My battery isn't charging with either the mains charger or usb so it looks like I need to send back to 3 under warranty
Problem is that I've installed the Cognition ROM (which is awesome!) so I need to somehow get the phone back to stock before I return it. Whatever is causing the charging problem is has also stopped the usb working. So obviously I can't put the files onto the internal memory without the usb Can flash it back to a stock rom using CWM by putting the rom on the 'external' SD card?
If that is possible there branded stock roms on the Intratech thread but these all appear to need to be flashed with Odin. Are there CWM versions anywhere?
http://forum.xda-developers.com/showthread.php?t=1113928
Incidentally, if I plug the mains charger or usb lead in to the phone while it is powered off it switches itself on and boots up without me pressing the power button? But it still doesn't charge and the pc still can't see it via usb.
Thanks
Steve
mrchilly said:
My battery isn't charging with either the mains charger or usb so it looks like I need to send back to 3 under warranty
Problem is that I've installed the Cognition ROM (which is awesome!) so I need to somehow get the phone back to stock before I return it. Whatever is causing the charging problem is has also stopped the usb working. So obviously I can't put the files onto the internal memory without the usb Can flash it back to a stock rom using CWM by putting the rom on the 'external' SD card?
If that is possible there branded stock roms on the Intratech thread but these all appear to need to be flashed with Odin. Are there CWM versions anywhere?
http://forum.xda-developers.com/showthread.php?t=1113928
Incidentally, if I plug the mains charger or usb lead in to the phone while it is powered off it switches itself on and boots up without me pressing the power button? But it still doesn't charge and the pc still can't see it via usb.
Thanks
Steve
Click to expand...
Click to collapse
Did you try if is working in download mode?
Yes, but unfortunately it isn't being seen by the pc even in download mode
mrchilly said:
Yes, but unfortunately it isn't being seen by the pc even in download mode
Click to expand...
Click to collapse
Also you can try usb jig
I have a jig an it does recognise that. Well, it was recognised and let me clear the number of flashes. At the risk of sounding silly can I do anything else with the jig?
mrchilly said:
I have a jig an it does recognise that. Well, it was recognised and let me clear the number of flashes. At the risk of sounding silly can I do anything else with the jig?
Click to expand...
Click to collapse
You can find more on youtube about usb jig and how is use it
mrchilly said:
I have a jig an it does recognise that. Well, it was recognised and let me clear the number of flashes. At the risk of sounding silly can I do anything else with the jig?
Click to expand...
Click to collapse
Could you try another usb charger/cable?
htc9420 said:
Could you try another usb charger/cable?
Click to expand...
Click to collapse
I've tried both the mains charger and the usb charging lead and neither work. As the usb->pc connection isn't working either I'm assuming it must be a fault with the phone.
mrchilly said:
Can flash it back to a stock rom using CWM by putting the rom on the 'external' SD card?
If that is possible there branded stock roms on the Intratech thread but these all appear to need to be flashed with Odin. Are there CWM versions anywhere?
http://forum.xda-developers.com/showthread.php?t=1113928
Click to expand...
Click to collapse
Any thoughts or ideas on this guys?
Yes, I've got exactly the same issues, but thankfully I'm on stock software including kernel having swapped in an insecure kernel for rooting. USB jig worked to reset counter but unable to connect to any pc with any cable in odin or normal. Can do kies over wifi and kies recognised me as having stock and up to date firmware.
Can anyone help me get out of root from this position? The only visible evidence of root to me is the superuser app. Would a factory reset do the trick? Thanks
Sent from my GT-I9100 using XDA App
drspikes said:
Yes, I've got exactly the same issues, but thankfully I'm on stock software including kernel having swapped in an insecure kernel for rooting. USB jig worked to reset counter but unable to connect to any pc with any cable in odin or normal. Can do kies over wifi and kies recognised me as having stock and up to date firmware.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Are you having charging problems with your phone too?
No, thankfully that's the only thing left working. There are other threads with this problem popped up in the last week. Seen our wonderful s2 has a weakness with the usb soldering to the board.
Sent from my GT-I9100 using XDA App
I've ordered a spare battery and a charging dock so that I can try to bring it back to life and reset it to factory.
I'd really appreciate it if someone could help with how to re-stock it without usb
Bump - please help us!
I'm having the same problem except the charging problem. But in the end i was able to flash back to stock rom using Odin while USB debugging was on. Fortunately Odin did recognise my phone.
