Hi there, I think I may have messed the phone up a little, such as this MMI error message which comes up so I can't use speeddial, or any other # code for that matters, also I can't disable call forwarding, and a few other things.
This must have been the result of rooting, etc. Is there an easy way to get my phone back to how it was (basically how it would be straight from the manufacturer, no root at all, just exactly how it was when I first bought it brand new?), bearing in mind I have also flashed it 3 times?
Cheers.
it might help if you said what you flashed it with? Details.
But if you are just wanting to flash back to stock, here:http://forum.xda-developers.com/showthread.php?t=1075278
Read, and follow the instructions. They are very clear.
stoney73 said:
it might help if you said what you flashed it with? Details.
But if you are just wanting to flash back to stock, here:http://forum.xda-developers.com/showthread.php?t=1075278
Read, and follow the instructions. They are very clear.
Click to expand...
Click to collapse
"Hi there, I first of all rooted my previously straight out of the box T-Mobile Samsung Galaxy S2 using the xwkdd_insecure.tar (with Odin and SuperOneClick - I am a complete noob by the way, but this seemed to work after I followed a YouTube video), so that I could then unlock it to use 3 Mobile (in the UK) which I am on - I had bought this phone brand new and sealed from eBay (someone's unwanted upgrade). I then went on to using the free ChainFire sim unlock app, however I soon discovered that after all my phone can't have been locked in the first place as I just got a 00000000 code, never had to enter that and my sim worked having not previously tested it... Then I went on to flash it by using this file first - I9100XWKE7_StockKernel.tar - after seeing another YouTube video to purely debrand it but this only got rid of the yellow ! logo which appeared after rooting it, that is all.
So I then went on to using this method http://forum.xda-developers.com/showthread.php?t=1064894
in order to debrand it of all T-Mobile stuff, such as the T-Mobile logo and trademark tune which came on after switching the phone on, and get it like a standard sim free/factory unlocked phone if you know what I mean. I used this file as mentioned in the link - I9100XWKDD_I9100XXKDH_I9100XEUKD1_HOME.TAR
The latter part of the guide goes on to entering #272*<IMEI># or something like that, but I have tried that all of the other alternatives and all I get is "USS code running" and like 2 seconds later the error message
"Connection problem or invalid MMI code" appears. I basically can't enter anything in my phone dial with # or * or whatever. What is wrong?
I have also noticed that whenever I call someone a message saying "Conditional call forwarding active" appears, but then proceeds to make the call okay. I have tried to disable and fiddle around with the call forwarding settings, phoned my network provider, but again, error messages come up.
What exactly is wrong and how can I fix it - I am a bit of a noob with all this....? It is surely something to do with all that stuff I have mentioned. Please help me as I honestly don't know how to go about fixing this. What is the most straightforward thing to do which will stop these messages?
Last of all, I flashed using the following, my phone seemed to be auto-rooted as I never had to root again? I9100XWKE7_I9100XXKE4_I9100XEUKD1.tar
Thanks in advance."
Related
Hello everyone. I have one Hero100. I have the code for unlock but the phone has failed to unlock. It's locked on orange. When I enter the code , I get no service on the screen. and when I restart it, it asks for the unlock code again. How can I go about this? Its a bit strange.
sounds like orange gave you an incorrect code...
you have put a NON-orange sim in when you try this, yes?
if it fails again, go back to orange and ask for the correct code, as they have the wrong one.
The code is working. When I put the Code I get a successful msg but it wont pick up the network and also when it restarts it asks folr the code again.
The same
I have got the same problem.
I have got that unlock number but after unlocking phone, there is no range at all and info 'no service', but i am able to use 'Sim Toolkit'.
Where is a problem???
hi i'm having the same problem code is gud and it works but after that it says no servic. and when i restart or put any other sim again and turn on the phone it again asks for the code . whats wrong plz
I think not so many people have seen this phone.
I am also having this issue. Simlocked to Orange got my code and put it in and it was successful then it just stays on the 'unlocking sim' screen.
Been using HTC with windows mobile for years but decided to try android. Am I doign something wrong as I cant seem to access any phone fucntionality without putting a sim in then I get this problem we are having.
