hey after flashing cm10.1, I cannot able to detect my usb drive. It's neither shown in sdcard/0/extStorages, nor in ESExplorer usb drive after granting super user permissions. I could able to connect my tab to pc using mtp but usb is a no go. Thanks in advance...
ycharan said:
hey after flashing cm10.1, I cannot able to detect my usb drive. It's neither shown in sdcard/0/extStorages, nor in ESExplorer usb drive after granting super user permissions. I could able to connect my tab to pc using mtp but usb is a no go. Thanks in advance...
Click to expand...
Click to collapse
You sghould take a look in /mnt/usbdrive/...
lightman33 said:
You sghould take a look in /mnt/usbdrive/...
Click to expand...
Click to collapse
I got it....Actually its my mistake... I didnt check my usb is in ntfs format.... So I converted into Fat and I got it...
By the way is there any method to connect the usb drive with ntfs forrnat.. if it does then I hope we can connect our external hard disk too... that would be great...
ycharan said:
I got it....Actually its my mistake... I didnt check my usb is in ntfs format.... So I converted into Fat and I got it...
By the way is there any method to connect the usb drive with ntfs forrnat.. if it does then I hope we can connect our external hard disk too... that would be great...
Click to expand...
Click to collapse
for ntfs filesystem, maybe you need tools like paragon ntfs or ntfs mounter.
if you need storage for files files greater than 4go, you could also use ext4 file system which are usable with windows PC.
thanks
lightman33 said:
for ntfs filesystem, maybe you need tools like paragon ntfs or ntfs mounter.
if you need storage for files files greater than 4go, you could also use ext4 file system which are usable with windows PC.
Click to expand...
Click to collapse
thanks... i will try that...
Related
I am running TnTLite 4.4 which I am absolutely enjoying but I was unable to get the USB slot to read a thumb drive. Is there a work around for this?
brown14you said:
I am running TnTLite 4.4 which I am absolutely enjoying but I was unable to get the USB slot to read a thumb drive. Is there a work around for this?
Click to expand...
Click to collapse
I found that re-booting, with the usb device already attached, usually fixs it or, going into file explorer and issuing a 'refresh' command.
what if format for USB drive. Try formatting as FAT32. Tab does not like NTFS
Rumbleweed said:
what if format for USB drive. Try formatting as FAT32. Tab does not like NTFS
Click to expand...
Click to collapse
Rumbleweed said:
I found that re-booting, with the usb device already attached, usually fixs it or, going into file explorer and issuing a 'refresh' command.
Click to expand...
Click to collapse
Thanks for all your suggestions. I will give it a try.
Did you enable USB access on the gtab? I know I had to do that on the Vegan rom. The usb will detect but you still need to enable it for use.
How do you enable it? Or do you mean turning on usb debugging.
Can't get my seagate ntfs 350gb to be recognized... gonna try reformat
Sent from my SPH-D700 using XDA Premium App
after i fortmated A70IT (use Reformat Device in Boot menu), it cannot connect to PC. So i can't copy firmware to upgrade.
Pls help me, how can connect A70IT to PC?
Thanks all.
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
msticninja said:
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
Click to expand...
Click to collapse
yes. Sometime, show the warning request fortmat Disc I: ( disc of A70) but can't format it. The warning only show in few second and then disappear.
Having trouble with the translation. If you can still get into the Boot Menu, but the ram disk doesn't show up when you select Update Firmware, it sounds like there's some hardware trouble. I'd try to contact support. Someone else may have some ideas, as well.
Thanks all, i found my problem. The cable was broken so i bought the new cable. it's ok.
I installed SDE, UrukDroid 1.0 successfull.
Now, it can not read the SDcard, who can help me this problem?
fgc_vn said:
Now, it can not read the SDcard, who can help me this problem?
Click to expand...
Click to collapse
Does the card works on your pc?
if yes, reformat it and try it on your archos.
if no, your card is propably broken..
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
Don't format NTFS, it's not supported on every FW version. Make sure the partition table in MS-DOS type, and make sure the storage scheme on the A70 is set to Fat, not Ext3.
fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
So the usb ports are definitley working, must be card?
davemon said:
So the usb ports are definitley working, must be card?
Click to expand...
