Related
hi im having trouble getting CWM to work on my Rogers (GT-P7500R) WIFI+4G to accept CWM, I have trying to flash it and it sends my galaxy tab into a boot crash...I had to to restore it to stock kernel with ODIN 1.85 which worked fine, but still on the stupid default recovery (I HATE IT). as soon as I try and flash it with the CWM it simply turns off the tablet and then when I power on again, it shows the samsung galaxy tab logo for a second and then turns off again, then i use odin to flash stock and it works normal again, no data lost at all...any help plz, cause without CWM im pretty sure i cannot do other stuff like custom rom, kernels, overclocking...HELP!!!!!!!!!! im pretty sure this has a signed only bootloader right?? thats why i need something other then 3e recovery to be able to flash stuff
FIXED!!!!
so see below
Good work
Keep us posted! I pick mine up tonight and will be following your foot steps haha thanks for the info so far.
Hi,
so here is how to get clockworkmod on the samsung galaxy tab 10.1 (GT-P7500R)...I looked around XDA for hours before finding some useful info...here it is:
Step 1
download these files:
http://www.4shared.com/file/KbSJhFtI/recovery-cwm_4004-sam-tab-101t.html
and
http://www.4shared.com/rar/74D8ERjO/Odin_v185.html
Step 2
extract the odin zip file and run odin, by right clicking first and say run as administrator...reboot the phone into download mode (ask me if u do not know how , there will be a warning and then a screen with some text in the upper left, connect you device to the usb, and back in odin select the bootloader check box and click browse to the right and select the other recovery-cwm file u downloaded and click start, it should take a short time and you will see a progress bar on the screen...viola, you will have clockworkmod
OPTIONAL: if you want to root it at this time, just follow below:
Download this file:
http://www.4shared.com/zip/cVgtnw_t/Galaxy_root.html
Step 3
put the file in root of the device and reboot into recovery mode (ask me if u do not know how and select update from zip and select the file, then its done and done.
OPTIONAL: if you want to put a custom kernal on, so that you can overclock it to 1.4 ghz, like I have then follow below...it worked and works fine for me
Download this file:
http://www.4shared.com/zip/vWdGcQcr/boot-cm_26364_p4_ux_hc32-oc-xt.html
and follow from step 3 again.
PS: I also have a stock kernal for the rogers edition of the galaxy tab if needed, if u mess it up in the future
Overcome has a good working version of cwm and custom rom that install easily on the Rogers Tab -- the OC kernel by Pershoot works fine. The custom rom by Genbarou also installs well.
Im also on XDA on my tab too...
Sent from my GT-P7500R using xda premium
Help.. XDA'er In Need...
theandroidnerd said:
Hi,
so here is how to get clockworkmod on the samsung galaxy tab 10.1 (GT-P7500R)...I looked around XDA for hours before finding some useful info...here it is:
Step 1
download these files:
http://www.4shared.com/file/KbSJhFtI/recovery-cwm_4004-sam-tab-101t.html
and
http://www.4shared.com/rar/74D8ERjO/Odin_v185.html
Step 2
extract the odin zip file and run odin, by right clicking first and say run as administrator...reboot the phone into download mode (ask me if u do not know how , there will be a warning and then a screen with some text in the upper left, connect you device to the usb, and back in odin select the bootloader check box and click browse to the right and select the other recovery-cwm file u downloaded and click start, it should take a short time and you will see a progress bar on the screen...viola, you will have clockworkmod
OPTIONAL: if you want to root it at this time, just follow below:
Download this file:
http://www.4shared.com/zip/cVgtnw_t/Galaxy_root.html
Step 3
put the file in root of the device and reboot into recovery mode (ask me if u do not know how and select update from zip and select the file, then its done and done.
OPTIONAL: if you want to put a custom kernal on, so that you can overclock it to 1.4 ghz, like I have then follow below...it worked and works fine for me
Download this file:
http://www.4shared.com/zip/vWdGcQcr/boot-cm_26364_p4_ux_hc32-oc-xt.html
and follow from step 3 again.
