Help me - Archos 70IT not connect PC - Gen8, Gen9, Gen10 Q&A, Help & Troubleshooting

after i fortmated A70IT (use Reformat Device in Boot menu), it cannot connect to PC. So i can't copy firmware to upgrade.
Pls help me, how can connect A70IT to PC?
Thanks all.

When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?

msticninja said:
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
Click to expand...
Click to collapse
yes. Sometime, show the warning request fortmat Disc I: ( disc of A70) but can't format it. The warning only show in few second and then disappear.

Having trouble with the translation. If you can still get into the Boot Menu, but the ram disk doesn't show up when you select Update Firmware, it sounds like there's some hardware trouble. I'd try to contact support. Someone else may have some ideas, as well.

Thanks all, i found my problem. The cable was broken so i bought the new cable. it's ok.
I installed SDE, UrukDroid 1.0 successfull.
Now, it can not read the SDcard, who can help me this problem?

fgc_vn said:
Now, it can not read the SDcard, who can help me this problem?
Click to expand...
Click to collapse
Does the card works on your pc?
if yes, reformat it and try it on your archos.
if no, your card is propably broken..

yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.

fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
Don't format NTFS, it's not supported on every FW version. Make sure the partition table in MS-DOS type, and make sure the storage scheme on the A70 is set to Fat, not Ext3.

fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
So the usb ports are definitley working, must be card?

davemon said:
So the usb ports are definitley working, must be card?
Click to expand...
Click to collapse
Usb ports? We're talking about the SD Card slot I thought...

Related

USB Storage Damaged

So i was about to check something on the internet by using 3g data, but for some reason the 3g wasnt working, so i thought id refresh the phone by giving it a fresh reboot.
Upon doing so, after the phone fully rebooted, i got a notification in the notification bar 'Usb Storage Damaged' with sub-text 'Usb storage damaged. It may need reformatting'.
I have checked and i can access everything in CWM recovery, so therefore backing up the stuff i want/need shouldnt be a problem.
My question is, that is there a way to fix this WITHOUT reformatting?
Any help appreciated.
Thanks
Sent from my GT-I9100
Ideally copy off the data first so you have a backup then run chkdsk in Windows as it's FAT32.
russ18uk said:
Ideally copy off the data first so you have a backup then run chkdsk in Windows as it's FAT32.
Click to expand...
Click to collapse
will try that. Thnx
Sent from my GT-I9100
russ18uk said:
Ideally copy off the data first so you have a backup then run chkdsk in Windows as it's FAT32.
Click to expand...
Click to collapse
Thanks boss it worked
Sent from my GT-I9100
russ18uk said:
Ideally copy off the data first so you have a backup then run chkdsk in Windows as it's FAT32.
Click to expand...
Click to collapse
THANKYOU! THANKYOU! THANKYOU! THANKYOU!
This was a quick, easy and perfect fix. I cannot possibly thank you enough!
Thanks too.
Sent from my GT-I9100 using Tapatalk
Hi, I have a similar problem on my unrooted S2.. I have read that using chkdsk in Windows on an unrooted phone wont work (and didn't when I tried). I don't mind rooting, though I'm not sure if I could even do this while there is a USB storage error. I have hours of recorded lectures on my phone, and exams coming up soon so I am desperate not to reformat if possible!
I've been using my phone without USB storage for about 2 weeks now trying find a fix, and I guess this is my last hope, so any help would be greatly appreciated.
Teggers said:
Hi, I have a similar problem on my unrooted S2.. I have read that using chkdsk in Windows on an unrooted phone wont work (and didn't when I tried). I don't mind rooting, though I'm not sure if I could even do this while there is a USB storage error. I have hours of recorded lectures on my phone, and exams coming up soon so I am desperate not to reformat if possible!
I've been using my phone without USB storage for about 2 weeks now trying find a fix, and I guess this is my last hope, so any help would be greatly appreciated.
Click to expand...
Click to collapse
What have you tried so far to fix it?
Sent from my GT-I9100
russ18uk said:
Ideally copy off the data first so you have a backup then run chkdsk in Windows as it's FAT32.
Click to expand...
Click to collapse
Thanks for your answer , But when I connect my phone to the PC and choose USB storage ,all I get is grayed out I and J drives.
how do I preform a CHKDSK? I tried running CHKDSK.exe but it doesn't seem to do anything (it says it's in read -only mode) .
EDIT:
I got it ,it's working again ,a couple of restarts and connecting \disconnecting to pc solved it.
as for CHKDSK.exe I copied it to the sd card and ran it from there.
thanks a lot
Hi,
I have a similar problem...
My SGSII battery ran out and when I started the phone after recharge, it started to give an error that the internal storage is damaged and also stopped to recognize the microSD card.
The microSD connected to the PC it is recognized and does not accuse error with chkdsk. I tried to format the MicroSD (on the phone) and then to mount it, but it does work.
Also, connecting the phone to PC in mass storage mode simply shows teh drive letters, I can't access the drives.
I did not want to format the internal storage before be able to copy my data, and I think the problems are related.
I managed to mount and access the internal storage using the terminal emulator (running on the phone) using the command
mount /dev/block/mmcblk0p11 /sdcard/
But the rest of the system does not recognize even after this procedure, and I don't know the command to do the same with the MicroSD; or copying data to a PC to then try to wipe or factory reset.
I've tried to reinstall the ROM with ODIN and did not solved the problem.
Also tried to install CWM recovery, but it can not mount / sdcard (gives error).
Could anyone help me?
Thank you!