Yesterday i ordered the JIG so i can set back the counter and then i will send my phone back for repair.
My problem is that I can't connect to usb to restock the rom. However I have managed to reset the counter using a jig. Why it recognises the jig but not usb I have no idea??
I'm going to have to return the phone for repair with the Cognition rom installed
What's Samsung's (UK) policy is on this kind of thing is?
mrchilly said:
My problem is that I can't connect to usb to restock the rom. However I have managed to reset the counter using a jig. Why it recognises the jig but not usb I have no idea??
I'm going to have to return the phone for repair with the Cognition rom installed
What's Samsung's (UK) policy is on this kind of thing is?
Click to expand...
Click to collapse
Officially no warranty .
You take your chance and hope custom rom and root is not noticed or ignored .
If that is possible there branded stock roms on the Intratech thread but these all appear to need to be flashed with Odin. Are there CWM versions anywhere?
http://forum.xda-developers.com/show....php?t=1113928
NO Odin only .
Dont know if anyone has a CWM repair rom built .
JJEgan said:
Officially no warranty .
You take your chance and hope custom rom and root is not noticed or ignored .
Click to expand...
Click to collapse
Oh dear, looks like I'm just going to have to take my chance and send it in for repair. I've seen a few posts about the usb port lately. I hope this isn't going to be a common fault or there are going to be a lot of us facing warranty issues
i dont really know much about this area.. but if it was me i think id download the generic firmware put on sdcard.. and install via cmw ... then after that is on , possibly root if its not rooted uninstall cmw then superuser . then take root off.. do full wipes ect... after all this.
only problem is.. your count will show it has been flashed.
am not (100%) sure if it works like this.. but its just a guess and the closest i can think of a way for it to work.. hope you get it sorted ..
Sent from my GT-I9100 using XDA Premium App
Hm, an idea comming to mind about reflashing stock ROM - but be very carefull, got only one shot at this (due to loosing root, so w/o Odin, no way for a 2nd try if something doesn't work!)
Untar an Odin .tar FW pack and convert the .img files to actual raw .img dumps.
You only need the simg2img tool from this thread:
http://forum.xda-developers.com/showthread.php?t=1081239
Copy the converted factoryfs.img (should be exactely 512MB) and the zImage to the sdcard via WiFi.
Then flash those two using good, old dd from a terminal:
Code:
su
dd if=/sdcard/zImage of=/dev/block/mmcblk0p5 bs=4096
dd if=/sdcard/factoryfs.img of=/dev/block/mmcblk0p9 bs=4096
That should drop you back to a stock ROM.
Since you're sending it in for repait anyways, if the above totally fails, just say it broke during a Kies update.
Related
Hi,
Im a first time poster and I have read through the development forum about the usb jig to reset the counter.
I have a galaxy s2 and I was wondering if its possible to do it without a jig? I have reflashed my stock firmware however the count still says (2) I read a post in the development forum that its possible to flash to stock and reset.I would appreciate your help.
You need a jig to reset it. The hole point of the counter is to keep track of unofficial flashes even if a stock rom is flashed back on.
Now why would people be buying and selling USB jigs to reset their count if it could be done without a jig?
you need a jig ! I made one for myself. It's really quite easy if you know how to solder.
Doing your job with a jig would be done faster than creating this thread.
Get a Usb Connector, stick it into the phone, hold a resistor on pin 4 and 5 and you are done. Took me 5 seconds
I have a malfunction usb connector so usb data transfer or my jig is not working anymore. Surprisely the 3key download mode is working, and firmware flash with odin too.
So I need an alternate way to reset the counter before I send it back to warranty service
Is it stored in the bootloader? Can I reflash it with odin?
KeFe said:
I have a malfunction usb connector so usb data transfer or my jig is not working anymore. Surprisely the 3key download mode is working, and firmware flash with odin too.
So I need an alternate way to reset the counter before I send it back to warranty service
Is it stored in the bootloader? Can I reflash it with odin?
Click to expand...
Click to collapse
If the micro/mini usb plug isn't working, it won't matter if you have flashed any custom roms. (I mean for the warranty)
There are 2 seperate warranties, one is the actual device and the other is OS stuff (I believe)
Try this.
Remove battery, insert jig, put battery back in.
This method got it to reset when just insertion of the jig did not turn the phone on.
Sent from my GT-I9100 using XDA App
bruflot said:
If the micro/mini usb plug isn't working, it won't matter if you have flashed any custom roms. (I mean for the warranty)
There are 2 seperate warranties, one is the actual device and the other is OS stuff (I believe)
Click to expand...