PS: I also have a stock kernal for the rogers edition of the galaxy tab if needed, if u mess it up in the future
Click to expand...
Click to collapse
I was able to load the CWM Recovery onto my Rogers 4G Tab, however I flashed with the files from here initially:
http://forum.xda-developers.com/showthread.php?t=1171089
using the 4G Recovery and Kernel files. This created nothing but boot loop. I was then able to use the CWM file from this post and get CWM to boot however that is all I can do at this time.
I cannot get the device to connect to PC for usb storage (to potentially load a bootable rom) while in CWM as it says "unable to open ums lunefile (no such file or directory).
I believe the kernel.zip file from the other post has messed up my device. Does anyone have a Stock Rogers Kernel, or custom that is flashable via ODIN so I can at least get back to Android OS and load a Rom via USB?
Also can someone repost the Galaxy_root.zip file. I cant download from 4shared. Keeps timing out to file not found. THANKs
macknup said:
I was able to load the CWM Recovery onto my Rogers 4G Tab, however I flashed with the files from here initially:
http://forum.xda-developers.com/showthread.php?t=1171089
using the 4G Recovery and Kernel files. This created nothing but boot loop. I was then able to use the CWM file from this post and get CWM to boot however that is all I can do at this time.
I cannot get the device to connect to PC for usb storage (to potentially load a bootable rom) while in CWM as it says "unable to open ums lunefile (no such file or directory).
I believe the kernel.zip file from the other post has messed up my device. Does anyone have a Stock Rogers Kernel, or custom that is flashable via ODIN so I can at least get back to Android OS and load a Rom via USB?
Also can someone repost the Galaxy_root.zip file. I cant download from 4shared. Keeps timing out to file not found. THANKs
Click to expand...
Click to collapse
I dont know if this will help but you need to know that its not a 4G, its actually 3G+ so if you want to root, dont use the 4G method
I installed the cwm without any problem by following this thread:
http://forum.xda-developers.com/showthread.php?t=1171089
and by following this :
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
I was unable to even get the device to recognize by PC. I could not load any zip files. Luckily I found a P7105 fille ODIN file that I was able to load. however it is a WIFI ONLY version I have. However it has enabled me to boot back to android and load files via usb. I am going to try OVERCOME 10.1 and hope that applies the necessary root as well as 3G access.
will report back
macknup said:
I was unable to even get the device to recognize by PC. I could not load any zip files. Luckily I found a P7105 fille ODIN file that I was able to load. however it is a WIFI ONLY version I have. However it has enabled me to boot back to android and load files via usb. I am going to try OVERCOME 10.1 and hope that applies the necessary root as well as 3G access.
will report back
Click to expand...
Click to collapse
Can confirm. Installing CWM then flashing Overcome FULL did wonders. Back up and running. 3.2 android and 3G+ service active.
WAAAHHOOOO! XDA to the rescue!
Some rom?
Hello, thanks for the tutorial, I'm from Venezuela and I have a 7500R if anyone needs Spanish translation let me know. Will you have some rom recommended for a 7500R
Sorry for my English.
I want to confirm that rooting method post here work great.
(This is the only part you need)
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
Note 1: The downloaded file is not named Root.zip. You can of course rename it yourself.
Note 2: To enter recovery mode, after you use vol- to highlight the recovery icon, power button didn't seem to work in selecting it. But you just wait for a min, it'll work.
Note 3: It only takes seconds to load and run the Root.zip. Then you are good to reboot, and it's done.
------
My GT10.1 -
Rogers GT-P7500R
Android 3.2 P7500RUXKK2 (stock; now rooted)
GT-P7500R
i need to go back to stock os i find some that say stock but when i go into my STATUS my IMEI is UNKNOW IMEI SV is UNKNOW the sim card not reading please help
To all you that dont get past the boot logo screen , because of wrong flashing !!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you dont have CWM do this > *Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
If this failes due to missing pit file try this tar >http://www.mediafire.com/?88vjjh50vqetxab
Now you successfully installed CWM + Super User + CWM Manager.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here's the hole package then!
Darkyrom s3 (latest) + cwm revovery tar + odin 1.85
After CWM install with tar file, drop the rom file on sd boot to CWM install !!