Click to collapse
Usb ports? We're talking about the SD Card slot I thought...
I can connect to my "Siyah Kernel" Galaxy S2, which allows me to connect my mouse to my phone. But whenever I try to connect my USB stick, I don't see anything in the Root Explorer.
Is there a special place I need to look to access my 16 GB memory stick?
try
mnt/usbdisk
But if you have formatted stick to NTFS, look at /mnt/ntfs.
przemcio510 said:
But if you have formatted stick to NTFS, look at /mnt/ntfs.
Click to expand...
Click to collapse
That's it. Thanks!
Hello, I am having a problem getting my galaxy tab 10.1 to recognize a usb flash drive I have connected via an adapter. I know it works because it detected a wireless mouse I connected to it, and it shows up when I use dmesg or lsusb in the terminal. The thing is that none of the file explorers I've used (Es, Astro) are able to detect the files I have on it. The usb drive is formatted to fat32; would it be more likely to detect it if I formatted it to ext3 or ext4?
Maybe you need to use this?
RoberGalarga said:
Maybe you need to use this?
Click to expand...
Click to collapse
Thanks so much for showing me that! I went through at lest five other apps that didn't work before trying this. :victory:
Hi Guys,
i have the Tab S 10.5 and rooted it.
No i tryed to get a NTFS HDD to run. So i installed Paragon NTFS ... and i have a external HDD with own power adapter. Furthermore i bought a USB - HUB also a own power adapter. The Paragon app find the harddisk an i can click on mount, but nothing happened even if i try to click on automatic mount or own manual folder choose. It is doing something, say that the HDD is mounted, but in the menue of Paragon, it is declared as unmounted. The same in StickMount, it says the HDD is mounted to folder XY, but there is nothing inside .
Is anyone able to mount external HDD's?
NTFS isn't supported officially. I had to format my microsd card into exfat to get it to work.
Stickmount should work - did u let it download the files when you first run it?
Hm yes it downloaded the files and now if i click on mount, it do it but in the folder there is no file from the harddisk, i tried it with a 1tb and 3tb disk.
Furthermore i can check and repair the disks and the tool is saying everything is fine, but i cannot se anything in the folder where it is mounted.
mr_einsa said:
Hm yes it downloaded the files and now if i click on mount, it do it but in the folder there is no file from the harddisk, i tried it with a 1tb and 3tb disk.
Furthermore i can check and repair the disks and the tool is saying everything is fine, but i cannot se anything in the folder where it is mounted.
Click to expand...
Click to collapse
Tried with my Ntfs flash drive - same on stock and stickmount. Formatted to exfat, works on both.
Guess Samsung changed something that broke stickmount as well.
mr_einsa said:
Hi Guys,
i have the Tab S 10.5 and rooted it.
No i tryed to get a NTFS HDD to run. So i installed Paragon NTFS ... and i have a external HDD with own power adapter. Furthermore i bought a USB - HUB also a own power adapter. The Paragon app find the harddisk an i can click on mount, but nothing happened even if i try to click on automatic mount or own manual folder choose. It is doing something, say that the HDD is mounted, but in the menue of Paragon, it is declared as unmounted. The same in StickMount, it says the HDD is mounted to folder XY, but there is nothing inside .
Is anyone able to mount external HDD's?
Click to expand...
Click to collapse
I got my NTFS drive working using Paragon_NTFS for non-rooted mounting and then opened it with Total Commander. Going the Paragon rooted way didn't work for me either.
mikeyek said:
I got my NTFS drive working using Paragon_NTFS for non-rooted mounting and then opened it with Total Commander. Going the Paragon rooted way didn't work for me either.
Click to expand...
Click to collapse
Doesn't the app require root?
kenkiller said:
Doesn't the app require root?
Click to expand...
Click to collapse
Paragon the app does require it. But the company Paragon also developed a plugin for Total Commander. I was going to post the link but I'm under 10 posts for the forum so I can't.
Anyways just search "USB plugin for Total Commander" or Paragon and that all should come up. You need Total Commander as well but it does not require root.
Sent from my SM-T700 using XDA Free mobile app
Total Commander with the plug in Paragon NTFS work fine on my LG G2
Sent from my iPhone using Tapatalk