On a WM device you would still be able to access everything without having a sim in- just using it n PDA mode
, I am having the exact same problem. I have a HTC hero from orange as my contract phone. I have bought the unlock code from from swift unlock (ebay) and entered the code when prompted. The phone says the network is unlocked but the I can't get any network service, and if toggled the flight mode on and off or switched the phone off and on it will ask for the code again. If I put the orange sim in everything is back to normal. I even tried to hard reset the phone and have a fresh start while the unsupported sim is inserted but the same happens again with the addition of a message "unlocking sim". I thought the code was wrong or something, so I got the code again this time from a high street shop and it was the same code. So nothing is wrong with code itself. The guy at the shop told me that he has great problems with unlocking this phone as some seem to accept the code without any problems and others have this no service issue and he doesn't know the reason for it. I am thinking of flashing a new firmware and radio and see what happens, but this will be probably tomorrow. Sorry for my long post, but I wanted you to know that there is nothing wrong with code itself.
Yeah I dont think there is a problem with my code either. Im new to android but have been a winmo user for years, I havent rooted my Hero yet (only got it today) but that was going to be what I try next: root then network unlock.
Let us know what happens when you flash yours.
Possible Solution
When i unlocked my phone i thought the exact same thing, that it hadn't worked - it said no network, something something about my sim, etc. Later on though, I went outside and it was working. Unbelieveable i thought. Turns out when your in an area with no reception (my house) the Hero decides to boldly make sure you know that it's not getting any signal by giving you big scary messages
So once you've entered the unlock code, let it load up the UI fully, turn phone off, and then turn on again and put it somewhere you definately get a recpetion
Anyway this might answer your problems, then again might not.
Thanks for the suggestion but I dont think that is the problem in my case as I do get reception. Although for me once I have put the unlock could it it says success (or whatever) then goes to saying 'unlocking sim' it doesn't atually load up any interface.
Out of intereset where did you (all) your get your unlock code? I got mine from Unlock Now, anyone else got a code from them and can confirm it works?
Hi, I have flashed the new modaco 2.2 rom, and inserted the unsupported sim, but sadly with the same exact result "no service". I then flashed the latest radio from modaco, and repeated the steps but this time after the first time you put your unlock code it will say "no service as usual" but if you try to toggle flight mode on and off the phone will prompt for the code again and then it will greet you with a no sim is inserted or so, so it seems with the new radio the phone doesn't even detect your sim. If I put the orange sim everything is back to normal again even with the new radio.
Hey guys,
This is my first post here so please be nice I will try be as informative as I can!
Last week my aunt got a Samsung Galaxy S2 as an upgrade after my recommendation. She loved the look of things and liked how she could access Youtube and Facebook but then she got locked out of her phone completely and couldn't get back in because she didn't know her Gmail account.
After a bit of research I found out that I should do 'Hard Reset' and all should be back to normal afterwards, I did so and everything looked okay.
After giving the phone back to her my aunt said she no longer wanted it and gave it to me because it was too 'complicated'. Obviously I was overjoyed as my current phone does not even compare to this beast!
I put in my Orange sim, (hers was Orange too) turned on the Wi-Fi to update all the apps not even noticing that the 3g icon wasn't on. I could see the phone had some signal so I thought everything was okay. It was only when I tried to call my dad of the phone that I realised something was wrong. It said 'Mobile Network not Available'.
I have found many threads about 'rooting' or IMEI but I don't understand what they mean as I am a newbie in all of this.
I would send the phone for repair but it does not have insurance so that's a no go. The phone came unlocked too so I don't understand why it's doing this. The sim I put in works on my old phone so I'm pretty sure there's nothing wrong with it.
What should I do?
Looking forward to your replies
See * HERE *
Remove your battery and your sum card.
Wait 10 seconds put them back in and reboot.
If problem still exists go to
settings > wireless and networks > mobile networks. Select your carrier network.
Sent from my GT-I9100 using XDA
Thank you for your replies samgalaxys2 and dred_up, I appreciate it!
I tried doing what you said samgalaxys2 but nothing's changed, I tried doing it myself before but no luck
In reply to your questions on the other thread I can confirm that my sim works as it works on my old phone. I can also create contacts on the sim too.