Then get rom files here on XDA and flash
http://speedy.sh/HNtUV/Galaxy3-darkyrom-cwm-tar-odin.zip
Greetz
Hi spoonymoon nice guide!
Changing your thread title would pretty be a good start to get your thread exposed, that way you can also help a wider range of users. :good::good::good:
cheers
i just rooted for the 1st time with cwm then i was able to switch it to twrp. then i made a backup, then installed CM10. but i failed badly...i never deleted the 2 caches.
nor did i wipe it / reset it, for fear i would lose all my settings/apps/contacts/etc... i know i have the backup but i still didn't think it was necessary.
can anyone tell me where i go from here?
i tried holding down all 3 buttons, it just vibrates, then reboots and starts the loop again. i went into recovery mode with vol down & power buttons. since i don't have a tar file for twrp, i had to go with the tar file from odin. then it rebooted but it went back to the loop.
i just pulled the battery out and let it sit for a minute. turned it on and it is still CM10 looping.
thanks in advance for any advice!
ARTAQaf said:
i just rooted for the 1st time with cwm then i was able to switch it to twrp. then i made a backup, then installed CM10. but i failed badly...i never deleted the 2 caches.
nor did i wipe it / reset it, for fear i would lose all my settings/apps/contacts/etc... i know i have the backup but i still didn't think it was necessary.
can anyone tell me where i go from here?
i tried holding down all 3 buttons, it just vibrates, then reboots and starts the loop again. i went into recovery mode with vol down & power buttons. since i don't have a tar file for twrp, i had to go with the tar file from odin. then it rebooted but it went back to the loop.
i just pulled the battery out and let it sit for a minute. turned it on and it is still CM10 looping.
thanks in advance for any advice!
Click to expand...
Click to collapse
You can try using odin and flashing the twrp tar file and you can find that here.
or you can use kies to do an emergency firmware update. It will blitz everything on your phone (except your external memory) and reinstall android version 4.1.2. Then you can root properly and know nothing is botched up.
To update to latest firmware (from any rom even rooted)
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL AT&T firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
To root the stock 4.1.2 rom
1. Use Odin 1.85 in Admin Mode for Windows users.
2. Install TWRP 2.5 via PDA settings.
3. Reboot phone into Recovery.
4. Install SuperSU via the Zip.
5. Reboot phone and Presto!
Your now on the latest software for the i717, rooted, and have twrp recovery installed. Enjoy or flash any rom of your choice!
440bro said:
You can try using odin and flashing the twrp tar file and you can find that here.
or you can use kies to do an emergency firmware update. It will blitz everything on your phone (except your external memory) and reinstall android version 4.1.2. Then you can root properly and know nothing is botched up.
To update to latest firmware (from any rom even rooted)
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL AT&T firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
To root the stock 4.1.2 rom
1. Use Odin 1.85 in Admin Mode for Windows users.
2. Install TWRP 2.5 via PDA settings.
3. Reboot phone into Recovery.
4. Install SuperSU via the Zip.
5. Reboot phone and Presto!
Your now on the latest software for the i717, rooted, and have twrp recovery installed. Enjoy or flash any rom of your choice!
Click to expand...
Click to collapse
thanks! being a noob, when i goto the teamwin link i download the only 2 downloads they have there...1 is the goo zip the other says it's the twrp zip. i put them in a twrp folder i made and unzip them both there (since i am not sure which is neededwith 7zip. when i go into odin mode, i click pda and when it goes to open the needed file in that twrp folder i made it only sees an MD5 file and when i click that, odin freezes (Not Responding) and i have to force it closed. am i missing something?
thankx in advance for any assistance :cyclops:
ARTAQaf said:
thanks! being a noob, when i goto the teamwin link i download the only 2 downloads they have there...1 is the goo zip the other says it's the twrp zip. i put them in a twrp folder i made and unzip them both there (since i am not sure which is neededwith 7zip. when i go into odin mode, i click pda and when it goes to open the needed file in that twrp folder i made it only sees an MD5 file and when i click that, odin freezes (Not Responding) and i have to force it closed. am i missing something?
thankx in advance for any assistance :cyclops:
Click to expand...