mount issue

Hi all,
When I connect my phone to a pc, my sd card works but the internal storage does not mount which has been working fine until yesterday. I already have the updated drivers and had no problem until now.
Is anyone able to help?
pokey77 said:
Hi all,
When I connect my phone to a pc, my sd card works but the internal storage does not mount which has been working fine until yesterday. I already have the updated drivers and had no problem until now.
Is anyone able to help?
Click to expand...
Click to collapse
Does the internal card show up fine on your device itself?
Yes it shows up and works fine with no errors.
pokey77 said:
Yes it shows up and works fine with no errors.
Click to expand...
Click to collapse
Take the sd card out and attempt to mount it on the pc, make sure you choose the disk drive option from the pop up menu when you plug the device in.

USB not working after CM10.1

hey after flashing cm10.1, I cannot able to detect my usb drive. It's neither shown in sdcard/0/extStorages, nor in ESExplorer usb drive after granting super user permissions. I could able to connect my tab to pc using mtp but usb is a no go. Thanks in advance...
ycharan said:
hey after flashing cm10.1, I cannot able to detect my usb drive. It's neither shown in sdcard/0/extStorages, nor in ESExplorer usb drive after granting super user permissions. I could able to connect my tab to pc using mtp but usb is a no go. Thanks in advance...
Click to expand...
Click to collapse
You sghould take a look in /mnt/usbdrive/...
lightman33 said:
You sghould take a look in /mnt/usbdrive/...
Click to expand...
Click to collapse
I got it....Actually its my mistake... I didnt check my usb is in ntfs format.... So I converted into Fat and I got it...
By the way is there any method to connect the usb drive with ntfs forrnat.. if it does then I hope we can connect our external hard disk too... that would be great...
ycharan said:
I got it....Actually its my mistake... I didnt check my usb is in ntfs format.... So I converted into Fat and I got it...
By the way is there any method to connect the usb drive with ntfs forrnat.. if it does then I hope we can connect our external hard disk too... that would be great...
Click to expand...
Click to collapse
for ntfs filesystem, maybe you need tools like paragon ntfs or ntfs mounter.
if you need storage for files files greater than 4go, you could also use ext4 file system which are usable with windows PC.
thanks
lightman33 said:
for ntfs filesystem, maybe you need tools like paragon ntfs or ntfs mounter.
if you need storage for files files greater than 4go, you could also use ext4 file system which are usable with windows PC.
Click to expand...
Click to collapse
thanks... i will try that...