I don't know what the EFS folder is but when I dial that number you said (*#06# ) I can also confirm that the IMEI is the same number shown in my settings and underneath the battery.
What should I do?
Wiska.
The fault = put your sim in the phone then not working .
First step has to be to get a new sim .
That would be followed by either a return to a service centre or via XDA a flash of new stock firmware .
jje
Have you tried the Access Point Names in the network settings, mine changed it's self after flashing a new rom.
Hello JJEgan, I have tried various working sim cards and it doesn't make a difference, I even tried a brand new T-Mobile sim. In the 'About Phone' section I can clearly see the Sim's name but it always says Out Of Service underneath.
I have tried that too s.d.oconnor, at times it doesn't work and when it does it says something like 'Network Updated' but nothing changes.
What do you guys mean by 'Flash of new Stock Firmware' & 'Flashing new Rom'
Sorry for the amount of questions guys, I have never experienced something like this before
Wiska said:
Hello JJEgan, I have tried various working sim cards and it doesn't make a difference, I even tried a brand new T-Mobile sim. In the 'About Phone' section I can clearly see the Sim's name but it always says Out Of Service underneath.
I have tried that too s.d.oconnor, at times it doesn't work and when it does it says something like 'Network Updated' but nothing changes.
What do you guys mean by 'Flash of new Stock Firmware' & 'Flashing new Rom'
Sorry for the amount of questions guys, I have never experienced something like this before
Click to expand...
Click to collapse
Stock - unbranded Samsung roms .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Hmm okay,
I followed the thread and had to do it at-least 3 times before I could do it 'correctly'
I managed to get Ice Cream Sandwich OS on the phone and although I could now use the sims internet I can't use it to call or access my voicemail.
What can I do to fix this?
If I have to download a new rom could you copy the link because I think that maybe that's where I went wrong?
I am sorry but I tried my best as it is my first time doing all of this.
I think the Rom should be an XX as the phone and myself are in England plus my network is Orange
Wiska.
You can use the Dutch firmware XEN without problems...
Also is your fone a i9100P (NFC) or standard i9100?
Or take fone into Orange or a Samsung repair centre to have it checked out.
Hmm do you recommend I Flash it again and get XEN?
Do you think they'll repair it even though it has been flashed? I've got ICSandwich on it and I don't think Orange has released it yet lol
I tried to change the APN but nothing is happening
Wiska said:
Hmm do you recommend I Flash it again and get XEN?
Do you think they'll repair it even though it has been flashed? I've got ICSandwich on it and I don't think Orange has released it yet lol
I tried to change the APN but nothing is happening
Click to expand...
Click to collapse
If it was a Orange (UK) branded phone, then first download, install and run Triange_away app. This will reset the custom rom flashing counter and take away any triangle at boot up (if present).
Next you need to download and flash the BVKJ4 rom from * HERE * - it is the latest official Orange UK ROM. It will wipe the phone to factory setting and you will loose root. It may solve your problem, but if it doesn't it will put your phone back to valid warranty for the service centre.
Sorry for the late reply, the amount of work college gave us yesterday was just too much!
Thank you for the link fred_up but the links are dead
Thank you for trying to help though, I really appreciate it mate!
Anyone know what I should do?
Search for the stock rom you're after on Samfirmware.com.
Edit to add - Make a note of the rom details from Intra's thread (the one you were linked to where the links don't work), that will make searching Samfirmware easier.
Thank you MistahBungle!
I am downloading what looks to be the firmware I need right now so fingers crossed it works!
Many thanks for the help mate! I will keep you updated if it works or not
I tried the latest Orange one but that didn't do anything, I then tried using the Carphone Warehouse one and although the 3G internet stuff works I can't call or text!
This is so annoying lol, any advice?
The phone isn't locked or anything as my aunt gave it to me, what can be the problem?
Wiska said:
I tried the latest Orange one but that didn't do anything, I then tried using the Carphone Warehouse one and although the 3G internet stuff works I can't call or text!
This is so annoying lol, any advice?