Click to collapse
I see more than 2 options for downloads in twrp. The one you should be using with odin is this one http://goo.im/devs/OpenRecovery/sgh-i717/openrecovery-twrp-2.5.0.0-quincyatt.img.tar
don't unzip, open, or do anything with it. Just place it in the PDA section of odin and hit start.
If that fails use kies.
that file i cant find on the link, but thanks 440!!! Odin would get stuck at "Setup connection," so it wasn't working. tried it again and it said it did work, "passed," but still no changes from tthe CM10 loop.
i was desperate not to use Kies and lose everything. so i started messing around with different buttons. i pressed and held both volume buttons and power button again...it powered off and nothing. tried it again and this time i saw the teamwin logo!! i was able to then click restore on the Gnote's screen and now it is restoring my twrp back up from yesterday. i guess that last attempt on Odin paid off.
just rebooted it and voila, all is perfect again.
thanks for your quick assistance 440!!! :good::good::good:
so now if i try CM10 again, when i "wipe" it (i think that is the wording) will that wipe all my txt's, call history, photos, contacts, S memo's, etc...???
ARTAQaf said:
that file i cant find on the link, but thanks 440!!! Odin would get stuck at "Setup connection," so it wasn't working. tried it again and it said it did work, "passed," but still no changes from tthe CM10 loop.
i was desperate not to use Kies and lose everything. so i started messing around with different buttons. i pressed and held both volume buttons and power button again...it powered off and nothing. tried it again and this time i saw the teamwin logo!! i was able to then click restore on the Gnote's screen and now it is restoring my twrp back up from yesterday. i guess that last attempt on Odin paid off.
just rebooted it and voila, all is perfect again.
thanks for your quick assistance 440!!! :good::good::good:
so now if i try CM10 again, when i "wipe" it (i think that is the wording) will that wipe all my txt's, call history, photos, contacts, S memo's, etc...???
Click to expand...
Click to collapse
Before you wipe make sure to do a complete back up, download sms backup or super backup to back up contacts, texts etc... Download app2zip or Titanium to back up your apps.
Here's the process I go through each time. Each time you will lose everything but is safer and have a better chance of not failing:
In TWRP
Factory reset
Wipe System
Wipe cache and dalvik cache
Install your rom and the gapps
Wipe cache and dalvik again
reboot and let the phone sit for about 10mins, then reboot again and all should be good.
Once phone is up and running, if you did app2zip to back up your apps, you have to go back into recovery and flash that zip and install the backups from sms backup or super backup for your contacts, texts etc....
Hope that helped some.
Guys, i tried to used TWRP but unable to find the right way to root it. So i decided to bring it back to stock recovery.
But after flashing when i checked the status of my software, it states "Custom", how can i bring it back to "Official" status??
Im now using stock recovery, SM-G610Y - J7 Prime
Please advise how.
atocruz said:
Guys, i tried to used TWRP but unable to find the right way to root it. So i decided to bring it back to stock recovery.
But after flashing when i checked the status of my software, it states "Custom", how can i bring it back to "Official" status??
Im now using stock recovery, SM-G610Y - J7 Prime
Please advise how.
Click to expand...
Click to collapse
You have to flash stock firmware.So there are steps to flash stock firmware.
1.first download odin & stock firmware.( Stock firmware link - https://trueandroid.com/en/samsung-galaxy-j7-prime-sm-g610y-latest-stock-firmware-download-guide/ ))
2.then Go to download mode by pressing VOLUME DOWN + HOME + POWER BUTTON same time untill you see android logo after that press VOLUME UP button then your phone is in download mode .
3.Now run Odin & connect your ohone with pc .On odin it is showing that it is connected then dont touch anything in select PDA file when it select then choose the firmware file downloaded from link .But before selecting extract the file after extraction the file format will will be. tar.
4.Now click on start.
5.You have succesfully flash stock firmware.
raosahab said:
You have to flash stock firmware.So there are steps to flash stock firmware.
Click to expand...