[Q] Unable to format 8gb microsdhc from FAT32 to exFAT

I want to root my S4 but I'm unable to format my 8gb SanDisk micro sdhc card. I've tried many methods and have been unsuccessful with Google. My stock windows xp formatting tool has the exFAT format option but when I try to format it, it says "Windows was unable to compete the format".
I've tried using an adapter into the memcard port, usb adapter as well as through my S4 while mounted. I've also tried through command prompt but it says "format not available for exFAT drives"or something similar. When I try third party format apps, exFAT isn't even an option. I can format between FAT32, NTFS and even RAW but not exFAT.
Can someone please offer a solution? Thanks.
Windows XP and exFAT
There is a compatibility issue with XP and exFAT. In order to make it work with XP you will have to install an update and/or service pack. A search through google should lead to you what is needed to be installed.
SmokinCharger said:
There is a compatibility issue with XP and exFAT. In order to make it work with XP you will have to install an update and/or service pack. A search through google should lead to you what is needed to be installed.
Click to expand...
Click to collapse
Thank you. I didn't try that because exFAT was an available option even though it wasn't working. I thought it being available meant I had the update. I'll try installing the appropriate update and post the results after.
SmokinCharger said:
There is a compatibility issue with XP and exFAT. In order to make it work with XP you will have to install an update and/or service pack. A search through google should lead to you what is needed to be installed.
Click to expand...
Click to collapse
It worked! Thank you. :good:
You're Welcome
emTr0 said:
It worked! Thank you. :good:
Click to expand...
Click to collapse
You're welcome. I am glad that I could help.

Remix OS USB Harddrive increase internel storage?

