Hi guys
Hoping someone here can help me
I have a Qtek 9100 G4 that currently has IPL 2.21.0001 and SPL 2.21.0lip with Slim Diamond WM6.1 Rom
This was running beautifully until i left the phone for a weekend plugged into the wall charger.
When i came back now whenever i switch on the phone it shows the Diamond splash screen, doesnt show the ipl or spl and just stays there indefinately.
I allowed the phone battery to drain for a week and when i turned it on it booted normally again, got to the main wm 6.1 screen, it automatically customised the rom and then rebooted. Then im back at stage one again! I can repeat this by leaving the phone with no battery to drain the internal one. Hard reset works so say but doesnt have any effect.
I have tried different techniques to reflash the phone but no matter which guide i follow the usb is never ever recognised as connected. All RUU say is error 260. Even Wizard Love is no go. I have tried the disabling usb connections and disabling the correct services, can happily get into bootloader mode but can do no more - says usb in corner but computer never registers anything attached
My only idea is that somehow leaving it plugged in has fried the usb - its weird tho as it still charges fine with computer or wall charger.
Im getting near to giving up with this phone now as no matter how many guides i follow none ever get anywhere with this phone
Has anyone had anything similar happen?
Hi Bro, I got problem with my HTC HD2, unfortunately I got White Screen! Pls see the link provided, I have the same problem.
I did the HARD RESET, tried remove the phone and SD cards none of them worked!
http://www.youtube.com/watch?v=QS02ySr2Kic
Any idea?
mishaquae said:
Hi Bro, I got problem with my HTC HD2, unfortunately I got White Screen! Pls see the link provided, I have the same problem.
I did the HARD RESET, tried remove the phone and SD cards none of them worked!
http://www.youtube.com/watch?v=QS02ySr2Kic
Any idea?
Click to expand...
Click to collapse
Could be LCD ribbon broke or pulled if you had the touchscreen replaced.
Does it vibrate when powered on.
IF so just leave it on and connex to pc and sync it.
Install HSPL
If you see an image pop up during and after completion, install a Radio and then install a cooked rom. Remove HSPL install OEM rom if needed.
If the screen never shows an image, see if you have a warrenty available.
If not the best choice for a LCD screen prelacement is buying both Touch and LCD as one unit.
Getting everything fitted just right after removing the touch screen is a bit difficult for the average joe.
HTC HD2 White Screen
Thanx bro for the support.
"Quoted"
Does it vibrate when powered on (Yes).
IF so just leave it on and connex to pc and sync it (it doesn't sync with PC).Note: I tried to Sync with many others PCs.
"Unquoted"
HSPL required USB connection which is my main problem to access the phone!
Thx
Have you tried taking the battery out?
Cheers
Htc hd2 ws
Have you tried taking the battery out?(yes)
Testing the hardware:
With the power off, press and hold the Volume Down button and then tap the Power button. Tell us what you see.
Have you done anything to the phone between the fault and the previous switch on? Have you removed the battery?
With the power off, press and hold the Volume Down button and then tap the Power button. Tell us what you see.
First of all, the 3 colors screen (Red, Green and Blue) with the following info:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
And
In the bottom (the white area), I can see the "Serial" title but if connected to the PC "USB".
In addition to this, if I start running DFT HSLP2 for HTC Leo software under the colores screen, I can select which SPL I required, if select SPL 1.42 I'll get the following error:
DFT HSPL2 for HTC Let (the title box)
Crirical Error
Flow:00000006
Error Code: 00000014
Description:Unknown
Have you done anything to the phone between the fault and the previous switch on? Have you removed the battery? (No)
Thanx for your attention.
I have Exactly the same! TIA for any help
Dropped HD2 from approx belly high on Boxing day when I slipped on Ice.
worked ok with a few crashes for 24hrs a couple of times the screen colours went funny:-{
Then following day after charging just a plain white screen.
Have tried to load DFT HSLP2 for HTC Leo software but get the same error msg as below.
I've contacted my phone insurance and they are sending out a claim form and it'll cost me £30 and take 10 days if they approve the repair/replacement.