Click to collapse
sir i am on may 1 android security patch level and i want to play pokemon go with joystick which is only possible on before march 1 android security patch level, is there any method for downgrading (with/without root)?
raosahab said:
You have to flash stock firmware.So there are steps to flash stock firmware.
1.first download odin & stock firmware.( Stock firmware link - https://trueandroid.com/en/samsung-galaxy-j7-prime-sm-g610y-latest-stock-firmware-download-guide/ ))
2.then Go to download mode by pressing VOLUME DOWN + HOME + POWER BUTTON same time untill you see android logo after that press VOLUME UP button then your phone is in download mode .
3.Now run Odin & connect your ohone with pc .On odin it is showing that it is connected then dont touch anything in select PDA file when it select then choose the firmware file downloaded from link .But before selecting extract the file after extraction the file format will will be. tar.
4.Now click on start.
5.You have succesfully flash stock firmware.
Click to expand...
Click to collapse
Will it reset my knox?
EDUCATIONAL PURPOSES ONLY
pre-reqs
boost mobile samsung galaxy j3 emerge (SM-J327P) with latest OTA installed
latest stock rom, useful to recover from bricks
latest smart switch for pc from samsung official site, this package includes drivers
latest Odin
latest magisk.zip on sdcard
twrp_3.1.0-1_j327p_14317.tar
reverting to stock
1. install stock via odin (bl,ap,cp,csc options: autoreboot, nand erase, re-partition, f. reset time), reboot allow stock recovery to finish install
rooting with magisk
1. enable oem unlocking in developer mode
2. boot to download mode
3. install twrp via odin (ap options: auto reboot, f. reset time), reboot to recovery
4. using twrp recovery, format data
5. install magisk from sdcard
6. wipe caches, reboot to system
notes
1. if odin fails to transfer rom most likely you didnt select all required files in odin: BL, AP, CP and CSC OR wrong version of stock rom is being used, must match version currently on device, if in doubt try them all until one allows odin to finish install.
2. vol+ home power -boots to recovery
3. vol- home power -boots to download mode
4. if wifi or mobile data doesn't work in android, you didn't select all required files in odin: BL, AP, CP and CSC need to be selected appropriately.
Does this work with the J327P AQJ3?
Sorry to drag a already re dug post but, I find myself with a j327ti
Just started looking but this seems the closest to my model number.
I know Odin well use it on s2, s3, s4, but haven't done much in this area for years
I'm sure my forum etiquette sux, so I apologize in advance
gigabitfx said:
EDUCATIONAL PURPOSES ONLY
pre-reqs
boost mobile samsung galaxy j3 emerge (SM-J327P) with latest OTA installed
latest stock rom, useful to recover from bricks
latest smart switch for pc from samsung official site, this package includes drivers
latest Odin
latest magisk.zip on sdcard
twrp_3.1.0-1_j327p_14317.tar
reverting to stock
1. install stock via odin (bl,ap,cp,csc options: autoreboot, nand erase, re-partition, f. reset time), reboot allow stock recovery to finish install
rooting with magisk
1. enable oem unlocking in developer mode
2. boot to download mode
3. install twrp via odin (ap options: auto reboot, f. reset time), reboot to recovery
4. using twrp recovery, format data
5. install magisk from sdcard
6. wipe caches, reboot to system
notes
1. if odin fails to transfer rom most likely you didnt select all required files in odin: BL, AP, CP and CSC OR wrong version of stock rom is being used, must match version currently on device, if in doubt try them all until one allows odin to finish install.
2. vol+ home power -boots to recovery
3. vol- home power -boots to download mode
4. if wifi or mobile data doesn't work in android, you didn't select all required files in odin: BL, AP, CP and CSC need to be selected appropriately.
Click to expand...
Click to collapse
k9r4n14 said:
Does this work with the J327P AQJ3?
Click to expand...
Click to collapse
Yes it does. I have the QL3 but upgraded to the ARC1 software, but works perfectly either way. Just don't downgrade from ARC1 to QL3, the otherwise you will break the WiFi and 4G data connections modem.
j327a
does this work with samsung j327a?