The phone isn't locked or anything as my aunt gave it to me, what can be the problem?
Click to expand...
Click to collapse
toot the damn phone
had same problem , just wipe data/factory reset, and cache then make a clean install of ur rom , and request the APNs again from your carrier
at first u can just delete the APN settings of ur carrier and try to get them again from it
Hi there, this is my first post on this forum so I apologize if this is in the wrong place. I have recently purchased an s3 (GT-I9300) used, on orange network. When the phone boots, the orange network logo is displayed. I rooted the phone using CF-Auto-Root-m0-m0xx-gti9300 using odin , and i have checked, and it is succesfully rooted. This was my first root on a phone, and seemed to go well. I have not installed anything else using odin. Then I went about to unlock the phone, getting numerous unlocking apps (ariza patch, galaxsim unlock, galaxy S unlock, voodoo s3 unlock) but they all do nothing, saying they have unlocked it but my talkmobile micro sim (which runs off vodaphones network) will not work in the phone, it just asks me for a network key, then says emrgency calls only, and if i try to dial anything, says 'not registered on network'. I have not tried another sim in it yet as that was the only microsim I had.
My question is, can I unlock this phone in any other way, like would taking it to a market stall unlocker, or buying a code from the internet do the trick? and also, will I be able to install custom roms on this phone safely? Im not sure if the orange bootloader affects this in any way. Thankyou for reading, any help would be greatly appreciated
ckush said:
Hi there, this is my first post on this forum so I apologize if this is in the wrong place. I have recently purchased an s3 (GT-I9300) used, on orange network. When the phone boots, the orange network logo is displayed. I rooted the phone using CF-Auto-Root-m0-m0xx-gti9300 using odin , and i have checked, and it is succesfully rooted. This was my first root on a phone, and seemed to go well. I have not installed anything else using odin. Then I went about to unlock the phone, getting numerous unlocking apps (ariza patch, galaxsim unlock, galaxy S unlock, voodoo s3 unlock) but they all do nothing, saying they have unlocked it but my talkmobile micro sim (which runs off vodaphones network) will not work in the phone, it just asks me for a network key, then says emrgency calls only, and if i try to dial anything, says 'not registered on network'. I have not tried another sim in it yet as that was the only microsim I had.
My question is, can I unlock this phone in any other way, like would taking it to a market stall unlocker, or buying a code from the internet do the trick? and also, will I be able to install custom roms on this phone safely? Im not sure if the orange bootloader affects this in any way. Thankyou for reading, any help would be greatly appreciated
Click to expand...
Click to collapse
Read this thread all the way through same problem as you >> http://forum.xda-developers.com/galaxy-s3/help/i9300-network-unlock-firmware-version-4-t2612736n << ( it will explain things more clearly ) and look at the last two comments it as a link to a paid solution
I took my wifes Samsung Galaxy Note 3. At boot, it does not bring a model after the "Samsung Galaxy Note 3 boot" picture shows. So, I thought it was SM-N9005 naturally because at the sticker behind, it had that. Sooooo, when I used it for some time it crashed and started bring something popping up something to do with "android has stopped"
I was blue of everything completely. So, I said why not try and flash a custom rom. WHAM!!!!
I have been fighting with the phone since August 3rd 2018. Finally I have it running. Now, the steps I went through, I believe the way the information was scattered all over the forum and all that, That is why I even put the topic up there the type of board and the sticker are totally different. A lot I learned from the forum jumping from this topic to the next and using Youtube as well.
Software required:
Odin3 v3.07
For this specific mobile, I had flashed so many and went through alot of fails through Odin, bootloops, null imei, loosing data and softbricking. The final which worked perfectly for me was N900PVPUDNK4_N900PSPTDNK4_SPR which I got from stockroms website, "Use google to search for that site"
Instructions:
I believe everyone here nows how to use Google if you don't know how to use Odin.
Flash the rom.
Do a factory reset.
Restart the Handset, all steps complete.
Now, if you have the issue of sim lock, download Region Lock apk install and follow prompts.