If I can fix quicker myself I'll have a go as I really need my phone asap
Any help appreciated.
mishaquae said:
With the power off, press and hold the Volume Down button and then tap the Power button. Tell us what you see.
First of all, the 3 colors screen (Red, Green and Blue) with the following info:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
And
In the bottom (the white area), I can see the "Serial" title but if connected to the PC "USB".
In addition to this, if I start running DFT HSLP2 for HTC Leo software under the colores screen, I can select which SPL I required, if select SPL 1.42 I'll get the following error:
DFT HSPL2 for HTC Let (the title box)
Crirical Error
Flow:00000006
Error Code: 00000014
Description:Unknown
Have you done anything to the phone between the fault and the previous switch on? Have you removed the battery? (No)
Thanx for your attention.
Click to expand...
Click to collapse
Hello bro,
@mishaquae i am also having the same problem with my hd2. If ur phone is working now could u please post how u did it.
Hi there
I had the same problem , I fixed it by using golden card. see the link below.
http://forum.xda-developers.com/showthread.php?t=622397
Hello all!
A friend of mine gave a Mozart today for repair. The glass is broken bad but the LCD is intact! The phone itself behaves very strange! When I power it ON (or plug the AC charger/USB Cable) The HTC Logo appears and sits there for around 15 - 20 secs then it reboots itself and the process repeat itself till I unplug the cable. Then it just turns off.
Bootloader works!
I tried to factory reset it (both volume buttons at power on) it didn't help!
I flashed the official Mango RUU but the problem persists!
The phone have not been modified by any way (HSPL, Custom ROMS etc.)
Ideas?
just send it to the service center, lucky if the warranty still exists. If the warranty dead already, then I think it's okay to spend a little money for the beloved mozart. currently, I have no idea what should you do.. If I were you, I would possibly done that. Either way it goes, seems that it needs an original hTC 7 Mozart's Display screen. (If you see hTC on below the main speaker, the hTC is written in the screen's display)..
I already ordered the screen and I'll change it no problem. The thing that is bothering me is why the phone wouldn't start like it should!
Update!
I've just replaced the digitaizer but the problem persist! The phone boots, shows the HTC logo, stays that way for some seconds and either reboots (if connected to cable USB/AC) or just turns off (in not connected) Bootloader works! I even HSPL the device and tried some custom ROMs. Every time the same thing! Before the HSPL I tried some official RUUs but no change! Some times while holding some of the keys I'm able to make it show the ZUNE Update screen! ( the black screen with a PC and a phone waiting to connect) then ZUNE tells me that there is no restore point (which is right) and tells me that I can disconnect the phone!
HELP!
dear friend
go to the original rom.
i had the same problem with the booting.
HTC Titan II stuck in boot loop
My windows phone's battery discharged and when I tried to re-charge, it just flashes white screen then vibrates over and over? I tried to hard reset by holding power, camera and down volume but didn't solve the problem. After about half an hour it shuts down completely and doesn't seem to be taking a charge ( No lights and no heat ) The phone is only a couple of months old so not thinking its a bad battery but could be wrong?
don't worry!
siber6 said:
HTC Titan II stuck in boot loop
My windows phone's battery discharged and when I tried to re-charge, it just flashes white screen then vibrates over and over? I tried to hard reset by holding power, camera and down volume but didn't solve the problem. After about half an hour it shuts down completely and doesn't seem to be taking a charge ( No lights and no heat ) The phone is only a couple of months old so not thinking its a bad battery but could be wrong?
Click to expand...
Click to collapse
Simply because I think that the battery is completely free of charge.and battery can't power device
Hi there,
Something weird happened with my HTC Titan (Windows Phone 7.8) today. when using the phon I noticed that the soft keyboard wasn't accepting any input. So I did a soft reset by holding the power button, but the phone seemed like it got stuck in the 'goodbye' screen.
So I took the battery off in order to make a hard reset.
when I put the battery back in and turned the phone on, now it shows the HTC logo, followed by the carrier logo (Vodafone) but then it get stuck there -- Nothing else happens (I should have seen the Windows Phone logo next).
I have no idea what to do. Could someone please advise?
Thanks,
P.
power switch
replace the power switch it causes the phone to reboot again and again