Click to collapse
Highly unlikely that a product has two separate warranty and certainly would be new idea .
Where there nay be two distinct warranty's is one the seller warrants the phone for twelve months that includes original firmware .
Two is the separate cover Samsung give for one or two years .
Pointless manufacturing a rom counter if its not for some specific use and as Samsung have stated rooting and custom roms invalidate warranty then that's what its for .
Will service centre take any notice of a custom rom or root is an entirely different matter especially as few of them are actually Samsung .
Simple to solve the problem but id a user cannot then they just have to a take a chance . After all life is 5/4 against .
jje
I am using a usb jig but my count will not reset to zero.
fadsarmy said:
I am using a usb jig but my count will not reset to zero.
Click to expand...
Click to collapse
That's because either your usb jib is faulty. Or you flashed a 2.3.5 rom w/o reading the warning signs that the new bootloader prevents the jig from working.
Some of the latest ROMs have a new bootloader that apparently disables the jig. Intratech's thread has ROMs that use the old bootloader so that you can continue to use the jig.
fadsarmy said:
I am using a usb jig but my count will not reset to zero.
Click to expand...
Click to collapse
Could be 1 of 4 things
1-USB plug faulty (if phone boots unlikley)
2-Jig faulty (if phone boots unlikley)
3-You have flashed the new 2.3.5 with new bootloader (non-wipe bin counter)
4-Your phone is turned on when you plug it in.(phone needs to be switched off)
fadsarmy said:
I am using a usb jig but my count will not reset to zero.
Click to expand...
Click to collapse
have a look here about half way down the page in big red writing it tells you how to flash old bootloader, I followed it and now its 0
http://forum.xda-developers.com/showthread.php?t=1075278
Excellent, Thanks
I have a malfunction usb connector so usb data transfer or my jig is not working anymore. The data cable and the jig is tested on another I9100, and they worked well. Surprisely the 3key download mode is working, and firmware flash with odin too.
So I need an alternate way to reset the counter before I send it back to warranty service
Is it stored in the bootloader? Can I reflash it with odin?
KeFe said:
I have a malfunction usb connector so usb data transfer or my jig is not working anymore. The data cable and the jig is tested on another I9100, and they worked well. Surprisely the 3key download mode is working, and firmware flash with odin too.
So I need an alternate way to reset the counter before I send it back to warranty service
Is it stored in the bootloader? Can I reflash it with odin?
Click to expand...
Click to collapse
there is no known alternative way of resetting the counter, if it was as simple as using odin then we would have never worried about using a jig.
So then what is the best way to make a total brick? (result: no 3key recovery or download mode)
I should mess with the bootloader in odin?
KeFe said:
So then what is the best way to make a total brick? (result: no 3key recovery or download mode)
I should mess with the bootloader in odin?
Click to expand...
Click to collapse
LOL!! This is the reverse "I bricked my phone" thread. It's the first time I've seen someone asking how to brick their phone.
I suggest you look at the above mentioned "Hallppz!! I broked mi fonnee" threads and do exactly what they did to brick their phones. Stuff like flashing SGS firmware on SGS2 can help.
aydc said:
LOL!! This is the reverse "I bricked my phone" thread. It's the first time I've seen someone asking how to brick their phone.
I suggest you look at the above mentioned "Hallppz!! I broked mi fonnee" threads and do exactly what they did to brick their phones. Stuff like flashing SGS firmware on SGS2 can help.
Click to expand...
Click to collapse
Can help, but will be detectable. just start a flash with odin and unplug halfway through, you'll get a connect to pc screen and wont be able to acces download mode
It is the first destructive thread in this forum, isn't it?
dh2311 said:
Can help, but will be detectable. just start a flash with odin and unplug halfway through, you'll get a connect to pc screen and wont be able to acces download mode
Click to expand...
Click to collapse
Thx
I'll try it tomorrow in the evening unless somebody comes up with a better idea.
I'll post here the result
AFAIK, samsung service center won't check for "flashed" phones. When I returned my SGS2(just cf-rooted), they said I should return after 30mins because they'll flash it back to default(They didn't even check, they just said that while I was still filling-up their repair form). But my yellow tint was still there, so I got a new phone. Now no yellow tint visible on the eyes.
gr8... hope i
dont hav to visit warrnty ever..
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
I've a I9100 and for certain hardware issue (Audio problem) I want to send it to the Service Center.