Hello,
i would like to watch some maxdome, netflix etc. films and series in a place, we haven't got internet. Because you can't download videos for offline using on pc, I thought i can install Remix OS on a external Harddrive, install apps like maxdome to download films at home and watch it offline. It works, but you only have nearly 4 gb internal storage on this operating system. I found a tutorial on how to increase the internal storage, but this only works on harddrives formatted to NTFS. And you can't install Remix OS on a NTFS formatted external harddrive, can you?. Is there any way to increase the internal storage on FAT32? Will the developers of Remix OS increase the internal storage in the future?(Because it's only Alpha so far) Another problem is, that when i when I connect the laptop to the TV with HDMI, it only transfers the video, but no audio. Will this be fixed in the future?
Sorry, my english is not the best
I am trying to find a way to increase the "data.img" file that is generated on the USB stick... If I can't figure it how, the only option is installing on the HD and make the tuto's.
And I think its possible to install on an external drive and use the whole space. Gonna figure it out how 4 us, okay? \รต/
I think that the HDMI problem will be solved on the next updates. Anyway, its still on Alpha...
While its not solved, we can always use an P2-P2 audio cable ... haha.
The FAT32 file system has a limitation of 4GB files. There's no way to have a bigger data.img without making your flash drive NTFS
tommy.deissenbeck said:
Hello,
i would like to watch some maxdome, netflix etc. films and series in a place, we haven't got internet. Because you can't download videos for offline using on pc, I thought i can install Remix OS on a external Harddrive, install apps like maxdome to download films at home and watch it offline. It works, but you only have nearly 4 gb internal storage on this operating system. I found a tutorial on how to increase the internal storage, but this only works on harddrives formatted to NTFS. And you can't install Remix OS on a NTFS formatted external harddrive, can you?. Is there any way to increase the internal storage on FAT32? Will the developers of Remix OS increase the internal storage in the future?(Because it's only Alpha so far) Another problem is, that when i when I connect the laptop to the TV with HDMI, it only transfers the video, but no audio. Will this be fixed in the future?
Sorry, my english is not the best
Click to expand...
Click to collapse
My HDMI audio does not work right either.
tommy.deissenbeck said:
Hello,
i would like to watch some maxdome, netflix etc. films and series in a place, we haven't got internet. Because you can't download videos for offline using on pc, I thought i can install Remix OS on a external Harddrive, install apps like maxdome to download films at home and watch it offline. It works, but you only have nearly 4 gb internal storage on this operating system. I found a tutorial on how to increase the internal storage, but this only works on harddrives formatted to NTFS. And you can't install Remix OS on a NTFS formatted external harddrive, can you?. Is there any way to increase the internal storage on FAT32? Will the developers of Remix OS increase the internal storage in the future?(Because it's only Alpha so far) Another problem is, that when i when I connect the laptop to the TV with HDMI, it only transfers the video, but no audio. Will this be fixed in the future?
Sorry, my english is not the best
Click to expand...
Click to collapse
Hey
After a while searching and studying about this, I realised that I couldn't make it on the pendrive.
BUT
i successfully installed the OS on my SSD ( OMG, such fast booting ). I split my SSD, formatted to EXT4 and installed, and BOOM! 12 gigs of internal storage.
What does it mean? It means that you can install on a flash drive, such as USB stick or External HD, formatting as EXT4 partition, and run from there.
I'll make some tutos ASAP, teaching how to make those tricky stuff.
BRB!
o/
fleflis said:
Hey
After a while searching and studying about this, I realised that I couldn't make it on the pendrive.
BUT
i successfully installed the OS on my SSD ( OMG, such fast booting ). I split my SSD, formatted to EXT4 and installed, and BOOM! 12 gigs of internal storage.
What does it mean? It means that you can install on a flash drive, such as USB stick or External HD, formatting as EXT4 partition, and run from there.
I'll make some tutos ASAP, teaching how to make those tricky stuff.
BRB!
o/
Click to expand...
Click to collapse
Thanks,
Which program do you use to get the iso on a ext4 partition?
tommy.deissenbeck said:
Thanks,
Which program do you use to get the iso on a ext4 partition?
Click to expand...
Click to collapse
I think you can't.
But, you can install on another USB Stick.
This weekend is "Carnaval" in Brazil (National Holiday). I'll try to make one video explaining 4 u, okay?
[EDIT] Sorry, I'm gonna be a little busy this weekend. What you can do at all is to install the iso normally in a USB Stick, run it with the "INSTALL=1" parameter, format another USB with EXT4 and install it on the stick. You should get it with the internal storage as the size as the USB stick.
I didn't tried it yet, but its a possibility.
Let me know if you're gonna do this.
o/
fleflis said:
I think you can't.
But, you can install on another USB Stick.
This weekend is "Carnaval" in Brazil (National Holiday). I'll try to make one video explaining 4 u, okay?
[EDIT] Sorry, I'm gonna be a little busy this weekend. What you can do at all is to install the iso normally in a USB Stick, run it with the "INSTALL=1" parameter, format another USB with EXT4 and install it on the stick. You should get it with the internal storage as the size as the USB stick.
I didn't tried it yet, but its a possibility.
Let me know if you're gonna do this.
o/
Click to expand...
Click to collapse
I don't get it. What is INSTALL=1 parameter and which program should i use to install it on the ext4 stick?
tommy.deissenbeck said:
I don't get it. What is INSTALL=1 parameter and which program should i use to install it on the ext4 stick?
Click to expand...
Click to collapse
Just install normally the ISO on a USB sitck and boot it normally. When it appears for you select on the both modes ( resident and some other ), you press "E" on your keyboard, to edit the command line. There, you put INSTALL=1 parameter. Then , you'll install it normally, just selecting the right stick.