I had the issue of sim lock. Dialed *#0011# and tried to check it out and followed instructions on youtube and on XDA. And helped me abit to work about my issue of knowing sim status if locked. Then, I changed baseband to GSM/UMTS using the command above. Then, I used Region Lock to unlock the handset. Ohhhhh, sorry, installed two. SSU. I cant remember which worked but one of them did. If you want links there everywhere on this forum for the SSU and the Region Lock and instructions.
But why am I doing this, It took me a full month to get it working. I don't want someone to go through the same process. One should know there PDA and CSC before trying any flashing. If the phone has crashed, first consult and then go into the phone info and know what your flashing. Otw, KUDOS>
Boot to download mode to show model.
This posts reads as a question ??
If its a N900P its the Sprint forum you want .
Hi all,
Alright so this is going to be a long post. So I recently flashed my phone to the U1 firmware, I currently have an unrooted Verizon Unlocked Samsung S9+. I wanted to switch phone carriers over to Visible (subsidiary of Verizon), here are the order of events that occurred:
1. Visible's website says that my device in not compatible using their IMEI checker, there is a solution that was found on reddit about flashing the device on the U1 firmware.
2. I flashed the device on the U1 firmware using Odin and the Visible SIM card worked as expected. No issues with the flash
3. Data/Texts etc.. are all working as expected. Except for Voicemail.
When I try to check my Voicemail, it is acting as if it's still on the Verizon Voicemail system. It says "Welcome to the message management system, please enter your mailbox number". No one can leave me a VM either because of this. I tried several different combinations of numbers, including my full 10 digit cell number and last 4, to which it says "XXX is not a valid mailbox number", which would be because my number is no longer active on Verizon, so it's unable to access it. Which makes sense. The Visible Customer Care team tried the following:
1. Provisioning my VM multiple times
2. Take out SIM card, turn phone off for 1 min, insert SIM card again, and toggle airplane mode for 30 seconds
3. Reset network settings
After numerous days of troubleshooting with them, eventually they said it was because my device isn't compatible, ok, I can't argue with that. I have not seen anyone else experiencing this issue that had flashed their phone to U1 firmware.
After trying all of this with them, I eventually factory reset my device, hoping that might do something. That still did not work.
My questions is, is there something I missed with flashing the U1 firmware? Why is it still using Verizon's VM system even though I flashed it to U1? Is there any way to fix this? Any help is greatly appreciated, and please don't hesitate if you need any other information.
bornxawkward said:
Hi all,
Alright so this is going to be a long post. So I recently flashed my phone to the U1 firmware, I currently have an unrooted Verizon Unlocked Samsung S9+. I wanted to switch phone carriers over to Visible (subsidiary of Verizon), here are the order of events that occurred:
1. Visible's website says that my device in not compatible using their IMEI checker, there is a solution that was found on reddit about flashing the device on the U1 firmware.
2. I flashed the device on the U1 firmware using Odin and the Visible SIM card worked as expected. No issues with the flash
3. Data/Texts etc.. are all working as expected. Except for Voicemail.
When I try to check my Voicemail, it is acting as if it's still on the Verizon Voicemail system. It says "Welcome to the message management system, please enter your mailbox number". No one can leave me a VM either because of this. I tried several different combinations of numbers, including my full 10 digit cell number and last 4, to which it says "XXX is not a valid mailbox number", which would be because my number is no longer active on Verizon, so it's unable to access it. Which makes sense. The Visible Customer Care team tried the following:
1. Provisioning my VM multiple times
2. Take out SIM card, turn phone off for 1 min, insert SIM card again, and toggle airplane mode for 30 seconds
3. Reset network settings
After numerous days of troubleshooting with them, eventually they said it was because my device isn't compatible, ok, I can't argue with that. I have not seen anyone else experiencing this issue that had flashed their phone to U1 firmware.
After trying all of this with them, I eventually factory reset my device, hoping that might do something. That still did not work.
My questions is, is there something I missed with flashing the U1 firmware? Why is it still using Verizon's VM system even though I flashed it to U1? Is there any way to fix this? Any help is greatly appreciated, and please don't hesitate if you need any other information.
Click to expand...
Click to collapse
Please check your voice mail settings in your phone app. See my screenshots.
There you should select the correct service provider and the Visible mailbox number.