I tried different custom ROMs before coming back to 2.3.3 KE8 through ODIN as I realized the hardware issue was not gonna fix without sending it for repair or replacement.
Now, I bought USB Jig from Ebay and followed the instructions in the USB Jig FAQ thread but after switching the phone off and inserting the USB Jig it is not booting into the Download Mode ? Is the USB Jig not working ?
Or do I need to flash an old bootloader to get this working , if yes a link please ?
Yes most probably thats a bootloader issue...get an old bootloader from the Original Dev Subsection.
Mine for some reason doesn't automatically boot when the jig is inserted but it does do it's job when I just use the power button to switch on.
Then it boots into download mode and resets triangle and flash counter.
Don't know why. I bought it for my sgs1 so maybe thats something.
Anyway try doing it that way and see how you go.
Sent from my GT-I9100 using XDA App
I flashed the old bootloader posted in the intratech's thread here Still its not booting up.
And also, I tried inserting the Jig and then powering on manually that didn't work as well.
What now ?
Some peoples have posted on other forums about the USB jig doesn't work automatically when inserted (although it should...) Try inserting the jig, and powering your phone on. It should reset the flash counter, if you are trying to get rid of the triangle for "warranty" purposes
Are you close to any of these people?
http://forum.xda-developers.com/showthread.php?t=1495867
Might be able to try a different jig just in case it's a dud.
Sent from my GT-I9100 using XDA App
tricurious said:
I've a I9100 and for certain hardware issue (Audio problem) I want to send it to the Service Center.
I tried different custom ROMs before coming back to 2.3.3 KE8 through ODIN as I realized the hardware issue was not gonna fix without sending it for repair or replacement.
Now, I bought USB Jig from Ebay and followed the instructions in the USB Jig FAQ thread but after switching the phone off and inserting the USB Jig it is not booting into the Download Mode ? Is the USB Jig not working ?
Or do I need to flash an old bootloader to get this working , if yes a link please ?
Click to expand...
Click to collapse
2.3.3 KE8 Has the old the old bootloader so no need to replace it..
Try cleaning the usb port with a spray duster or tooth brush and try jig again.. Also you may be unlucky with a DOA Jig...
Hey I just couldn't get the USB Jig working so I had no other option but to try the riskier method.
So, I updated to ICS (Resurrection Remix 9.3) and used TriangleAway and it worked. Then I flashed the Stock Rom by using Mobile Odin.
So now the phone is as "Factory'd" as possible and I'll be taking it to the service center tomorrow
@ All above, thanks for helping
aceofclubs said:
Are you close to any of these people?
http://forum.xda-developers.com/showthread.php?t=1495867
Might be able to try a different jig just in case it's a dud.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
No unfortunately I wasn't. The closest one was 540 Miles away
tricurious said:
Hey I just couldn't get the USB Jig working so I had no other option but to try the riskier method.
So, I updated to ICS (Resurrection Remix 9.3) and used TriangleAway and it worked. Then I flashed the Stock Rom by using Mobile Odin.
So now the phone is as "Factory'd" as possible and I'll be taking it to the service center tomorrow
@ All above, thanks for helping
Click to expand...
Click to collapse
I'm glad you managed to remove the Triangle and restored to the stock rom,but what about the rom counter? The Service guys will surely check for the rom counter....you managed to reset that too?
yashleo21 said:
but what about the rom counter? The Service guys will surely check for the rom counter....you managed to reset that too?
Click to expand...
Click to collapse
Yeah the "TriangleAway" app resets the Binary Counter too
Seems like a dud jig to me. Mine automatically boots into download mode, regardless of bootloader.
Sent from my GT-I9100T
I had these issues - installed the old bootloader and away went the yellow triangle after inserting the USB Jig.
The counter would not reset but I found a "GT-I9100_counter_patch.tar" file which I flashed (PDA) and then inserting the USB Jig it reset the binary counter to zero
PM me if you would like the patch file
While flashing Odin stuck at zImage... I disconnected the phone from PC. Now i cant enter neither the DL mode, nor recovery... Important thing that the PC still see the phone when connected (Odin too (yellow indicates)). i9100g. Can someone help?
If the flash stalled is it possible you were flashing an incompatible firmware for your phone? I9100G has different firmware yo the I9100/T.
Anyway, my suggestion is if uoi definitely can't get into download mode then maybe try using a jig to force it. But I suspect that may also not work.
You say the PC picks up the phone when you connect it. Does that mean it boots up?