fleflis said:
Just install normally the ISO on a USB sitck and boot it normally. When it appears for you select on the both modes ( resident and some other ), you press "E" on your keyboard, to edit the command line. There, you put INSTALL=1 parameter. Then , you'll install it normally, just selecting the right stick.
Click to expand...
Click to collapse
Thank you very much, it works!
You just have to install GRUB bootloader when it asks you, the other questions you can skip. Then it works!
tommy.deissenbeck said:
Thank you very much, it works!
You just have to install GRUB bootloader when it asks you, the other questions you can skip. Then it works!
Click to expand...
Click to collapse
You're welcome!
Hit thanks button, plz <3
Curiosity
fleflis said:
You're welcome!
Hit thanks button, plz <3
Click to expand...
Click to collapse
Will it install grub to the USB. I dont want to overwrite grub on my HDD. Currently I have managed to have a USB formated with ext4 and swap, and was able to use unetbootin to put install files on. I dont use the install option as I havent used the two usb as you have here. I do have a full install on my internal ssd and have 56 gb to play with but would like to have a usb that can boot on any computer with the ability to access more than 4gb. I have tried a few ways and if it doesnt mess with the bootloader on my ssd then id be happy to know that.
Digitalnom said:
Will it install grub to the USB. I dont want to overwrite grub on my HDD. Currently I have managed to have a USB formated with ext4 and swap, and was able to use unetbootin to put install files on. I dont use the install option as I havent used the two usb as you have here. I do have a full install on my internal ssd and have 56 gb to play with but would like to have a usb that can boot on any computer with the ability to access more than 4gb. I have tried a few ways and if it doesnt mess with the bootloader on my ssd then id be happy to know that.
Click to expand...
Click to collapse
I discovered somethings with my notebook. Its an Asus X550LN, and the BIOS is as secure as hell. So, I had to search on the partitions created the GRUB that the installer says it was installed. And my BIOS just read one type of File System ( I don't remember it right now, but its the one that Windows uses, not Ubuntu ). When I found the GRUB bootloader on another partition, i just copied the files from one partition to another, added a boot option for it to reach the bootloader and BOOM, "chooseable dual-booted". Yeah, its hard because I have to enter in the BIOS everytime I want the other OS, but its a step. LoL.
Anyway, I think you should try to make a 400MB Partition to install the bootloader on the stick, and the space left just format as ext4 and install the RemixOS there.
Yeah... I don't know if you understand what I'm saying.... It can be confusing, but its perfectly clear on my mind. :silly:
I really need to make a video explaining everything... ASAP.
Still Trying
fleflis said:
I discovered somethings with my notebook. Its an Asus X550LN, and the BIOS is as secure as hell. So, I had to search on the partitions created the GRUB that the installer says it was installed. And my BIOS just read one type of File System ( I don't remember it right now, but its the one that Windows uses, not Ubuntu ). When I found the GRUB bootloader on another partition, i just copied the files from one partition to another, added a boot option for it to reach the bootloader and BOOM, "chooseable dual-booted". Yeah, its hard because I have to enter in the BIOS everytime I want the other OS, but its a step. LoL.
Anyway, I think you should try to make a 400MB Partition to install the bootloader on the stick, and the space left just format as ext4 and install the RemixOS there.
Yeah... I don't know if you understand what I'm saying.... It can be confusing, but its perfectly clear on my mind. :silly:
I really need to make a video explaining everything... ASAP.
Click to expand...
Click to collapse
I can dual boot etc. I can do this through Ubuntu by editing the grub command, I have not tried using the REMIX bootloader because it will overwrite the one I am currently using. I have managed to have dual partitions on my stick, but alas cannot boot to the partition needed. Do you have any idea how to edit the lines for booting to the ext 4 on the stick? Its a little different than my Ubuntu grub edit and it just wonte see the secondary partition. Install went fine i look at the files and it's all there just cant figure out hot to edit the current boot config to boot proper -partition.
Thanks and totally get ya. :silly::laugh:
Digitalnom said:
I can dual boot etc. I can do this through Ubuntu by editing the grub command, I have not tried using the REMIX bootloader because it will overwrite the one I am currently using. I have managed to have dual partitions on my stick, but alas cannot boot to the partition needed. Do you have any idea how to edit the lines for booting to the ext 4 on the stick? Its a little different than my Ubuntu grub edit and it just wonte see the secondary partition. Install went fine i look at the files and it's all there just cant figure out hot to edit the current boot config to boot proper -partition.
Thanks and totally get ya. :silly::laugh:
Click to expand...
Click to collapse
wow... I had to mount the partitions manually on Ubuntu on the terminal ( like "mount /dev/sda1 /mnt/tempsda1" ). you should try somethings like that... just listing the partitions on all drives.
Good luck ! o/ :silly:
cannot navigate through disk options
tommy.deissenbeck said:
Thank you very much, it works!
You just have to install GRUB bootloader when it asks you, the other questions you can skip. Then it works!
Click to expand...
Click to collapse
HI ALL!
Hi fleflis thanks for sharing your discoveries, so to make a bootable remix os usb stick that has more than 4gb internal android space is it difficult? im a total noob and i would like to know a step by step turtorial on how to do this. If you would be kind enough to tell me? i dont have ubuntu/linux only windows and android and i would like to use my 128gb usb 3.0 stick to boot android. Thank you very much in advance fleflis or anyone who can help.

Categories

Resources