera support (camera crap was cluttering the logcat anyway).
Anyone who is smarter than I able to see what's going on here?
DK
Same problem with CM7 Beta so I'm guessing there's some problem between CM7 and AT&T. I'm on AT&T in NYC.
I have a list of ROMs this does NOT happen on. I went back and restored to several points trying to figure out exactly where the problem started, and while I didn't find that, I do have a list that it does and does not happen to.
Talk Works on:
Prebeta2
Prebeta3
Prebeta4
Stopgap
Ba2tF
Weekly1
Nightly8 (likely it works on Nightlies 1-8, I just never made a backup after that and went right to 20 so I dont know exactly where the issue started with nightlies)
Talk does NOT work in:
Weekly3
Nightly20
So at some point between Nightly9 and Nightly20 (which includes the commits for Weekly3), something happened with Talk that is causing it to drop your data connection when you send message or refresh the friend list.
If any Dev happen to stumble upon this thread, I did take a logcat dump and linked it above as a txt file called "betterlog.txt" which clearly shows two disconnects while using Talk without having a lot of other "noise" in the logs from other things happening on the phone.
DK
Same problem, only I have this in Ba2tF. Odd thing is, I was running Ba2tf for some time, then all of a sudden this issue just appeared. I couldn't get it to clear, even after wiping data, caches, re-flashing etc...
Looks like this is nothing new. Check out CyanogenMod issue 3557.
---------- Post added at 02:52 AM ---------- Previous post was at 02:38 AM ----------
Same problem in Ba2tF. I was running Ba2tF for several weeks, then this problem just popped up. Couldn't get it to clear.
Looks like an old CyanogenMod issue. Issue #3557.
I don't know if it's AT&T that changed or CM7 but the problem's gone since I started using weekly #4.
The short of it is, my Wifi crapped out for reasons beyond my experiences thus far.
The long of it. I flashed epinter's 07/25/2012 Nightly and everything seemed to be working nicely, Wifi especially. Then today, out running errands and dropped my Atrix in my Car Dock and attempted to turn on Bluetooth for the first time since flashing, and the device froze then restarted. Once back up, I tried turning Wifi back on, and the device froze again and restarted. Thinking maybe the radio driver went south, I grabbed epinter's 07/27/2012 build (epinter-cm10-20120727_1846-UNOFFICIAL-olympus.zip), and still no luck. Back into Recovery, Wiping everything and also factory resetting then flashing twice over again, boot up, still no wifi, and if it manages to seemingly fire up, the device hangs and restarts.
Within the last 2 hours (Been at this for about 12 hours now.) I grabbed Jokersax's build (Beta 0.1.0), wiped/reset/flash twice as I have before. Now as I take a breath I noticed that the Wifi Icon came up in the Notification bar, but when I go into Settings and Scan, I see none of the Networks around me. I looked under Advanced and noticed that my MAC Address is 'Unavailable' nor am I showing an IP address, even though Wifi is saying 'On'. Verified on my Router, my Phone is not connected to it.
Odd Side note, installed aLogcat just to see if I could catch any errors, and it is not giving me anything, that is, I am not seeing any logs through the app. Most likely an unrelated issue, but still a tad annoying.
Everything else seems in order, including Mobile Data (Able to access Web Pages, Market/Play Store, receive email, etc.). Just Wifi pretty much 'Lights are on, but no one is Home.'. Any suggestions on next steps?
We discussed this issue over in some other threads and conclusion is that it's a hardware malfunction Ur broadcom chip is burned,many people (including me) had that problem.
Sent from my MB860 using xda app-developers app
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
try making a clean install and you'll se that you won't have that problem!
Stark5 said:
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
Click to expand...
Click to collapse
I can't search the threads right now as i am typing from my phone-search is limited to 20-30 posts... But keywords for ur search should be : "atrix wifi error" or "wifi and bluetooth error on atrix" Several forums have this kinda threads,not just xda unfortunately ... seems like it's very often malfunction on this lovely phone. I couldn't repair my previous atrix so i bought another one.
Sent from my MB860 using xda app-developers app
imarmand said:
try making a clean install and you'll se that you won't have that problem!
Click to expand...
Click to collapse
We're talking fastboot wipe kind of clean install? Going to give that a go as a last attempt, will post results here.
Glimmer of hope tonight, was discussing the problem with a friend, went to turn on WiFi and it actually scanned and connected for about 2 minutes before crapping out. This tells me there maybe life to the chip still. Now to get fastboot to connect and try a wipe and see what happens.
Sent from Xoom running cm10
Any news on this front? I am one of the afflicted as well.
I'm having a similar issue. though my BT works just fine, no delays, no errors, no intermittance.
Wifi, I can scan for networks just fine. i click on mine to connect. it shows connecting, noting that when it says connecting the signal shows 1 bar as compared to the full set of wifi bars when scanning, i am also right next to the AP. is tries connceting for about 20 seconds or so. then goes back to saying "saved" under the SSID, other networks showing "disabled" when this happens. i originally noticed this after flashing epinters cm10. i tried flashing 37p, 36p and 30p radios with no difference.
EDIT: also want to note that i HAVE disabled the "avoid poor connections" option. and have tried setting static IP.
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
johnmartin1981 said:
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
Click to expand...
Click to collapse
Mine works occasionally so I don't think the radio is dead. The rom just acts like it's not there most of the time and doesn't give a mac address. Sometimes it works though after a reboot. Would flashing a different radio help? My baseband version says N_01.77.37P
I had an IP and a MAC, but no wifi internet.
Using mobile data, I downloaded Set DNS and then enabled wifi, works fine.
Now it's working but mobile data is going very very slow, it took 5min to download Set DNS.
I have a skyrocket but the "no wifi" issue is probably the same - your not getting DNS
I'm going back to CM9 for now.
+1 wifi matter under CM10
Try rebooting the router.
Experienced same issue (unable to connect, showing full bars, dropping to 1 bar when connecting and never being able to complete a connection) rebooting my router has fixed the issue. I'm not technical but it might have to do with the DNS release for addresses .. in any case unplugging my router for a bit and restarting it fixed the issue for me.