Sent from my GT-I9100T
sxi200 said:
If the flash stalled is it possible you were flashing an incompatible firmware for your phone? I9100G has different firmware yo the I9100/T.
Anyway, my suggestion is if uoi definitely can't get into download mode then maybe try using a jig to force it. But I suspect that may also not work.
You say the PC picks up the phone when you connect it. Does that mean it boots up?
Sent from my GT-I9100T
Click to expand...
Click to collapse
No, the phone doesnt boot. Maybe i used bad cable for flash process... because i used different kind of usb-cable (not samsung). Is there any solution without jig?
p.s.: i was trying this) http://forum.xda-developers.com/showthread.php?t=1506954
qn-ram said:
No, the phone doesnt boot. Maybe i used bad cable for flash process... because i used different kind of usb-cable (not samsung). Is there any solution without jig?
Click to expand...
Click to collapse
Cable shouldn't be a problem. I've used many different ones without problem. Were you flashing the correct file for your model?
Edit: just checked the link and it is for i9100G.
Sent from my GT-I9100T
Were you using the tar version? If so where did you put it in Odin and did you tick anything else (eg bootloader)?
Sent from my GT-I9100T
sxi200 said:
Cable shouldn't be a problem. I've used many different ones without problem. Were you flashing the correct file for your model?
Edit: just checked the link and it is for i9100G.
Sent from my GT-I9100T
Click to expand...
Click to collapse
This means i was right. ROM is capable for my i9100G)
sxi200 said:
Were you using the tar version? If so where did you put it in Odin and did you tick anything else (eg bootloader)?
Sent from my GT-I9100T
Click to expand...
Click to collapse
was using tar. in the pda section. didnt touch any checkboxes or something else
Yeah should have been fine then. Can't see why download mode won't work because you haven't touched the bootloader. Maybe try removing then re-inserting the battery, then use the 3 buttons for download mode.
Sent from my GT-I9100T
sxi200 said:
Yeah should have been fine then. Can't see why download mode won't work because you haven't touched the bootloader. Maybe try removing then re-inserting the battery, then use the 3 buttons for download mode.
Sent from my GT-I9100T
Click to expand...
Click to collapse
already tried... no effect. while flashing Odin stucked at zImage. after 30 min waiting i switched off the cable. Odin showed red message (fail)
Well if all else fails, next step may be a jig. It can be a pain if you don't have one but check in the general section. There is a thread about users (including myself) who are willing to help people who urgently need to use a jig. There are heaps of countries listed so if your lucky you may find someone close by who will help.
EDIT: here is the link to the thread. Check the first post for locations.
http://forum.xda-developers.com/showthread.php?t=1495867
Sent from my GT-I9100T
sxi200 said:
Well if all else fails, next step may be a jig. It can be a pain if you don't have one but check in the general section. There is a thread about users (including myself) who are willing to help people who urgently need to use a jig. There are heaps of countries listed so if your lucky you may find someone close by who will help.
Sent from my GT-I9100T
Click to expand...
Click to collapse
thx, i ll wait 4 some time. mb somebody showes another way to solve this sh*t)
OP, are you plugged directly into a USB port on the PC? Not through a keyboard pass-through, or a USB hub, or something similar? I've heard of stalled flashes because the person was not plugged directly into the PC.
The other thing, is to try a different USB cable. Faulty cables can also cause stalled flashes.
ctomgee said:
OP, are you plugged directly into a USB port on the PC? Not through a keyboard pass-through, or a USB hub, or something similar? I've heard of stalled flashes because the person was not plugged directly into the PC.
The other thing, is to try a different USB cable. Faulty cables can also cause stalled flashes.
Click to expand...
Click to collapse
no usb hubs or other similiar stuff. tell me how to use another (original) cable if I CANT ENTER THE RECOVERY???
qn-ram said:
no usb hubs or other similiar stuff. tell me how to use another (original) cable if I CANT ENTER THE RECOVERY???
Click to expand...
Click to collapse
When you originally flashed in Odin did you you do so from recovery or download mode?
Sent from my GT-I9100T
sxi200 said:
When you originally flashed in Odin did you you do so from recovery or download mode?
Sent from my GT-I9100T
Click to expand...
Click to collapse
download mode)
qn-ram said:
download mode)
Click to expand...
Click to collapse
**** man! Something is not right. Flashing a kernel in download mode as pda shouldn't fully brick your phone. I've had plenty of bad flashes before but download mode always works. Other than retrying for download mode or jig, I'm out of ideas.
Sent from my GT-I9100T
sxi200 said:
**** man! Something is not right. Flashing a kernel in download mode as pda shouldn't fully brick your phone. I've had plenty of bad flashes before but download mode always works. Other than retrying for download mode or jig, I'm out of ideas.
Sent from my GT-I9100T
Click to expand...
Click to collapse
will sdk tools or something make sense?)
qn-ram said:
no usb hubs or other similiar stuff. tell me how to use another (original) cable if I CANT ENTER THE RECOVERY???
Click to expand...
Click to collapse
WHAT DOES RECOVERY HAVE TO DO WITH FLASHING???
You have other posts in this thread that imply you were able to try flashing again. If that's not the case, than I misinterpreted, and sorry I tried to troubleshoot your problem and suggest a course of action.
I'm sure you're frustrated, but that is no reason to snap at people trying to help you.
ctomgee said:
WHAT DOES RECOVERY HAVE TO DO WITH FLASHING???
You have other posts in this thread that imply you were able to try flashing again. If that's not the case, than I misinterpreted, and sorry I tried to troubleshoot your problem and suggest a course of action.
I'm sure you're frustrated, but that is no reason to snap at people trying to help you.
Click to expand...
Click to collapse
sry. thought that recovery->dl mode. thx 4 ur help
qn-ram said:
sry. thought that recovery->dl mode. thx 4 ur help
Click to expand...
Click to collapse
Recovery mode and Download mode are not the same. Flashing can only happen in Download mode.
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Edit: Samsung service has replaced the mother board!!
Doing the pit partition has resulted in my phone getting bricked!!
So people new to the forum, never do it :laugh:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
CashAndPotatoes said:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
Click to expand...
Click to collapse
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Pradeep said:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Click to expand...
Click to collapse
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Gediprime said:
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Click to expand...
Click to collapse
If you can access download mode, use it. Try re-flashing your kernel.
nikufellow said:
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Click to expand...
Click to collapse
JIG ???
Gediprime said:
JIG ???
Click to expand...
Click to collapse
Use the search button and use keywords "usb jig". Or google.
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Click to expand...
Click to collapse
I am sorry!! I am new to this forum and the phone being a recent purchase, i was very much desperate!!
I know the answer may not be different and the problem may not be new hence I've asked to guide me to the appropriate thread in my post!! No offence!!
Thanks for your reply. I will be taking the phone to Samsung Service tomorrow.
Gediprime said:
JIG ???
Click to expand...
Click to collapse
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
If you can access download mode, use it. Try re-flashing your kernel.
Click to expand...
Click to collapse
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Gediprime said:
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
Click to expand...
Click to collapse
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Pradeep said:
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Click to expand...
Click to collapse
You are misinterpreting what you read. What you're referring to is resetting the binary counter, and no it doesn't work on ICS bootloader however it still works for putting device into download mode (unless its bricked).
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
"Soft-brick" has absolutely no meaning, Your device is either "bricked" or it isnt. Its a made up term by n00bs when they cant get system to boot normally. Your devcie is only bricked when it wont power on or go into useable recovery+download modes. If you can simply use a jig or go directly into flashing a rom then your device is not bricked.
The "bricked" term is used far too loosely nowadays.
Pradeep said:
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Click to expand...
Click to collapse
Your phone died? you kiding ?
I'm using the leak version of Sammobile since 3 weeks... Why do you think the phone make a bad reaction now? why now?
Ok, you try to flash OFW and don't result. and then you flash again the XXLSJ ? and the phone colaspe?
What kind of roms do i flash? OFM or CFW ? ICS or JB ?
Well if a can connect with ODIN of course
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Pradeep said:
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Click to expand...
Click to collapse
Yes its possible which is the reason we already mentioned to try it
It all depends on the actual base issue though as to whether it will work. Its worth a try either way though, They only cost £1-2 or you can make them yourself if you have the spare parts. (Don't ask how, Use search).
I have tried the JIG, but no luck!!
I have given the phone to Samsung Service.
Hope they fix it!!
Will they use JTAG or it has to be done somewhere else in case Samsung people refuse to do it??
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
nikufellow said:
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
Click to expand...
Click to collapse
Thanks!! Well I did act dumb there!! Said I downloaded a game Royal Revolt (~200 MB), the phone got heated, blah blah blah......
Well I did not tell about firmware upgrade via kies and all....
Only thing that I can do now is wait and hope!!:laugh: